Citation Impact
Citing Papers
Intraoral scanners in dentistry: a review of the current literature
2017 Standout
Intraoral determination of the tolerance of dentists for perceptibility and acceptability of shade mismatch
2007 Standout
The Use of Digital Impressions to Fabricate Tooth‐Supported Partial Removable Dental Prostheses: A Clinical Report
2015
Laser Welding of Titanium and Dental Precious Alloys
2004
Cutting efficiency of air-turbine burs on cast titanium and dental casting alloys
2000
Mechanical properties of composite resin blocks for CAD/CAM
2014 Standout
All‐ceramic fixed partial dentures designed according to the DC‐Zirkon® technique. A 2‐year clinical study
2005
Dental ceramics: current thinking and trends
2004
ZrO2 three‐unit fixed partial dentures: comparison of failure load before and after exposure to a mastication simulator
2007
A review of dental CAD/CAM: current status and future perspectives from 20 years of experience
2009 Standout
Digital versus conventional impressions for fixed prosthodontics: A systematic review and meta-analysis
2016
The Potential for Bonding Titanium Restorations
1993
In vitro evaluation of shear bond strengths of resin to densely-sintered high-purity zirconium-oxide ceramic after long-term storage and thermal cycling
2004
Recent Developments in Restorative Dental Ceramics
1993
Clinical Application of Stereolithographic Surgical Guides for Implant Placement: Preliminary Results
2005
Accuracy of digital models obtained by direct and indirect data capturing
2012
Accuracy of computer-aided design/computer-aided manufacturing–generated dental casts based on intraoral scanner data
2014
Comparison of digital and conventional impression techniques: evaluation of patients’ perception, treatment comfort, effectiveness and clinical outcomes
2014 Standout
Advancements in CAD/CAM technology: Options for practical implementation
2016 Standout
Application of laser measuring, numerical simulation and rapid prototyping to titanium dental castings
2001
Effects of sandblasting and silica-coating procedures on pure titanium
1994
Current ceramic materials and systems with clinical recommendations: A systematic review
2007 Standout
Effect of sandblasting on the long‐term performance of dental ceramics
2004 Standout
Marginal fit and short-term clinical performance of porcelain-veneered CICERO, CEREC, and Procera onlays
2000
Reliability and validity of intraoral and extraoral scanners
2015
CAD/CAM systems available for the fabrication of crown and bridge restorations
2011
Marginal accuracy of titanium copings fabricated by casting and CAD/CAM techniques
2006
Computer-aided design and fabrication of dental restorations
2006
Six‐year follow‐up of titanium and high‐gold porcelain‐fused‐to‐metal fixed partial dentures
1999
Strength and reliability of four-unit all-ceramic posterior bridges
2005
Resin-ceramic bonding: A review of the literature
2003 Standout
Precision of intraoral digital dental impressions with iTero and extraoral digitization with the iTero and a model scanner
2013
Digital dentistry: an overview of recent developments for CAD/CAM generated restorations
2008 Standout
Immediately loaded CAD-CAM manufactured fixed complete dentures using flapless implant placement procedures: A cohort study of consecutive patients
2007
Definition and prevalence of peri‐implant diseases
2008 Standout
Precision of fit and clinical evaluation of all‐ceramic full restorations followed between 0·5 and 5 years
2004
Comparison of digital intraoral scanner reproducibility and image trueness considering repetitive experience
2017
Effect of loading method on the fracture mechanics of two layered all-ceramic restorative systems
2006
A selective laser sintering prototype guide used to fabricate immediate interim fixed complete arch prostheses in flapless dental implant surgery: Technique description and clinical results
2016
Accuracy and Complications of Computer‐Designed Selective Laser Sintering Surgical Guides for Flapless Dental Implant Placement and Immediate Definitive Prosthesis Installation
2011
The efficacy of posterior three-unit zirconium-oxide–based ceramic fixed partial dental prostheses: A prospective clinical pilot study
2006 Standout
Bond strength of a new universal self-adhesive resin luting cement to dentin and enamel
2005
3D-printing techniques in a medical setting: a systematic literature review
2016 Standout
Accuracy of complete-arch dental impressions: A new method of measuring trueness and precision
2013 Standout
3D printed versus conventionally cured provisional crown and bridge dental materials
2017 Standout
Precision of fit: The Procera AllCeram crown
1998
Assessing the feasibility and accuracy of digitizing edentulous jaws
2013
Prospective clinical 5-year study of ceramic-veneered titanium restorations with the procera system
2000
Accuracy of dental digitizers
2006
All-ceramic or metal-ceramic tooth-supported fixed dental prostheses (FDPs)? A systematic review of the survival and complication rates. Part I: Single crowns (SCs)
2015 Standout
A systematic review of the survival and complication rates of all‐ceramic and metal–ceramic reconstructions after an observation period of at least 3 years. Part I: single crowns
2007
Accuracy of implant placement based on pre‐surgical planning of three‐dimensional cone‐beam images: a pilot study
2007
Clinical fit of Procera AllCeram crowns
2000
Comparison of the marginal fit of lithium disilicate crowns fabricated with CAD/CAM technology by using conventional impressions and two intraoral digital scanners
2015
Marginal and internal adaptation of ceramic crown restorations fabricated with CAD/CAM technology and the heat-press technique
2014
State of the art of zirconia for dental applications
2007 Standout
Fatigue of dental ceramics
2013
Laser‐Welded Titanium Frameworks Supported by Implants in the Partially Edentulous Mandible: A 10‐Year Comparative Follow‐Up Study
2008
Flexural strength of a layered zirconia and porcelain dental all-ceramic system
2005
An overview of zirconia ceramics: Basic properties and clinical applications
2007 Standout
Scanning accuracy and precision in 4 intraoral scanners: An in vitro comparison based on 3-dimensional analysis
2014
Fabricating complete dentures with CAD/CAM technology
2014
Retrospective assessment of 546 all-ceramic anterior and posterior crowns in a general practice
2001
The fit of cobalt–chromium three-unit fixed dental prostheses fabricated with four different techniques: A comparative in vitro study
2010
Direct mechanical data acquisition of dental impressions for the manufacturing of CAD/CAM restorations
2007
Contemporary materials and technologies for all-ceramic fixed partial dentures: A review of the literature
2004
Three-Dimensional Plotting and Printing of an Implant Drilling Guide: Simplifying Guided Implant Surgery
2013
The future of dental devices is digital
2011 Standout
Evaluation of fit and efficiency of CAD/CAM fabricated all-ceramic restorations based on direct and indirect digitalization: a double-blinded, randomized clinical trial
2015
A systematic review of the survival and complication rates of all‐ceramic and metal–ceramic reconstructions after an observation period of at least 3 years. Part II: fixed dental prostheses.
2007 Standout
Descriptive Analysis of Implant and Prosthodontic Survival Rates With Fixed Implant–Supported Rehabilitations in the Edentulous Maxilla
2009
Modern dental imaging: a review of the current technology and clinical applications in dental practice
2010
3D printing in dentistry
2015 Standout
The safety and efficacy of anterior ceramic fixed partial dentures: A review of the literature
2001
Fracture resistance of yttrium oxide partially-stabilized zirconia all-ceramic bridges after veneering and mechanical fatigue testing
2004
Effect of surface reaction layer on grindability of cast titanium alloys
2005
Effect of digitizing techniques on the fit of implant-retained crowns with different antirotational abutment features
2013
Contemporary all-ceramic fixed partial dentures: a review
2004
Clinical results of lithium-disilicate crowns after up to 9 years of service
2012
Transverse fracture of brittle bilayers: Relevance to failure of all‐ceramic dental crowns
2006
Self-adhesive resin cements - chemistry, properties and clinical considerations
2010 Standout
Clinical Experiences with Laser‐Welded Titanium Frameworks Supported by Implants in the Edentulous Mandible: A 10‐Year Follow‐Up Study
2006
Dental luting agents: A review of the current literature
1998 Standout
Clinical complications in fixed prosthodontics
2003
Use of contact testing in the characterization and design of all-ceramic crownlike layer structures: A review
2001
Clinical Experiences of Implant‐Supported Prostheses with Laser‐Welded Titanium Frameworks in the Partially Edentulous Jaw: A 5‐Year Follow‐up Study
1999
Computer-designed selective laser sintering surgical guide and immediate loading dental implants with definitive prosthesis in edentulous patient: A preliminary method
2014
Rapid investment casting: direct and indirect approaches via model maker II
2004 Standout
Systematic review of survival rates for immediately loaded dental implants.
2006
Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
2017 Standout
An in vitro evaluation of titanium, zirconia, and alumina procera abutments with hexagonal connection.
2006
A longitudinal clinical study of Procera ceramic-veneered titanium copings.
1999
The evolution of rapid prototyping in dentistry: a review
2009
Use of models in surgical predictability of oral rehabilitations
2007
A systematic review of the survival and complication rates of implant‐supported fixed dental prostheses (FDP s) after a mean observation period of at least 5 years
2012 Standout
Fit of CAD/CAM Implant Frameworks: A Comprehensive Review
2014
Digital vs. conventional implant impressions: efficiency outcomes
2012
Accuracy of digital versus conventional implant impressions
2014
Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids
2012 Standout
Intraoral Digital Impression Technique: A Review
2014
Patient‐centered outcomes comparing digital and conventional implant impression procedures: a randomized crossover trial
2015
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
2004 Standout
Novel Method of Fabricating Individual Trays for Maxillectomy Patients by Computer‐Aided Design and Rapid Prototyping
2014
The Effect of Resin Bonding on Long-Term Success of High-Strength Ceramics
2017
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
Novel Zirconia Materials in Dentistry
2017 Standout
Five-year clinical results of zirconia frameworks for posterior fixed partial dentures.
2007 Standout
Two years of clinical experience with Procera titanium crowns.
1998
A new all-ceramic crown: A dense-sintered, high-purity alumina coping with porcelain
1993
THE CLINICAL PERFORMANCE OF CAD-CAM–GENERATED CERAMIC INLAYS: A FOUR-YEAR STUDY
1996
Survival rates of IPS empress 2 all-ceramic crowns and fixed partial dentures: results of a 5-year prospective clinical study.
2006
Coronavirus Disease 2019 (COVID-19): Emerging and Future Challenges for Dental and Oral Medicine
2020 Standout
Trends in Computer-Aided Manufacturing in Prosthodontics: A Review of the Available Streams
2014
The Combination of Digital Surface Scanners and Cone Beam Computed Tomography Technology for Guided Implant Surgery Using 3Shape Implant Studio Software: A Case History Report
2015
A comparison of the marginal fit of In-Ceram, IPS Empress, and Procera crowns.
1998
A comparison of the precision of three-dimensional images acquired by 2 digital intraoral scanners: effects of tooth irregularity and scanning direction
2016
Reliability of Implant Placement With Stereolithographic Surgical Guides Generated From Computed Tomography: Clinical Data From 94 Implants
2008
Relative translucency of six all-ceramic systems. Part I: Core materials
2002 Standout
Works of Matts Andersson being referenced
Computer aided analysis of digitized dental stone replicas by dental CAD/CAM technology
2008
The accuracy of a high-precision digitizer for CAD/CAM of crowns
1995
A three-dimensional evaluation of a laser scanner and a touch-probe scanner
2006
A Computed Tomographic Scan–Derived Customized Surgical Template and Fixed Prosthesis for Flapless Surgery and Immediate Loading of Implants in Fully Edentulous Maxillae: A Prospective Multicenter Study
2005
Laser welding of titanium in dentistry
1988
Digitization of simulated clinical dental impressions: Virtual three-dimensional analysis of exactness
2009
Accuracy of machine milling and spark erosion with a CAD/CAM system
1996
A 2-year follow-up study of titanium crowns
1990
Clinical results with titanium crowns fabricated with machine duplication and spark erosion
1989
Five-year clinical evaluation of Procera AllCeram crowns
1998
All-ceramic crowns and preparation characteristics: a mathematic approach.
2003
A custom template and definitive prosthesis allowing immediate implant loading in the maxilla: a clinical report.
2003