Citation Impact
Citing Papers
Biological consequences of global warming: is the signal already apparent?
2000 Standout
Climate change and its impacts on glaciers and permafrost in the Alps
1998
System for Automated Geoscientific Analyses (SAGA) v. 2.1.4
2015 Standout
Ultrafast laser processing of materials: from science to industry
2016 Standout
LAMMPS - a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales
2021 Standout
Demystifying vulnerability assessment of agriculture communities in the Himalayas: a systematic review
2017
The State of Remote Sensing Capabilities of Cascading Hazards Over High Mountain Asia
2019
Locating and classifying fluorescent tags behind turbid layers using time-resolved inversion
2015 StandoutNobel
Reconstruction of a glacial lake outburst flood (GLOF) in the Engaño Valley, Chilean Patagonia: Lessons for GLOF risk management
2015
Resistive-Heating or Forced-Air Warming for the Prevention of Redistribution Hypothermia
2010
Additively manufactured hierarchical stainless steels with high strength and ductility
2017 Standout
Processing of Bulk Metallic Glass
2009 Standout
The path towards sustainable energy
2016 StandoutNobel
State of science: mental workload in ergonomics
2014 Standout
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
2016 Standout
Landslide triggering by rain infiltration
2000 Standout
Laser material processing
2011 Standout
Reduction of micro-cracking in nickel superalloys processed by Selective Laser Melting: A fundamental alloy design approach
2015
A review of statistically-based landslide susceptibility models
2018 Standout
Microstructural and hardness investigation of an aluminum–copper alloy processed by laser surface melting
2003
Glacier surface-area changes in Sagarmatha national park, Nepal, in the second half of the 20th century, by comparison of historical maps
2008
Thermo-mechanical model development and validation of directed energy deposition additive manufacturing of Ti–6Al–4V
2014
Review of temperature measurement
2000 Standout
A comparative study on the predictive ability of the decision tree, support vector machine and neuro-fuzzy models in landslide susceptibility mapping using GIS
2012 Standout
Combining airborne and terrestrial laser scanning for quantifying erosion and deposition by a debris flow event
2011
Analysis and Numerical Approximation of an Integro-differential Equation Modeling Non-local Effects in Linear Elasticity
2005
Simultaneous single-shot imaging of OH and O2 using a two-wavelength excimer laser
1990 StandoutNobel
Climate Change 2022 – Impacts, Adaptation and Vulnerability
2023 Standout
GIS modelling of slope stability in Phewa Tal watershed, Nepal
1998
Laser induced fluorescence spectroscopy in flames
1997
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Phase-Field Models for Microstructure Evolution
2002 Standout
Two-dimensional measurement of density, velocity, and temperature in turbulent high-speed air flows by UV rayleigh scattering
1990
Recent climatic change and catastrophic geomorphic processes in mountain environments
1994
Quantitative flow visualization technique for measurements in combustion gases
1984
Climatic Change in Mountain Regions: A Review of Possible Impacts
2003 Standout
The microstructure of rapidly solidified AlFe alloys subjected to laser surface treatment
1990
Geomorphological mapping with a small unmanned aircraft system (sUAS): Feature detection and accuracy assessment of a photogrammetrically-derived digital terrain model
2013 Standout
Towards an early‐warning system for global landslides triggered by rainfall and earthquake
2007
Non-equilibrium solidification of undercooled metallic metls
1994
Direct femtosecond laser surface nano/microstructuring and its applications
2012
The improvement of localized corrosion resistance in sensitized stainless steel by laser surface remelting
1998
Absolute Temperature Fields in Flames by 2D‐LIF of OH Using Excimer Lasers and CARS Spectroscopy
1992 StandoutNobel
Kinetics of phase transformations in the peridynamic formulation of continuum mechanics
2006
Rainfall thresholds for the initiation of landslides in central and southern Europe
2007
‘Structure-from-Motion’ photogrammetry: A low-cost, effective tool for geoscience applications
2012 Standout
Modeling of fundamental phenomena in welds
1995
Landslide hazard evaluation: a review of current techniques and their application in a multi-scale study, Central Italy
1999 Standout
Impact of forest fires on geomorphic processes in the tyrolean limestone alps
2012
Identification of glacier motion and potentially dangerous glacial lakes in the Mt. Everest region/Nepal using spaceborne imagery
2008
The rainfall intensity–duration control of shallow landslides and debris flows: an update
2007 Standout
A meshfree method based on the peridynamic model of solid mechanics
2005 Standout
Colloid osmotic pressure and extravasation of plasma proteins following infusion of Ringer's acetate and hydroxyethyl starch 130/0.4
2015 StandoutNobel
Chemical-assisted femtosecond laser writing of lab-in-fibers
2014
Ice, moraine, and landslide dams in mountainous terrain
2007
Reactive species in non-equilibrium atmospheric-pressure plasmas: Generation, transport, and biological effects
2016 Standout
UAV RTK/PPK Method—An Optimal Solution for Mapping Inaccessible Forested Areas?
2019 Standout
The physics of debris flows
1997 Standout
Laser Repetitive Pulse Heating of Steel Surface: A Material Response to Thermal Loading
2002
The State and Fate of Himalayan Glaciers
2012 StandoutScience
The effect of long-range forces on the dynamics of a bar
2004
Peridynamic States and Constitutive Modeling
2007 Standout
Volume Kinetics for Infusion Fluids
2010
Guidelines for Perioperative Care in Elective Colonic Surgery: Enhanced Recovery After Surgery (ERAS®) Society Recommendations
2012 Standout
Interface attachment kinetics in alloy solidification
1996
Review of Earth science research using terrestrial laser scanning
2017 Standout
Combustion diagnostics: Planar imaging techniques
1988
Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
2012 Standout
Laser treatment of aluminium copper alloys: A mechanical enhancement
1994
Peridynamic modeling of membranes and fibers
2004
Digital twin paradigm: A systematic literature review
2021 Standout
Patterns and controls of sediment production, transfer and yield in the Illgraben
2012
Solidification microstructures: recent developments, future directions
2000
Potential Impact of Climate Change on Vegetation in the European Alps: A Review
2001 Standout
Guidelines for Perioperative Care in Elective Rectal/Pelvic Surgery: Enhanced Recovery After Surgery (ERAS®) Society Recommendations
2012 Standout
Instantaneous temperature field measurements using planar laser-induced fluorescence
1985
Microstructure and corrosion properties of laser surface processed aluminium alloys: a review
1997
An overview of glacial hazards in the Himalayas
2000
Residual stress and its role in failure
2007 Standout
Hierarchical micro and nano structured, hydrophilic, superhydrophobic and superoleophobic surfaces incorporated in microfluidics, microarrays and lab on chip microsystems
2014
Viscoplasticity using peridynamics
2009
The Varnes classification of landslide types, an update
2013 Standout
Determination of the third velocity component with PTA using an intensity graded light sheet
1992 StandoutNobel
Maximum Temperature Trends in the Himalaya and Its Vicinity: An Analysis Based on Temperature Records from Nepal for the Period 1971–94
1999
DEBRIS-FLOW MOBILIZATION FROM LANDSLIDES
1997
Different glacier status with atmospheric circulations in Tibetan Plateau and surroundings
2012 Standout
Exceedingly small iron oxide nanoparticles as positive MRI contrast agents
2017 StandoutNobel
Photothermal Nanomaterials: A Powerful Light-to-Heat Converter
2023 Standout
Diagrams for laser materials processing
1992
An evaluation of the effectiveness of low-cost UAVs and structure from motion for geomorphic change detection
2016 Standout
Laser surface alloying of aluminum on copper substrate
1994
A simple but realistic model for laser cladding
1994
Influence of the overlapped area on the corrosion behaviour of laser treated aluminium alloys
1998
Microstructural evolution and mechanical properties of Ti–Zr beta titanium alloy after laser surface remelting
2013
The physical character of subaqueous sedimentary density flows and their deposits
2001 Standout
Phase-Field Simulation of Solidification
2002 Standout
Localized corrosion of laser surface melted 2024-T351 aluminium alloy
1996
Glacial lake outburst flood risk in Himachal Pradesh, India: an integrative and anticipatory approach considering current and future threats
2016
Works of Markus Zimmermann being referenced
The Impact of Acoustic Stimulation on the AEP Monitor/2 Derived Composite Auditory Evoked Potential Index Under Awake and Anesthetized Conditions
2005
Rapid solidification of Al-Cu eutectic alloy by laser remelting
1989
The 1987 debris flows in Switzerland: documentation and analysis
1993
Valves for autonomous capillary systems
2008
Separation of time-averaged turbulence components by laser-induced fluorescence
1983
About the banded structure in rapidly solidified dendritic and eutectic alloys
1992
Mountain Hazards Mapping in the Khumbu Himal, Nepal
1986
Debris flows 1987 in Switzerland: Geomorphological and meteorological aspects
1990
Convective air warming is more effective than resistive heating in an experimental model with a water dummy
2004
International Frameworks for Disaster Risk Reduction: Useful Guidance for Sustainable Mountain Development?
2015
Heat-flow simulation of laser remelting with experimenting validation
1991
Supersonic-nitrogen flow-field measurements with the resonant Doppler velocimeter
1983
Investigation of 1987 debris flows in the Swiss Alps: General concept and geophysical soundings
1990
Laser resolidification of the AlAl2Cu eutectic: The coupled zone
1992
Quantitative flow visualization in sodium vapor seeded hypersonic helium
1978
Untersuchungen zur Murgangaktivität im Mattertal, Wallis, Schweiz
1996
Characterization of the banded structure in rapidly solidified AlCu alloys
1991
Deformation of a Peridynamic Bar
2003
The 1985 Catastrophic Drainage of a Moraine-Dammed Lake, Khumbu Himal, Nepal: Cause and Consequences
1987
WHAT IS A DIGITAL TWIN? – DEFINITIONS AND INSIGHTS FROM AN INDUSTRIAL CASE STUDY IN TECHNICAL PRODUCT DEVELOPMENT
2020
Murganggefahr und Klimaänderung - ein GIS-basierter Ansatz
1997