Citation Impact
Citing Papers
Photovoltaic power systems: A review of topologies, converters and controls
2012
Condition Monitoring of Bearing Damage in Electromechanical Drive Systems by Using Motor Current Signals of Electric Motors: A Benchmark Data Set for Data-Driven Classification
2016
Deep learning algorithms for rotating machinery intelligent diagnosis: An open source benchmark study
2020 Standout
Inertia and Friction Estimation of a Velocity-Controlled Servo Using Position Measurements
2014
An Improved FCS–MPC Algorithm for an Induction Motor With an Imposed Optimized Weighting Factor
2011
SVM-DS fusion based soft fault detection and diagnosis in solar water heaters
2018 Standout
Sliding-Mode-Based Control for a Three-Level Inverter Drive
2008
Sustainable urban rail systems: Strategies and technologies for optimal management of regenerative braking energy
2013 Standout
Sensorless Model Predictive Direct Current Control Using Novel Second-Order PLL Observer for PMSM Drive Systems
2010
Predictive Strategy to Control Common-Mode Voltage in Loads Fed by Matrix Converters
2008
Overview of Permanent-Magnet Brushless Drives for Electric and Hybrid Electric Vehicles
2008 Standout
Artificial intelligence for fault diagnosis of rotating machinery: A review
2018 Standout
Future on Power Electronics for Wind Turbine Systems
2013 Standout
Design and Implementation of Model Predictive Control for Electrical Motor Drives
2008
Technology Readiness Assessment of Model Predictive Control in Medium- and High-Voltage Power Electronics
2016
Overview of Stator-Permanent Magnet Brushless Machines
2011 Standout
Predictive Torque Control of Induction Machines Based on State-Space Models
2009
High-power wind energy conversion systems: State-of-the-art and emerging technologies
2015 Standout
Design and Implementation of Terminal Sliding Mode Control Method for PMSM Speed Regulation System
2012 Standout
Recent Advances and Industrial Applications of Multilevel Converters
2010 Standout
Direct torque and flux regulation of synchronous reluctance motor drives based on input–output feedback linearization
2009
Control of High-Speed Solid-Rotor Synchronous Reluctance Motor/Generator for Flywheel-Based Uninterruptible Power Supplies
2008
Advanced PWM and Predictive Control—An Overview
2015
Predictive Control Strategy for DC/AC Converters Based on Direct Power Control
2007
Model Predictive Control for Power Converters and Drives: Advances and Trends
2016 Standout
A review of sensorless control methods for AC motor drives
2018 Standout
Predictive Current Control Strategy With Imposed Load Current Spectrum
2008
Multilevel Optimal Predictive Dynamic Voltage Restorer
2009
Overview of Electric Motor Technologies Used for More Electric Aircraft (MEA)
2011 Standout
Improved Active Power Filter Performance for Renewable Power Generation Systems
2013
Recent Advances in the Design, Modeling, and Control of Multiphase Machines—Part I
2015 Standout
Predictive Current Control of an Induction Machine Fed by a Matrix Converter With Reactive Power Control
2008
Cascaded H-bridge multilevel converter multistring topology for large scale photovoltaic systems
2011
A Comparative Study of Predictive Current Control Schemes for a Permanent-Magnet Synchronous Machine Drive
2009
Robust Cascaded Nonlinear Predictive Control of a Permanent Magnet Synchronous Motor With Antiwindup Compensator
2011
Renewable energy resources: Current status, future prospects and their enabling technology
2014 Standout
Multilevel Multiphase Space Vector PWM Algorithm
2008
An Embedded Frequency Response Analyzer for Fuel Cell Monitoring and Characterization
2009
Medium-Voltage Multilevel Converters—State of the Art, Challenges, and Requirements in Industrial Applications
2010
Using Full Order and Reduced Order Observers for Robust Sensorless Predictive Torque Control of Induction Motors
2011
State of the Art of Finite Control Set Model Predictive Control in Power Electronics
2012 Standout
Discrete-Time Observer Design for Sensorless Synchronous Motor Drives
2016
Switching Frequency Reduction Using Model Predictive Direct Current Control for High-Power Voltage Source Inverters
2010
Distributed Digital Control of Modular-Based Solid-State Transformer Using DSP+FPGA
2012
Optimal Predictive Control of Three-Phase NPC Multilevel Converter for Power Quality Applications
2008
A Survey on Neutral-Point-Clamped Inverters
2009 Standout
An Enhanced Predictive Current Control Method for Asymmetrical Six-Phase Motor Drives
2010
Multi-phase current control using finite-state model-predictive control
2008
Predictive Stator Current Control for Medium Voltage Drives With LC Filters
2009
Application of the Kalman Filters to the High-Performance Drive System With Elastic Coupling
2012
Automotive Electric Propulsion Systems With Reduced or No Permanent Magnets: An Overview
2014 Standout
Predictive Control of an Induction Machine Fed by a Matrix Converter With Increased Efficiency and Reduced Common-Mode Voltage
2014
A review of vibration-based damage detection in civil structures: From traditional methods to Machine Learning and Deep Learning applications
2020 Standout
Model Predictive Direct Torque Control—Part I: Concept, Algorithm, and Analysis
2008
Model Predictive Pulse Pattern Control for the Five-Level Active Neutral-Point-Clamped Inverter
2013
Speed and Load Torque Observer Application in High-Speed Train Electric Drive
2009 Standout
A Survey on Wind Turbine Condition Monitoring and Fault Diagnosis—Part I: Components and Subsystems
2015 Standout
Step-Up DC–DC Converters: A Comprehensive Review of Voltage-Boosting Techniques, Topologies, and Applications
2017 Standout
Direct Torque Control of Induction Motors Utilizing Three-Level Voltage Source Inverters
2008
A Review on Basic Data-Driven Approaches for Industrial Process Monitoring
2014 Standout
Adaptive Prescribed Performance Motion Control of Servo Mechanisms with Friction Compensation
2013 Standout
Variable Switching Point Predictive Torque Control of Induction Machines
2014
A Proof of Concept Study of Predictive Current Control for VSI-Driven Asymmetrical Dual Three-Phase AC Machines
2009
Sliding-Mode Control for Systems With Mismatched Uncertainties via a Disturbance Observer
2012 Standout
Evolution of Topologies, Modeling, Control Schemes, and Applications of Modular Multilevel Converters
2017 Standout
Predictive Torque Control of an Induction Machine Fed by a Matrix Converter With Reactive Input Power Control
2010
Speed Control for PMSM Servo System Using Predictive Functional Control and Extended State Observer
2011 Standout
Comparison of Embedded System Design for Industrial Applications
2011 Standout
Multidimensional Modulation Technique for Cascaded Multilevel Converters
2010
Predictive Control in Power Electronics and Drives
2008
An RMRAC Current Regulator for Permanent-Magnet Synchronous Motor Based on Statistical Model Interpretation
2009
Direct Voltage Control of DC–DC Boost Converters Using Enumeration-Based Model Predictive Control
2013
Predictive Control of an Indirect Matrix Converter
2009
A Review of Fault Detection and Diagnosis for the Traction System in High-Speed Trains
2019 Standout
Review of wave energy technologies and the necessary power-equipment
2013 Standout
Applications of machine learning to machine fault diagnosis: A review and roadmap
2020 Standout
Three-Level NPC Converter-Based Predictive Direct Power Control of the Doubly Fed Induction Machine at Low Constant Switching Frequency
2008
Robust Nonlinear Predictive Controller for Permanent-Magnet Synchronous Motors With an Optimized Cost Function
2011
Bearing Fault Diagnosis for Direct-Drive Wind Turbines via Current-Demodulated Signals
2013
A Bayesian recursive framework for ball-bearing damage classification in rotating machinery
2016
A Survey of Fault Diagnosis and Fault-Tolerant Techniques—Part I: Fault Diagnosis With Model-Based and Signal-Based Approaches
2015 Standout
Torque Ripple Reduction of the Torque Predictive Control Scheme for Permanent-Magnet Synchronous Motors
2011
Disturbance/Uncertainty Estimation and Attenuation Techniques in PMSM Drives—A Survey
2016 Standout
A Survey on Cascaded Multilevel Inverters
2009 Standout
High-Speed Electrical Machines: Technologies, Trends, and Developments
2013 Standout
Adaptive Robust Control of DC Motors With Extended State Observer
2013
Overview of Multi-MW Wind Turbines and Wind Parks
2011 Standout
A Modified Stationary Reference Frame-Based Predictive Current Control With Zero Steady-State Error for LCL Coupled Inverter-Based Distributed Generation Systems
2010
Capacitor Balance Issues of the Diode-Clamped Multilevel Inverter Operated in a Quasi Two-State Mode
2008
Smoothened Quasi-Time-Optimal Control for the Torsional Torque in a Two-Mass System
2016
Identification of Lamination Stack Properties: Application to High-Speed Induction Motors
2009
Extended-State-Observer-Based Output Feedback Nonlinear Robust Control of Hydraulic Systems With Backstepping
2014 Standout
Predictive torque control with input PF correction applied to an induction machine fed by a matrix converter
2008
Adaptive Robust Precision Motion Control of Systems With Unknown Input Dead-Zones: A Case Study With Comparative Experiments
2010
Model Predictive Control—A Simple and Powerful Method to Control Power Converters
2008 Standout
A Predictive Control Scheme for Current-Source Rectifiers
2008
Discrete-time observer design for sensorless synchronous motor drives
2015
Power Electronic Traction Transformer—Medium Voltage Prototype
2013 Standout
Industrial Applications of the Kalman Filter: A Review
2013 Standout
Trinary Hybrid 81-Level Multilevel Inverter for Motor Drive With Zero Common-Mode Voltage
2008
Plastic Bearing Fault Diagnosis Based on a Two-Step Data Mining Approach
2012
Works of Mario Pacas being referenced
Predictive torque and flux control for the synchronous reluctance machine
2006
Suppression of Saturation Effects in a Sensorless Predictive Controlled Synchronous Reluctance Machine Based on Voltage Space Phasor Injections
2010
Predictive Torque Control for Inverter-Fed Induction Machines
2007
Predictive Direct Torque Control for the PM Synchronous Machine
2005
Frequency Response Analysis for Rolling-Bearing Damage Diagnosis
2008
Application of the Welch-Method for the Identification of Two- and Three-Mass-Systems
2008
Time-Domain Identification Method for Detecting Mechanical Backlash in Electrical Drives
2008
Encoderless Predictive Direct Torque Control for Synchronous Reluctance Machines at Very Low and Zero Speed
2008
Control of a Single-Phase Cascaded H-Bridge Multilevel Inverter for Grid-Connected Photovoltaic Systems
2009
A Predictive Torque Control for the Synchronous Reluctance Machine Taking Into Account the Magnetic Cross Saturation
2007