Citation Impact
Citing Papers
Strategies for improving the sustainability of structural metals
2019 StandoutNature
Degradable metallic biomaterials: Design and development of Fe–Mn alloys for stents
2009
Ab initiolattice stability of fcc and hcp Fe–Mn random alloys
2010
Influence of Structure on Nickel-Titanium Endodontic Instruments Failure
2001 Standout
Design strategy for biodegradable Fe-based alloys for medical applications☆
2009
Development of new metallic alloys for biomedical applications
2012 Standout
Stacking-fault energy and anti-Invar effect in Fe-Mn alloy from first principles
2012
High temperature shape memory alloys
2010
Effects of the thermodynamic parameters of the hcp phase on the stacking fault energy calculations in the Fe–Mn and Fe–Mn–C systems
2010
Influence of cycling on the reversible martensitic transformation and shape memory phenomena in TiNi alloys
1994
A review of shape memory alloy research, applications and opportunities
2013 Standout
Thermodynamic modeling of the stacking fault energy of austenitic steels
2010
Softening behavior by excessive twinning and adiabatic heating at high strain rate in a Fe–20Mn–0.6C TWIP steel
2015
Physical metallurgy of Ti–Ni-based shape memory alloys
2005 Standout
The fatigue behavior of shape-memory alloys
2000
Metastable effects on martensitic transformation in SMA
2009
Dependence of tensile deformation behavior of TWIP steels on stacking fault energy, temperature and strain rate
2010
Nitrogen in chromium–manganese stainless steels: a review on the evaluation of stacking fault energy by computational thermodynamics
2013
Metastable effects on martensitic transformation in SMA
2006
Effects of Mn and Al contents on cryogenic-temperature tensile and Charpy impact properties in four austenitic high-Mn steels
2015 Standout
The influence of stacking fault energy on the microstructural and strain-hardening evolution of Fe–Mn–Al–Si steels during tensile deformation
2015
High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development — properties — application
2000 Standout
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
Derivation and Variation in Composition-Dependent Stacking Fault Energy Maps Based on Subregular Solution Model in High-Manganese Steels
2009 Standout
Gibbs free energy evaluation of the fcc(γ) and hcp(ε) phases in Fe-Mn-Si alloys
1997
Dark state photophysics of nitrogen–vacancy centres in diamond
2012 StandoutNobel
Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe–Mn–C alloys
2004
The austenite/ɛ martensite interface: A first-principles investigation of the fcc Fe(1 1 1)/hcp Fe(0 0 0 1) system
2012
Metastable effects on martensitic transformation in SMA
2006
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
2016 StandoutNature
Universal Symmetry Property of Point Defects in Crystals
2000
A review of dynamic recrystallization phenomena in metallic materials
2016 Standout
Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures
2014 Standout
Healing of fatigue damage in NiTi shape memory alloys
2008
Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging
2011 Standout
Current state of Fe-Mn-Al-C low density steels
2017 Standout
The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy
2013 Standout
Thermodynamic assessment of the Fe–Mn–C system
2011
Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe–Mn–C steel
2007
Mechanism of martensite aging effects and new aspects
2001
Biodegradable metals
2014 Standout
A thermo-mechanical correlation with driving forces for hcp martensite and twin formations in the Fe–Mn–C system exhibiting multicomposition sets
2013
Development and exploration of refractory high entropy alloys—A review
2018 Standout
Nickel-Based Superalloys for Advanced Turbine Engines: Chemistry, Microstructure and Properties
2006 Standout
Improvement of damping properties in laser processed superelastic Cu-Al-Mn shape memory alloys
2016 Standout
Calculation of phase diagrams: Calphad
1996
Metastable effects on martensitic transformation in SMA part VII. Aging problems in NiTi
2008
High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships
2011 Standout
Critical assessment: Martensite-start temperature for the γ → ε
2011
Grain size and pseudoelastic behaviour of a Cu–Al–Be alloy
2007
Twinning-induced plasticity (TWIP) steels
2017 Standout
Residual stress and its role in failure
2007 Standout
Elastic properties of face-centred cubic Fe–Mn–C studied by nanoindentation and ab initio calculations
2012
Review Thermo-mechanical fatigue of shape memory alloys
2004
A fracture-resistant high-entropy alloy for cryogenic applications
2014 StandoutScience
Iron-based shape memory alloy strips for strengthening RC members: Material behavior and characterization
2018 Standout
Automated identification and indexing of dislocations in crystal interfaces
2012 Standout
Iron–manganese: new class of metallic degradable biomaterials prepared by powder metallurgy
2008
The influence of manganese content on the stacking fault and austenite/ε-martensite interfacial energies in Fe–Mn–(Al–Si) steels investigated by experiment and theory
2014
Structural and magnetic ground-state properties ofγ
2011
Applications of shape memory alloys in civil engineering structures—Overview, limits and new ideas
2005 Standout
Works of M. Sade being referenced
Lattice parameters of metastable structures in quenched Fe-Mn alloys. Part II : hcp phase
2001
Lattice parameters of metastable structures in quenched Fe-Mn alloys. Part I : Experimental techniques, bcc and fcc phases
2000
Shape memory alloys: From the physical properties of metastable phase transitions to dampers for civil engineering applications
2004
Pseudoelastic Cycling and Two-Way Shape Memory Effect in β Cu–Zn–Al Alloys with γ-Precipitates
1993
Fatigue in CuZnAl single crystals
1985
Calorimetry under Stress A Preliminary Study in Single Crystalline Cu-Zn-Al Shape Memory Alloys
1999
Composition dependence of surface and bulk defects generated in CuZnAl single crystals after pseudoelastic cycling
1999
Shape memory alloys as an effective tool to damp oscillations
2015
Fatigue and martensitic transitions in Cu–Zn–Al and Cu–Al–Ni single crystals: mechanical behaviour, defects and diffusive phenomena
2007
Pseudoelastic fatigue of CuZnAl single crystals: the effect of concomitant diffusional processes
2000
Fcc/Hcp martensitic transformation in the Fe-Mn system: Part II. Driving force and thermodynamics of the nucleation process
2004
Thermal and Mechanical Fatigue of Shape Memory Alloys
1989
Phase stability and fcc/hcp martensitic transformation in Fe–Mn–Si alloys
1998
The two way shape memory effect in CuZnAl single crystals: role of dislocations and stabilization
1995
Pseudoelastic cycling of ultra-fine-grained NiTi shape-memory wires
2005
<title>Damping via Cu-Zn-Al shape memory alloys (SMA): the action of diffusive effects on the macroscopic description</title>
2002
Transformation behaviour and one-way shape memory effect in Fe-Mn-Si shape memory alloys
1990
Fcc/Hcp martensitic transformation in the Fe-Mn system: Experimental study and thermodynamic analysis of phase stability
1995
Pseudoelastic cycling and ageing effects at ambient temperature in nanocrystalline Ni-rich NiTi wire
2007
Low temperature fatigue in CuZnAl single crystals
1985
Phase stability and fcc/hcp martensitic transformation in Fe–Mn–Si alloys: Part II. Thermodynamic modelling of the driving forces and the MS and AS temperatures
1998
The effect of temperature on pseudoelastic cycling of CuZnAl single crystals
1994