Citation Impact
Citing Papers
Ecological, economical and technological perspectives based sustainability assessment in hybrid-cooling assisted machining of Ti-6Al-4 V alloy
2020
A study on milling of glass fiber reinforced plastics manufactured by hand-lay up using statistical analysis (ANOVA)
2003
Metal additive manufacturing in aerospace: A review
2021 Standout
Tool wear investigation in high-pressure jet coolant assisted machining Ti2AlNb intermetallic alloys based on FEM
2018
Processing of Bulk Metallic Glass
2009 Standout
A Review on the Natural Fiber-Reinforced Polymer Composites for the Development of Roselle Fiber-Reinforced Polyester Composite
2010 Standout
Comparison of tool wear mechanisms and surface integrity for dry and wet micro-drilling of nickel-base superalloys
2013
Artificial intelligence for fault diagnosis of rotating machinery: A review
2018 Standout
Experimental study on turning of TC9 titanium alloy with cold water mist jet cooling
2011
Adiabatic shear band formation as a result of cryogenic CNC machining of elastomers
2011
Application of cutting fluids in machining of titanium alloys—a review
2017
Machining of aluminum alloys: a review
2016
Environment and economic burden of sustainable cooling/lubrication methods in machining of Inconel-800
2020
Milling of titanium alloy with cryogenic cooling and minimum quantity lubrication (MQL)
2017
Machining induced surface integrity in titanium and nickel alloys: A review
2010 Standout
Influence of process parameters on cutting force and torque during drilling of glass–fiber polyester reinforced composites
2005
Machining and ecological effects of a new developed cutting fluid in combination with different cooling techniques on turning operation
2015
Machinability of C45 steel with deep cryogenic treated tungsten carbide cutting tool inserts
2008
A time–frequency acoustic emission-based monitoring technique to identify workpiece surface malfunctions in milling with multiple teeth cutting simultaneously
2008
Effects and mechanisms in minimal quantity lubrication machining of an aluminum alloy
2005
A review on 3D micro-additive manufacturing technologies
2012 Standout
Optimization of counter flow Ranque–Hilsch vortex tube performance using Taguchi method
2009 Standout
Design optimization of cutting parameters for turning operations based on the Taguchi method
1998 Standout
Deep neural networks: A promising tool for fault characteristic mining and intelligent diagnosis of rotating machinery with massive data
2015 Standout
Machining of Aluminum alloys: a review
2017
Convolutional Neural Network Based Fault Detection for Rotating Machinery
2016 Standout
Application of Particle Swarm Optimization for Optimizing the Process Parameters in Turning of PEEK CF30 Composites
2016
Wear performance of (nc-AlTiN)/(a-Si3N4) coating and (nc-AlCrN)/(a-Si3N4) coating in high-speed machining of titanium alloys under dry and minimum quantity lubrication (MQL) conditions
2013
Comprehensive analysis of tool wear, tool life, surface roughness, costing and carbon emissions in turning Ti–6Al–4V titanium alloy: Cryogenic versus wet machining
2020
Detecting chatter and estimating wear from the torque of end milling signals by using Index Based Reasoner (IBR)
2010
Application of sustainable techniques in metal cutting for enhanced machinability: a review
2015
Deep learning for smart manufacturing: Methods and applications
2018 Standout
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Prediction of thrust force of step drill in drilling composite material by Taguchi method and radial basis function network
2006
Multiclassification of tool wear with support vector machine by manufacturing loss consideration
2004
A comprehensive review on PEM water electrolysis
2013 Standout
Modeling of cutting forces in near dry machining under tool wear effect
2006
Self-lubricating behaviors of Al2O3/TiB2 ceramic tools in dry high-speed machining of hardened steel
2004
Dry Machining and Minimum Quantity Lubrication
2004 Standout
Environmental friendly cutting fluids and cooling techniques in machining: a review
2014 Standout
A recurrent neural network based health indicator for remaining useful life prediction of bearings
2017 Standout
Manufacturing and measurement of freeform optics
2013 Standout
Chip Morphology and Forces in End Milling of Elastomers
2004
Performance-based health monitoring, diagnostics and prognostics for condition-based maintenance of gas turbines: A review
2017 Standout
A comprehensive review of big data analytics throughout product lifecycle to support sustainable smart manufacturing: A framework, challenges and future research directions
2018 Standout
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
MODELING AND OPTIMIZATION OF MACHINING PERFORMANCE MEASURES IN FACE MILLING OF AUTOMOTIVE ALUMINUM ALLOY A380 UNDER DIFFERENT LUBRICATION/COOLING CONDITIONS FOR SUSTAINABLE MANUFACTURING
2005
Data mining in manufacturing: a review based on the kind of knowledge
2008
An overview of the machinability of aeroengine alloys
2003 Standout
Chatter Stability of Metal Cutting and Grinding
2004
An investigation of modeling of the machining database in turning operations
2000
Design and development of a CNC machining process knowledge base using cloud technology
2016
Influence of Ranque-Hilsch vortex tube and nitrogen gas assisted MQL in precision turning of Al 6061-T6
2018
Experimental investigations of vegetable based cutting fluids with extreme pressure during turning of AISI 304L
2011
An evaluation approach of machine tool characteristics with adaptive prediction
1996
Particle swarm optimization algorithm: an overview
2017 Standout
Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids
2012 Standout
Dry and minimum quantity lubrication drilling of cast magnesium alloy (AM60)
2010
An experimental investigation of effects of cooling/lubrication conditions on tool wear in high-speed end milling of Ti-6Al-4V
2006
A study of the effect of palm oil as MQL lubricant on high speed drilling of titanium alloys
2010
Research on micro-electric resistance slip welding of copper electrode during the fabrication of 3D metal micro-mold
2013
Tool life and surface integrity aspects when drilling and hole making in Inconel 718
2007
Advanced monitoring of machining operations
2010 Standout
Intelligent monitoring and identification of cutting states of chips and chatter on CNC turning machine
2008
Effect of cooling methods on dimensional accuracy and surface finish of a turned titanium part
2013
The effect of application of cutting fluid with solid lubricant in suspension during cutting of Ti-6Al-4V alloy
2015
Transitions in wear mechanisms of alumina cutting tools
1996
Steels for bearings
2011 Standout
Machine Learning in Predictive Maintenance towards Sustainable Smart Manufacturing in Industry 4.0
2020 Standout
Effect of MQL on Surface Roughness in Milling of AA7075-T6
2010
Predicting surface roughness in machining: a review
2003 Standout
High speed MQL finish-turning of Inconel 718 with different coated tools
2007
Cyber-physical systems in manufacturing
2016 Standout
Micro and Nano Machining by Electro-Physical and Chemical Processes
2006
Chatter in machining processes: A review
2011 Standout
Cooling techniques to improve the machinability and sustainability of light-weight alloys: A state-of-the-art review
2020 Standout
Tribological Action and Cutting Performance of MQL Media in Machining of Aluminum
2007
Support vector machine in machine condition monitoring and fault diagnosis
2007 Standout
Micro-manufacturing: research, technology outcomes and development issues
2009
Machinery health prognostics: A systematic review from data acquisition to RUL prediction
2017 Standout
Towards energy and resource efficient manufacturing: A processes and systems approach
2012 Standout
A data mining approach for fault diagnosis: An application of anomaly detection algorithm
2014
Evaluation of near-dry machining effects on gear milling process efficiency
2009
Applications of WASPAS Method in Manufacturing Decision Making
2014 Standout
Tool life when high speed ball nose end milling Inconel 718™
2001
Sustainable manufacturing: Modeling and optimization challenges at the product, process and system levels
2010 Standout
Automated Sensor Selection and Fusion for Monitoring and Diagnostics of Plunge Grinding
2008
A review on current research trends in electrical discharge machining (EDM)
2006 Standout
Tool wear, chip formation and workpiece surface issues in CBN hard turning: A review
2010
Cutting forces and wear in dry machining of Inconel 718 with coated carbide tools
2006
A review of developments towards dry and high speed machining of Inconel 718 alloy
2003
A comparative study on the surface integrity of plastic mold steel due to electric discharge machining
2005
Eco-Friendly Cutting Fluids in Minimum Quantity Lubrication Assisted Machining: A Review on the Perception of Sustainable Manufacturing
2019
Machining of β-titanium-alloy Ti–10V–2Fe–3Al under cryogenic conditions: Cooling with carbon dioxide snow
2011
Health assessment and life prediction of cutting tools based on support vector regression
2013
A coupling method of response surfaces (CRSM) for cutting parameters optimization in machining titanium alloy under minimum quantity lubrication (MQL) condition
2013
Investigating the Minimum Quantity Lubrication in grinding of Al2O3 engineering ceramic
2013
Laser beam machining—A review
2007 Standout
Deep learning and its applications to machine health monitoring
2018 Standout
A review of mechanical drilling for composite laminates
2011 Standout
Modeling of a Single Resistance Capacitance Pulse Discharge in Micro-Electro Discharge Machining
2005
Optimisation of tool life and productivity when end milling Inconel 718TM
2007
Effect of cutting parameters on machinability characteristics in milling of magnesium alloy with carbide tool
2016
Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning
2006
Effects of duplex jets high-pressure coolant on machining temperature and machinability of Ti-6Al-4V superalloy
2017
Design and Test of a Multitooth Tool for CFRP Milling
2009
Applications of machine learning to machine fault diagnosis: A review and roadmap
2020 Standout
Microstructures and properties of high-entropy alloys
2013 Standout
Machinability performance of nickel alloy X-750 with SiAlON ceramic cutting tool under dry, MQL and hBN mixed nanofluid-MQL
2020
Cryogenic Treatment of Tool Materials: A Review
2010
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
Advance in detection system to improve the stability and capability of CNC turning process
2009
Selection of optimal MQL and cutting conditions for enhancing machinability in turning of brass
2007
A Survey of Fault Diagnosis and Fault-Tolerant Techniques—Part I: Fault Diagnosis With Model-Based and Signal-Based Approaches
2015 Standout
The effects of various cooling strategies on surface roughness and tool wear during soft materials milling
2008
Machining of 6061 aluminium alloy with MQL, dry and flooded lubricant conditions
2007
Investigation of electro-discharge micro-machining of titanium super alloy
2008
Chatter detection in milling based on the probability distribution of cutting force signal
1992
Design, additive manufacturing, processing, and characterization of metal mirror made of aluminum silicon alloy for space applications
2019
Micro-liter lubrication machining of Inconel 718
2008
Wavelets for fault diagnosis of rotary machines: A review with applications
2013 Standout
A review identifying the effectiveness of minimum quantity lubrication (MQL) during conventional machining
2017
Tool Condition Monitoring (TCM) — The Status of Research and Industrial Application
1995 Standout
Drilling of Multi-Layer Composite Materials consisting of Carbon Fiber Reinforced Plastics (CFRP), Titanium and Aluminum Alloys
2002
Refrigerated cooling air cutting of difficult-to-cut materials
2006
Machinability of Titanium Alloys.
2003
The metallurgy and processing science of metal additive manufacturing
2016 Standout
Investigation into minimal-cutting-fluid application in high-speed milling of hardened steel using carbide mills
2008
TOOL PERFORMANCE AND CHIP CONTROL WHEN MACHINING Ti6A14V AND INCONEL 901 USING HIGH PRESSURE COOLANT SUPPLY
1998
Experimental characterization on eco-friendly micro-grinding process of titanium alloy using air flow assisted electrospray lubrication with nanofluid
2018
Performance of water-based TiO2 nanofluid during the minimum quantity lubrication machining of aluminium alloy, AA6061-T6
2016
Wavelet analysis of sensor signals for tool condition monitoring: A review and some new results
2009
Progress for sustainability in the mist assisted cooling techniques: a critical review
2020
Investigation of the Machining of Titanium Components for Lightweight Vehicles
2010
Surface integrity in material removal processes: Recent advances
2011 Standout
Modeling of Cutting Temperature in Near Dry Machining
2005
A comprehensive review on minimum quantity lubrication (MQL) in machining processes using nano-cutting fluids
2019
Effects of tool edge radius on ductile machining of silicon: an investigation by FEM
2009
MACHINABILITY OF NICKEL-BASED HIGH TEMPERATURE ALLOYS
2000
Works of M. Rahman being referenced
On-line cutting state recognition in turning Using a neural network
1995
The Application of Nonstandard Support Vector Machine in Tool Condition Monitoring System
2005
Performance evaluation of cryogenically treated tungsten carbide cutting tool inserts
2003
Identification of Effective Zones for High Pressure Coolant in Milling
2000
Tool wear characteristics of binderless CBN tools used in high-speed milling of titanium alloys
2004
Performance evaluation of cryogenically treated tungsten carbide tools in turning
2006
Micro milling of pure copper
2001
Performance of cryogenically treated tungsten carbide tools in milling operations
2006
Experimental evaluation on the effect of minimal quantities of lubricant in milling
2002
MACHINABILITY STUDY OF CARBON/PEEK COMPOSITES
1999
High-speed milling of titanium alloys using binderless CBN tools
2004
Effect of grain size on wear behaviour of alumina cutting tools
1997
Investigations of tool edge radius effect in micromachining: A FEM simulation approach
2007
Effect of Chilled Air on Machining Performance in End Milling
2003
Improved performance evaluation of tool condition identification by manufacturing loss consideration
2005
Investigation of chip formation in high speed end milling
2001
Fabrication of complex shape electrodes by localized electrochemical deposition
2008
Performance evaluation of pure CBN tools for machining of steel
2003
A three-dimensional model of chip flow, chip curl and chip breaking under the concept of equivalent parameters
1995
Experimental study of micro- and nano-scale cutting of aluminum 7075-T6
2005
Tool-based micro-machining
2007
A study on the machining of high-aspect ratio micro-structures using micro-EDM
2003
Modeling and performance evaluation of Al2O3, MoS2 and graphite nanoparticle-assisted MQL in turning titanium alloy: an intelligent approach
2020
Effective training data selection in tool condition monitoring system
2005
The Effect of the Cutting Edge Radius on a Machined Surface in the Nanoscale Ductile Mode Cutting of Silicon Wafer
2007
Influence of Al2O3 and palm oil–mixed nano-fluid on machining performances of Inconel-690: IF-THEN rules–based FIS model in eco-benign milling
2019
A new tool life criterion for tool condition monitoring using a neural network
1995
Effect of High-Pressure Coolant on Machining Performance
2002
Ultra-precision turning of electroless-nickel: Effect of phosphorus contents, depth-of-cut and rake angle
2008
The machinability of inconel 718
1997
Identification of feature set for effective tool condition monitoring by acoustic emission sensing
2004
A study of the performance of cutting polycrystalline Al 6061 T6 with single crystalline diamond micro-tools
2012
Machinability study of carbon fiber reinforced composite
1999
Modeling and simulation of cutting forces generated during vertical micro-grinding
2014
EFFECTS OF COOLANT SUPPLY METHODS AND CUTTING CONDITIONS ON TOOL LIFE IN END MILLING TITANIUM ALLOY
2006
Machinability investigations of hardened steel with biodegradable oil-based MQL spray system
2020
In-Process Detection of Chatter Threshold
1988
A study of the effect of tool cutting edge radius on ductile cutting of silicon wafers
2006
Determination of optimal cutting conditions using design of experiments and optimization techniques
1993
Evaluation of Minimal of Lubricant in End Milling
2001
Cutting performance of diamond tools during ultra-precision turning of electroless-nickel plated die materials
2003
Evaluation of a Lathe with Ferrocement Bed
1993
Investigation of micro-EDM material removal characteristics using single RC-pulse discharges
2003
Using neural network for tool condition monitoring based on wavelet decomposition
1996
Knowledge-based systems in the machining domain
1991