Citation Impact
Citing Papers
Modeling of heat transfer, fluid flow and solidification microstructure of nickel-base superalloy fabricated by laser powder bed fusion
2016
Strategies for improving the sustainability of structural metals
2019 StandoutNature
Advanced structural ceramics in aerospace propulsion
2016 Standout
Size matters: why nanomaterials are different
2006 Standout
3D printing of high-strength aluminium alloys
2017 StandoutNature
Directional solidification of large superalloy castings with radiation and liquid-metal cooling: A comparative assessment
2004
Kinetic oscillations in catalytic CO oxidation on a cylindrical Pt single crystal surface
1992 StandoutNobel
Mobility of 〈111〉 tilt grain boundaries in the vicinity of the special misorientation ∑=7 in bicrystals of pure aluminium
1995
The influence of grain boundary inclination on the structure and energy of σ = 3 grain boundaries in copper
1992
New NiAl-strengthened ferritic steels with balanced creep resistance and ductility designed by coupling thermodynamic calculations with focused experiments
2012
Stability of Multiply-Twinned Particles
1969
Simulation of thin film grain structures—II. Abnormal grain growth
1992
Dendrite growth simulation during solidification in the LENS process
2009
Microstructure of the Nickel-Base Superalloy CMSX-4 Fabricated by Selective Electron Beam Melting
2016
Interaction of hydrogen with Pt(111): The role of atomic steps
1976 StandoutNobel
Effect of Fluid Convection on Dendrite Arm Spacing in Laser Deposition
2014
Physical and mechanical metallurgy of Ni3Al and its alloys
1989
Calculation of the internal stresses and strains in the microstructure of a single crystal nickel-base superalloy during creep
1993
Graphene and Graphene Oxide: Synthesis, Properties, and Applications
2010 Standout
Kinetics and Mechanisms of High‐Temperature Creep in Silicon Carbide: III, Sintered α‐Silicon Carbide
1988 StandoutNobel
The stability and structure of high miller index platinum crystal surfaces in vacuum and in the presence of adsorbed carbon and oxygen
1977
Surface Structure of Clean Au (100) and Ag (100) Surfaces
1967
Atomically Precise Colloidal Metal Nanoclusters and Nanoparticles: Fundamentals and Opportunities
2016 Standout
Probabilistic modelling of microstructure formation in solidification processes
1993
Surface self-diffusion studied by microscopic measurements of crystallite profile evolutions
1981
Structural stability and lattice defects in copper:Ab initio, tight-binding, and embedded-atom calculations
2001 Standout
Interdiffusion in the face-centred cubic phase of the Ni–Re, Ni–Ta and Ni–W systems between 900 and 1300°C
2000
WANTON AND SENSELESS?
1999
Resonance Raman scattering and optical absorption studies of CdSe microclusters at high pressure
1988 StandoutNobel
Metal Catalysts for Heterogeneous Catalysis: From Single Atoms to Nanoclusters and Nanoparticles
2018 Standout
Surface energies of solid metals
1975
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
On the primary creep of CMSX-4 superalloy single crystals
2000
Polynuclear metal carbonyl compounds and chemisorption of co on transition metal surfaces
1976 StandoutNobel
Adsorption of hydrogen on palladium single crystal surfaces
1974 StandoutNobel
Repair and manufacturing of single crystal Ni-based superalloys components by laser powder deposition—A review
2014
Modification of spatiotemporal pattern formation in an excitable medium by continuous variation of its intrinsic parameters: CO oxidation on Pt(110)
1994 StandoutNobel
Influence of precipitate morphology on intermediate temperature creep properties of a nickel-base superalloy single crystal
1989
Adolescence terminable and interminable: When does adolescence end?
1994
Kinetic oscillations and facetting during the catalytic CO oxidation on Pt(110)
1988 StandoutNobel
Microfacetting of a Pt(110) surface during catalytic CO oxidation
1988 StandoutNobel
Emerging adulthood: A theory of development from the late teens through the twenties.
2000 Standout
Deformation twinning
1995 Standout
Effect of weld cooling rate on Laves phase formation in Inconel 718 fusion zone
2013
Solute effects on the evaporation of ice particles
1994 StandoutNobel
Imaging Pattern Formation in Surface Reactions from Ultrahigh Vacuum up to Atmospheric Pressures
1995 StandoutScienceNobel
Influence of the Local Surface Structure on the5 p
1979 StandoutNobel
Scanning tunneling microscopy of Cu, Ag, Au and Al adatoms, small clusters, and islands on graphite
1989 StandoutNobel
Ethnicity, Insurgency, and Civil War
2003 Standout
On the structure of grain boundaries in metals
1982
Resistance changes in discontinuous gold films
1974
Impact of hot isostatic pressing on microstructures of CMSX-4 Ni-base superalloy fabricated by selective electron beam melting
2016
Nanocrystalline materials
1989 Standout
Angle-resolved photoemission studies of the valence-band structure of stepped crystal surfaces: Cu(S)-[3(111)×(100)]
1985 StandoutNobel
Synthesis of Tetrahexahedral Platinum Nanocrystals with High-Index Facets and High Electro-Oxidation Activity
2007 StandoutScience
Stabilization of thermosolutal convective instabilities in Ni-based single-crystal superalloys: Carbon additions and freckle formation
2001
Scanning-tunneling-microscopy studies of (2×3)N-induced structures, thermal desorption, and oxygen coadsorption on the Cu{110} surface
1994 StandoutNobel
Structure of NiCrAlY coatings deposited on single-crystal alloy turbine blade material by laser cladding
2009
Kinetic oscillations in the catalytic CO oxidation on Pt(100): Theory
1985 StandoutNobel
Infrared spectroscopy of chemisorbed carbon monoxide on copper
1975
Threshold stresses for dislocation climb over hard particles: The effect of an attractive interaction
1986
Origin of stray grain formation in single-crystal superalloy weld pools from heat transfer and fluid flow modeling
2009
Low energy electron diffraction studies of high index crystal surfaces of platinum
1972
Mechanical properties of alloys consisting of two ductile phases
2006
Ultrafine metal particles
1976 Standout
Faceting of Cu(210) and Ni(210) by activated nitrogen
1980
Microstructural Architecture, Microstructures, and Mechanical Properties for a Nickel-Base Superalloy Fabricated by Electron Beam Melting
2011
Friction stir welding and processing
2005 Standout
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
2018 StandoutScience
Embedded-atom-method functions for the fcc metals Cu, Ag, Au, Ni, Pd, Pt, and their alloys
1986 Standout
Perspectives on Titanium Science and Technology
2013 Standout
The breakdown of single-crystal solidification in high refractory nickel-base alloys
1996
Adsorption of CO on Pd single crystal surfaces
1974 StandoutNobel
Scanning tunneling microscopy of the local atomic structure of two-dimensional gold and silver islands on graphite
1988 StandoutNobel
Nickel-Based Superalloys for Advanced Turbine Engines: Chemistry, Microstructure and Properties
2006 Standout
Reactions at well-defined surfaces
1994 StandoutNobel
Spatio-temporal pattern formation on polycrystalline platinum surfaces during catalytic CO oxidation
1993 StandoutNobel
Stray Grain Formation in Welds of Single-Crystal Ni-Base Superalloy CMSX-4
2009
Surface stress and size effect on the lattice parameter in small particles of gold and platinum
1985
Ostwald ripening in a Pt/SiO2 model catalyst studied by in situ TEM
2011
Room and elevated temperature sliding wear behavior and mechanisms of additively manufactured novel precipitation strengthened metallic composites
2019
Morphology and etching processes on macroscopic metal catalysts
1979
Microstructures and properties of high-entropy alloys
2013 Standout
The Origin of Microstructural Diversity, Texture, and Mechanical Properties in Electron Beam Melted Ti-6Al-4V
2010
Surface premelting
1984
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
Modeling of micro- and macrosegregation and freckle formation in single-crystal nickel-base superalloy directional solidification
1997
A Microstructure Evolution Model for the Processing of Single-Crystal Alloy CMSX-4 Through Scanning Laser Epitaxy for Turbine Engine Hot-Section Component Repair (Part II)
2014
Pd-Pt Bimetallic Nanodendrites with High Activity for Oxygen Reduction
2009 StandoutScience
A microscopic model for catalyst surfaces—II
1982
Structure-dependence of intergranular corrosion in high purity nickel
1990
Mechanism of the CO-induced1×2→1×1structural transformation of Pt(110)
1989 StandoutNobel
The interaction between slip and twinning systems and the influence of twinning on the mechanical behavior of fcc metals and alloys
1981
Particulate reinforced metal matrix composites — a review
1991 Standout
Morphology Transition from Dendrites to Equiaxed Grains for AlCoCrFeNi High-Entropy Alloys by Copper Mold Casting and Bridgman Solidification
2011
Development of a freckle predictor via rayleigh number method for single-crystal nickel-base superalloy castings
2000
The physics and mechanics of fibre-reinforced brittle matrix composites
1994
Large-Area Synthesis of High-Quality and Uniform Graphene Films on Copper Foils
2009 StandoutScience
Direct observation of mobility and interactions of oxygen molecules chemisorbed on the Ag(110) surface
1997 StandoutNobel
Current issues in recrystallization: a review
1997 Standout
A coupled Cellular Automaton–Lattice Boltzmann model for grain structure simulation during additive manufacturing
2016
Effects of Boundaries on Pattern Formation: Catalytic Oxidation of CO on Platinum
1994 StandoutScienceNobel
Estimating surface diffusion coefficients
1995
Crystallographic texture engineering through novel melt strategies via electron beam melting: Inconel 718
2014
Directional anisotropy of surface self-diffusion on Pt(110)
1985
The use of advanced characterization to study transitions across solid state interfaces
2010
Carbon interaction with nickel surfaces: Monolayer formation and structural stability
1979
Additive manufacturing of metals
2016 Standout
Exploring dendrite coherency with the discrete element method
2011
Works of M. McLean being referenced
The contribution of friction stress to the creep behaviour of the nickel-base in situ composite, γ—γ'-Cr3C2
1980
On the threshold stress for dislocation creep in particle strengthened alloys
1985
Directionally Solidified Materials for High Temperature Service
1984
Asymmetric creep deformation of a single crystal superalloy
1995
Variation of surface energy with crystallographic orientation in silver
1964
All the Mothers are One: Hindu India and the Cultural Reshaping of Psychoanalysis
1995
A study of grain-boundary grooving at the platinum/alumina interface
1971
Solidification morphologies in directionally solidified superalloys
1984
On the effects of heat treatments on the creep behaviour of a single crystal superalloy
1986
Tree-ring formation during vacuum arc remelting of INCONEL 718: Part I. Experimental investigation
2002
Directional and single-crystal solidification of Ni-base superalloys: Part I. The role of curved isotherms on grain selection
2000
Surface energy anisotropy by an improved thermal grooving technique
1969
Modelling of Marangoni effects in electron beam melting
1998
Anti-phase domain boundary tubes in Ni3Al
1982 Nature
Modelling of high-temperature mechanical behaviour of a single crystal superalloy
1997
Implications of dislocation micromechanisms for changes in orientation and shape of single crystal superalloys
1998
Grain structure development in directional solidification of nickel-base superalloys
2004
On the equilibrium shape of dislocation etch pits
1968
Surface self-diffusion on gold
1968
Grain-boundary energy of copper at 1030� C
1973
Mechanisms and Models of High Temperature Deformation of Composites
1988
Tension–compression creep asymmetry in a turbine disc superalloy: roles of internal stress and thermal ageing
2004
The temperature dependence of the surface energy anisotropy of platinum
1966
On the Burgers vectors of grain boundary dislocations
1974
Creep deformation of single crystal superalloys—modelling the crystallographic anisotropy
1990
Effect of process parameters on grain structure formation during VAR of INCONEL alloy 718
2004
Particle-coarsening, σ0 and tertiary creep
1983
The Colors of Violence: Cultural Identities, Religion, and Conflict
1998
Creep deformation of metal—matrix composites
1985
Modeling the Effects of Damage and Microstructural Evolution on the Creep Behavior of Engineering Alloys
2000
Measurement of the density and surface tension of Ni-based superalloys in the liquid and mushy states
2005
Burgers vectors of boundary dislocations in ordered grain boundaries of cubic metals
1973
Creep behaviour of a Ni-Ni3Al-Cr3C2 eutectic composite
1977
Surface energy and the secondary recrystallisation of platinum sheet
1965
A model of solidification microstructures in nickel-based superalloys: predicting primary dendrite spacing selection
2003
Effects of trace elements on mechanical properties of superalloys
1984
Microstructural contributions to friction stress and recovery kinetics during creep of the nickel-base superalloy IN738LC
1983
Determination of the surface energy of copper as a function of crystallographic orientation and temperature
1971
Microstructural changes during the high temperature creep of a directionally-solidified nickel-base superalloy
1985