Citation Impact
Citing Papers
Design for additive manufacturing with site-specific properties in metals and alloys
2016
Influence of damage on the tensile behaviour of pure aluminium reinforced with ≥40 vol. pct alumina particles
2001
Additive manufacturing: technology, applications and research needs
2013 Standout
Strategies for improving the sustainability of structural metals
2019 StandoutNature
An ultra-lightweight design for imperceptible plastic electronics
2013 StandoutNature
Bioinspired structural materials
2014 Standout
Laser additive manufacturing of metallic components: materials, processes and mechanisms
2012 Standout
Nanofillers in polymeric matrix: a study on silica reinforced PA6
2001
Effect of load redistribution in transient plastic flow
2006
Transformation‐Toughened Ceramic Multilayers with Compositional Gradients
1998
Extended finite element method for cohesive crack growth
2002 Standout
Perspective on hetero-deformation induced (HDI) hardening and back stress
2019 Standout
Modeling and designing functionally graded material components for fabrication with local composition control
1999
Micromechanical modeling of processing-induced damage in Al–SiC metal matrix composites synthesized using the disintegrated melt deposition technique
1999
Micromechanical models for graded composite materials
1997
The production and application of metal matrix composite materials
2000 Standout
Processing techniques for functionally graded materials
2003 Standout
Polymer/Silica Nanocomposites: Preparation, Characterization, Properties, and Applications
2008 Standout
Metal matrix composites – From science to technological significance
2005 Standout
Ceramic materials for thermal barrier coatings
2003 Standout
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Functionally graded metals and metal-ceramic composites: Part 2 Thermomechanical behaviour
1997
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
2009 Standout
New Insights into Perfluorinated Sulfonic-Acid Ionomers
2017 Standout
Biological materials: Structure and mechanical properties
2007 Standout
Mechanics of rollable and foldable film-on-foil electronics
1999
Analysis of functionally graded plates
2000 Standout
Bending and free vibration response of layered functionally graded beams: A theoretical model and its experimental validation
2007
R-curve and strength behavior of a functionally graded material
1998
Cylindrical Al2O3/TZP functionally graded materials by EPD
2000
Computational modelling of impact damage in brittle materials
1996 Standout
Laser processing of materials
2003 Standout
Graded Materials for Resistance to Contact Deformation and Damage
2001 Science
Damage and ductility of particulate and short-fibre Al Al 2 O 3 composites
1996
Mechanical properties and thermal shock behaviour of an alumina/zirconia functionally graded material prepared by electrophoretic deposition
2006
Effect of reinforcement connectivity on the elasto-plastic behavior of aluminum composites containing sub-micron alumina particles
2003
Determination of the size of the representative volume element for random composites: statistical and numerical approach
2003 Standout
Effect of SiC volume fraction and particle size on the fatigue resistance of a 2080 Al/SiC p composite
1998
Functionally graded metals and metal-ceramic composites: Part 1 Processing
1995
Incorporation of microstructural information into models of two-phase materials
1995
Evaluating microstructural and damage effects in rule-of-mixtures predictions of the mechanical properties of Ni-Al2O3 composites
1999
Experimental Measurement of Stress and Strain in Nafion Membrane during Hydration Cycles
2011
Stress and wafer bending of a-plane GaN layers on r-plane sapphire substrates
2006 StandoutNobel
Simultaneous improvement of strength and plasticity: Additional work-hardening from gradient microstructure
2017
An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models
2006 Standout
Simulation and investigation of pore size graded titania layers during sintering
2000
Fundamentals of Residual Stresses in Joints Between Dissimilar Materials
1995
Analysis of laser metal-cut energy process window
2000
Electrophoretic deposition: From traditional ceramics to nanotechnology
2008 Standout
Nonlinear transient thermoelastic analysis of functionally graded ceramic-metal plates
1998 Standout
Extensions of the Stoney formula for substrate curvature to configurations with thin substrates or large deformations
1999
Stress–strain behavior in initial yield stage of short fiber reinforced metal matrix composite
2002
Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: A model for predicting their yield strength
2006 Standout
Enhanced plasticity in a bulk amorphous matrix composite: macroscopic and microscopic viewpoint studies
2004
Soft Robotic Grippers
2018 Standout
Some basic fracture mechanics concepts in functionally graded materials
1996
Indentation of solids with gradients in elastic properties: Part I. Point force
1997
Three-dimensional exact solution for the vibration of functionally graded rectangular plates
2003 Standout
Residual Stress Measurement in a Ceramic-Metallic Graded Material
2002
Mechanical Properties and Microstructure of Diamond–SiC Nanocomposites
2002 StandoutNobel
Experimental trends in polymer nanocomposites—a review
2004 Standout
Review of current trends in research and applications of sandwich structures
2018 Standout
Fabrication and creep properties of superalloy-zirconia composites
2003
Mechanical behavior of amorphous alloys
2007 Standout
Optimization of natural frequencies of bidirectional functionally graded beams
2006
Thermal-barrier coatings for more efficient gas-turbine engines
2012 Standout
Modeling and measurement of residual stresses in a bulk metallic glass plate
2003 Standout
Numerical simulations of fast crack growth in brittle solids
1994 Standout
Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites
2008 Standout
Thermal Spray: Current Status and Future Trends
2000
Dielectric Elastomer Based “Grippers” for Soft Robotics
2015
Mechanical properties of kenaf fibre reinforced polymer composite: A review
2014 Standout
X-ray Residual Stress Measurement in Metallic and Ceramic Plasma Sprayed Coatings
1998
Structural engineering of polyurethane coatings for high performance applications
2007 Standout
2002 StandoutNobel
Self-consistent elastoplastic stress solutions for functionally graded material systems subjected to thermal transients
2002
A new method for estimating residual stresses by instrumented sharp indentation
1998 Standout
Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys
2020 Standout
Free vibration characteristics of a functionally graded beam by finite element method
2010 Standout
Works of M. Finot being referenced
Effective elastic response of two-phase composites
1994
Effective plastic response of two-phase composites
1995
Large deformation and geometric instability of substrates with thin-film deposits
1997
Curvature changes during thermal cycling of a compositionally graded NiAl2O3 multi-layered material
1996
Micromechanical modeling of reinforcement fracture in particle-reinforced metal-matrix composites
1994
Small and large deformation of thick and thin-film multi-layers: Effects of layer geometry, plasticity and compositional gradients
1996
Elastoplastic analysis of thermal cycling: layered materials with compositional gradients
1995
Determination of processing-induced stresses and properties of layered and graded coatings: Experimental method and results for plasma-sprayed NiAl2O3
1997