Citation Impact
Citing Papers
A review of fuel cell systems for maritime applications
2016 Standout
Fundamentals and advances in magnesium alloy corrosion
2017 Standout
Nanotechnology for environmentally sustainable electromobility
2016 StandoutNobel
Highly active oxide photocathode for photoelectrochemical water reduction
2011 Standout
Designing the next generation of proton-exchange membrane fuel cells
2021 StandoutNature
Nanomaterials for Rechargeable Lithium Batteries
2008 Standout
Metal–air batteries: from oxygen reduction electrochemistry to cathode catalysts
2012 Standout
Platinum single-atom and cluster catalysis of the hydrogen evolution reaction
2016 Standout
Processing of Bulk Metallic Glass
2009 Standout
Energy and fuels from electrochemical interfaces
2016 Standout
Nonpolar III-nitride vertical-cavity surface emitting lasers with a polarization ratio of 100% fabricated using photoelectrochemical etching
2014 StandoutNobel
Recent developments in stainless steels
2009 Standout
The Effects of Water Vapor and Hydrogen on the High-Temperature Oxidation of Alloys
2013
Effect of thermal cycling on protective properties of alumina scale grown on thin Haynes 214 foil
2015
Thermal conductivity of carbon nanotubes and their polymer nanocomposites: A review
2010 Standout
Geopolymer concrete: A review of some recent developments
2015 Standout
Corrosion resistance of TiO2 films grown on stainless steel by atomic layer deposition
2007
A review of Ga2O3 materials, processing, and devices
2018 Standout
Proton exchange membrane fuel cell from low temperature to high temperature: Material challenges
2007
A comprehensive review on PEM water electrolysis
2013 Standout
The emergence and prospects of deep-ultraviolet light-emitting diode technologies
2019 StandoutNobel
Template-directed proton conduction pathways in a coordination framework
2014 StandoutNobel
Production of metallic glassy bipolar plates for PEM fuel cells by hot pressing in the supercooled liquid state
2008
Direct heteroepitaxial growth of thick AlN layers on sapphire substrates by hydride vapor phase epitaxy
2006 StandoutNobel
Wet etching of GaN, AlN, and SiC: a review
2005
A review of power battery thermal energy management
2011 Standout
Advanced Thermoelectric Design: From Materials and Structures to Devices
2020 Standout
Corrosion of metal bipolar plates for PEM fuel cells: A review
2010
Perfluoroalkyl-Functionalized Covalent Organic Frameworks with Superhydrophobicity for Anhydrous Proton Conduction
2020 StandoutNobel
Host–Guest Assembly of H-Bonding Networks in Covalent Organic Frameworks for Ultrafast and Anhydrous Proton Transfer
2021 StandoutNobel
Hot corrosion behaviour and its mechanism of a new alumina-forming austenitic stainless steel in molten sodium sulphate
2013
Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging
2011 Standout
Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition
2014 Standout
A review of polymer electrolyte membrane fuel cells: Technology, applications, and needs on fundamental research
2010 Standout
Electroactive phases of poly(vinylidene fluoride): Determination, processing and applications
2013 Standout
A high-throughput strategy to screen interfacial diffusion barrier materials for thermoelectric modules
2019
Thermodynamically controlled coordination-engineering of novel 2D cadmium thiolate coordination polymers
2011 StandoutNobel
Metal-Free Catalysts for Oxygen Reduction Reaction
2015 Standout
Acid-resistant cements for geothermal wells: sodium silicate activated slag/fly ash blends
2005
Polymer Electrolyte Membrane Fuel Cell (PEMFC) Flow Field Plate: Design, Materials and Characterisation
2010
Development and exploration of refractory high entropy alloys—A review
2018 Standout
Preparation of a Freestanding AlN Substrate by Hydride Vapor Phase Epitaxy at 1230 °C Using (111)Si as a Starting Substrate
2007
Study on the Seeded Growth of AlN Bulk Crystals by Sublimation
2004 StandoutNobel
Metal bipolar plates for PEM fuel cell—A review
2006
Recent advances in graphene based polymer composites
2010 Standout
Recent Trends and Perspectives in Electrochemical Water Splitting with an Emphasis on Sulfide, Selenide, and Phosphide Catalysts of Fe, Co, and Ni: A Review
2016 Standout
A review of PEM fuel cell durability: Degradation mechanisms and mitigation strategies
2008
Effect of microalloying with silicon on high temperature oxidation resistance of novel refractory high-entropy alloy Ta-Mo-Cr-Ti-Al
2017
Encapsulating Mobile Proton Carriers into Structural Defects in Coordination Polymer Crystals: High Anhydrous Proton Conduction and Fuel Cell Application
2016 StandoutNobel
Proton exchange membrane fuel cells
2006
Review on concentrating solar power plants and new developments in high temperature thermal energy storage technologies
2015 Standout
A state-of the-art survey of TOPSIS applications
2012 Standout
Maximizing the right stuff: The trade-off between membrane permeability and selectivity
2017 StandoutScience
Preparation and properties of carbon nanotube/polypropylene nanocomposite bipolar plates for polymer electrolyte membrane fuel cells
2008
Hydrogen energy, economy and storage: Review and recommendation
2019 Standout
Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of fly ash
2013 Standout
Photoelectrochemical etching of p-type GaN heterostructures
2009 StandoutNobel
Oxyfuel combustion for CO2 capture in power plants
2015 Standout
Role of slag in microstructural development and hardening of fly ash-slag geopolymer
2012
TOPSIS multiple-criteria decision support analysis for material selection of metallic bipolar plates for polymer electrolyte fuel cell
2006
Bulk AlN crystal growth: self-seeding and seeding on 6H-SiC substrates
2002
Works of L.R. Walker being referenced
Growth of Cr-Nitrides on commercial Ni–Cr and Fe–Cr base alloys to protect PEMFC bipolar plates
2006
Initial Nucleation Study and New Technique for Sublimation Growth of AlN on SiC Substrate
2001
Preferential thermal nitridation to form pin-hole free Cr-nitrides to protect proton exchange membrane fuel cell metallic bipolar plates
2004
Increasing the Upper Temperature Oxidation Limit of Alumina Forming Austenitic Stainless Steels in Air with Water Vapor
2011
Corrosion behavior of CrN, Cr2N and π phase surfaces on nitrided Ni–50Cr for proton exchange membrane fuel cell bipolar plates
2005
On the Loss of Protective Scale Formation in Creep-Resistant, Alumina-Forming Austenitic Stainless Steels at 900°C in Air
2008
High-temperature diffusion barriers for protective coatings
2004
Wet Chemical Etching of AlN Single Crystals
2002
Protective nitride formation on stainless steel alloys for proton exchange membrane fuel cell bipolar plates
2007
Assessment of Thermal Nitridation to Protect Metal Bipolar Plates in Polymer Electrolyte Membrane Fuel Cells
2002
Composition, Microstructure, and Water Vapor Effects on Internal/External Oxidation of Alumina-Forming Austenitic Stainless Steels
2009
Characterization of a carburized surface layer on an austenitic stainless steel
2005
Characterization of the breakaway al content in alumina-forming alloys
2004
Oxidation resistance and mechanical properties of Laves phase reinforced Cr in-situ composites
2000
Microanalysis of alkali-activated fly ash–CH pastes
2002