Citation Impact
Citing Papers
Materials Challenges for Advanced Nuclear Energy Systems
2009
Fissile core and Tritium-Breeding Blanket: structural materials and their requirements
2008
Radiation-induced amorphization of ordered intermetallic compounds CuTi,CuTi 2 Cu 4 Ti 3
1991
Engineering Carbon Materials from the Hydrothermal Carbonization Process of Biomass
2010 Standout
Strategies for improving the sustainability of structural metals
2019 StandoutNature
A metal-free bifunctional electrocatalyst for oxygen reduction and oxygen evolution reactions
2015 Standout
Additively manufactured hierarchical stainless steels with high strength and ductility
2017 Standout
Effect of Sterilization Method and Other Modifications on the Wear Resistance of Acetabular Cups Made of Ultra-High Molecular Weight Polyethylene
2000
On the mechanisms of biocompatibility
2008 Standout
Swelling rate versus swelling correlation in 20% cold-worked 316 stainless steels
2003
Recent developments in stainless steels
2009 Standout
Nucleation of grain boundary cavities under the combined influence of helium and applied stress
1987
Irradiation creep models — an overview
1988
Effect of neutron irradiation on nanoclusters in MA957 ferritic alloys
2011
A critical review of high entropy alloys and related concepts
2016 Standout
Accident tolerant fuels for LWRs: A perspective
2013 Standout
Irradiation creep and interrelation with swelling in austenitic stainless steels
1981
Functionally graded Inconel 718 processed by additive manufacturing: Crystallographic texture, anisotropy of microstructure and mechanical properties
2016
Deformation mode maps for tensile deformation of neutron-irradiated structural alloys
2004
Effects of Al addition on high strain rate deformation of fully austenitic high Mn steels
2011
Radiation-induced degradation of stainless steel light water reactor internals
2012
Solute segregation and precipitate stability in irradiated alloys
1981
Formation and stability of radiation-induced phases in neutron-irradiated austenitic and ferritic steels
1989
An overview of Direct Laser Deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and control
2015
On the use of SRIM for computing radiation damage exposure
2013 Standout
Polymer/Silica Nanocomposites: Preparation, Characterization, Properties, and Applications
2008 Standout
On the modeling of the high-temperature embrittlement of metals containing helium
1983
Analysis of displacement damage and defect production under cascade damage conditions
1993
Effects of Mn and Al contents on cryogenic-temperature tensile and Charpy impact properties in four austenitic high-Mn steels
2015 Standout
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Advances in void swelling and helium bubble physics
1984
Helium accumulation in metals during irradiation – where do we stand?
2003
Microband-induced plasticity in a high Mn–Al–C light steel
2008
Review of selective laser melting: Materials and applications
2015 Standout
On the stress dependence of partial dislocation separation and deformation microstructure in austenitic stainless steels
2003
Mechanical properties of silica–(meth)acrylate hybrid coatings on polycarbonate substrate
2002
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
Fusion materials science: Overview of challenges and recent progress
2005
Polymerization via Cluster−Solid Surface Impacts: Molecular Dynamics Simulations
1997
Superplasticity—Recent advances and future directions
1989 Standout
TEM observations and finite element modelling of channel deformation in pre-irradiated austenitic stainless steels – Interactions with free surfaces and grain boundaries
2010
Chemical functionalization of carbon nanotubes through energetic radical collisions
2000
Overview of microstructural evolution in neutron-irradiated austenitic stainless steels
1993
On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting
2014
Microstructure of neutron-irradiated iron before and after tensile deformation
2006
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
A review on the current progress of metal hydrides material for solid-state hydrogen storage applications
2016 Standout
Temperature dependence of strain hardening and plastic instability behaviors in austenitic stainless steels
2004
Theory of positrons in solids and on solid surfaces
1994 Standout
Tight-binding potentials for transition metals and alloys
1993 Standout
Raman scattering from MeV-ion implanted diamond
1995
3D laser shock peening – A new method for improving fatigue properties of selective laser melted parts
2020
Helium bubble in aluminium studied by positron annihilation: determination of bubble parameters
1988
Nanocrystalline materials
1989 Standout
Deformation in metals after low-temperature irradiation: Part II – Irradiation hardening, strain hardening, and stress ratios
2008
Deformation in metals after low-temperature irradiation: Part I – Mapping macroscopic deformation modes on true stress–dose plane
2008
Thin film characterization using a mechanical properties microprobe
1987
On mechanisms controlling swelling in ferritic and martensitic alloys
1988
Enhanced fatigue properties of nanostructured austenitic SUS 316L stainless steel
2011
Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging
2011 Standout
Current state of Fe-Mn-Al-C low density steels
2017 Standout
Materials to deliver the promise of fusion power – progress and challenges
2004
Structural materials for fission & fusion energy
2009 Standout
Mechanical and electronic properties of A1−B H (A and B = Ti, Zr, Hf) hydride alloys: A first-principles study
2013
Plastic instability in polycrystalline metals after low temperature irradiation
2004
Evaluation of the Role of Deformation Twinning in Work Hardening Behavior of Face-Centered-Cubic Polycrystals
2007
Stacking fault model of ∊-martensite and itsDIFFaXimplementation
2011
Polydopamine Surface Chemistry: A Decade of Discovery
2018 Standout
Thermal conductivity degradation of ceramic materials due to low temperature, low dose neutron irradiation
2005
Direct Synthesis of Carbon-Rich Composite Sub-microtubes by Combination of a Solvothermal Route and a Succeeding Self-Assembly Process
2008
Investigations of ion radiation effects at metal/liquid interfaces
1999
Recommendations on damage exposure units for ferritic steel embrittlement correlations
1992
Additive manufacturing of fatigue resistant materials: Challenges and opportunities
2017
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
2018 StandoutScience
Dose dependence of the microstructural evolution in neutron-irradiated austenitic stainless steel
1993
Plasma-surface modification of biomaterials
2002
Microstructural development in cubic silicon carbide during irradiation at elevated temperatures
2006
Enhanced radiation tolerance of ultrafine grained Fe–Cr–Ni alloy
2011
Handbook of SiC properties for fuel performance modeling
2007 Standout
Influence of irradiation parameters on damage accumulation in metals and alloys
1994
First-principles study of helium, carbon, and nitrogen in austenite, dilute austenitic iron alloys, and nickel
2013
Corrosion of Al CoCrFeNi high-entropy alloys: Al-content and potential scan-rate dependent pitting behavior
2017 Standout
Surface Reactions of Molecular and Atomic Oxygen with Carbon Phosphide Films
2005
A second-generation reactive empirical bond order (REBO) potential energy expression for hydrocarbons
2002 Standout
High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships
2011 Standout
Fatigue behavior of a wrought Al0.5CoCrCuFeNi two-phase high-entropy alloy
2015
Assessment of the thermodynamic dimension of the stacking fault energy
2014
The influence of helium on the bulk properties of fusion reactor structural materials
1984
Twinning-induced plasticity (TWIP) steels
2017 Standout
Modeling irradiation growth of zirconium and its alloys
1998
Effect of various reduction methods of graphene oxide on electromagnetic shielding performance of reduced graphene oxide against electromagnetic pollution in X-band frequency
2017
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
Graphene family, and their hybrid structures for electromagnetic interference shielding applications: Recent trends and prospects
2021 Standout
Analytical solutions for helium bubble and critical radius parameters using a hard sphere equation of state
1985
The Stability of 9Cr-ODS Oxide Particles Under Heavy-Ion Irradiation
2005
Nouveau mécanisme de diffusion dans les solides à haute température
1987
Recent Developments in Irradiation-Resistant Steels
2008 Standout
Interpretation of Raman spectra of disordered and amorphous carbon
2000 Standout
Hydrogen interactions with defects in crystalline solids
1992 Standout
Fatigue behaviors of AISI 316L stainless steel with a gradient nanostructured surface layer
2015 Standout
An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments
1992 Standout
Materials challenges in nuclear energy
2013 Standout
Chemistry of Carbon Nanotubes
2006 Standout
Irradiation Resistance of Multicomponent Alloys
2013
Phase transitions and heterophase fluctuations
1991 Standout
Defect and void evolution in oxide dispersion strengthened ferritic steels under 3.2 MeV Fe+ ion irradiation with simultaneous helium injection
2000
The role of divacancies in void swelling
1979
Irradiation creep mechanisms: An experimental perspective
1988
On the effects of irradiation and helium on the yield stress changes and hardening and non-hardening embrittlement of ∼8Cr tempered martensitic steels: Compilation and analysis of existing data
2006
Critical questions in materials science and engineering for successful development of fusion power
2007
Chemistry and Structure of Beta Silicon Carbide Implanted with High‐Dose Aluminum
1993 StandoutNobel
Solubility, diffusivity and trapping of hydrogen in dilute alloys. Deformed and amorphous metals—II
1982
Fission-fusion correlations for swelling and microstructure in stainless steels: Effect of the helium to displacement per atom ratio
1981
Formation of shear bands and strain-induced martensite during plastic deformation of metastable austenitic stainless steels
2007 Standout
Efficient Annealing of Radiation Damage Near Grain Boundaries via Interstitial Emission
2010 StandoutScience
Additive manufacturing of metals
2016 Standout
Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys
2020 Standout
The evolution of mechanical property change in irradiated austenitic stainless steels
1993
Fatigue performance of additive manufactured metallic parts
2013
Works of L.K. Mansur being referenced
Irradiation creep by dislocation glide enabled by preferred absorption of point defects — theory and experiment
1980
Mechanical property changes induced in structural alloys by neutron irradiations with different helium to displacement ratios
1988
The capture efficiency of coated voids
1980
Origin of hardening and deformation mechanisms in irradiated 316 LN austenitic stainless steel
2001
Theoretical evaluation of a mechanism of precipitate-enhanced cavity swelling during irradiation
1981
Defect reactions and clustering in irradiated solids
1990
Correlation of neutron and heavy-ion damage
1978
Strain hardening and plastic instability properties of austenitic stainless steels after proton and neutron irradiation
2001
Temperature effects on the mechanical properties of candidate SNS target container materials after proton and neutron irradiation
2002
On the origin of deformation microstructures in austenitic stainless steel: Part II—Mechanisms
2001
Unified theoretical analysis of experimental swelling data for irradiated austenitic and ferritic/martensitic alloys
1990
Irradiation creep by climb-enabled glide of dislocations resulting from preferred absorption of point defects
1979
Effective diffusion coefficients of point defects in impure materials
1981
Raman scattering from ion-implanted diamond, graphite, and polymers
1993
Effects of frequency on fatigue behavior of type 316 low-carbon, nitrogen-added stainless steel in air and mercury for the spallation neutron source
2006
Radiation-enhanced recrystallization in copper alloys
1986
A cascade diffusion theory of sink capture fluctuations during irradiation of a solid
1985
Relationships between phase stability and void swelling in Fe-Cr-Ni alloys during irradiation
1992
The role of helium in the development of damage structure and swelling in neutron-irradiated aluminium
1986
Unified theoretical analysis of experimental swelling data for irradiated austenitic and ferritic/martensitic alloys
1990
Theory of helium transport and clustering in materials under irradiation
1983
Critical radius and critical number of gas atoms for cavities containing a van der waals gas
1984
Microstructural analysis of ion-irradiation-induced hardening in inconel 718
2003
Materials research and development for the spallation neutron source mercury target
2003
Improved surface properties of polymer materials by multiple ion beam treatment
1991
The effects of impurity trapping on irradiation-induced swelling and creep
1978
Swelling with inhomogeneous point defect production — a cascade diffusion theory
1979
Perspectives on radiation effects in nickel-base alloys for applications in advanced reactors
2009
Effects of mercury on fatigue behavior of Type 316 LN stainless steel: application in the spallation neutron source
2003
The effect of point defects on the amorphization of metallic alloys during ion implantation
1986
Homogeneous reaction rate model for hydrogen production from ion-irradiated polymers
1994
Isotopic alloying to tailor helium production rates in mixed-spectrum reactors
1986
Hardness and defect structures in EC316LN austenitic alloy irradiated under a simulated spallation neutron source environment using triple ion-beams
2000
Void Swelling in Metals and Alloys Under Irradiation: An Assessment of the Theory
1978
Mechanisms of helium interaction with radiation effects in metals and alloys: A review
1983
Precipitation and cavity formation in austenitic stainless steels during irradiation
1981
Ion beam application for improved polymer surface properties
1993
On the origin of deformation microstructures in austenitic stainless steel: part I—microstructures
2001
Low-temperature irradiation creep of fusion reactor structural materials
1991
Materials needs for fusion, Generation IV fission reactors and spallation neutron sources – similarities and differences
2004
On mechanisms by which a soft neutron spectrum may induce accelerated embrittlement
1990
Irradiation creep by cascade-induced point defect fluctuations
1981
Modification of radiation damage microstructure by helium
1983
Triple ion beam irradiation facility
1989
Fatigue properties of type 316LN stainless steel in air and mercury
2005
Distributions of point defects in bounded media under irradiation
1976
Control of helium effects in irradiated materials based on theory and experiment
1986
Hardness measurements of Ar+-beam treated polyimide by depth-sensing ultra low load indentation
1993
Helium and hydrogen induced hardening in 316LN stainless steel
2000
Effects of rapidly pulsed ion bombardment on microstructure and phase stability in a Ti-modified stainless steel
1986
The effect of phosphorus on the swelling and precipitation behavior of austenitic stainless steels during irradiation
1984
Mechanisms of swelling suppression in cold-worked phosphorous-modified Fe-Ni-Cr alloys
1990
Effects of pulsed dual-ion irradiation on phase transformations and microstructure in Ti-modified austenitic alloy
1983
Effects of helium on radiation-induced defect microstructure in austenitic stainless steel
2000
Theoretical basis for unified analysis of experimental data and design of swelling-resistant alloys
1991
The effect of precipitate-matrix interface sinks on the growth of voids in the matrix
1981
Theory of transitions in dose dependence of radiation effects in structural alloys
1993
Theory and experimental background on dimensional changes in irradiated alloys
1994
Comparisons of experimental measurements and a theoretical model for specimen self-heating during fatigue of type 316 LN stainless steel
2004
Effects of point defect trapping and solute segregation on irradiation-induced swelling and creep
1979