Standout Papers
Citation Impact
Citing Papers
AN APPROACH TO AUTOMATE DISCONTINUITY MEASUREMENTS OF ROCK FACES USING LASER SCANNING TECHNIQUES
2002
A review of monitoring, calculation, and simulation methods for ground subsidence induced by coal mining
2023
Free radical reaction characteristics of coal low-temperature oxidation and its inhibition method
2016 Standout
3D printing of high-strength aluminium alloys
2017 StandoutNature
Machine learning for data-driven discovery in solid Earth geoscience
2019 StandoutScience
A review of statistically-based landslide susceptibility models
2018 Standout
The Northwest Geysers EGS Demonstration Project, California – Part 2: Modeling and interpretation
2015
A comparison of tensile failure in 3D-printed and natural sandstone
2017
Micromechanical parameters in bonded particle method for modelling of brittle material failure
2010
Numerical analysis of THM coupling of a deeply buried roadway passing through composite strata and dense faults in a coal mine
2013
Thermophysical Models of Underground Coal Gasification and FEM Analysis
2007
Parameter estimation approach for particle flow model of rockfill materials using response surface method
2015
A bonded-particle model for rock
2004 Standout
Model test study on surrounding rock deformation and failure mechanisms of deep roadways with thick top coal
2015
Use of LIDAR in landslide investigations: a review
2010
Thermal conductivity of polymer-based composites: Fundamentals and applications
2016 Standout
Influence of geological conditions on the powder factor for tunnel blasting
2004
Underground hydrogen storage: Characteristics and prospects
2019 Standout
Rapid mapping of ultrafine fault zone topography with structure from motion
2014 Standout
Train-induced vibrations in tunnels : a review
2008
Bedrock fault scarp history: Insight from t-LiDAR backscatter behaviour and analysis of structure changes
2014
Benchmarking railway vibrations – Track, vehicle, ground and building effects
2014 Standout
Study on the Mechanical Properties and Mechanical Response of Coal Mining at 1000 m or Deeper
2018 Standout
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
Discrete Element Modeling of Masonry Structures
2007 Standout
Determination and prediction on “three zones” of coal spontaneous combustion in a gob of fully mechanized caving face
2017 Standout
Underground coal gasification: From fundamentals to applications
2012 Standout
Ensemble Prediction Algorithm of Anomaly Monitoring Based on Big Data Analysis Platform of Open‐Pit Mine Slope
2018 Standout
A METHOD FOR AUTOMATED DISCONTINUITY ANALYSIS OF ROCK SLOPES WITH 3D LASER SCANNING.
2005
Discrimination between marls and limestones using intensity data from terrestrial laser scanner
2009
A random method for simulating loose packs of angular particles using tetrahedra
2001
Ground-based and UAV-Based photogrammetry: A multi-scale, high-resolution mapping tool for structural geology and paleoseismology
2014
A fully coupled hydro-thermo-mechanical model for the spontaneous combustion of underground coal seams
2014
Influence of range measurement noise on roughness characterization of rock surfaces using terrestrial laser scanning
2011
A generic model for predicting long-term behavior of storage salt caverns after their abandonment as an aid to risk assessment
2015
The application of a modified Voronoi logic to brittle fracture modelling at the laboratory and field scale
2014
Advanced Modelling of Soil Organic Carbon Content in Coal Mining Areas Using Integrated Spectral Analysis: A Dengcao Coal Mine Case Study
2024 Standout
Method for Automated Discontinuity Analysis of Rock Slopes with Three-Dimensional Laser Scanning
2005
Stress redistribution of longwall mining stope and gas control of multi-layer coal seams
2014
Accuracy and Resolution of Kinect Depth Data for Indoor Mapping Applications
2012 Standout
Review of Earth science research using terrestrial laser scanning
2017 Standout
Predicting blast-induced ground vibration using various types of neural networks
2010 Standout
Evaluation method of rockburst: State-of-the-art literature review
2018
Review: Calibration of the discrete element method
2017 Standout
Semi-automatic extraction of rock mass structural data from high resolution LIDAR point clouds
2011 Standout
Long Term Analysis of Deformations in Salt Mines: Kłodawa Salt Mine Case Study, Central Poland
2017
A comprehensive geomechanical method for the assessment of rockburst hazards in underground mining
2020 Standout
Tailoring of thermal and dielectric properties of LDPE-matrix composites by the volume fraction, density, and surface modification of hollow glass microsphere filler
2013
The use of unmanned aerial vehicles (UAVs) for engineering geology applications
2020 Standout
On the estimation of geological surface roughness from terrestrial laser scanner point clouds
2013
A clumped particle model for rock
2007 Standout
Effect of Model Scale and Particle Size Distribution on PFC3D Simulation Results
2013
Application of a long-range Terrestrial Laser Scanner to a detailed rockfall study at Vall de Núria (Eastern Pyrenees, Spain)
2006
Deriving roughness characteristics of rock mass discontinuities from terrestrial laser scan data
2006
Correction of terrestrial LiDAR intensity channel using Oren–Nayar reflectance model: An application to lithological differentiation
2016
Advanced Geostructural Survey Methods Applied to Rock Mass Characterization
2008
Terrestrial laser scanning of rock slope instabilities
2013
A case study on large deformation failure mechanism of deep soft rock roadway in Xin'An coal mine, China
2016 Standout
An evaluation of the effectiveness of low-cost UAVs and structure from motion for geomorphic change detection
2016 Standout
A new approach for semi-automatic rock mass joints recognition from 3D point clouds
2014
Discrete particle simulation of particulate systems: A review of major applications and findings
2008 Standout
Modeling of Contaminant Transport in Underground Coal Gasification
2008
Recommendations for the quantitative analysis of landslide risk
2013 Standout
Reprint of: Bedrock fault scarp history: Insight from t-LiDAR backscatter behaviour and analysis of structure changes
2015
A discrete element model predicting the strength of ballast stones
2012
Exploring dendrite coherency with the discrete element method
2011
Works of Lanru Jing being referenced
Study of rock joints under cyclic loading conditions
1993
Modeling of fluid flow and solid deformation for fractured rocks with discontinuous deformation analysis (DDA) method
2001
Formulation of discontinuous deformation analysis (DDA) — an implicit discrete element model for block systems
1998
Measuring fracture orientation at exposed rock faces by using a non-reflector total station
2001
A review of techniques, advances and outstanding issues in numerical modelling for rock mechanics and rock engineering
2003 Standout
The scale dependence of rock joint surface roughness
2001
A New Method for In-situ Non-contact Roughness Measurement of Large Rock Fracture Surfaces
2003
DECOVALEX—An international co-operative research project on mathematical models of coupled THM processes for safety analysis of radioactive waste repositories
1995
Effects of model scale and particle size on micro-mechanical properties and failure processes of rocks—A particle mechanics approach
2007
Thermohydromechanics of partially saturated geological media: governing equations and formulation of four finite element models
2001
An effective thermal conductivity model of geological porous media for coupled thermo-hydro-mechanical systems with multiphase flow
2009
Numerical determination of the equivalent elastic compliance tensor for fractured rock masses using the distinct element method
2003
Stress-dependent permeability of fractured rock masses: a numerical study
2004
Modeling coupled THM processes of geological porous media with multiphase flow: Theory and validation against laboratory and field scale experiments
2009
A fully coupled thermo-hydro-mechanical model for simulating multiphase flow, deformation and heat transfer in buffer material and rock masses
2009
Numerical modelling of uniaxial compressive failure of granite with and without saline porewater
2008
Stress effects on permeability in a fractured rock mass with correlated fracture length and aperture
2008
Numerical methods in rock mechanics
2002
A 3-D constitutive model for rock joints with anisotropic friction and stress dependency in shear stiffness
1994