Citation Impact
Citing Papers
Temperature-dependent elastic moduli of lead telluride-based thermoelectric materials
2009
Three‐Dimensional Printing of Complex‐Shaped Alumina/Glass Composites
2009
Chemistry of Soft Porous Crystals: Structural Dynamics and Gas Adsorption Properties
2020 StandoutNobel
The Road for Nanomaterials Industry: A Review of Carbon Nanotube Production, Post‐Treatment, and Bulk Applications for Composites and Energy Storage
2013
Strong, tough and stiff bioinspired ceramics from brittle constituents
2014 Standout
Interactions between Individual Carbon Nanotubes Studied by Rayleigh Scattering Spectroscopy
2006 StandoutNobel
Creating pure nanostructures from electron-beam-induced deposition using purification techniques: a technology perspective
2009
Selective Functionalization of Tailored Nanostructures
2012 StandoutNobel
Mechanical properties of BixSb2−xTe3nanostructured thermoelectric material
2012
Susceptibility constants of Escherichia coli and Bacillus subtilis to silver and copper nanoparticles
2006
The operation of the century: total hip replacement
2007 Standout
Recent developments of zinc oxide based photocatalyst in water treatment technology: A review
2015 Standout
Reinforcement of single-walled carbon nanotube bundles by intertube bridging
2004
High hopes: can molecular electronics realise its potential?
2012 StandoutNobel
Potential of Coatings in Total Hip Replacement
2005
DLS and zeta potential – What they are and what they are not?
2016 Standout
Mechanical deformation of single-crystal ZnO
2002
Design and Preparation of Porous Polymers
2012 Standout
Influence of temperature and atmosphere on the strength and elastic modulus of solid oxide fuel cell anode supports
2016
Nanoindentation of epitaxial GaN films
2000
Machining induced surface integrity in titanium and nickel alloys: A review
2010 Standout
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
2015 Standout
The effect of carbon nanotubes microstructures on reinforcing properties of SWNTs/alumina composite
2007
Effects of the substrate on the determination of thin film mechanical properties by nanoindentation
2002
Molecule-by-Molecule Writing Using a Focused Electron Beam
2012 StandoutNobel
Combining theory and experiment in electrocatalysis: Insights into materials design
2017 StandoutScience
Low‐κ nanocomposite films based on polyimides with grafted polyhedral oligomeric silsesquioxane
2005
Polymer/Silica Nanocomposites: Preparation, Characterization, Properties, and Applications
2008 Standout
Cytotoxicity and Genotoxicity of Silver Nanoparticles in Human Cells
2008 Standout
Finite Element Modeling of Microstructural Changes in Hard Turning
2011
Influence of material microstructure changes on surface integrity in hard machining of AISI 52100 steel
2010
A comprehensive review of ZnO materials and devices
2005 Standout
3D printing of Al2O3/Cu–O interpenetrating phase composite
2010
Analysis of Surface Integrity in Dry and Cryogenic Machining of <i>AZ31B Mg</i> Alloys
2011
Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries
2017 Standout
Nanocomposites: synthesis, structure, properties and new application opportunities
2009 Standout
Mechanical properties of nanocrystalline materials
2005 Standout
Remote Plasma ALD of Platinum and Platinum Oxide Films
2009
Molecule-Independent Electrical Switching in Pt/Organic Monolayer/Ti Devices
2003 StandoutNobel
Polymer nanocomposites: A small part of the story
2007
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
2017 Standout
Exponential temperature dependence and low-bias conductance anomaly in transport through Langmuir–Blodgett monolayer devices
2005
White layer formation due to phase transformation in orthogonal machining of AISI 1045 annealed steel
2008
Atomic Layer Deposition: An Overview
2009 Standout
Alternative dielectric films for rf MEMS capacitive switches deposited using atomic layer deposited Al2O3/ZnO alloys
2006
The effect of high temperature heat treatment on the structure and properties of anodic aluminum oxide
2010
A Composite Gel–Polymer/Glass–Fiber Electrolyte for Sodium‐Ion Batteries
2015 StandoutNobel
Grain-size-dependent thermal conductivity of nanocrystalline yttria-stabilized zirconia films grown by metal-organic chemical vapor deposition
2000
Deformation of nanocrystalline materials by molecular-dynamics simulation: relationship to experiments?
2004
Advanced Thermoelectric Design: From Materials and Structures to Devices
2020 Standout
Surface modification of inorganic nanoparticles for development of organic–inorganic nanocomposites—A review
2013 Standout
Nanoporous, Ultralow‐Dielectric‐ Constant Fluoropolymer Films from Agglomerated and Crosslinked Hollow Nanospheres of Poly(pentafluorostyrene)‐block‐Poly(divinylbenzene)
2005
Low‐Cost Hollow Mesoporous Polymer Spheres and All‐Solid‐State Lithium, Sodium Batteries
2015 StandoutNobel
Recent advances in solid oxide cell technology for electrolysis
2020 StandoutScience
Review on High‐Loading and High‐Energy Lithium–Sulfur Batteries
2017 Standout
Tool life and surface integrity aspects when drilling and hole making in Inconel 718
2007
New approach to nanocomposites of polyimides containing polyhedral oligomeric silsesquioxane for dielectric applications
2004
Exposure Modeling of Engineered Nanoparticles in the Environment
2008 Standout
Polymer Brushes via Surface-Initiated Controlled Radical Polymerization: Synthesis, Characterization, Properties, and Applications
2009 Standout
Nickel foam supported Sn–Co alloy film as anode for lithium ion batteries
2011 StandoutNobel
Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures
2014 Standout
Synthesis and Morphological, Electrochemical Characterization of Sn[sub 92]Co[sub 8] Nanoalloys for Anode Materials in Li Secondary Batteries
2007
Graphene-Wrapped Fe3O4 Anode Material with Improved Reversible Capacity and Cyclic Stability for Lithium Ion Batteries
2010 Standout
Deformation twinning in nanocrystalline materials
2011
A comprehensive experimental study on surface integrity by end milling Ti–6Al–4V
2008
Flexible Nanodielectric Materials with High Permittivity for Power Energy Storage
2013 Standout
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
Nanostructured Metal Oxides and Sulfides for Lithium–Sulfur Batteries
2017 Standout
Recent Progress on Ferroelectric Polymer-Based Nanocomposites for High Energy Density Capacitors: Synthesis, Dielectric Properties, and Future Aspects
2016 Standout
Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology
2004 Standout
Surface Structural Characterization and Mechanical Testing by Nanoindentation Measurements of Hybrid Polymer/clay Nanostructured Multilayer Films
2002
Hardness-based flow stress for numerical simulation of hard machining AISI H13 tool steel
2007
Carbon nanotube–polymer composites: Chemistry, processing, mechanical and electrical properties
2009 Standout
Electrochemical Properties of Disordered-Carbon-Coated SnO[sub 2] Nanoparticles for Li Rechargeable Batteries
2006
Recent Developments in the Chemistry of Cubic Polyhedral Oligosilsesquioxanes
2010 Standout
A numerical model incorporating the microstructure alteration for predicting residual stresses in hard machining of AISI 52100 steel
2010
Sub-surface and surface analysis of high speed machined Ti–6Al–4V alloy
2009
Plating a Dendrite-Free Lithium Anode with a Polymer/Ceramic/Polymer Sandwich Electrolyte
2016 StandoutNobel
Surface properties of platinum thin films as a function of plasma treatment conditions
2003
Nanostructured Electrolytes for Stable Lithium Electrodeposition in Secondary Batteries
2015
Graphene-based polymer nanocomposites
2010 Standout
Nanoporous Ultra‐Low‐Dielectric‐Constant Fluoropolymer Films via Selective UV Decomposition of Poly(pentafluorostyrene)‐block‐Poly(methyl methacrylate) Copolymers Prepared Using Atom Transfer Radical Polymerization
2005
Mechanical Reinforcement of Polymers Using Carbon Nanotubes
2006 Standout
Nanoscale thermal transport
2003 Standout
Superior Conductive Solid-like Electrolytes: Nanoconfining Liquids within the Hollow Structures
2015 StandoutNobel
Modeling of white layer formation under thermally dominant conditions in orthogonal machining of hardened AISI 52100 steel
2007
Density Functional Theory Model of Adsorption Deformation
2006
Mechanical properties at nanometric scale of alumina layers formed in sulphuric acid anodizing under burning conditions
2011
Tough-to-brittle transition in multiwalled carbon nanotube (MWNT)/polycarbonate nanocomposites
2006
Form and Function in Multilayer Assembly: New Applications at the Nanoscale
2004 Standout
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
2018 Standout
Low-Cost, Dendrite-Blocking Polymer-Sb2O3Separators for Lithium and Sodium Batteries
2014 StandoutNobel
Small but strong: A review of the mechanical properties of carbon nanotube–polymer composites
2006 Standout
Nanoporous Polymer‐Ceramic Composite Electrolytes for Lithium Metal Batteries
2013
A finite element modeling approach to predicting white layer formation in nickel superalloys
2009
Platinum dioxide phases: Relative thermodynamic stability and kinetics of inter-conversion from first-principles
2006
Surface integrity in material removal processes: Recent advances
2011 Standout
On the mechanical properties of nanoporous anodized alumina by nanoindentation and sliding tests
2011
Porous Anodic Aluminum Oxide: Anodization and Templated Synthesis of Functional Nanostructures
2014 Standout
Works of L. Riester being referenced
Surface hardness enhancement in ion-implanted amorphous carbon
1996
Effect of surface integrity of hard turned AISI 52100 steel on fatigue performance
2007
An Investigation of Thin-Film Coating/Substrate Systems by Nanoindentation
1998
Nanoindentation Characterisation of Coated Systems: P:S2 - A New Approach Using the Continuous Stiffness Technique
1998
Properties of nitrogen-implanted alloys and comparison materials
1997
Porous Methylsilsesquioxane for Low-k Dielectric Applications
2001
Direct observation of toughening mechanisms in carbon nanotube ceramic matrix composites
2003
Mechanical properties of highly ordered nanoporous anodic alumina membranes
2004
Electrochemical and antimicrobial properties of diamondlike carbon-metal composite films
2005
Analysis of white layers formed in hard turning of AISI 52100 steel
2004
Young's modulus of nanocrystalline Fe measured by nanoindentation
1995
The effect of implantation temperature on the surface hardness, elastic modulus and Raman scattering in amorphous carbon
1997
The Plasticity Response Of 6H-Sic and Related Isostructural Materials to Nanoindentation: Slip vs Densification
1998
Comparison of different experimental techniques for determination of elastic properties of solids
2004
Metallurgical analysis and nanoindentation characterization of Ti–6Al–4V workpiece and chips in high-throughput drilling
2007
Characterization of sputtered amorphous platinum dioxide films
1998