Citation Impact
Citing Papers
Effect of nano- and micro-particle additions on moisture absorption in thixotropic room temperature cure epoxy-based adhesives for bonded-in timber connections
2010
Sustainable and Bio-Based Food Packaging: A Review on Past and Current Design Innovations
2023 Standout
Preparation and properties of POSS grafted polypropylene by reactive blending
2008
Living Radical Polymerization by the RAFT Process – A Third Update
2012 Standout
Living Radical Polymerization by the RAFT Process – A Second Update
2009 Standout
Polyhedral Oligomeric Silsesquioxane‐ and Fullerene‐End‐Capped Poly(ε‐caprolactone)
2008
Effects of resin hydrophilicity on water sorption and changes in modulus of elasticity
2005 Standout
Physical and mechanical properties of PLA, and their functions in widespread applications — A comprehensive review
2016 Standout
An overview of chemical additives present in plastics: Migration, release, fate and environmental impact during their use, disposal and recycling
2017 Standout
Water sorption/solubility of dental adhesive resins
2006 Standout
Assessment of water contamination caused by a mutagenic textile effluent/dyehouse effluent bearing disperse dyes
2009
Synthetic organic dyes as contaminants of the aquatic environment and their implications for ecosystems: A review
2020 Standout
Mechanical and chemical recycling of solid plastic waste
2017 Standout
Biorenewable, transparent, and oxygen/moisture barrier nanocellulose/nanochitin-based coating on polypropylene for food packaging applications
2021
Preparation of molecularly imprinted polymer for use as SPE adsorbent for the simultaneous determination of five sulphonylurea herbicides by HPLC
2013
Dental adhesion review: Aging and stability of the bonded interface
2007 Standout
Preparation of magnetic molecularly imprinted polymer for selective recognition of resveratrol in wine
2013
State of the art etch-and-rinse adhesives
2010 Standout
Polymeric Nanocomposites—Polyhedral Oligomeric Silsesquioxanes (POSS) as Hybrid Nanofiller
2004
Phase separation and morphology development in a thermoplastic-modified toughened epoxy
2012
Allylated novolac/4,4′‐bismaleimidodiphenylmethane resin containing polyhedral oligomeric silsesquioxane: Preparation, morphology and thermal stability
2007
Molecular imprinting science and technology: a survey of the literature for the years 2004-2011
2014
A review on polymer–layered silicate nanocomposites
2008 Standout
Emerging Engineered Wood for Building Applications
2022 Standout
Service Life of a High-Density Polyethylene Geomembrane under Simulated Landfill Conditions at 85°C
2014 Standout
Phenolic Resin/Octa(aminophenyl)-T8-Polyhedral Oligomeric Silsesquioxane (POSS) Hybrid Nanocomposites: Synthesis, Morphology, Thermal and Mechanical Properties
2007
Flexible transparent wood prepared from poplar veneer and polyvinyl alcohol
2019
Analysis of Dyes in Cosmetics: Challenges and Recent Developments
2018
Comparative study of the degradation kinetics of three powder thermoset coatings
2004
Improved second-order Møller–Plesset perturbation theory by separate scaling of parallel- and antiparallel-spin pair correlation energies
2003 Standout
Novel epoxy nanocomposite of low Dk introduced fluorine‐containing POSS structure
2007
Characterisation of the water absorption, mechanical and thermal properties of recycled cellulose fibre reinforced vinyl-ester eco-nanocomposites
2012
Surface energies of linear and cross-linked polymers based on isobornyl methacrylate and methacryl-heptaisobutyl POSS
2008
Preparation and Characterization of Polyurethane Hybrids from Reactive Polyhedral Oligomeric Silsesquioxanes
2006
A Review on Natural Fiber Reinforced Polymer Composite and Its Applications
2015 Standout
The M06 suite of density functionals for main group thermochemistry, thermochemical kinetics, noncovalent interactions, excited states, and transition elements: two new functionals and systematic testing of four M06-class functionals and 12 other functionals
2007 Standout
The kinetics of B‐a and P‐a type copolybenzoxazine via the ring opening process
2004
Self-assembly behavior of hepta(3,3,3-trifluoropropyl) polyhedral oligomeric silsesquioxane-capped poly(ɛ-caprolactone) in epoxy resin: Nanostructures and surface properties
2008
Phenol‐urea‐formaldehyde cocondensed resol resins: Their synthesis, curing kinetics, and network properties
2003
A comparison of the mechanical strength and stiffness of MWNT-PMMA and MWNT-epoxy nanocomposites
2007
Synthesis of tadpole-shaped POSS-containing hybrid polymers via “click chemistry”
2010
Preparation of VB‐a/POSS hybrid monomer and its polymerization of polybenzoxazine/POSS hybrid nanocomposites
2008
Water absorption, mechanical, and thermal properties of halloysite nanotube reinforced vinyl-ester nanocomposites
2013
Nonisothermal cure kinetics of diglycidylether of bisphenol‐A/amine system reinforced with nanosilica particles
2007
Polymer/Silica Nanocomposites: Preparation, Characterization, Properties, and Applications
2008 Standout
Vegetable oil‐based thermosetting polymers
2009
Morphology and thermal properties of inorganic–organic hybrids involving epoxy resin and polyhedral oligomeric silsesquioxanes
2004
Curing behavior of epoxy resin/tung oil anhydride exfoliated nanocomposite by differential scanning calorimetry
2004
Thermal stability and flame retardancy of polyurethanes
2009 Standout
High-efficiency ITO-free polymer solar cells using highly conductive PEDOT:PSS/surfactant bilayer transparent anodes
2013
Cure kinetics of a cobalt catalysed dicyanate ester monomer in air and argon atmospheres from DSC data
2004
Preparation and characterization of cellulose hybrids grafted with the polyhedral oligomeric silsesquioxanes (POSS)
2009
Properties of silsesquioxane coating modified carbon fibre/polyarylacetylene composites
2007
Nanostructures and properties of hybrid films based on DGEBA and modified with APES/PGE polyhedral oligomeric silsesquioxanes
2007
Effect of side chain architecture on dielectric relaxation in polyhedral oligomeric silsesquioxane/polypropylene oxide nanocomposites
2009
Role of Catechins in the Antioxidant Capacity of an Active Film Containing Green Tea, Green Coffee, and Grapefruit Extracts
2012
Effects of octa(3-chloroammoniumpropyl)octasilsesquioxane on the epoxy self-polymerisation and epoxy–amine curing
2009
Synthesis via RAFT Polymerization of Tadpole-Shaped Organic/Inorganic Hybrid Poly(acrylic acid) Containing Polyhedral Oligomeric Silsesquioxane (POSS) and Their Self-assembly in Water
2009
Effect of thermo-mechanical cycles on the physico-chemical properties of poly(lactic acid)
2007
Epoxy nanocomposites with octa(propylglycidyl ether) polyhedral oligomeric silsesquioxane
2005
Preparation and characterization of organic–inorganic hybrid composites based on multiepoxy silsesquioxane and cyanate resin
2006
Controlling POSS dispersion in epoxy in nanocomposite by introducing multi-epoxy POSS groups
2007
Application of isothermal and model‐free isoconversional modes in DSC measurement for the curing process of the PU system
2001
Influence of methacryl polyhedral oligomeric silsesquioxane on the thermal and mechanical properties of methylsilicone resin
2008
Bioplastic made from seaweed polysaccharides with green production methods
2021 Standout
Silsesquioxane Barrier Materials
2007
Characterization of negative-type photoresists containing polyhedral oligomeric silsesquioxane methacrylate
2008
Lignocellulosic biomass: a sustainable platform for the production of bio-based chemicals and polymers
2015 Standout
Bio-Packaging Material Impact on Blueberries Quality Attributes under Transport and Marketing Conditions
2021
Thermal stability and water uptake of high performance epoxy layered silicate nanocomposites
2003
Semiempirical hybrid density functional with perturbative second-order correlation
2006 Standout
Wood polymer composites and their contribution to cascading utilisation
2015
Polypropylene–polyhedral oligomeric silsesquioxanes (POSS) nanocomposites
2005
Biodegradable active, intelligent, and smart packaging materials for food applications
2022
A perspective approach on the amine reactivity and the hydrogen bonds effect on epoxy-amine systems
2019
Chitosan for food packaging: Recent advances in active and intelligent films
2021 Standout
Organometal halide perovskite solar cells: degradation and stability
2015 Standout
Synthesis and application of epoxy resins: A review
2015 Standout
Fluid uptake behavior of multifunctional epoxy blends
2012
Thermodynamic analysis of polymerization-induced phase separation of a polystyrene in epoxy/monoamine–diamine systems. Effect of monoamine–diamine proportion on the phase diagram
2011
Phosphorus-containing flame retardant epoxy thermosets: Recent advances and future perspectives
2021 Standout
New prospects in flame retardant polymer materials: From fundamentals to nanocomposites
2008 Standout
Silver Nanoparticles: Synthesis, Characterization, Properties, Applications, and Therapeutic Approaches
2016 Standout
ICTAC Kinetics Committee recommendations for collecting experimental thermal analysis data for kinetic computations
2014 Standout
Polybenzoxazines—New high performance thermosetting resins: Synthesis and properties
2007 Standout
Using time-of-flight secondary ion mass spectrometry and multivariate statistical analysis to detect and image octabenzyl-polyhedral oligomeric silsesquioxane in polycarbonate
2006
Synthesis and self‐assembly of tadpole‐shaped organic/inorganic hybrid poly(N‐isopropylacrylamide) containing polyhedral oligomeric silsesquioxane via RAFT polymerization
2008
Are We Speaking the Same Language? Recommendations for a Definition and Categorization Framework for Plastic Debris
2019 Standout
Degradation behaviour of HDPE geomembranes with high and low initial high-pressure oxidative induction time
2014
Additive manufacturing and sustainability: an exploratory study of the advantages and challenges
2016 Standout
Recent Developments in the Chemistry of Cubic Polyhedral Oligosilsesquioxanes
2010 Standout
Hybrid Nanocomposites: Advanced Nonlinear Method for Calculating Key Kinetic Parameters of Complex Cure Kinetics
2010
Epoxy/polyhedral oligomeric silsesquioxane nanocomposites from octakis(glycidyldimethylsiloxy)octasilsesquioxane and small‐molecule curing agents
2006
Thermal and Surface Properties of Phenolic Nanocomposites Containing Octaphenol Polyhedral Oligomeric Silsesquioxane
2006
Synthesis and characterization of cage octa(aminopropylsilsesquioxane)
2006
Crystallization and morphology study of polyhedral oligomeric silsesquioxane (POSS)/polysiloxane elastomer composites prepared by melt blending
2007
Synthesis and properties of two novel silicon‐containing cycloaliphatic epoxy resins for electronic packaging application
2011
Bacterial Nanocellulose—A Biobased Polymer for Active and Intelligent Food Packaging Applications: Recent Advances and Developments
2020
Viscoelastic properties of POSS–styrene nanocomposite blended with polystyrene
2009
FTIR spectroscopy as a tool for nano-material characterization
2010
Thermodegradation kinetics of epoxy/DDS/POSS system
2007
Biodegradable polymer films from seaweed polysaccharides: A review on cellulose as a reinforcement material
2017
Curing behavior of epoxy/POSS/DDS hybrid systems
2007
A review on dynamic mechanical properties of natural fibre reinforced polymer composites
2015 Standout
Selective Vinyl Functionalization of Octakis(dimethylsiloxy)octasilsesquioxane with Allylbenzene and 1,5-Hexadiene and Copolymerization of the Products with Bis(dimethylsilyl)benzene
2004
Monofunctional Epoxy-POSS Dispersed in Epoxy−Amine Networks: Effect of a Prereaction on the Morphology and Crystallinity of POSS Domains
2007
A set of standard enthalpies of formation for benchmarking, calibration, and parametrization of electronic structure methods
2000
Network structures of polyhedral oligomeric silsesquioxane based nanocomposites: A Monte Carlo study
2004
Review article: Polymer-matrix Nanocomposites, Processing, Manufacturing, and Application: An Overview
2006 Standout
Cure kinetics of carbon nanotube/tetrafunctional epoxy nanocomposites by isothermal differential scanning calorimetry
2004
Isothermal cure kinetics of epoxy/phenol-novolac resin blend system initiated by cationic latent thermal catalyst
2000
Inorganic–organic nanocomposites of polybenzoxazine with octa(propylglycidyl ether) polyhedral oligomeric silsesquioxane
2005
Thermo-viscoelastic properties of silica particulate-reinforced epoxy composites: Considered in terms of the particle packing model
2006
Polyhedral Oligomeric Silsesquioxane Containing Copolymers for Negative‐Type Photoresists
2006
Fluoroelastomer Copolymers Incorporating Polyhedral Oligomeric Silsesquioxane
2008
Silicon-containing flame retardant epoxy resins: Synthesis, characterization and properties
2006
Viscoelastic properties and residual stresses in polyhedral oligomeric silsesquioxane‐reinforced epoxy matrices
2008
Structure−Property Relationships in Organic−Inorganic Nanomaterials Based on Methacryl−POSS and Dimethacrylate Networks
2006
Study on the effect of rare earth metal triflates as initiators in the cationic curing of DGEBA/γ-valerolactone mixtures and characterization of the thermosets obtained
2008
Formation of nanostructured epoxy networks containing polyhedral oligomeric silsesquioxane (POSS) blocks
2007
Advances in research and development of bioplastic for food packaging
2018
Thermal and dielectric properties and curing kinetics of nanomaterials formed from poss-epoxy and meta-phenylenediamine
2004
Surface modification of cotton nanocrystals with a silane agent
2012 Standout
Review of current trends in research and applications of sandwich structures
2018 Standout
Graphene family, and their hybrid structures for electromagnetic interference shielding applications: Recent trends and prospects
2021 Standout
Using silica nanoparticles as curing reagents for epoxy resins to form epoxy–silica nanocomposites
2005
Dispersion of nanofillers in high performance polymers using reactive solvents as processing aids
2001
Biocomposites reinforced with natural fibers: 2000–2010
2012 Standout
Recent advance in research on halloysite nanotubes-polymer nanocomposite
2014 Standout
Mechanical characterization of polyhedral oligomeric silsesquioxane/polypropylene blends
2007
Hydrogen bonding interactions and miscibility between phenolic resin and octa(acetoxystyryl) polyhedral oligomeric silsesquioxane (AS‐POSS) nanocomposites
2006
Thermo-oxygen degradation mechanisms of POSS/epoxy nanocomposites
2007
A Review of Natural Fibers Used in Biocomposites: Plant, Animal and Regenerated Cellulose Fibers
2015 Standout
Large‐Scale Fabrication of Boron Nitride Nanosheets and Their Utilization in Polymeric Composites with Improved Thermal and Mechanical Properties
2009 Standout
Organic–inorganic hybrid materials from a new octa(2,3-epoxypropyl)silsesquioxane with diamines
2005
Isoconversional Kinetic Analysis of Thermally Stimulated Processes in Polymers
2006 Standout
Epoxy nanocomposites containing mercaptopropyl polyhedral oligomeric silsesquioxane: Morphology, thermal properties, and toughening mechanism
2008
Preparation and characterization of epoxy/polyhedral oligomeric silsesquioxane hybrid nanocomposites
2009
Flexible and robust silver coated non-woven fabric reinforced waterborne polyurethane films for ultra-efficient electromagnetic shielding
2020 Standout
Mechanical properties and size stability of wheat straw and recycled LDPE composites coupled by waterborne coupling agents
2010
Chemistry of Carbon Nanotubes
2006 Standout
Effects of silsesquioxane coating structure on mechanical interfacial properties of carbon fibre/polyarylacetylene composites
2007
Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites
2008 Standout
Novel approach to preparing epoxy/polyhedral oligometric silsesquioxane hybrid materials possessing high mass fractions of polyhedral oligometric silsesquioxane and good homogeneity
2006
Dynamic mechanical characterization of epoxy/epoxycyclohexyl–POSS nanocomposites
2011
Epoxy Resin Containing Octamaleimidophenyl Polyhedral Oligomeric Silsesquioxane
2005
Nanostructured Thermosets from Epoxy Resin and an Organic−Inorganic Amphiphile
2007
Model‐free kinetics: Curing behavior of phenol formaldehyde resins by differential scanning calorimetry
2002
Synthesis and characterization of cellulose/silica hybrid materials with chemical crosslinking
2009
ICTAC Kinetics Committee recommendations for performing kinetic computations on thermal analysis data
2011 Standout
Polymer composites made of multi-walled carbon nanotubes and graphene nano-sheets: Effects of sandwich structures on their electromagnetic interference shielding effectiveness
2015
Water-Compatible Molecularly Imprinted Microspheres in Pipette Tip Solid-Phase Extraction for Simultaneous Determination of Five Fluoroquinolones in Eggs
2013
Silicon‐Containing Cycloaliphatic Epoxy Resins with Systematically Varied Functionalities: Synthesis and Structure/Property Relationships
2011
Molecular imprinting: perspectives and applications
2016 Standout
Polypropylene metal functionalised POSS nanocomposites: A study by thermogravimetric analysis
2005
A Novel Photocrosslinkable Polyhedral Oligomeric Silsesquioxane and Its Nanocomposites with Poly(vinyl cinnamate)
2004
Techniques for Analysis of Plant Phenolic Compounds
2013 Standout
Works of L. Barral being referenced
Barrier and physical properties of polypropylene/highbarrier ethylene vinyl alcohol copolymer blends compatibilized with a sodium ionomer
2009
Preparation, evaluation and characterization of quercetin-molecularly imprinted polymer for preconcentration and clean-up of catechins
2012
Synthesis and characterization of bisphenol-A imprinted polymer as a selective recognition receptor
2011
Liquid chromatographic methods to analyze hindered amines light stabilizers (HALS) levels to improve safety in polyolefins
2010
High-performance liquid chromatography analysis of ten dyes for control of safety of commercial articles
2007
Processing and characterization of polyols plasticized-starch reinforced with microcrystalline cellulose
2016
Mechanical and fracture behavior of polypropylene/poly(ethylene-co-vinyl alcohol) blends compatibilized with ionomer Na+
2005
Thermodegradation kinetics of a hybrid inorganic–organic epoxy system
2005
Isothermal cure of an epoxy/cycloaliphatic amine system. Vitrification and gelation
1995
Effects of vinyltrimethoxy silane on thermal properties and dynamic mechanical properties of polypropylene–wood flour composites
2008
Effect of several variables in the polymer toys additive migration to saliva
2011
Development, validation and application of Micellar Electrokinetic Capillary Chromatography method for routine analysis of catechins, quercetin and thymol in natural samples
2011
Blends of acrylonitrile–butadiene–styrene with an epoxy/cycloaliphatic amine resin: Phase‐separation behavior and morphologies
2002
Effect of water sorption on the structure and mechanical properties of an epoxy resin system
2001
FTIR study on the nature of water sorbed in polypropylene (PP)/ethylene alcohol vinyl (EVOH) films
2006
Study of an octaepoxysilsesquioxane cured with a diamine
2005
Isothermal cure kinetics of a diglycidyl ether of bisphenol A/1,3‐bisaminomethylcyclohexane (DGEBA/1,3‐BAC) epoxy resin system
1995
Rheological, Mechanical and Thermal Behaviour of Wood Polymer Composites Based on Recycled Polypropylene
2010
Kinetic studies of the effect of ABS on the curing of an epoxy/cycloaliphatic amine resin
2000
An approach to imprint irganox 1076: Potential application to the specific migration test in olive oil
2010
Organic/inorganic hybrid materials from an epoxy resin cured by an amine silsesquioxane
2007
Degradation Kinetics of an Epoxy/Cycloaliphatic Amine Resin Under Isothermal and Non-isothermal Conditions
1999
Thermal behaviour of a polyhedral oligomeric silsesquioxane with epoxy resin cured by diamines
2003
TTT isothermal cure diagram of a dyglicidyl ether of bisphenol A/1,3-bisaminomethylcyclohexane (DGEBA/1,3-BAC) epoxy resin system
1996
Epoxy Networks Containing Large Mass Fractions of a Monofunctional Polyhedral Oligomeric Silsesquioxane (POSS)
2003
Blends of an epoxy/cycloaliphatic amine resin with poly(ether imide)
2000
Isothermal curing by dynamic mechanical analysis of three epoxy resin systems: Gelation and vitrification
2001
Dynamic mechanical analysis of an epoxy/thermoplastic blend: polymerization‐induced phase separation
2002
Thermal properties of amine cured diglycidyl ether of bisphenol A epoxy blended with poly(ether imide)
2000
Effects of a mixture of stabilizers on the structure and mechanical properties of polyethylene during reprocessing
2004
Application of FTIR spectroscopy to determine transport properties and water–polymer interactions in polypropylene (PP)/poly(ethylene-co-vinyl alcohol) (EVOH) blend films: Effect of poly(ethylene-co-vinyl alcohol) content and water activity
2009
Selection of a precursor of a monofunctional polyhedral oligomeric silsesquioxane reacted with aromatic diamines
2004
Plasticized Poly(lactic acid)–Poly(hydroxybutyrate) (PLA–PHB) Blends Incorporated with Catechin Intended for Active Food-Packaging Applications
2014
Influence of the stretching in the crystallinity of biaxially oriented polypropylene (BOPP) films
2005
Enthalpies of combustion of oxamic acid, oxamide, and dithiooxamide
1988
Effect of poly(styrene- co -acrylonitrile) on the curing of an epoxy/amine resin
2001
Epoxy/POSS organic–inorganic hybrids: ATR-FTIR and DSC studies
2008
Decomposition behavior of epoxy-resin systems cured by diamines
2000
Cure kinetics of an epoxy system containing tetraglycidyl-4,4′-diaminodiphenylmethane (TGDDM) and a multifunctional Novolac glycidyl ether cured with 4,4′-diaminodiphenylsulfone (DDS)
1997
Cure kinetics of amine-cured diglycidyl ether of bisphenol
2000