Citation Impact
Citing Papers
Fundamentals and advances in magnesium alloy corrosion
2017 Standout
Metal additive manufacturing in aerospace: A review
2021 Standout
Manipulation of Strength During Sintering as a Basis for Obtaining Rapid Densification without Distortion
2001
The Chemical Imagination at Work in Very Tight Places
2007 StandoutNobel
Dilatant shear bands in solidifying metals
2007 Nature
Ab‐initiosimulations of materials using VASP: Density‐functional theory and beyond
2008 Standout
Interpenetrating Polar and Nonpolar Sublattices in Intermetallics: The NaCd2Structure
2007 Nobel
3D printing of high-strength aluminium alloys
2017 StandoutNature
Effects of processing parameters on aluminide morphology in aluminium grain refining master alloys
1991
Study of the mechanism of grain refinement of aluminum after additions of Ti- and B-containing master alloys
1993
SVM-DS fusion based soft fault detection and diagnosis in solar water heaters
2018 Standout
Two-dimensional friction stir welding process model based on fluid mechanics
2003
Grain structure evolution in Inconel 718 during selective electron beam melting
2016
The status of rapid solidification of alloys in research and application
1984
Effect of substrate orientation on the columnar-to-equiaxed transition in laser surface remelted single crystal superalloys
2015
A critical review of high entropy alloys and related concepts
2016 Standout
Effect of solution heat treatment and additives on the microstructure of Al-Si (A413.1) automotive alloys
2003
Microstructure and Mechanical Properties of Rapidly Solidified Al–Cr–Ce–M (M=Transition Metal) Alloys Containing High Volume Fraction of the Icosahedral Phase
1995
Understanding grain refinement in aluminium welding
2015
Wear resistance of amorphous alloys and related materials
2002
Formation, thermal stability and electrical resistivity of quasicrystalline phase in rapidly quenched Al-Cr alloys
1987
Phase relations and precipitation in Al–Mg–Si alloys with Cu additions
2003
The heat treatment of Al–Si–Cu–Mg casting alloys
2010
Understanding Detrimental and Beneficial Grain Boundary Effects in Halide Perovskites
2018
Modelling of inoculation of metallic melts: application to grain refinement of aluminium by Al–Ti–B
2000 Standout
Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
2017 Standout
High-strength aluminum alloys containing nanoquasicrystalline particles
2000
Behavior of metal alloys in the semisolid state
1991 Standout
Review: liquid phase sintering
2008 Standout
Grain-refinement mechanisms in titanium alloys
2008
Discussion of “the role of boron in the grain refinement of aluminum with titanium”
1988
Application of cast Al–Si alloys in internal combustion engine components
2014 Standout
New studies of nucleation mechanisms in aluminium alloys: implications for grain refinement practice
1998
Thermal stability of Mg2Si0.4Sn0.6 in inert gases and atomic-layer-deposited Al2O3 thin film as a protective coating
2016 StandoutNobel
Influence of microstructure on grain refining performance of Al–Ti–B master alloys
1993
Sich durchdringende polare und unpolare Untergitter in intermetallischen Phasen: die Struktur von NaCd2
2007 Nobel
Evolution in microstructure and properties during non-isothermal annealing of a cold-rolled Al–Mn–Fe–Si alloy with different microchemistry states
2015
The role of boron in the grain Refinement of Aluminum with Titanium
1987
Grain refinement of aluminium and its alloys by heterogeneous nucleation and alloying
2002 Standout
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Corrosion behaviour of friction stir-welded AA6005-T6 using a bobbin tool
2016
The Grain Refining of Aluminum and Phase Relationships in the Al-Ti-B System
1984
Additivity and isokinetic behaviour in relation to diffusion controlled growth
2000
Review of selective laser melting: Materials and applications
2015 Standout
Structure and mechanical strength of Al-V-Fe melt-spun ribbons containing high volume fraction of nanoscale amorphous particles
1996
Influence of Sc modification on the fluidity of an A356 aluminum alloy
2009
Effect of weld cooling rate on Laves phase formation in Inconel 718 fusion zone
2013
Hexagonal ferrites: A review of the synthesis, properties and applications of hexaferrite ceramics
2012 Standout
Effect of Si and Cu concentrations and solidification rate on soundness in casting structure in Al–Si–Cu alloys
2010
Crack susceptibility of binary aluminum alloys during solidification
2016
Past, present, and future of soft magnetic composites
2018 Standout
Interfacial characterization of SLM parts in multi-material processing: Metallurgical diffusion between 316L stainless steel and C18400 copper alloy
2014
Sorting Metrics for Customized Phosphorus Diffusion Gettering
2014
Accuracy of ab initio methods in predicting the crystal structures of metals: A review of 80 binary alloys
2005
Advanced Thermoelectric Design: From Materials and Structures to Devices
2020 Standout
Grain refinement by Al–Ti–B alloys in aluminium melts: a study of the mechanisms of poisoning by zirconium
1999
Modification of eutectic silicon in Al–Si alloys
2008
Effect of copper and solidification conditions on the microstructure and mechanical properties of Al–Si–Mg alloys
2004
Grain refinement of aluminum alloys: Part I. the nucleant and solute paradigms—a review of the literature
1999
Amorphous, nanoquasicrystalline and nanocrystalline alloys in Al-based systems
1998 Standout
Recent advances in friction-stir welding – Process, weldment structure and properties
2008 Standout
Enhanced manufacturing possibilities using multi-materials in laser metal deposition
2018
A review of dynamic recrystallization phenomena in metallic materials
2016 Standout
Mechanical alloying and milling
2001 Standout
Effect of a controlled volume fraction of dendritic phases on tensile and compressive ductility in La-based metallic glass matrix composites
2004 Standout
Non-isothermal tensile tests during solidification of Al–Mg–Si–Cu alloys: Mechanical properties in relation to the phenomenon of hot tearing
2006
Densification mechanism and microstructural evolution in selective laser sintering of Al–12Si powders
2010
Contribution to ternary system Al-Ti-B Part 1: Study of diborides present in the alulminium corner
1998
Advances in additive manufacturing of metal-based functionally graded materials
2020
Solidification and precipitation behaviour of Al-Si-Mg casting alloys
2001
Python Materials Genomics (pymatgen): A robust, open-source python library for materials analysis
2012 Standout
Magnetization Dynamics of Amorphous Ribbons and Wires Studied by Inductance Spectroscopy
2010
Microstructure and elevated-temperature strength of P/M Al-(Cr or Mn)-Fe-(Ti or V) quaternary alloys containing quasicrystalline phase.
1998
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
2015 Standout
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
2016 Standout
Microstructural modelling in metals processing
2002
High Mechanical Strength of Quasicrystalline Phase Surrounded by fcc-Al Phase in Rapidly Solidified Al–Mn–Ce Alloys
1992
Crystal structure and stability of complex precipitate phases in Al–Cu–Mg–(Si) and Al–Zn–Mg alloys
2001
On the sluggish recrystallization of a cold-rolled Al–Mn–Fe–Si alloy
2015
Ultrahigh Strength of Rapidly Solidified Al<SUB>96−<I>x</I></SUB>Cr<SUB>3</SUB>Ce<SUB>1</SUB>Co<I><SUB>x</SUB></I> (<I>x</I>=1, 1.5 and 2%) Alloys Containing an Icosahedral Phase as a Main Component
1994
Improving the Carrier Lifetime of Tin Sulfide via Prediction and Mitigation of Harmful Point Defects
2017 StandoutNobel
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
The Open Quantum Materials Database (OQMD): assessing the accuracy of DFT formation energies
2015 Standout
High-Efficiency Perovskite Solar Cells
2020 Standout
Mechanical properties in the semi-solid state and hot tearing of aluminium alloys
2003
Friction stir welding of aluminium alloys
2009 Standout
Impact of structure and flow-path on in situ synthesis of AlN: Dynamic microstructural evolution of Al-AlN-Si materials
2018
Reaction of fluoride salts with aluminium
1996
Optimisation of solution treatment of cast Al–Si–Cu alloys
2009
Grain refining of aluminium and its alloys using inoculants
1989
Amorphous glass-covered magnetic wires: Preparation, properties, applications
1996
Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 26%
2017 Standout
Effects of solutes on grain refinement of selected wrought aluminium alloys
1997
Effect of heterogeneously distributed pre-existing dispersoids on the recrystallization behavior of a cold-rolled Al–Mn–Fe–Si alloy
2015
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
The effect of grain refinement on the formation of casting defects in alloy 356 castings
2000
Mechanical behavior of amorphous alloys
2007 Standout
Building intuition of iron evolution during solar cell processing through analysis of different process models
2015
Criteria for developing castable, creep-resistant aluminum-based alloys – A review
2006
Probing anisotropy of Seebeck coefficient and enhanced thermoelectric performance of Mg2Si0.35Sn0.65 single crystal
2017
Quasicrystals: structure and stability
1993
Wear and friction behavior of nanosized TiB2 and TiO2 particle-reinforced casting A356 aluminum nanocomposites: A comparative study focusing on particle capture in matrix
2015
Optimizing the composition of master alloys for grain refining aluminium
1996
Effects of processing parameters on the performance of Al grain refinement master alloys AlTi and AlB in small ingots
1997
A review on the production of metal matrix composites through stir casting – Furnace design, properties, challenges, and research opportunities
2019 Standout
Strengthening in Al alloy nano composites fabricated by ultrasound assisted solidification technique
2015
Before Li Ion Batteries
2018 Standout
High-strength aluminum- and zirconium-based alloys containing nanoquasicrystalline particles
2000
High Tolerance to Iron Contamination in Lead Halide Perovskite Solar Cells
2017 StandoutNobel
Advanced Characterization Techniques for Sodium‐Ion Battery Studies
2018
Tailoring in-situ TiB2 particulates in aluminum matrix composites
2017
Impurity‐to‐efficiency simulator: predictive simulation of silicon solar cell performance based on iron content and distribution
2010
Precipitates in Al–Cu alloys revisited: Atom-probe tomographic experiments and first-principles calculations of compositional evolution and interfacial segregation
2011
Selective laser melting of AlSi10Mg alloy: Process optimisation and mechanical properties development
2014 Standout
Exploring dendrite coherency with the discrete element method
2011
High Strength Al–V–M (M=Fe, Co or Ni) Alloys Containing High Volume Fraction of Nanoscale Amorphous Precipitates
1995
Status and prospects of Al2O3-based surface passivation schemes for silicon solar cells
2012
Works of L. Arnberg being referenced
Preparation of FeCrMoC amorphous powders and microstructure and mechanical properties of their hot-pressed products
1987
Quantitative study on the precipitation behavior of dispersoids in DC-cast AA3003 alloy during heating and homogenization
2003
Impact of Iron, Nickel and Chromium in Feedstock on Multicrystalline Silicon Solar Cell Properties
2009
Effect of iron in silicon feedstock on p- and n-type multicrystalline silicon solar cells
2008
Microstructure of rapidly solidified Al2O3 dispersion strengthened type 316 stainless steel
1981
The Structure of the delta-Phase in the Cu--Sn System. A Phase of gamma-Brass Type with an 18 Å Superstructure.
1976
Nanostructured magnesium silicide Mg2Si and its electrochemical performance as an anode of a lithium ion battery
2017
1: Production and properties of master alloys of Al–Ti–B type and their ability to grain refine aluminium
1982
Study of Dendrite Coherency in Al-Si Alloys During Equiaxed Dendritic Solidification
1995
Modelling dissolution of Mg2Si and homogenisation in Al-Si-Mg casting alloys
1999
The rheological properties of solidifying aluminum foundry alloys
1996
Evolution of eutectic intermetallic particles in DC-cast AA3003 alloy during heating and homogenization
2003
Intermetallic particles in Al–Ti–B–type master alloys for grain refinement of aluminium
1982
Theoretical analysis of residual stress effects on the magnetostrictive properties of amorphous wires
1990
Microstructure of rapidly solidified path a prime candidate alloys
1981
Effect of grain refinement on the fluidity of two commercial Al-Si foundry alloys
1996
Dendrite coherency of Al-Si-Cu alloys
2001
Measurement of grain bridging in some Al-Cu and Al-Sn alloys
2003
Analytical scanning transmission electron microscopic study on metastable modulated structure in a rapidly quenched Fe-22Ni-8AI-2.4C alloy
1986
The microstructure of neutron irradiated rapidly solidified path a prime candidate alloys
1981
Mechanical properties and structure of rapidly solidified high titanium stabilized 316 stainless steel
1981
The effect of Ni and V trace elements on the mechanical properties of A356 aluminium foundry alloy in as-cast and T6 heat treated conditions
2014
Compositional analysis of the icosahedral phase in rapidly quenched Al-Mn and Al-V alloys
1986
The structures of the γ-phases in the Pd–Cd and Pt–Cd systems
1980
In situ observations of dendritic fragmentation due to local solute-enrichment during directional solidification of an aluminum alloy
2007
Dislocation generation at near-coincidence site lattice grain boundaries during silicon directional solidification
2014
The Crystal Structure of Al(x)Cu2Mg(12-x)Si7, (h-AlCuMgSi).
1980
The microstructure of rapidly solidified path a prime candidate alloys following irradiation with Fe and He ions
1981
Optimization of structure and properties of path a prime candidate alloy (PCA) by rapid solidification
1981
Determination of dendritic coherency in solidifying melts by rheological measurements
1993
Crystal fragmentation and columnar-to-equiaxed transitions in Al-Cu studied by synchrotron X-ray video microscopy
2006
Segregation of particles and its influence on the morphology of the eutectic silicon phase in Al–7wt.% Si alloys
2005
Columnar to equiaxed transition of eutectic in hypoeutectic aluminium–silicon alloys
2002
In operando neutron diffraction study of a commercial graphite/(Ni, Mn, Co) oxide-based multi-component lithium ion battery
2016
The effect of solution heat treatment and quenching rates on mechanical properties and microstructures in AlSiMg foundry alloys
2001
Evidence of metastable phase in Al–Ti–(B) system
1982
An investigation of fusion zone microstructures in electron beam welding of copper–stainless steel
2006
Dendrite coherency during equiaxed solidification in binary aluminum alloys
1995
Analytical modelling of equiaxed solidification
1998
Relation between grain size and coherency parameters in aluminium alloys
1995
On the assumption of an additive effect of solute elements in dendrite growth
1997
Hardness and wear of hot-pressed Fe-Cr-Mo-C-Si amorphous alloy powders.
1988
Origin of the low carrier lifetime edge zone in multicrystalline PV silicon
2008
Development of strength in solidifying aluminium alloys
1997
Distribution of iron in multicrystalline silicon ingots
2008