Standout Papers
Citation Impact
Citing Papers
Fatigue crack propagation behavior of friction stir welded 5083-H32 and 6061-T651 aluminum alloys
2007
Friction Stir Welding Studies on Mild Steel
2003
Material flow and microstructural evolution during friction stir spot welding of AZ31 magnesium alloy
2012
EBSD study of underwater friction stir welded AA7003-T4 and AA6060-T4 dissimilar joint
2020
Numerical Simulation of Material Strength Deterioration due to Pitting Corrosion
2014
Analysis of microstructural evolution during friction stir welding of ultrahigh-strength steel
2010
High-Strengthening of Mg–5.5 mass%Y–4.3 mass%Zn Cast Alloy by Friction Stir Processing
2005
The conflicts between strength and toughness
2011 Standout
Strategies for improving the sustainability of structural metals
2019 StandoutNature
Bioinspired structural materials
2014 Standout
3D printing of high-strength aluminium alloys
2017 StandoutNature
Laser material processing
2011 Standout
Deformation and activation volumes of cryomilled ultrafine-grained aluminum
2004
Residual stress measurements in a thick, dissimilar aluminum alloy friction stir weld
2006
Microstructure evolution and fatigue behavior of 2124 aluminum processed by ECAE with back pressure
2006
Evolution of microstructure and mechanical properties in naturally aged 7050 and 7075 Al friction stir welds
2009
Analysis of local microstructure and hardness of 13 mm gauge 2024-T351 AA friction stir welds
2007
Effect of Friction Stir Processing on Microstructure and Mechanical Properties of a Cast-Magnesium–Rare Earth Alloy
2009
Overview no. 102 Theory assisted design of high strength low alloy aluminum
1993
Microstructure, tensile and fatigue properties of AA6061/20vol.%Al2O3p friction stir welded joints
2006
Microstructure and Mechanical Properties of Hybrid Laser-Friction Stir Welding between AA6061-T6 Al Alloy and AZ31 Mg Alloy
2011
Microstructure and mechanical property studies of AA6056 friction stir welded plate
2007
Laser peening and shot peening effects on fatigue life and surface roughness of friction stir welded 7075‐T7351 aluminum
2007
Friction stir welded structural materials: beyond Al-alloys
2011
Quantifying crystallographic texture in the probe-dominated region of thick-section friction-stir-welded aluminium
2008
Microstructure Evolution during Friction Stir Welding of Mill-Annealed Ti-6Al-4V
2010
Optimization of process parameters for friction stir processing (FSP) of Al–TiC in situ composite
2014
A model for predicting fracture mode and toughness in 7000 series aluminium alloys
2004
Design of the friction stir welding tool using the continuum based FEM model
2005
Perspective on hetero-deformation induced (HDI) hardening and back stress
2019 Standout
Effect of an Al filler material on interfacial microstructure and mechanical properties of dissimilar friction stir welded Ti/Mg joint
2019
Influence of heat input on post weld microstructure and mechanical properties of friction stir welded HSLA-65 steel
2012
Influences of post-weld heat treatment on tensile properties of friction stir-welded AA6061 aluminum alloy joints
2007
Stability of nugget zone grain structures in high strength Al-alloy friction stir welds during solution treatment
2003
The strength of friction stir welded and friction stir processed aluminium alloys
2007
Using high-pressure torsion for metal processing: Fundamentals and applications
2008 Standout
Banded microstructure in AA2024-T351 and AA2524-T351 aluminum friction stir welds
2003
Application of modern aluminum alloys to aircraft
1996
In-situ grain structure and texture evolution during friction stir welding of austenite stainless steel
2016
Recent Developments in Friction Stir Welding of Al-alloys
2014
High strain rate superplasticity in friction stir processed Al–Mg–Zr alloy
2003
Fatigue behavior of a 7075-T6 aluminum alloy coated with an electroless Ni–P deposit
2006
Microstructure and mechanical behavior of friction stir processed ultrafine grained Al–Mg–Sc alloy
2011
Recrystallization mechanisms in 5251 H14 and 5251 O aluminum friction stir welds
2006
Texture variations in an aluminum friction stir weld
2007
Microstructure and mechanical properties of friction stir processed AISI 316L stainless steel
2014
Effect of tool dimensions and parameters on the microstructure of friction stir welded aluminum 7449 alloy of various thicknesses
2016
An assessment of microstructure, hardness, tensile and impact strength of friction stir welded ferritic stainless steel joints
2010
Friction stir processing of large-area bulk UFG aluminum alloys
2004
Microstructural Evolution of Cast Mg-Al-Ca Alloy during Friction Stir Processing
2007
Texture development in near-α Ti friction stir welds
2010
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Fatigue properties of friction stir welded particulate reinforced aluminium matrix composites
2009
Parametric finite element analysis of stress evolution during friction stir welding
2006
Infrared thermography (IRT) applications for building diagnostics: A review
2014 Standout
Development of microstructure and texture during single and multiple pass friction stir processing of a strain hardenable aluminium alloy
2018
Recovery retardation in equal channel angular pressed Al–Zr alloy during friction stir welding
2002
Effects of ball milling and particle size on microstructure and properties 5083 Al–Ni composites fabricated by friction stir processing
2015
Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy
2013 Standout
Development of ultrafine-grained microstructure and low temperature (0.48 Tm) superplasticity in friction stir processed Al–Mg–Zr
2005
Basal plane texture and flow pattern in friction stir weld of a magnesium alloy
2003
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
Friction stir welding of lap joints: Influence of process parameters on the metallurgical and mechanical properties
2009
On the correlation between indentation hardness and tensile strength in friction stir processed materials
2020
Friction stir additive manufacturing for high structural performance through microstructural control in an Mg based WE43 alloy
2014
Friction stir welding of titanium alloys: A review
2017
Corrosion–fatigue crack growth in friction stir welded Al 7050
2001
Progress in structural materials for aerospace systems11The Golden Jubilee Issue—Selected topics in Materials Science and Engineering: Past, Present and Future, edited by S. Suresh.
2003 Standout
On the role of microstructure in governing fracture behavior of an aluminum–copper–lithium alloy
2013
Dissimilar friction stir welds in AA5083–AA6082: The effect of process parameters on residual stress
2006
Strain rate dependence of properties of cryomilled bimodal 5083 Al alloys
2006
Microstructural investigation of friction stir welded 7050-T651 aluminium
2003 Standout
Microstructure and mechanical properties of friction stir welded SAF 2507 super duplex stainless steel
2005
Artificial intelligence, machine learning and deep learning in advanced robotics, a review
2023 Standout
Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD
2010 Standout
Dynamic recrystallization phenomena during laser-assisted friction stir processing of a precipitation hardened nickel base superalloy
2016
High strain rate superplasticity in a commercial 2024 Al alloy via friction stir processing
2003
A microtexture investigation of recrystallization during friction stir processing of as-cast NiAl bronze
2006
Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir welds
2003
Transformation and Deformation Texture Study in Friction Stir Processed API X80 Pipeline Steel
2012
Effect of friction stir processing (FSP) on microstructure and properties of Al–TiC in situ composite
2011
Electroless nickel, alloy, composite and nano coatings – A critical review
2013 Standout
The Evolution of Al-Li Base Products for Aerospace and Space Applications
2012
Microstructural studies of friction stir welds in 2024-T3 aluminum
2002
Effects of tool rotation and pin diameter on fatigue properties of friction stir welded lap joints
2006
Effects of graphene nano-platelets (GNPs) on the microstructural characteristics and textural development of an Al-Mg alloy during friction-stir processing
2017
Mechanical behavior of nanocrystalline metals and alloys11The Golden Jubilee Issue—Selected topics in Materials Science and Engineering: Past, Present and Future, edited by S. Suresh
2003 Standout
Development of grain structure during friction stir welding
2004
Exfoliation corrosion of friction stir welded dissimilar 2024-to-7075 aluminum alloys
2018
The effect of excimer laser surface treatment on the pitting corrosion fatigue behaviour of aluminium alloy 7075
2003
Prediction of Pitting Corrosion Characteristics using Artificial Neural Networks
2012
Strain Rate Sensitivity, Work Hardening, and Fracture Behavior of an Al-Mg TiO2 Nanocomposite Prepared by Friction Stir Processing
2014
Friction Stir Welding – Recent Developments in Tool and Process Technologies
2003
Fatigue crack propagation behavior of friction stir welded 5083-H32 Al alloy
2007
Microstructure evolution and mechanical properties of friction stir welded dissimilar joints of Mg–Zn–Gd and Mg–Al–Zn alloys
2016
Recent Development in Friction Stir Welding Process: A Review
2020
Banded microstructure in 2024-T351 and 2524-T351 aluminum friction stir welds
2003
Material Flow during Friction Stir Welding of HSLA 65 Steel
2013
Recent advances in friction-stir welding – Process, weldment structure and properties
2008 Standout
Dynamics of Phononic Materials and Structures: Historical Origins, Recent Progress, and Future Outlook
2014 Standout
A review of dynamic recrystallization phenomena in metallic materials
2016 Standout
Microstructure and Texture Evolution during Friction Stir Processing of Fully Lamellar Ti-6Al-4V
2010
Friction Stir Processing Technology: A Review
2008 Standout
Microstructure evolution and texture development in a friction stir-processed AISI D2 tool steel
2014
Reactive friction-stir processing of nanocomposites: Effects of thermal history on microstructure–mechanical property relationships
2017
Effect of welding parameters on microstructure and mechanical properties of friction stir welded joints of a super high strength Al–Zn–Mg–Cu aluminum alloy
2014
Mechanisms of fatigue crack propagation in metals, ceramics and composites: Role of crack tip shielding
1988
Recent developments in advanced aircraft aluminium alloys
2013 Standout
Interfacial Reaction during Friction Stir Welding of Al and Cu
2011
Effect of oxide array on the fatigue property of friction stir welds
2006
Friction stir processing of a metastable β titanium alloy in β and α+β phase fields
2019
Self-healing polymeric materials: A review of recent developments
2008 Standout
Influence of CNTs decomposition during reactive friction‐stir processing of an Al–Mg alloy on the correlation between microstructural characteristics and microtextural components
2018
Precipitation and grain refinement in a 2195 Al friction stir weld
2006
The effect of welding parameters on the corrosion behaviour of friction stir welded AA2024–T351
2006
Constitutional liquation during dissimilar friction stir welding of Al and Mg alloys
2004
Modelling of pitting corrosion in marine and offshore steel structures – A technical review
2015 Standout
Parameters controlling microstructure and hardness during friction-stir welding of precipitation-hardenable aluminum alloy 6063
2002
Mechanical properties of alloys consisting of two ductile phases
2006
Effect of kissing bond on fatigue behavior of friction stir welds on Al 5083 alloy
2006
On the formation of grain structure during friction stir welding of duplex stainless steel
2010
Enhancement of mechanical and tribological properties of SiC- and CB-reinforced aluminium 7075 hybrid composites through friction stir processing
2017
In-situ material flow pattern around probe during friction stir welding of austenitic stainless steel
2016
Feasibility study of friction stir welding of 6061-T6 aluminium alloy with AISI 1018 steel
2004
Recent Development in Friction Stir Processing as a Solid-State Grain Refinement Technique: Microstructural Evolution and Property Enhancement
2019
The joint properties of copper by friction stir welding
2003
Dissimilar friction stir welds in AA5083-AA6082. Part II: Process parameter effects on microstructure
2006
Synthesis and mechanical behavior of nanostructured materials via cryomilling
2005
Friction stir welding and processing
2005 Standout
Microstructural characterisation of stir zone containing residual ferrite in friction stir welded 304 austenitic stainless steel
2005
Modeling strain hardening and texture evolution in friction stir welding of stainless steel
2005
Influence of martensite content and morphology on tensile and impact properties of high-martensite dual-phase steels
1999
Superplastic Forming of Multipass Friction Stir Processed Aluminum-Magnesium Alloy
2014
Clarification of microstructure evolution of aluminum during friction stir welding using liquid CO2 rapid cooling
2017
Transformation Toughening in Zirconia‐Containing Ceramics
2000 Standout
Perspectives on Titanium Science and Technology
2013 Standout
Friction Stir Processing of Investment-Cast Ti-6Al-4V: Microstructure and Properties
2007
In situ Al3Ti and Al2O3 nanoparticles reinforced Al composites produced by friction stir processing in an Al-TiO2 system
2011
Characterization of a friction-stir-welded aluminum alloy 6013
2002
Evaluation of the microstructure and wear behaviour of AA6063-B4C/TiB2 mono and hybrid composite layers produced by friction stir processing
2015
Microstructure evolution and mechanical properties of a submerged friction-stir-processed AZ91 magnesium alloy
2015
Superplastic behaviour of friction stir processed AZ91 magnesium alloy produced by high pressure die cast
2006
Microstructural factors governing hardness in friction-stir welds of solid-solution-hardened Al alloys
2001
Hall–Petch relationship in friction stir welds of equal channel angular-pressed aluminium alloys
2003
Microstructure evolution during friction-stir welding of AZ31 magnesium alloy
2015
Improvement of damping properties in laser processed superelastic Cu-Al-Mn shape memory alloys
2016 Standout
Corrosion of a dissimilar friction stir weld joining aluminium alloys AA2024 and AA7010
2006
Effect of niobium interlayer in dissimilar friction stir welding of aluminum to titanium
2018
Rapid formation of the sigma phase in 304 stainless steel during friction stir welding
2003
Effect of friction stir processing on fatigue behavior of an investment cast Al–7Si–0.6 Mg alloy
2009
Residual stress effects on near-threshold fatigue crack growth in friction stir welds in aerospace alloys
2003
Microstructural evolution during friction stir-processing of pure iron
2008
Microstructural evolution of aluminum alloy during friction stir welding under different tool rotation rates and cooling conditions
2018
Mechanical behavior of a cryomilled nanostructured Al-7.5 pct Mg alloy
2004
Magnesium and its alloys applications in automotive industry
2007 Standout
Mechanical properties of an ultrafine-grained Al-7.5 Pct Mg alloy
2003
A Study of Residual Stresses and Microstructure in 2024-T3 Aluminum Friction Stir Butt Welds
2002
Friction stir welding of a P/M Al–Al2O3 nanocomposite: Microstructure and mechanical properties
2013
Recrystallization in type 304L stainless steel during friction stirring
2004
Prospects of laser beam welding and friction stir welding processes for aluminum airframe structural applications
2018
Effect of friction stir processing on the kinetics of superplastic deformation in an Al-Mg-Zr alloy
2005
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Microstructure and mechanical properties of a friction stir processed Ti–6Al–4V alloy
2013
Superplastic deformation behaviour of friction stir processed 7075Al alloy
2002
Texture development in the stir zone of near-α titanium friction stir welds
2009
Friction stir welding of aluminium alloys
2009 Standout
Friction-stir welding of a ductile high entropy alloy: microstructural evolution and weld strength
2017
Friction Stir Welding of Al-Cu Bilayer Sheet by Tapered Threaded Pin: Microstructure, Material Flow, and Fracture Behavior
2015
Investigations on temperature distribution, microstructure evolution, and property variations along thickness in friction stir welded joints for thick AA7075-T6 plates
2015
Effect of friction stir welding on microstructure, tensile and fatigue properties of the AA7005/10 vol.%Al2O3 composite
2006
Effect of Welding Temperature on Microstructure of Friction-stir Welded Aluminum Alloy 1050
2014
Microstructure Evolution during Friction Stir Welding of Aluminum Alloy AA2219
2010
Effect of friction stir processing on fatigue behavior of A356 alloy
2004
Principles of equal-channel angular pressing as a processing tool for grain refinement
2006 Standout
The microstructure and strength properties of MA957 nanostructured ferritic alloy joints produced by friction stir and electro-spark deposition welding
2007
Grain refinement of aluminum alloys by friction stir processing
2006
Experimental simulation of recrystallized microstructure in friction stir welded Al alloy using a plane-strain compression test
2007
Influence of cooling conditions on joint properties and microstructures of aluminum and magnesium dissimilar alloys by friction stir welding
2015
Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals
2016 Standout
Fabrication of a high strength ultra-fine grained Al-Mg-SiC nanocomposite by multi-step friction-stir processing
2017
Grain structure formation during friction stir welding observed by the ‘stop action technique’
2005
FEM modeling of ultrasonic vibrothermography of a damaged plate and qualitative study of heating mechanisms
2013
Residual stress and its role in failure
2007 Standout
CDRX modelling in friction stir welding of AA7075-T6 aluminum alloy: Analytical approaches
2007
Dynamic restoration and crystallographic texture of a friction-stir processed Al–Mg–SiC surface nanocomposite
2018
Evaluation of microstructure and superplasticity in friction stir processed 5083 Al alloy
2004
The effect of tensioning and sectioning on residual stresses in aluminium AA7749 friction stir welds
2008
Friction stir welding of 2060–T8 Al Li alloy. Part I: Microstructure evolution mechanism and mechanical properties
2020
Recent Developments in Irradiation-Resistant Steels
2008 Standout
Effect of welding parameters on nugget zone microstructure and properties in high strength aluminium alloy friction stir welds
2003
Deformation behavior of bimodal nanostructured 5083 Al alloys
2005
Influence of base metal microstructure on microstructural development in aluminium based alloy friction stir welds
2007
Recrystallization mechanisms during friction stir welding/processing of aluminum alloys
2007
Study of friction stir welding of 01420 aluminum–lithium alloy
2006
Monte Carlo simulation of grain refinement during friction stir processing
2020
Effect of stacking fault energy on the restoration mechanisms and mechanical properties of friction stir welded copper alloys
2018
Effects of stored strain energy on restoration mechanisms and texture components in an aluminum–magnesium alloy prepared by friction stir processing
2015
Microstructure evolution during FSW/FSP of high strength aluminum alloys
2005
Evolution of Microstructure and Crystallographic Texture During Dissimilar Friction Stir Welding of Duplex Stainless Steel to Low Carbon-Manganese Structural Steel
2018
The metallurgy and processing science of metal additive manufacturing
2016 Standout
Microstructural Characterization of Friction Stir Welded Aluminum-Steel Joints
2016
FIB-assisted TEM study of an oxide array in the root of a friction stir welded aluminium alloy
2003
Texture in friction stir welds of Timetal 21S
2004
Laser and shot peening effects on fatigue crack growth in friction stir welded 7075-T7351 aluminum alloy joints
2006
Controlling sound with acoustic metamaterials
2016 Standout
Crystallographic Texture in the Friction-Stir-Welded Metal Matrix Composite Al6061 with 10 Vol Pct Al2O3
2009
Texture development in friction stir welds
2011
High-Speed Friction Stir Welding of AA7075-T6 Sheet: Microstructure, Mechanical Properties, Micro-texture, and Thermal History
2017
Distribution of tensile property and microstructure in friction stir weld of 6063 aluminum
2001
Development of nanocrystalline structure in Cu during friction stir processing (FSP)
2011
A look in the corrosion of aluminum alloy friction stir welds
2007
Effect of welding parameters on mechanical and microstructural properties of AA6056 joints produced by Friction Stir Welding
2006
Structural response of superaustenitic stainless steel to friction stir welding
2011
Grain structure and texture evolution during friction stir welding of thin 6016 aluminum alloy sheets
2009
A multiscale methodology for deformation modeling applied to friction stir welded steel
2006
Microstructural properties of friction stir welded and post-weld heat-treated 7449 aluminium alloy thick plate
2007
Stress corrosion cracking susceptibility of friction stir welded AA7075–AA6056 dissimilar joint
2004
Works of Kumar V. Jata being referenced
The influence of Mn dispersoid content and stress state on ductile fracture of 2134 type Al alloys
1989
Continuous dynamic recrystallization during friction stir welding of high strength aluminum alloys
2000 Standout
Friction Stir Welding of High Strength Aluminum Alloys
2000
The influence of artificial aging on the microstructure, mechanical properties, corrosion, and environmental cracking susceptibility of a 7075 friction‐stir‐weld
2007
A cast 7050 friction stir weld with scandium: microstructure, corrosion and environmental assisted cracking
2006
On exfoliation corrosion of alloy 2060 T8E30 in an aggressive acid environment
2015
The effect of phase continuity on the fatigue and crack closure behavior of a dual-phase steel
1987
Development of nondestructive non-contact acousto-thermal evaluation technique for damage detection in materials
2012
Effect of fabrication and microstructure on the fracture initiation and growth toughness of Al–Li–Cu alloys
1998
Heterogeneity of crystallographic texture in friction stir welds of aluminum
2001
Plastic flow and fracture behavior of an Al-Ti-Cu nanocomposite
2001
Structure, properties and fracture of friction stir welds in a high-temperature Al-8.5Fe-1.3V–1.7Si alloy (AA-8009)
2006
The Anisotropy and Texture of Al-Li Alloys
1996
Effects of pitting corrosion on the fatigue behavior of aluminum alloy 7075-T6: modeling and experimental studies
2001
Failure modes during equal channel angular extrusion of aluminum alloy 2024
2001
An experimental investigation of guided wave propagation in corrugated plates showing stop bands and pass bands
2006
Fatigue crack growth and fracture toughness behavior of an Al-Li-Cu alloy
1986
Friction-stir welding effects on microstructure and fatigue of aluminum alloy 7050-T7451
2000