Citation Impact
Citing Papers
Fundamentals and advances in magnesium alloy corrosion
2017 Standout
The normalized coffin- manson plot in terms of a new damage function based on grain boundary cavitation under creep- fatigue condition
1996
Twinning-related grain boundary engineering
2004 Standout
Advancing dental implant surface technology – From micron- to nanotopography
2008 Standout
Increased osteoblast adhesion on nanophase metals: Ti, Ti6Al4V, and CoCrMo
2004
Biodegradable magnesium alloys for orthopaedic applications: A review on corrosion, biocompatibility and surface modifications
2016
Magnesium and its alloys as orthopedic biomaterials: A review
2005 Standout
In vitro biocompatibility assessment of a nickel-titanium alloy using electron microscopyin situ end-labeling (EM-ISEL)
1998
A review on the wettability of dental implant surfaces II: Biological and clinical aspects
2014 Standout
Fluoride modification effects on osteoblast behavior and bone formation at TiO2 grit-blasted c.p. titanium endosseous implants
2005
Formation of highly adherent nano-porous alumina on Ti-based substrates: a novel bone implant coating
2004
Corrosion resistance, surface mechanical properties, and cytocompatibility of plasma immersion ion implantation–treated nickel‐titanium shape memory alloys
2005
Surface treatments of titanium dental implants for rapid osseointegration
2006 Standout
Nanotextured titanium surfaces for enhancing skin growth on transcutaneous osseointegrated devices
2009
Advances in dental implant materials and tissue regeneration
2006
Enhancement in corrosion resistance of austenitic stainless steels by surface alloying with nitrogen and carbon
2005
A review on fundamentals for designing oxygen evolution electrocatalysts
2020 Standout
Recent developments in stainless steels
2009 Standout
A correlation between creep-fatigue life and tensile hold time for austenitic stainless steels
1994
Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
2008 Standout
Analysis of the hysteresis loop in stainless steels II. Austenitic–ferritic duplex steel and the effect of nitrogen
2001
Glow-discharge nitriding of sintered stainless steels
2001
Mechanical characterization of anti-infectious, anti-allergic, and bioactive coatings on orthopedic implant surfaces
2009
Intensified plasma-assisted nitriding of AISI 316L stainless steel
2002
Cemented carbide microstructures: a review
2018 Standout
On the use of SRIM for computing radiation damage exposure
2013 Standout
Engineered surfaces for automotive engine and power train components
2015
Mechanical properties of nanocrystalline materials
2005 Standout
Stress dependence on stress relaxation creep rate during tensile holding under creep-fatigue interaction in 1Cr-Mo-V steel
1999
X-ray diffraction characterisation of low temperature plasma nitrided austenitic stainless steels
1999
Correlation between characteristics of grain boundary carbides and creep–fatigue properties in AISI 321 stainless steel
2003
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
Low temperature plasma nitrocarburising of AISI 316 austenitic stainless steel
2004
Effects of nitrogen on low-cycle fatigue properties of type 304L austenitic stainless steels tested with and without tensile strain hold
2002
Improvement of creep-fatigue life by the modification of carbide characteristics through grain boundary serration in an AISI 304 stainless steel
2003
Electroless nickel, alloy, composite and nano coatings – A critical review
2013 Standout
Architecture of PVD coatings for metalcutting applications: A review
2014
Effect of treatment time on low temperature plasma nitriding of stainless steel by saddle field neutral fast atom beam source
2006
The wear and corrosion properties of stainless steel nitrided by low-pressure plasma-arc source ion nitriding at low temperatures
2000
Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments
2022 Standout
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
2004 Standout
Thermal stability of carbon S phase in 316 stainless steel
2002
Assessment of damage and life prediction of austenitic stainless steel under high temperature creep–fatigue interaction condition
2002
Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging
2011 Standout
The nature of expanded austenite
2000
Corrosion resistance of the layers formed on the surface of plasma-nitrided AISI 304L steel
2006
Anisotropic strain in nitrided austenitic stainless steel
2000
Controlled dissolution of colossal quantities of nitrogen in stainless steel
2006
Plasma assisted ignition and combustion
2006 Standout
Corrosion behaviour assessment of cast and HIPed Stellite 6 alloy in a chloride-containing environment
2013
Calcium Phosphate Bioceramics: A Review of Their History, Structure, Properties, Coating Technologies and Biomedical Applications
2017 Standout
Microstructural and Corrosion Evaluation of Laser Surface Nitrided Ti-13Nb-13Zr Alloy
2004
Electrophoretic deposition of biomaterials
2010 Standout
Experimental studies on selective laser melting of metallic parts
2008
Structural characterisation of hardening of Ti–Al–V alloys after nitridation by plasma immersion ion implantation
2001
Activation processes of stress relaxation during hold time in 1Cr–Mo–V steel
1999
Low temperature gaseous nitriding and carburising of stainless steel
2005
Investigation of the effect of the types and densities of grain boundary carbides on grain boundary cavitation resistance of AISI 321 stainless steel under creep–fatigue interaction
2003
The metastable m phase layer on ion-nitrided austenitic stainless steels
1999
Hydrogen Effect on Nitriding Process of 304L Austenitic Stainless Steel
2006
Characteristics of a plasma electrolytic nitrocarburising treatment for stainless steels
2001
Life extension by cavity annihilation heat treatment in AISI 316 stainless steel under creep-fatigue interaction conditions
2000
Average atomic-displacement energies of cubic metals
1981
Microstructural characterization of plasma nitrided austenitic stainless steel
2000
Metallic implant biomaterials
2014 Standout
Low temperature plasma carburising of austenitic stainless steels for improved wear and corrosion resistance
1999
Study of the S phase formed on plasma-nitrided AISI 316L stainless steel
2006
A low‐cycle fatigue life prediction model of ultrafine‐grained metals
2002
Methane Dissociation in Pulsed dc Discharges at High Reduced Electric Field
2004
Glow-discharge nitriding of AISI 316L austenitic stainless steel: influence of treatment time
2004
The effect of post weld heat treatment on the creep-fatigue behavior of gas tungsten arc welded 308L stainless steel
2006
Correlation of the M23C6 precipitation morphology with grain boundary characteristics in austenitic stainless steel
2001
The occurrence of grain boundary serration and its effect on the M23C6 carbide characteristics in an AISI 316 stainless steel
2002
Low temperature plasma nitriding of 316 stainless steel by a saddle field fast atom beam source
2005
Surface treatment selections for automotive applications
2005
Protective coatings on magnesium and its alloys — a critical review
2002 Standout
Electron-irradiation-induced crystalline-to-amorphous transition in β-SiC single crystals
1992 StandoutNobel
Industrial Applications of Pulsed Power Technology
2007 Standout
Steel: The Resurrection of a Forgotten Water-Splitting Catalyst
2018
Effects of tantalum ion implantation on the corrosion behavior of AZ31 magnesium alloys
2006
Global energy consumption due to friction in passenger cars
2011 Standout
Influence of tribology on global energy consumption, costs and emissions
2017 Standout
Comparison studies on properties of nitrogen and carbon S phase on low temperature plasma alloyed AISI 316 stainless steel
2002
The ordering and disordering of solid solutions under irradiation
1979
Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
2012 Standout
Works of K.‐T. Rie being referenced
Cytocompatibility of Ti-6Al-4V and Ti-5Al-2.5Fe alloys according to three surface treatments, using human fibroblasts and osteoblasts
1996
Determination of the Average Number of Replacement Collisions in an Electron‐Irradiated F.C.C. Crystal (Ni3Mn)
1968
Plasma diffusion treatment of stellite
1995
Plasma-CVD of TiCN and ZrCN films on light metals
1999
Plasma Deposition, Plasma Coating, and Ion Implantation to Improve Metallic Implants and Prostheses
2000
Structure and properties of plasma-nitrided stainless steel
1995
Abscheidung von Hartstoffschichten des Typs (B,C,N) bei niedrigen Beschichtungstemperaturen im PACVD‐Prozeß
1994
Further investigation of the structure and properties of austenitic stainless steel after plasma nitriding
1999
Evaluation of the corrosion behaviour of wear-resistant PACVD coatings
1999
Creep-fatigue life prediction in terms of nucleation and growth of fatigue crack and creep cavities
1988
A model for life prediction in low-cycle fatigue with hold time
1985
Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials—3
1992
Optimization and control of a plasma carburizing process by means of optical emission spectroscopy
1998
Plasma surface treatment and PACVD on Ti alloys for surgical implants
1995
Plasma nitrided austenitic stainless steels for automotive hydrogen applications
2008
NEW APPROACH FOR ESTIMATION OF ΔJ AND FOR MEASUREMENT OF CRACK GROWTH AT ELEVATED TEMPERATURE
1996
Improvement of the mechanical properties of austenitic stainless steel after plasma nitriding
2000
Plasma-assisted boriding of industrial components in a pulsed d.c. glow discharge
1999
Mechanical properties of TiN/TiB2 multilayers deposited by plasma enhanced chemical vapor deposition
2003
Electronic structures and nitride formation on ion-implanted AISI 304L austenitic stainless steel
1999