Citation Impact
Citing Papers
Intraoral determination of the tolerance of dentists for perceptibility and acceptability of shade mismatch
2007 Standout
Mechanical properties of resin-ceramic CAD/CAM restorative materials
2015 Standout
Effect of filler particle size and morphology on force/work parameters for stickiness of unset resin-composites
2009
Dental materials: 1996 literature review. Part 2
1998
Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins
2002 Standout
Rheological properties of resin composites according to variations in monomer and filler composition
2005
Seventeen‐Year Clinical Study of Ultraviolet‐Cured Posterior Composite Class I and II Restorations
1999
Physical and chemical properties of a new root-end filling material
1995 Standout
Tooth structure removal associated with various preparation designs for anterior teeth
2002 Standout
Bisphenol A and human health: A review of the literature
2013 Standout
Using Mineral Trioxide Aggregate as a Pulp-Capping Material
1996
Clinical applications of mineral trioxide aggregate
1999 Standout
Occlusal Caries: Biological Approach for Its Diagnosis and Management
2016 Standout
Current ceramic materials and systems with clinical recommendations: A systematic review
2007 Standout
Rheologic properties of flowable, conventional hybrid, and condensable composite resins
2003
Water sorption/solubility of dental adhesive resins
2006 Standout
An application of nanotechnology in advanced dental materials
2003 Standout
Mineral Trioxide Aggregate: A Comprehensive Literature Review—Part III: Clinical Applications, Drawbacks, and Mechanism of Action
2010 Standout
Properties and applications of calcium hydroxide in endodontics and dental traumatology
2011 Standout
Comparative investigation of marginal adaptation of mineral trioxide aggregate and other commonly used root-end filling materials
1995
Two-year clinical performance of a nanofiller vs a fine-particle hybrid resin composite
2006
Rheological properties of flowable resin composites and pit and fissure sealants
2007
A five-year clinical evaluation of Class II composite resin restorations
2000
Investigating filler morphology and mechanical properties of new low-shrinkage resin composite types
2010
Resin-ceramic bonding: A review of the literature
2003 Standout
Slumping resistance and viscoelasticity prior to setting of dental composites
2008
The clinical performance of adhesives
1998 Standout
Three-year occlusal wear of posterior composite restorations
1992
Resin composite—State of the art
2010 Standout
Semi-Quantitative Analysis of Early Microleakage around Amalgam Restorations by Fluorescent Spectrum Method: A Laboratory Study
1992
Ceramics in dentistry: Historical roots and current perspectives
1996 Standout
Color stability of new-generation indirect resins for prosthodontic application
2000
THE SPECTRUM OF COMPOSITES:NEW TECHNIQUES AND MATERIALS
2000
Hygroscopic and hydrolytic effects in dental polymer networks
2005 Standout
Evaluation of dental restorative composites containing polyhedral oligomeric silsesquioxane methacrylate
2004
Systematic review of the chemical composition of contemporary dental adhesives
2007 Standout
Mechanical properties of heat treated restorative resins for use in the inlay/onlay technique
1990
Effect of air polishing on the fluoride release of (resin-modified) glass ionomer cements and of a polyacid-modified composite resin
1998
Class II composite restorations with metallic and translucent matrices: 2-year follow-up findings
2006
Physicochemical Basis of the Biologic Properties of Mineral Trioxide Aggregate
2005 Standout
Is the wear of dental composites still a clinical concern?
2006
Dental caries
2017 Standout
Matrix Metalloproteinases and Other Matrix Proteinases in Relation to Cariology: The Era of ‘Dentin Degradomics'
2015 Standout
Cytotoxicity of 35 dental resin composite monomers/additives in permanent 3T3 and three human primary fibroblast cultures
1998 Standout
An alternative method to reduce polymerization shrinkage in direct posterior composite restorations
2002
Filler features and their effects on wear and degree of conversion of particulate dental resin composites
2005
Antibacterial activity of dental composites containing quaternary ammonium polyethylenimine nanoparticles against Streptococcus mutans
2006 Standout
Thermocycling and dwell times in microleakage evaluation for bonded restorations
1995
Post Placement and Restoration of Endodontically Treated Teeth: A Literature Review
2004 Standout
Comparison of the color stability of ten new-generation composites: An in vitro study
1994
Light intensity effects on resin-composite degree of conversion and shrinkage strain
2000 Standout
The long-term effect of a composite resin restoration on proximal contact tightness
2006
Progress in dimethacrylate-based dental composite technology and curing efficiency
2012 Standout
The effect of thermocycling on microleakage of several commercially available composite Class V restorations in vitro
2003
Resin restorations: leakage, bacteria, pulp
1993
Considerations in measurement of marginal fit
1989 Standout
Slumping tendency and rheological properties of flowable composites
2010
Fatigue testing and microscopic evaluation of post and core restorations under artificial crowns
1999
Novel-design ultra-thin CAD/CAM composite resin and ceramic occlusal veneers for the treatment of severe dental erosion
2011
Characterization of nanofilled compared to universal and microfilled composites
2006
Comparative study of the wear behavior of composites for posterior restorations
2007
Clinical performance of a packable resin composite for posterior teeth after 3 years
2001
Clinical challenges and the relevance of materials testing for posterior composite restorations
2004
Factors involved in the development of polymerization shrinkage stress in resin-composites: A systematic review
2005 Standout
Relationship between bond-strength tests and clinical outcomes
2009 Standout
Influence of food-simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials
2004 Standout
Thermal cycling procedures for laboratory testing of dental restorations
1999 Standout
The influence of postcuring on the fracture properties of photo‐cured dimethacrylate based dental composite resin
1987
Dental adhesion review: Aging and stability of the bonded interface
2007 Standout
Class II composite resin restorations with two polymerization techniques: relationship between microtensile bond strength and marginal leakage
2005
Fabrication and evaluation of Bis-GMA/TEGDMA dental resins/composites containing halloysite nanotubes
2012
Porcelain veneers: a review of the literature
2000
Radiographic detection of recurrent carious lesions associated with composite restorations
1990
Review on fluoride-releasing restorative materials—Fluoride release and uptake characteristics, antibacterial activity and influence on caries formation
2006 Standout
Dental luting agents: A review of the current literature
1998 Standout
State of the art etch-and-rinse adhesives
2010 Standout
Resin composites in dentistry: the monomer systems
1997 Standout
Properties of Packable Dental Composites
2000
Flexural creep deformation and recovery in dental composites
2001
Biocompatibility of dental materials used in contemporary endodontic therapy: a review. Part 1. Intracanal drugs and substances
2003
Longevity of posterior composite restorations: Not only a matter of materials
2011 Standout
Orthodontic biomaterials: from the past to the present.
2002
An accelerated test for color stability of restorative resins
1981
Wear and Microhardness of Glass-Ionomer Cements
1987
The effect of thermocycling in microleakage analysis
1992
Factors Affecting the Color Stability of Restorative Resins
1983
Direct composite resin fillings versus amalgam fillings for permanent or adult posterior teeth
2014
Relation of Dental Composite Formulations To Their Degradation and the Release of Hydrolyzed Polymeric-Resin-Derived Products
2001
Influence of food-simulating solvents on resin composites and glass-ionomer restorative cement
1989
Degradation of Glass Filler in Experimental Composites
1981
Relationship between abrasive wear and microstructure of composite resins
1978
Remaining methacrylate groups in composite restorative materials
1978
Colour stability and visual perception of dimethacrylate based dental composite resins
1985
Biocompatibility of Resin-Modified Filling Materials
2000
Longevity of Posterior Composite Restorations
2014 Standout
Report of the Committee on Scientific Investigation of the American Academy of Restorative Dentistry
1992
Water and Abrasive Effects on Three-body Wear of Composites
1991
Four-year Water Degradation of Total-etch Adhesives Bonded to Dentin
2003 Standout
Effect of temperature and duration of post‐cure on selected mechanical properties of resin composites containing carboxylic anhydrides
1992
Restorative resins: hardness and strength vs. quantity of remaining double bonds
1982
In vitro color change of composite-based resins
1989
Effect of Abrasion Medium on Wear of Stress-bearing Composites and Amalgam in vitro
1986
Dental adhesives of the future.
2002
Conversion of one-step to two-step self-etch adhesives for improved efficacy and extended application.
2005
Fracture toughness and acoustic emission behavior of dental composite resins
1991
Have dentin adhesives become too hydrophilic?
2003
Selection of restorative materials in permanent teeth in general dental practice
1999
Evaluation of the marginal integrity of ceramometal restorations: Part II
1984
The relation between salivary properties and in vivo solubility of dental cements
1987
Wear and Marginal Breakdown of Composites with Various Degrees of Cure
1997
Color Stability of Restorative Resins Under Accelerated Aging
1978
Influence of abrasive particle size and contact stress on the wear rate of dental restorative materials
1985
A Critical Review of the Durability of Adhesion to Tooth Tissue: Methods and Results
2005 Standout
The effect of thermal cycling on the fracture toughness of seven composite restorative materials
1989
Composition of Dental Resin and Composite Materials
1981
Composites for use in posterior teeth: Composition and conversion
1987
Clinical evaluation of a posterior composite 10-year report
1999
Current Trends in Dental Composites
1995
Three-year clinical study of UV-cured composite resins in posterior teeth
1983
Water Sorption and Filler Characteristics of Composites for Use in Posterior Teeth
1986
Recent Developments in the Chemistry of Cubic Polyhedral Oligosilsesquioxanes
2010 Standout
Effects of various finishing systems on the surface roughness and staining susceptibility of packable composite resins
2002
Factors affecting the quantity of remaining double bonds in restorative resin polymers
1982
In vivo Degradation of Resin-Dentin Bonds in Humans Over 1 to 3 Years
2000 Standout
Metallic implant biomaterials
2014 Standout
Color Difference Thresholds in Dentistry
2015 Standout
THE CLINICAL PERFORMANCE OF CAD-CAM–GENERATED CERAMIC INLAYS: A FOUR-YEAR STUDY
1996
Halloysite Clay Nanotubes for Loading and Sustained Release of Functional Compounds
2015 Standout
Composites Reinforced in Three Dimensions by Using Low Magnetic Fields
2012 StandoutScience
Hydrolytic Degradation of Dental Composites
1984
Influence of Ketones on Selected Mechanical Properties of Resin Composites
1992
Color stability of dental composite resin materials for crown and bridge veneers
1987 Standout
Strength properties of three zinc phosphate cements mixed to two different consistencies
1989
Clinical effectiveness of direct class II restorations - a meta-analysis.
2012
Influence of Carboxylic Anhydrides on Selected Mechanical Properties of Heat-cured Resin Composites
1991
Works of K.F. Leinfelder being referenced
Effect of silane treatment on wear of a posterior composite resin
1987
One-year clinical evaluation of SureFil packable composite.
1999
A report on a new condensable composite resin.
1998
Proximal wear rates by tooth position of resin composite restorations
1996
Ask the Expert
2001
Ask the Expert
2001
Evaluation of various forms of calcium hydroxide in the monitoring of microleakage
1991
Degradation of microfilled posterior composite
1992
Use of Optical Standards for Determining Wear of Posterior Composite Resins
1990
A Conservative Approach to Placing Posterior Composite Resin Restorations
1996
Five-year clinical study of u.v.-polymerized posterior composites
1991
Pattern of Wear in Posterior Composite Restorations
1977
Effect of particle variation on wear rates of posterior composites.
1995
Age‐hardening and tensile properties of low gold (10–14 kt.) alloys
1981
Microscopic observations of the wear of a tooth restorative composite in vivo
1983
A new copolymerized composite resin system: a multiphased evaluation.
1995
In Situ Replication Techniques: I. Preliminary Screening and the Negative Replication Technique
1977
Use of Ca (OH)2 for measuring microleakage
1986
A new condensable composite for the restoration of posterior teeth.
1998
Five-year clinical investigation of one conventional composite and three microfilled resins in anterior teeth
1988
Wear resistance of resin cements.
1995
Physical Properties of a Nickel-Chromium Alloy for Enamel Veneering
1971
The effect of cold temperature mixing on the properties of zinc phosphate cement.
1976
Effects of an airabrasive polishing system on restored surfaces.
1987
Two-year clinical study of composite resins in posterior teeth
1986
Quantitative wear measurement of posterior composite resins
1986
Three-year study of two light-cured posterior composite resins
1986
The effect of two smear layer cleansers on shear bond strength to dentin
1990
Dentin adhesives for the twenty-first century.
2001
Clinical evaluation of a microleakage test
1987
Current Developments in Posterior Composite Resins
1988
Clinical evaluation of composite resins as anterior and posterior restorative materials
1975