Citation Impact
Citing Papers
An All‐Small‐Molecule Organic Solar Cell with High Efficiency Nonfullerene Acceptor
2015
High efficiency all-polymer tandem solar cells
2016
Ultrathin Polyaniline-based Buffer Layer for Highly Efficient Polymer Solar Cells with Wide Applicability
2014
A high-performance oxygen evolution catalyst in neutral-pH for sunlight-driven CO2 reduction
2019 StandoutNobel
Soluble Dicyanodistyrylbenzene‐Based Non‐Fullerene Electron Acceptors with Optimized Aggregation Behavior for High‐Efficiency Organic Solar Cells
2014
Molecular helices as electron acceptors in high-performance bulk heterojunction solar cells
2015
Non-fullerene polymer solar cells based on a selenophene-containing fused-ring acceptor with photovoltaic performance of 8.6%
2016
Achieving High‐Performance Ternary Organic Solar Cells through Tuning Acceptor Alloy
2016
Advances in the high performance polymer electrolyte membranes for fuel cells
2012
Recent advances in water/alcohol-soluble π-conjugated materials: new materials and growing applications in solar cells
2013
Long-term stable polymer solar cells with significantly reduced burn-in loss
2014
High Open Circuit Voltage in Regioregular Narrow Band Gap Polymer Solar Cells
2014
Ionically Conducting Two‐Dimensional Heterostructures
2009
Green‐Solvent‐Processed Molecular Solar Cells
2014
Organic solar cells based on non-fullerene acceptors
2018 Standout
Tuning indium tin oxide work function with solution-processed alkali carbonate interfacial layers for high-efficiency inverted organic photovoltaic cells
2013
Charge and Spin Transport in an Organic Molecular Square
2015 StandoutNobel
26 mA cm−2 Jsc from organic solar cells with a low-bandgap nonfullerene acceptor
2017
8.4% efficient fullerene-free organic solar cells exploiting long-range exciton energy transfer
2014
Efficient organometal trihalide perovskite planar-heterojunction solar cells on flexible polymer substrates
2013 Standout
Nanochemistry and nanomaterials for photovoltaics
2013
A Fast Deposition‐Crystallization Procedure for Highly Efficient Lead Iodide Perovskite Thin‐Film Solar Cells
2014
Donor polymer design enables efficient non-fullerene organic solar cells
2016
Bay-linked perylene bisimides as promising non-fullerene acceptors for organic solar cells
2013
Slip-Stacked Perylenediimides as an Alternative Strategy for High Efficiency Nonfullerene Acceptors in Organic Photovoltaics
2014
Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
2019 StandoutNature
Single Junction Inverted Polymer Solar Cell Reaching Power Conversion Efficiency 10.31% by Employing Dual-Doped Zinc Oxide Nano-Film as Cathode Interlayer
2014
Organic Ternary Solar Cells: A Review
2013
Side chain engineering of n-type conjugated polymer enhances photocurrent and efficiency of all-polymer solar cells
2014
Planar heterojunction perovskite solar cells with superior reproducibility
2014
High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor
2016
Enhanced performance of polymer solar cell with ZnO nanoparticle electron transporting layer passivated byin situcross-linked three-dimensional polymer network
2013
Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells
2014 Standout
A H2-evolving photocathode based on direct sensitization of MoS3 with an organic photovoltaic cell
2013
Regioregular pyridyl[2,1,3]thiadiazole-co-indacenodithiophene conjugated polymers
2013
Low bandgap conjugated polymers based on mono-fluorinated isoindigo for efficient bulk heterojunction polymer solar cells processed with non-chlorinated solvents
2014
High Performance Organic Photovoltaics with Plasmonic-Coupled Metal Nanoparticle Clusters
2014
The effect of polymer solubilizing side-chains on solar cell stability
2015
Enhancement of the Efficiency and Stability of Organic Photovoltaic Devices via the Addition of a Lithium-Neutralized Graphene Oxide Electron-Transporting Layer
2014
An All‐Solution Processed Recombination Layer with Mild Post‐Treatment Enabling Efficient Homo‐Tandem Non‐fullerene Organic Solar Cells
2016
Design of a versatile interconnecting layer for highly efficient series-connected polymer tandem solar cells
2015
3d Transition Metals for C–H Activation
2018 Standout
Recent Advances in Improving the Stability of Perovskite Solar Cells
2015
Roll-coating fabrication of flexible organic solar cells: comparison of fullerene and fullerene-free systems
2015
Organic and solution-processed tandem solar cells with 17.3% efficiency
2018 StandoutScience
High-performance fullerene-free polymer solar cells with 6.31% efficiency
2014
Small-molecule solar cells with efficiency over 9%
2014
Synergistic Concurrent Enhancement of Charge Generation, Dissociation, and Transport in Organic Solar Cells with Plasmonic Metal–Carbon Nanotube Hybrids
2014
A Vinylene‐Bridged Perylenediimide‐Based Polymeric Acceptor Enabling Efficient All‐Polymer Solar Cells Processed under Ambient Conditions
2016
Upconversion Nanoparticles: Design, Nanochemistry, and Applications in Theranostics
2014 Standout
Non-halogenated solvents for environmentally friendly processing of high-performance bulk-heterojunction polymer solar cells
2013
A Star‐Shaped Perylene Diimide Electron Acceptor for High‐Performance Organic Solar Cells
2014
8.9% Single‐Stack Inverted Polymer Solar Cells with Electron‐Rich Polymer Nanolayer‐Modified Inorganic Electron‐Collecting Buffer Layers
2014
High-Performance Ternary Organic Solar Cell Enabled by a Thick Active Layer Containing a Liquid Crystalline Small Molecule Donor
2017
The origin of high efficiency in low-temperature solution-processable bilayer organometal halide hybrid solar cells
2013
Dramatic performance enhancement for large bandgap thick-film polymer solar cells introduced by a difluorinated donor unit
2015
25th Anniversary Article: Isoindigo‐Based Polymers and Small Molecules for Bulk Heterojunction Solar Cells and Field Effect Transistors
2014
Chemically Controlled Reversible and Irreversible Extraction Barriers Via Stable Interface Modification of Zinc Oxide Electron Collection Layer in Polycarbazole‐based Organic Solar Cells
2014
Versatile ternary organic solar cells: a critical review
2015
Noncovalent Functionalization of Graphene and Graphene Oxide for Energy Materials, Biosensing, Catalytic, and Biomedical Applications
2016 Standout
High‐Efficiency Nonfullerene Organic Solar Cells with a Parallel Tandem Configuration
2017
Robust Wide Visible-Light-Responsive Photoactivity for H2 Production over a Polymer/Polymer Heterojunction Photocatalyst: The Significance of Sacrificial Reagent
2015
All-Small-Molecule Nonfullerene Organic Solar Cells with High Fill Factor and High Efficiency over 10%
2017
Achieving 12.8% Efficiency by Simultaneously Improving Open‐Circuit Voltage and Short‐Circuit Current Density in Tandem Organic Solar Cells
2017
Synergetic plasmonic effect of Al and Au nanoparticles for efficiency enhancement of air processed organic photovoltaic devices
2013
Fused Hexacyclic Nonfullerene Acceptor with Strong Near‐Infrared Absorption for Semitransparent Organic Solar Cells with 9.77% Efficiency
2017
10.6% Certified Colloidal Quantum Dot Solar Cells via Solvent-Polarity-Engineered Halide Passivation
2016
Chiral Redox-Active Isosceles Triangles
2016 StandoutNobel
25th Anniversary Article: Bulk Heterojunction Solar Cells: Understanding the Mechanism of Operation
2013 StandoutNobel
Halide Perovskite Photovoltaics: Background, Status, and Future Prospects
2019 Standout
Air-processed polymer tandem solar cells with power conversion efficiency exceeding 10%
2015
Solution-processed organic tandem solar cells with power conversion efficiencies >12%
2016
Flexible organic tandem solar modules with 6% efficiency: combining roll-to-roll compatible processing with high geometric fill factors
2014
Perylene diimides: a thickness-insensitive cathode interlayer for high performance polymer solar cells
2014
Enhanced efficiency of polymer solar cells by adding a high-mobility conjugated polymer
2015
Stability of organic solar cells: challenges and strategies
2016
Perylenediimides as non-fullerene acceptors in bulk-heterojunction solar cells (BHJSCs)
2016
Organic Solar Cells beyond One Pair of Donor–Acceptor: Ternary Blends and More
2013
High-performance multiple-donor bulk heterojunction solar cells
2015
Intriguing Optoelectronic Properties of Metal Halide Perovskites
2016 Standout
Hybridization of MOFs and polymers
2017 StandoutNobel
New Insights into Perfluorinated Sulfonic-Acid Ionomers
2017 Standout
Highly Efficient Parallel-Like Ternary Organic Solar Cells
2017
Efficient polymer solar cells employing a non-conjugated small-molecule electrolyte
2015
Efficiency enhancement of inverted organic solar cells by introducing PFDTBT quantum dots into PCDTBT:PC71BM active layer
2014
Expanded Theory of H- and J-Molecular Aggregates: The Effects of Vibronic Coupling and Intermolecular Charge Transfer
2018 Standout
Effects of ultraviolet soaking on surface electronic structures of solution processed ZnO nanoparticle films in polymer solar cells
2014
Towards 15% energy conversion efficiency: a systematic study of the solution-processed organic tandem solar cells based on commercially available materials
2013
A General Route to Enhance Polymer Solar Cell Performance using Plasmonic Nanoprisms
2014
Third-generation organic electroluminescence materials
2014
Ternary Organic Solar Cells Based on Two Highly Efficient Polymer Donors with Enhanced Power Conversion Efficiency
2015
Corannulene derivatives as non-fullerene acceptors in solution-processed bulk heterojunction solar cells
2014
Slot‐Die Coating of a High Performance Copolymer in a Readily Scalable Roll Process for Polymer Solar Cells
2013
Tailor-Made Rylene Arrays for High Performance n-Channel Semiconductors
2014
Development of Polymer Acceptors for Organic Photovoltaic Cells
2014
Roll-coating fabrication of ITO-free flexible solar cells based on a non-fullerene small molecule acceptor
2015
Side-Chain Engineering of Isoindigo-Containing Conjugated Polymers Using Polystyrene for High-Performance Bulk Heterojunction Solar Cells
2013
Self n-doped [6,6]-phenyl-C61-butyric acid 2-((2-(trimethylammonium)ethyl)-(dimethyl)ammonium) ethyl ester diiodides as a cathode interlayer for inverted polymer solar cells
2014
Solution-Processed and Low-Temperature Annealed CrOx as Anode Buffer Layer for Efficient Polymer Solar Cells
2014
Nonfullerene acceptors based on extended fused rings flanked with benzothiadiazolylmethylenemalononitrile for polymer solar cells
2015
Terthiophene-Based D–A Polymer with an Asymmetric Arrangement of Alkyl Chains That Enables Efficient Polymer Solar Cells
2015
MAPbI3-xClx Mixed Halide Perovskite for Hybrid Solar Cells: The Role of Chloride as Dopant on the Transport and Structural Properties
2013
Achieving a high fill factor for organic solar cells
2016
Ion-containing polymers: new energy & clean water
2010
Au@Ag Core–Shell Nanocubes for Efficient Plasmonic Light Scattering Effect in Low Bandgap Organic Solar Cells
2014
Improving Structural Order for a High‐Performance Diketopyrrolopyrrole‐Based Polymer Solar Cell with a Thick Active Layer
2013
Advanced Thermoelectric Design: From Materials and Structures to Devices
2020 Standout
High-Performance Polymer Solar Cells with Solution-Processed and Environmentally Friendly CuOx Anode Buffer Layer
2013
Low-Temperature Solution-Processed Perovskite Solar Cells with High Efficiency and Flexibility
2014
Fused Nonacyclic Electron Acceptors for Efficient Polymer Solar Cells
2017
Panchromatic Sequentially Cast Ternary Polymer Solar Cells
2016
High-performance semi-transparent polymer solar cells possessing tandem structures
2013
Strongly Enhanced Photovoltaic Performance and Defect Physics of Air‐Stable Bismuth Oxyiodide (BiOI)
2017 StandoutNobel
Air-processed inverted organic solar cells utilizing a 2-aminoethanol-stabilized ZnO nanoparticle electron transport layer that requires no thermal annealing
2014
A Potential Perylene Diimide Dimer‐Based Acceptor Material for Highly Efficient Solution‐Processed Non‐Fullerene Organic Solar Cells with 4.03% Efficiency
2013
Non-fullerene acceptors for organic photovoltaics: an emerging horizon
2014
Efficient ternary blend polymer solar cells with indene-C60 bisadduct as an electron-cascade acceptor
2014
Vacuum-Assisted Thermal Annealing of CH3NH3PbI3for Highly Stable and Efficient Perovskite Solar Cells
2014
Controlling Solution‐Phase Polymer Aggregation with Molecular Weight and Solvent Additives to Optimize Polymer‐Fullerene Bulk Heterojunction Solar Cells
2014
Roll-coating fabrication of flexible large area small molecule solar cells with power conversion efficiency exceeding 1%
2014
A Large‐Bandgap Conjugated Polymer for Versatile Photovoltaic Applications with High Performance
2015
Improved Performance in Polymer Solar Cells Using Mixed PC61BM/PC71BM Acceptors
2014
Chlorine-free processed high performance organic solar cells
2014
Synthesis of phenanthro[1,10,9,8-cdefg]carbazole-based conjugated polymers for organic solar cell applications
2013
Molecular Design toward Highly Efficient Photovoltaic Polymers Based on Two-Dimensional Conjugated Benzodithiophene
2014
Strategic Design of Three-Dimensional (3D) Urchin-Like Pt–Ni Nanoalloys: How This Unique Nanostructure Boosts the Bulk Heterojunction Polymer Solar Cells Efficiency to 8.48%
2014
A high efficiency solution processed polymer inverted triple-junction solar cell exhibiting a power conversion efficiency of 11.83%
2014
Low-Bandgap Small Molecules as Non-Fullerene Electron Acceptors Composed of Benzothiadiazole and Diketopyrrolopyrrole for All Organic Solar Cells
2015
Efficient non-fullerene polymer solar cells enabled by tetrahedron-shaped core based 3D-structure small-molecular electron acceptors
2015
All‐Polymer Bulk Heterojuction Solar Cells with 4.8% Efficiency Achieved by Solution Processing from a Co‐Solvent
2014
Alkoxyphenylthiophene Linked Benzodithiophene Based Medium Band Gap Polymers for Organic Photovoltaics: Efficiency Improvement upon Methanol Treatment Depends on the Planarity of Backbone
2014
Benzobisthiazole as Weak Donor for Improved Photovoltaic Performance: Microwave Conductivity Technique Assisted Molecular Engineering
2013
Improved Performance of Ternary Polymer Solar Cells Based on A Nonfullerene Electron Cascade Acceptor
2016
Structure Evolution of Oligomer Fused‐Ring Electron Acceptors toward High Efficiency of As‐Cast Polymer Solar Cells
2016
n-Type Water/Alcohol-Soluble Naphthalene Diimide-Based Conjugated Polymers for High-Performance Polymer Solar Cells
2016
Highly Efficient Inverted Organic Solar Cells Through Material and Interfacial Engineering of Indacenodithieno[3,2‐b]thiophene‐Based Polymers and Devices
2013
Ambient roll-to-roll fabrication of flexible solar cells based on small molecules
2013
Design of perylene-diimides-based small-molecules semiconductors for organic solar cells
2017
Homocoupling Defects in Diketopyrrolopyrrole-Based Copolymers and Their Effect on Photovoltaic Performance
2014
Toward Large Scale Roll‐to‐Roll Production of Fully Printed Perovskite Solar Cells
2015
Organic Optoelectronic Materials: Mechanisms and Applications
2016
Synergistic Effect of Polymer and Small Molecules for High‐Performance Ternary Organic Solar Cells
2014
Optimization of the Power Conversion Efficiency of Room Temperature‐Fabricated Polymer Solar Cells Utilizing Solution Processed Tungsten Oxide and Conjugated Polyelectrolyte as Electrode Interlayer
2014
Enhanced polymer solar cells efficiency by surface coating of the PEDOT: PSS with polar solvent
2016
Characterization of tandem organic solar cells
2015
The influence of molecular orientation on organic bulk heterojunction solar cells
2014
Binary additives synergistically boost the efficiency of all-polymer solar cells up to 3.45%
2013
Orienting Oxygen Vacancies for Fast Catalytic Reaction
2013
From Binary to Ternary: Improving the External Quantum Efficiency of Small‐Molecule Acceptor‐Based Polymer Solar Cells with a Minute Amount of Fullerene Sensitization
2017
High-efficiency two-dimensional Ruddlesden–Popper perovskite solar cells
2016 StandoutNature
Molecular Design of Benzodithiophene-Based Organic Photovoltaic Materials
2016
Designing ternary blend bulk heterojunction solar cells with reduced carrier recombination and a fill factor of 77%
2016
Low-bandgap conjugated polymers enabling solution-processable tandem solar cells
2017
A pentacyclic aromatic lactam building block for efficient polymer solar cells
2013
Oligothiophene-bridged perylene diimide dimers for fullerene-free polymer solar cells: effect of bridge length
2015
All-Polymer Solar Cells with 3.3% Efficiency Based on Naphthalene Diimide-Selenophene Copolymer Acceptor
2013
Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals
2015 StandoutScience
Status and prospects for ternary organic photovoltaics
2015
Recent Developments in C–H Activation for Materials Science in the Center for Selective C–H Activation
2018
Side Chain Engineering in Solution-Processable Conjugated Polymers
2013
Manipulating Aggregation and Molecular Orientation in All‐Polymer Photovoltaic Cells
2015
Improved Performance of All‐Polymer Solar Cells Enabled by Naphthodiperylenetetraimide‐Based Polymer Acceptor
2017
Towards rational design of organic electron acceptors for photovoltaics: a study based on perylenediimide derivatives
2013
Interface engineering of highly efficient perovskite solar cells
2014 StandoutScience
Nonfullerene Acceptor Molecules for Bulk Heterojunction Organic Solar Cells
2018 Standout
Aromatic Ionomers with Highly Acidic Sulfonate Groups: Acidity, Hydration, and Proton Conductivity
2011
Highly efficient organic tandem solar cells: a follow up review
2013
Self-Organization of Amine-Based Cathode Interfacial Materials in Inverted Polymer Solar Cells
2014
Review: Fullerene based acceptors for efficient bulk heterojunction organic solar cell applications
2016
Optimized “Alloy‐Parallel” Morphology of Ternary Organic Solar Cells
2016
ITO Interface Modifiers Can Improve VOC in Polymer Solar Cells and Suppress Surface Recombination
2013
High-Efficiency Polycrystalline Thin Film Tandem Solar Cells
2015
Comparing Matched Polymer:Fullerene Solar Cells Made by Solution-Sequential Processing and Traditional Blend Casting: Nanoscale Structure and Device Performance
2014
Crystallinity Effects in Sequentially Processed and Blend-Cast Bulk-Heterojunction Polymer/Fullerene Photovoltaics
2014
High‐Performance Polymer Tandem Solar Cells Employing a New n‐Type Conjugated Polymer as an Interconnecting Layer
2016
Efficient Tandem and Triple-Junction Polymer Solar Cells
2013
The influence of spacer units on molecular properties and solar cell performance of non-fullerene acceptors
2015
Research opportunities to advance solar energy utilization
2016 StandoutScience
A Tetraphenylethylene Core‐Based 3D Structure Small Molecular Acceptor Enabling Efficient Non‐Fullerene Organic Solar Cells
2014
Reducing Voltage Losses in Cascade Organic Solar Cells while Maintaining High External Quantum Efficiencies
2017
Polymer Solar Cells with Diketopyrrolopyrrole Conjugated Polymers as the Electron Donor and Electron Acceptor
2014
High‐Efficiency All‐Polymer Solar Cells Based on a Pair of Crystalline Low‐Bandgap Polymers
2014
Multi-Component Synthesis of a Buta-1,3-diene-Linked Covalent Organic Framework
2022 StandoutNobel
Imide- and Amide-Functionalized Polymer Semiconductors
2014
Recent trends in polymer tandem solar cells research
2013
Efficient preparation of ultralarge graphene oxide using a PEDOT:PSS/GO composite layer as hole transport layer in polymer-based optoelectronic devices
2014
Polymer Homo‐Tandem Solar Cells with Best Efficiency of 11.3%
2015 Nobel
High-Performance Electron Acceptor with Thienyl Side Chains for Organic Photovoltaics
2016 Nobel
A Twisted Dimeric Perylene Diimide Electron Acceptor for Efficient Organic Solar Cells
2014
Graphitic Carbon Nitride (g-C3N4)-Based Photocatalysts for Artificial Photosynthesis and Environmental Remediation: Are We a Step Closer To Achieving Sustainability?
2016 Standout
Noble metal-free hydrogen evolution catalysts for water splitting
2015 Standout
Performance, morphology and photophysics of high open-circuit voltage, low band gap all-polymer solar cells
2014
25th Anniversary Article: A Decade of Organic/Polymeric Photovoltaic Research
2013
Environmentally Printing Efficient Organic Tandem Solar Cells with High Fill Factors: A Guideline Towards 20% Power Conversion Efficiency
2014
Broad Family of Carbon Nanoallotropes: Classification, Chemistry, and Applications of Fullerenes, Carbon Dots, Nanotubes, Graphene, Nanodiamonds, and Combined Superstructures
2015 Standout
Breaking the 10% Efficiency Barrier in Organic Photovoltaics: Morphology and Device Optimization of Well‐Known PBDTTT Polymers
2016
High-Efficiency Perovskite Solar Cells
2020 Standout
Tackling Energy Loss for High‐Efficiency Organic Solar Cells with Integrated Multiple Strategies
2018
A road towards 25% efficiency and beyond: perovskite tandem solar cells
2016
Minority Carrier Transport in Lead Sulfide Quantum Dot Photovoltaics
2017 StandoutNobel
A vacuum flash–assisted solution process for high-efficiency large-area perovskite solar cells
2016 StandoutScience
Thick Film Polymer Solar Cells Based on Naphtho[1,2‐c:5,6‐c]bis[1,2,5]thiadiazole Conjugated Polymers with Efficiency over 11%
2017
An electron acceptor based on indacenodithiophene and 1,1-dicyanomethylene-3-indanone for fullerene-free organic solar cells
2014
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
2016 StandoutScience
Next-generation organic photovoltaics based on non-fullerene acceptors
2018 Standout
Comparison of additive amount used in spin-coated and roll-coated organic solar cells
2014
Electron Acceptors Based on α-Substituted Perylene Diimide (PDI) for Organic Solar Cells
2016
Recent Advances in Ultrathin Two-Dimensional Nanomaterials
2017 Standout
The Active Layer Morphology of Organic Solar Cells Probed with Grazing Incidence Scattering Techniques
2014
Charge Transfer–Mediated Singlet Fission
2015
Functionalized graphene and other two-dimensional materials for photovoltaic devices: device design and processing
2015
Inorganic Solid-State Electrolytes for Lithium Batteries: Mechanisms and Properties Governing Ion Conduction
2015 Standout
Discovery of blue singlet exciton fission molecules via a high-throughput virtual screening and experimental approach
2019 StandoutNobel
Two Well‐Miscible Acceptors Work as One for Efficient Fullerene‐Free Organic Solar Cells
2017
Highly Efficient 2D-Conjugated Benzodithiophene-Based Photovoltaic Polymer with Linear Alkylthio Side Chain
2014
Low Open-Circuit Voltage Loss in Solution-Processed Small-Molecule Organic Solar Cells
2016
Realizing Small Energy Loss of 0.55 eV, High Open‐Circuit Voltage >1 V and High Efficiency >10% in Fullerene‐Free Polymer Solar Cells via Energy Driver
2017
Challenges for commercializing perovskite solar cells
2018 StandoutScience
Improved Efficiency of Bulk Heterojunction Polymer Solar Cells by Doping Low-Bandgap Small Molecules
2014
Diindeno[1,2-g:1′,2′-s]rubicene: all-carbon non-fullerene electron acceptor for efficient bulk-heterojunction organic solar cells with high open-circuit voltage
2014
Low Band‐Gap Conjugated Polymers with Strong Interchain Aggregation and Very High Hole Mobility Towards Highly Efficient Thick‐Film Polymer Solar Cells
2014
Encapsulating Mobile Proton Carriers into Structural Defects in Coordination Polymer Crystals: High Anhydrous Proton Conduction and Fuel Cell Application
2016 StandoutNobel
Morphology analysis of near IR sensitized polymer/fullerene organic solar cells by implementing low bandgap heteroanalogue C-/Si-PCPDTBT
2014
Suppressed Charge Recombination in Inverted Organic Photovoltaics via Enhanced Charge Extraction by Using a Conductive Fullerene Electron Transport Layer
2014
Ultrathin Ammonium Heptamolybdate Films as Efficient Room-Temperature Hole Transport Layers for Organic Solar Cells
2014
A Fast Deposition‐Crystallization Procedure for Highly Efficient Lead Iodide Perovskite Thin‐Film Solar Cells
2014
Efficient organic solar cells processed from hydrocarbon solvents
2016 Standout
Nonfullerene Tandem Organic Solar Cells with High Open‐Circuit Voltage of 1.97 V
2016
Additives for morphology control in high-efficiency organic solar cells
2013
High-efficiency solution-processed perovskite solar cells with millimeter-scale grains
2015 StandoutScience
Reduced Intramolecular Twisting Improves the Performance of 3D Molecular Acceptors in Non‐Fullerene Organic Solar Cells
2016
Recent Advances in Bulk Heterojunction Polymer Solar Cells
2015 Standout
Single-junction polymer solar cells with high efficiency and photovoltage
2015 Standout
Heterocyclic Nanographenes and Other Polycyclic Heteroaromatic Compounds: Synthetic Routes, Properties, and Applications
2016 Standout
A perylene diimide (PDI)-based small molecule with tetrahedral configuration as a non-fullerene acceptor for organic solar cells
2015
Homo‐Tandem Polymer Solar Cells with VOC >1.8 V for Efficient PV‐Driven Water Splitting
2016
An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells
2015 Standout
Ternary Polymer Solar Cells based on Two Acceptors and One Donor for Achieving 12.2% Efficiency
2016
Thermal Stabilisation of Polymer–Fullerene Bulk Heterojunction Morphology for Efficient Photovoltaic Solar Cells
2014
Improvement of open-circuit voltage and photovoltaic properties of 2D-conjugated polymers by alkylthio substitution
2014
A Fluorinated Polythiophene Derivative with Stabilized Backbone Conformation for Highly Efficient Fullerene and Non-Fullerene Polymer Solar Cells
2016
Reducing burn-in voltage loss in polymer solar cells by increasing the polymer crystallinity
2014
High‐Performance All‐Polymer Solar Cells Via Side‐Chain Engineering of the Polymer Acceptor: The Importance of the Polymer Packing Structure and the Nanoscale Blend Morphology
2015
Highly efficient polymer solar cells cast from non-halogenated xylene/anisaldehyde solution
2015
More than Conformational “Twisting” or “Coplanarity”: Molecular Strategies for Designing High-Efficiency Nonfullerene Organic Solar Cells
2016
Fulleropyrrolidine interlayers: Tailoring electrodes to raise organic solar cell efficiency
2014 Science
N-Acyldithieno[3,2-b:2′,3′-d]pyrrole-Based Low-Band-Gap Conjugated Polymer Solar Cells with Amine-Modified [6,6]-Phenyl-C61-butyric Acid Ester Cathode Interlayers
2013
A planar electron acceptor for efficient polymer solar cells
2015
Revealing the Dynamics of Charge Carriers in Polymer:Fullerene Blends Using Photoinduced Time-Resolved Microwave Conductivity
2013
A universal halogen-free solvent system for highly efficient polymer solar cells
2015
Thermally Activated Delayed Fluorescence Materials Towards the Breakthrough of Organoelectronics
2014 Standout
Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes
2015 StandoutScience
Promising long-term stability of encapsulated ITO-free bulk-heterojunction organic solar cells under different aging conditions
2014
Polychiral Semiconducting Carbon Nanotube–Fullerene Solar Cells
2014
Impact of microstructure on local carrier lifetime in perovskite solar cells
2015 StandoutScience
Improved Thermal Stability of Polymer Solar Cells by Incorporating Porphyrins
2014
Self-Assembly of Colloidal Nanocrystals: From Intricate Structures to Functional Materials
2016 Standout
Direct (Hetero)Arylation: A New Tool for Polymer Chemists
2013
Design, Synthesis, and Photovoltaic Characterization of a Small Molecular Acceptor with an Ultra‐Narrow Band Gap
2017
Direct (Hetero)arylation Polymerization: Simplicity for Conjugated Polymer Synthesis
2016
Single‐Junction Organic Solar Cells Based on a Novel Wide‐Bandgap Polymer with Efficiency of 9.7%
2015 Nobel
Under the spotlight: The organic–inorganic hybrid halide perovskite for optoelectronic applications
2015
Interface design for high-efficiency non-fullerene polymer solar cells
2017
Dual Function Additives: A Small Molecule Crosslinker for Enhanced Efficiency and Stability in Organic Solar Cells
2015
Works of Ken Yoshimura being referenced
A polymer tandem solar cell with 10.6% power conversion efficiency
2013 Standout
10.2% Power Conversion Efficiency Polymer Tandem Solar Cells Consisting of Two Identical Sub‐Cells
2013
Synthesis and Evaluation of Novel Proton Exchange Membranes Containing the Semisquaric Acid Group
2010
Aromatic Polymer with Pendant Perfluoroalkyl Sulfonic Acid for Fuel Cell Applications
2009
An Efficient Triple‐Junction Polymer Solar Cell Having a Power Conversion Efficiency Exceeding 11%
2014
Impedance spectroscopy of perovskite air electrodes for SOFC prepared by laser ablation method
2004
Synthesis of 5H-Dithieno[3,2-b:2′,3′-d]pyran as an Electron-Rich Building Block for Donor–Acceptor Type Low-Bandgap Polymers
2013
Thiophene-substituted fulleropyrrolidine derivatives as acceptor molecules in a thin film organic solar cell
2012
Synthesis of 5H-Dithieno[3,2-b:2′,3′-d]pyran as an Electron-Rich Building Block for Donor–Acceptor Type Low-Bandgap Polymers
2013
Direct arylation polycondensation for the synthesis of bithiophene-based alternating copolymers
2012
Impedance study and TEM characterization of a PLD perovskite air electrode
2006