Citation Impact
Citing Papers
Defective TiO2 with oxygen vacancies: synthesis, properties and photocatalytic applications
2013 Standout
Laser-induced efficient reduction of Cr(VI) catalyzed by ZnO nanoparticles
2011
Study of Pd(II) adsorption over titanate nanotubes of different diameters
2008
A review of chemical, electrochemical and biological methods for aqueous Cr(VI) reduction
2012 Standout
Preparation and characterization of Cu and Zn modified nickel manganite NTC powders and thick film thermistors
2012
Flexible and Thermally Induced Switchable Fire Alarm Fabric Based On Layer-by-Layer Self-Assembled Silver Sheet/Fe3O4 Nanowire Composite
2019
Enhanced thermoelectric and mechanical performance of polycrystalline p-type Bi0.5Sb1.5Te3 by a traditional physical metallurgical strategy
2014
Sensitive Wearable Temperature Sensor with Seamless Monolithic Integration
2019 Standout
Carbon quantum dots and their applications
2014 Standout
Titanium Dioxide-Based Nanomaterials for Photocatalytic Fuel Generations
2014 Standout
Complexity reduction of a design problem in QFD using decomposition
2000
New Generation Adsorbents for Water Treatment
2012 Standout
New Insights into Intrinsic Point Defects in V2VI3 Thermoelectric Materials
2016
Product Development Decisions: A Review of the Literature
2001 Standout
Influence of Bi3+ as a sensitizer and SiO2 shell coating as a protecting layer towards the enhancement of red emission in LnVO4: Bi3+, Eu3+ @ SiO2 (Ln=Gd, Y and Gd/Y) powder phosphors for optical display devices
2012
Lanthanide-Activated Phosphors Based on 4f-5d Optical Transitions: Theoretical and Experimental Aspects
2017 Standout
Synthesis of nanostructured NiO and its application in laser-induced photocatalytic reduction of Cr(VI) from water
2011
Modularity in design of products and systems
1998
Synthesis and properties of Mn1.05−yCo1.95−x−z−wNixMgyAlzFewO4 NTC ceramic by co-precipitation method
2015
Tuning the Optical Property and Photocatalytic Performance of Titanate Nanotube toward Selective Oxidation of Alcohols under Ambient Conditions
2012
Concurrent engineering performance: Incremental versus radical innovation
2009
A wearable self-powered fire warning e-textile enabled by aramid nanofibers/MXene/silver nanowires aerogel fiber for fire protection used in firefighting clothing
2023 Standout
Advanced Thermoelectric Design: From Materials and Structures to Devices
2020 Standout
Luminescence Properties of Ba[sub 2]Mg(BO[sub 3])[sub 2]:Eu[sup 2+] Red Phosphors Synthesized by a Microwave-Assisted Sol-Gel Route
2009
Preparation and electrical properties of Ni0.6Mn2.4−Ti O4 NTC ceramics
2015
Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments
2022 Standout
Recent development and application of thermoelectric generator and cooler
2015
Data-Driven Review of Thermoelectric Materials: Performance and Resource Considerations
2013
Decomposition of the Design Process
1993
Efficient organizing of design activities
1993
Enhanced thermoelectric and mechanical properties in textured n-type Bi2Te3 prepared by spark plasma sintering
2007
Microstructural and electrical properties of Y0.2Al0.1Mn0.27−xFe0.16Ni0.27−x(Cr2x)oy for NTC thermistors
2015
Advances in thermoelectric materials research: Looking back and moving forward
2017 StandoutScience
Toward high-performance nanostructured thermoelectric materials: the progress of bottom-up solution chemistry approaches
2011
Interpretation of europium(III) spectra
2015 Standout
A systematic review of research on innovation in hospitality and tourism
2016 Standout
Negative Temperature Coefficient Resistance (NTCR) Ceramic Thermistors: An Industrial Perspective
2009 Standout
Rationally Designing High-Performance Bulk Thermoelectric Materials
2016 Standout
Quality function deployment: A literature review
2002 Standout
Graphitic Carbon Nitride (g-C3N4)-Based Photocatalysts for Artificial Photosynthesis and Environmental Remediation: Are We a Step Closer To Achieving Sustainability?
2016 Standout
Characterization of ternary (Ni,Co,Mn)3O4 thin films for microbolometer applications
2015
Review on battery thermal management system for electric vehicles
2018 Standout
Trends in research and development of protonic ceramic electrolysis cells
2019
Structuring product development processes
2001
A convenient method to prepare a novel alkali metal sodium doped carbon nitride photocatalyst with a tunable band structure
2014
Energy savings by energy management systems: A review
2015 Standout
Applying the design structure matrix to system decomposition and integration problems: a review and new directions
2001 Standout
Re-engineering of the design process for concurrent engineering
2000
A review on the production of metal matrix composites through stir casting – Furnace design, properties, challenges, and research opportunities
2019 Standout
Engineering design management: An information structure approach
1999
Microstructural, electrical and reliability aspects of chromium doped Ni–Mn–Fe–O NTC thermistor materials
2008
Dimensionality-dependent photocatalytic activity of TiO2-based nanostructures: nanosheets with a superior catalytic property
2013
Effect of fly ash particles on the mechanical properties of aluminium casting alloy A535
2005
Optimal sizing of residential SOFC cogeneration system for power interchange operation in housing complex from energy-saving viewpoint
2011
Works of K. Park being referenced
The effect of processing conditions on the photoluminescence properties of Ca(Y0.94Eu0.06)BO4 phosphors synthesized by ultrasonic spray pyrolysis
2007
Thermoelectric properties of p-type Te doped Bi0.5Sb1.5Te3 fabricated by powder extrusion
2002
Structural and electrical properties of FeMg0.7Cr0.6Co0.7−xAlxO4 (0≤x≤0.3) thick film NTC thermistors
2005
The effect of Zn on the microstructure and electrical properties of Mn1.17−xNi0.93Co0.9ZnxO4 (0≤x≤0.075) NTC thermistors
2007
Modification of Oxygen-Ionic Transport Barrier of BaCo0.4Zr0.1Fe0.4Y0.1O3 Steam (Air) Electrode by Impregnating Samarium-Doped Ceria Nanoparticles for Proton-Conducting Reversible Solid Oxide Cells
2019
Fabrication and Electrical Properties of Mn–Ni–Co–Cu–Si Oxides Negative Temperature Coefficient Thermistors
2005
Concurrent engineering: decomposition and scheduling of design activities
1990
Microstructure and electrical properties of Ni1.0Mn2−xZrxO4 (0≤x≤1.0) negative temperature coefficient thermistors
2003
Preparation and photocatalytic activity of nanotubes obtained from titanium dioxide
2007
Structural and electrical properties of MgO-doped Mn1.4Ni1.2Co0.4−xMgxO4 (0≤x≤0.25) NTC thermistors
2006
Mn–Ni–Co–Cu–Zn–O NTC thermistors with high thermal stability for low resistance applications
2007
Electrochemical deposition of thermoelectric SbxTey thin films and nanowires
2009
Influence of the composition on the electrical properties of (Mn2.1−xNi0.9Six)O4 negative temperature coefficient thermistors
2004
Effect of Al2O3 addition on the microstructure and electrical properties of (Mn0.37Ni0.3Co0.33−xAlx)O4 (0≤x≤0.03) NTC thermistors
2005
Fabrication and characteristics of porous AISI 304L stainless steels by ceramic powder additions
2004
Red-emitting (Y0.5Gd0.5)0.94−xAlxEu0.06VO4 (0⩽x⩽0.04) phosphors for plasma display panel applications
2010
High-temperature thermoelectric properties of polycrystalline Zn1−x−yAlxTiyO ceramics
2006
Effect of partial substitution of Mg for Co in Mn1.4Ni1.2Co0.4O4 NTC thermistors on electrical stability
2006
Fabrication and electrical properties of nanocrystalline Dy3+-doped CeO2 for intermediate-temperature solid oxide fuel cells
2013
Effect of Cr2O3 addition on the microstructure and electrical properties of Mn-Ni-Co oxides NTC thermistors
2006