Citation Impact
Citing Papers
Effect of Ca addition on the microstructure and the mechanical properties of asymmetric double-sided friction stir welded AZ61 magnesium alloy
2020
Analysis of microstructural evolution during friction stir welding of ultrahigh-strength steel
2010
TiO2 Nanotubes: Synthesis and Applications
2011 Standout
Additively manufactured hierarchical stainless steels with high strength and ductility
2017 Standout
Nano-hydroxyapatite reinforced AZ31 magnesium alloy by friction stir processing: a solid state processing for biodegradable metal matrix composites
2013
Friction stir processing of magnesium–nanohydroxyapatite composites with controlled in vitro degradation behavior
2014
Enhancement of the Binding of Triglyceride-rich Lipoproteins to the Very Low Density Lipoprotein Receptor by Apolipoprotein E and Lipoprotein Lipase
1995
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
2016 Standout
Laser material processing
2011 Standout
Cathodic arc evaporation of (Ti,Al)N coatings and (Ti,Al)N/TiN multilayer-coatings—correlation between lifetime of coated cutting tools, structural and mechanical film properties
2003
Elucidation of interface joining mechanism during friction stir welding through Cu/Cu-10Zn interfacial observations
2019
Recent developments in stainless steels
2009 Standout
A critical review of high entropy alloys and related concepts
2016 Standout
Friction stir welded structural materials: beyond Al-alloys
2011
A review of friction stir welding of steels: Tool, material flow, microstructure, and properties
2017
A general strategy for the reliable joining of Al/Ti dissimilar alloys via ultrasonic assisted friction stir welding
2018
Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
2008 Standout
Friction stir welding of carbon steels
2006
The influence of pin geometry on bonding and mechanical properties in friction stir weld 2014 Al alloy
2005
Influence of heat input on post weld microstructure and mechanical properties of friction stir welded HSLA-65 steel
2012
Review: liquid phase sintering
2008 Standout
Anisotropic property of material arrangement in friction stir welding of dissimilar Mg alloys
2011
Recent Developments in Friction Stir Welding of Al-alloys
2014
Wear assessment of Al/Al2O3 nano-composite surface layer produced using friction stir processing
2010
The effects of nanosized particles on microstructural evolution of an in-situ TiB2/6063Al composite produced by friction stir processing
2015
Cemented carbide microstructures: a review
2018 Standout
Effect of rotational speed and probe profile on microstructure and hardness of AZ31/Al2O3 nanocomposites fabricated by friction stir processing
2010
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Fatigue properties of friction stir welded particulate reinforced aluminium matrix composites
2009
Effect of rotation rate on microstructure and texture evolution during friction stir welding of Ti–6Al–4V plates
2015
Nanocomposites: synthesis, structure, properties and new application opportunities
2009 Standout
Mechanical properties of nanocrystalline materials
2005 Standout
Metal Matrix Composites Reinforced by Nano-Particles—A Review
2014
Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase
2011 Standout
Friction stir welding of lap joints: Influence of process parameters on the metallurgical and mechanical properties
2009
Prediction of high-entropy stabilized solid-solution in multi-component alloys
2012 Standout
Ab initiocalculations of elastic properties of isotropic and oriented Ti1−xAlxN hard coatings
2007
Development of friction stir welding of high strength steel sheet
2011
A review about Friction Stir Welding of metal matrix composites
2016
Flexible control of the microstructure and mechanical properties of friction stir welded Ti–6Al–4V joints
2012
Microstructural characteristics and mechanical properties of friction stir welded joints of Ti–6Al–4V titanium alloy
2009
Distribution and stability of carbon nanotubes during multi-pass friction stir processing of carbon nanotube/aluminum composites
2012
Effect of rotation speed on microstructure and mechanical properties of Ti–6Al–4V friction stir welded joints
2009
Influence of friction stir welding parameters on the microstructural and mechanical properties of AA 6016-T4 thin welds
2008
Microstructure and mechanical properties of friction stir welded SAF 2507 super duplex stainless steel
2005
Effect of friction stir processing with SiC particles on microstructure and hardness of AZ31
2006
Towards heterogeneous AlxCoCrFeNi high entropy alloy via friction stir processing
2018
Architecture of PVD coatings for metalcutting applications: A review
2014
Nitride films deposited from an equimolar Al–Cr–Mo–Si–Ti alloy target by reactive direct current magnetron sputtering
2008
Effects of graphene nano-platelets (GNPs) on the microstructural characteristics and textural development of an Al-Mg alloy during friction-stir processing
2017
Friction stir lap welded advanced high strength steels: Microstructure and mechanical properties
2011
Modification of mechanical properties of friction stir welded Cu joint by additional liquid CO2 cooling
2013
Friction-stir welding of ultrafine grained austenitic 304L stainless steel produced by martensitic thermomechanical processing
2015
Microstructure and texture development during friction stir processing of Al–Mg alloy sheets with TiO2 nanoparticles
2014
Surface modification of titanium, titanium alloys, and related materials for biomedical applications
2004 Standout
The effect of silicon nitride on the laser surface alloying with Fe-Cr-Si3N4 powders
1995
Relationship between base metal properties and friction stir welding process parameters
2007
Material properties of graphene/aluminum metal matrix composites fabricated by friction stir processing
2014
Recent advances in friction-stir welding – Process, weldment structure and properties
2008 Standout
A review of dynamic recrystallization phenomena in metallic materials
2016 Standout
Friction Stir Processing Technology: A Review
2008 Standout
Microstructure evolution and texture development in a friction stir-processed AISI D2 tool steel
2014
Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review
2017
Enhanced mechanical properties of 70/30 brass joint by rapid cooling friction stir welding
2014
Friction stir welding joint of dissimilar materials between AZ31B magnesium and 6061 aluminum alloys: Microstructure studies and mechanical characterizations
2015
Recent developments in advanced aircraft aluminium alloys
2013 Standout
Fabrication of a new Al-Mg/graphene nanocomposite by multi-pass friction-stir processing: Dispersion, microstructure, stability, and strengthening
2017
Microstructure and mechanical properties of friction stir welded copper
2007
Microstructure evolutions after friction stir welding of severely deformed aluminum sheets
2012
Effect of grain size on the microstructure and mechanical properties of friction stir welded non-combustive magnesium alloys
2012
The effect of welding parameters on the corrosion behaviour of friction stir welded AA2024–T351
2006
Structure, Composition, and Morphology of Photoelectrochemically Active TiO2-xNx Thin Films Deposited by Reactive DC Magnetron Sputtering
2004
Fabrication of Al5083 surface composites reinforced by CNTs and cerium oxide nano particles via friction stir processing
2014
MWCNTs/AZ31 surface composites fabricated by friction stir processing
2006
Influence of Tool Rotational Speed on the Formation of Friction Stir Processing Zone in Cast Zk60/SiCp Magnesium Alloy Surface Composites
2018
Fine grained Mg–3Al–1Zn alloy with randomized texture in the double-sided friction stir welded joints
2013
Critical Factors Affecting the Wettability of α‐Alumina by Molten Aluminum
2004
Microstructure and mechanical properties of friction stir welded duplex Mg–Li alloy LZ91
2019
Feasibility study of friction stir welding of 6061-T6 aluminium alloy with AISI 1018 steel
2004
All‐Solid‐State Z‐Scheme Photocatalytic Systems
2014 Standout
Microstructure, mechanical properties and strengthening mechanism of titanium particle reinforced aluminum matrix composites produced by submerged friction stir processing
2018
Numerical investigation of stirred zone shape and its effect on mechanical properties in friction stir welding process
2019
Evaluation of the microstructure and wear behaviour of AA6063-B4C/TiB2 mono and hybrid composite layers produced by friction stir processing
2015
Surface composites by friction stir processing: A review
2015
Three defect types in friction stir welding of aluminum die casting alloy
2005
Influence of boron nitride nanoparticles on microstructure and wear behavior of AA6082/TiB 2 hybrid aluminum composites synthesized by friction stir processing
2016
Dissimilar Al/Mg alloys friction stir lap welding with Zn foil assisted by ultrasonic
2019
Improvement of mechanical properties of aluminum die casting alloy by multi-pass friction stir processing
2006
Semiconductor-based Photocatalytic Hydrogen Generation
2010 Standout
High strength and ductility of friction-stir-welded steel joints due to mechanically stabilized metastable austenite
2013
Study on microstructure and mechanical properties of 304 stainless steel joints by TIG, laser and laser-TIG hybrid welding
2009
Improvement of damping properties in laser processed superelastic Cu-Al-Mn shape memory alloys
2016 Standout
Microstructural and mechanical properties of a beta-type titanium alloy joint fabricated by friction stir welding
2017
Corrosion of a dissimilar friction stir weld joining aluminium alloys AA2024 and AA7010
2006
Reactive Oxygen Species (ROS)-Based Nanomedicine
2019 Standout
Improved visible-light responsive photocatalytic activity of N and Si co-doped titanias
2007
Microstructural evolution during friction stir-processing of pure iron
2008
Tribological Behavior of A356/Al2O3 Surface Nanocomposite Prepared by Friction Stir Processing
2013
Friction stir welding of a high carbon steel
2007
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Friction stir welding of aluminium alloys
2009 Standout
Mechanical properties of friction stir welded St 37 and St 44 steel joints
2018
AZ31B/7075-T6 alloys friction stir lap welding with a zinc interlayer
2018
Interface microstructure evolution of dissimilar friction stir butt welded F82H steel and SUS304
2011
Microstructures and properties of high-entropy alloys
2013 Standout
Precipitate evolution in friction stir welding of 2219-T6 aluminum alloys
2008
Effects of substrate bias on the structure and mechanical properties of (Al1.5CrNb0.5Si0.5Ti)Nx coatings
2012
Critical Factors Affecting the Wettability of α‐Alumina by Molten Aluminum
2004
Fabrication of a high strength ultra-fine grained Al-Mg-SiC nanocomposite by multi-step friction-stir processing
2017
Microstructures and mechanical properties of Al/Al2O3 surface nano-composite layer produced by friction stir processing
2008
CDRX modelling in friction stir welding of AA7075-T6 aluminum alloy: Analytical approaches
2007
Fabrication of in situ carbon fiber/aluminum composites via friction stir processing: Evaluation of microstructural, mechanical and tribological behaviors
2017
Dissimilar friction stir welding of duplex stainless steel to low alloy structural steel
2015
Different approaches to superhard coatings and nanocomposites
2004
Industrial Applications of Pulsed Power Technology
2007 Standout
The effect of post-weld heat treatment on the mechanical properties of 2024-T4 friction stir-welded joints
2009
Study of friction stir welding of 01420 aluminum–lithium alloy
2006
Recent progress on control strategies for inherent issues in friction stir welding
2020
Reactive friction stir processing of AA 5052–TiO2 nanocomposite: process–microstructure–mechanical characteristics
2014
Modeling hardness of polycrystalline materials and bulk metallic glasses
2011 Standout
Production and characterization of an advanced AA6061-Graphene-TiB2 hybrid surface nanocomposite by multi-pass friction stir processing
2019
A review on the production of metal matrix composites through stir casting – Furnace design, properties, challenges, and research opportunities
2019 Standout
Effects of post-annealing on the microstructure and mechanical properties of friction stir processed Al–Mg–TiO2 nanocomposites
2014
Formation of Ag+–N–TiO2 nanochains and their HPA-composites as highly visible light-sensitive photocatalysts toward two-color solar cells
2011
Microstructure and mechanical properties of hard zone in friction stir welded X80 pipeline steel relative to different heat input
2013
A review on the visible light active titanium dioxide photocatalysts for environmental applications
2012 Standout
Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel parts
2016
Expression of very low density lipoprotein receptor in the vascular wall. Analysis of human tissues by in situ hybridization and immunohistochemistry.
1996 StandoutNobel
High-Speed Friction Stir Welding of AA7075-T6 Sheet: Microstructure, Mechanical Properties, Micro-texture, and Thermal History
2017
In situ synthesizing Al3Ni for fabrication of intermetallic-reinforced aluminum alloy composites by friction stir processing
2012
Stress corrosion cracking susceptibility of friction stir welded AA7075–AA6056 dissimilar joint
2004
Effect of friction stir welding parameters on microstructural characteristics and mechanical properties of 2219-T6 aluminum alloy joints
2011
Works of K. Nogi being referenced
Heterogeneity of mechanical properties of friction stir welded joints of 1050-H24 aluminum alloy
2003
Phase transition and properties of Ti–Al–N thin films prepared by r.f.-plasma assisted magnetron sputtering
1999
Tensile properties and fracture locations of friction-stir-welded joints of 2017-T351 aluminum alloy
2003
Microstructure and mechanical properties of friction stir welded joints of AC4A cast aluminium alloy
2004
Friction stir welding characteristics of 2017-T351 aluminum alloy sheet
2005
Wear characteristics of a WC–Co tool in friction stir welding of AC4A+30vol%SiCp composite
2005
Friction stir welding of ultrafine grained plain low-carbon steel formed by the martensite process
2006
Influence of sputtering conditions on the structure and properties of Ti–Si–N thin films prepared by r.f.-reactive sputtering
2003
Characterization of Ti(NxOy) coatings produced by the arc ion plating method
1998
A sandwich-enzyme immunoassay for the quantification of lipoprotein lipase and hepatic triglyceride lipase in human postheparin plasma using monoclonal antibodies to the corresponding enzymes
1990
Surface Tension of Liquid Cr–O System
1992
Effect of oxygen content in He–O2 shielding gas on weld shape in ultra deep penetration TIG
2007
Tensile properties and fracture locations of friction-stir welded joints of 6061-T6 aluminum alloy
2003
Friction stir welding of hypereutectoid steel (SK5) below eutectoid temperature
2009
Mechanical Properties of Friction Stir Welded Carbon Steel Joints — Friction Stir Welding with and without Transformation
2008
Surface tension of molten silicon measured by the electromagnetic levitation method under microgravity
2000
Fullerene/A5083 composites fabricated by material flow during friction stir processing
2007
Tensile properties and fracture locations of friction-stir welded joints of 1050-H24 aluminum alloy
2003
Mechanical properties of friction stir welded joints of 1050 – H24 aluminium alloy
2003