Citation Impact
Citing Papers
Editor's comments: a critical look at the use of PLS-SEM in MIS quarterly
2012
Effect of fibre length and chemical modifications on the tensile properties of intimately mixed short sisal/glass hybrid fibre reinforced low density polyethylene composites
2004
Synthesis and surface engineering of iron oxide nanoparticles for biomedical applications
2004 Standout
Cancer nanotechnology: The impact of passive and active targeting in the era of modern cancer biology
2013 Standout
Heavy metal removal from water/wastewater by nanosized metal oxides: A review
2011 Standout
Applications of advanced hybrid organic–inorganic nanomaterials: from laboratory to market
2011 Standout
Design and fabrication of magnetic nanoparticles for targeted drug delivery and imaging
2009 Standout
Magnetic nanoparticles in MR imaging and drug delivery
2008 Standout
Magnetic Nanoparticles: Synthesis, Protection, Functionalization, and Application
2007 Standout
The role of solid nanoparticle technology in the parenteral delivery of poorly water-soluble drugs
2004
Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview
2012 Standout
A review on mechanical behavior of natural fiber based hybrid composites
2012
Flax fibre and its composites – A review
2013 Standout
Sisal fibre and its composites: a review of recent developments
2000 Standout
Some mechanical properties of untreated jute fabric-reinforced polyester composites
1999 Standout
Influence of Short Glass Fiber Addition on the Mechanical Properties of Sisal Reinforced Low Density Polyethylene Composites
1997
Experimental investigation and flow visualisation of the resin transfer mould filling process for non-woven hemp reinforced phenolic composites
2000
Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
2008 Standout
Properties and performances of various hybrid glass/natural fibre composites for curved pipes
2008
Banana Fiber Reinforced Polymer Composites - A Review
2010
Wear resistance of amorphous alloys and related materials
2002
The mechanical performance of hybrid phenol-formaldehyde-based composites reinforced with glass and oil palm fibres
2002
An updated and expanded assessment of PLS-SEM in information systems research
2017 Standout
Thermal conductivity of polymer-based composites: Fundamentals and applications
2016 Standout
Microtribological and electrochemical corrosion behaviors of polydopamine coating on APTS-SAM modified Si substrate
2009
Lignocellulose-based Hybrid Bilayer Laminate Composite: Part I - Studies on Tensile and Impact Behavior of Oil Palm Fiber-Glass Fiber-reinforced Epoxy Resin
2005
Advances in waterborne polymer/carbon material composites for electromagnetic interference shielding
2021 Standout
A simple review of soil reinforcement by using natural and synthetic fibers
2011 Standout
Microstructural effects on the fatigue crack growth resistance of a stainless steel CA6NM weld
2013
Electrical and electromagnetic interference shielding characteristics of GNP/UHMWPE composites
2016
Ecodesign of automotive components making use of natural jute fiber composites
2009 Standout
Studying the effect of fiber size and fiber loading on the mechanical properties of hybridized kenaf/PALF-reinforced HDPE composite
2011
Microfibrillated cellulose and new nanocomposite materials: a review
2010 Standout
Concurrent Initiation by Air in the Atom Transfer Radical Polymerization of Methyl Methacrylate
2003
Mechanical and abrasive wear behavior of glass and basalt fabric‐reinforced epoxy composites
2013
Mussel‐Inspired Polydopamine Coating as a Universal Route to Hydroxyapatite Crystallization
2010 Standout
A comprehensive review on the applications of coal fly ash
2014 Standout
Grit in the path to e-learning success
2016 Standout
Social presence, trust, and social commerce purchase intention: An empirical research
2015
Processing and Characterization of Jute Fiber Reinforced Thermoplastic Polymers
1991
Nitrogen ion implantation and in vitro corrosion behavior of as-cast Ti–6Al–7Nb alloy
2002
Characterization and properties of natural fiber polymer composites: A comprehensive review
2017 Standout
The preparation of magnetic nanoparticles for applications in biomedicine
2003 Standout
Monodisperse MFe2O4 (M = Fe, Co, Mn) Nanoparticles
2003 Standout
Using PLS path modeling in new technology research: updated guidelines
2016 Standout
Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect
2011 Standout
Segregated Hybrid Poly(methyl methacrylate)/Graphene/Magnetite Nanocomposites for Electromagnetic Interference Shielding
2017 Standout
Fracture and fatigue crack propagation properties of hardened 52100 steel
1989
Steels for bearings
2011 Standout
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
2016 Standout
Mechanical properties of glass/flax hybrid composites based on a novel modified soybean oil matrix material
2005
Biofibres and biocomposites
2007 Standout
Recent Progress on Ferroelectric Polymer-Based Nanocomposites for High Energy Density Capacitors: Synthesis, Dielectric Properties, and Future Aspects
2016 Standout
Studies on Jute Composites—A Literature Review
1995
Drug delivery and nanoparticles: Applications and hazards
2008 Standout
Performance of hybrid reinforcements in PVC composites. II: Use of surface‐modified mica and different cellulosic materials as reinforcements
1993
Hybrid Effect in the Mechanical Properties of Short Sisal/Glass Hybrid Fiber Reinforced Low Density Polyethylene Composites
1996
A review of recent developments in natural fibre composites and their mechanical performance
2015 Standout
Consistent Partial Least Squares Path Modeling1
2015 Standout
Living up to the chatbot hype: The influence of anthropomorphic design cues and communicative agency framing on conversational agent and company perceptions
2018 Standout
Compressive and ultrasonic properties of polyester/fly ash composites
2009
Tribological and mechanical behavior of particulate aluminum matrix composites
2014
Effects of environmental aging on the mechanical properties of bamboo–glass fiber reinforced polymer matrix hybrid composites
2002
A review on the tensile properties of natural fiber reinforced polymer composites
2011 Standout
Natural fibre-polymer composites
1990
A review of porous lightweight composite materials for electromagnetic interference shielding
2018
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Effect of water absorption on dimensional stability and impact energy of jute fibre reinforced polypropylene
1997
A review of the multi-component utilisation of coal fly ash
2012 Standout
Current status of recycling of fibre reinforced polymers: Review of technologies, reuse and resulting properties
2015 Standout
Tailoring of thermal and dielectric properties of LDPE-matrix composites by the volume fraction, density, and surface modification of hollow glass microsphere filler
2013
State of the art on tribological behavior of polymer matrix composites reinforced with natural fibers in the green materials world
2015
Hydrothermal ageing of jute-glass fibre hybrid composites ? an acousto-ultrasonic study
1987
Tribological and electrical properties of silica‐filled epoxy nanocomposites
2011
Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites
2006 Standout
Mechanical behavior of amorphous alloys
2007 Standout
Biocomposites reinforced with natural fibers: 2000–2010
2012 Standout
Modeling the Transport of Low-Molecular-Weight Penetrants Within Polymer Matrix Composites
2006
The influence of chemical surface modification on the performance of sisal‐polyester biocomposites
2002
Initiation of shear bands near a stress concentration in metallic glass
2007
Mechanical properties and water absorption behavior of hybridized kenaf/pineapple leaf fibre-reinforced high-density polyethylene composite
2012
Kinetics of living radical polymerization
2004 Standout
Composites reinforced with cellulose based fibres
1999 Standout
Durability of bamboo-glass fiber reinforced polymer matrix hybrid composites
2002 Standout
Technological shifts in surface metrology
2012
Coir-Glass Intermingled Fibre Hybrid Composites
1991
Mechanical properties of kenaf fibre reinforced polymer composite: A review
2014 Standout
A review on basalt fibre and its composites
2015 Standout
Friction and wear properties of basalt fiber reinforced/solid lubricants filled polyimide composites under different sliding conditions
2009
Correlation of mechanical and tribological properties of organosilane modified cenosphere filled high density polyethylene
2010
Natural fiber polymer composites: A review
1999 Standout
Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys
2020 Standout
Partial least squares structural equation modeling (PLS-SEM)
2014 Standout
Works of K. Kishore being referenced
The Role of Service Level Agreements in Relational Management of Information Technology Outsourcing: An Empirical Study1
2009
Compressive fracture features of syntactic foams-microscopic examination
2002
On the wear mechanism of iron and nickel based transition metal-metalloid metallic glasses
1987
On the wear of aluminium-corundum composites
1983
Thermal-initiating potentialities of poly(methyl methacrylate) peroxide: Metamorphosis of block-into-block copolymer and comparative studies on surface texture and morphology
2001
Effect of surface roughness parameters and surface texture on friction and transfer layer formation in tin–steel tribo-system
2008
Poly(vinyl butyral) -polyaniline-magnetically functionalized fly ash cenosphere composite film for electromagnetic interference shielding
2016
Role of surface texture of harder surface on subsurface deformation
2008
Moisture Absorption Characteristics of Natural Fibre Composites
1986
Friction and transfer layer formation in polymer–steel tribo-system: Role of surface texture and roughness parameters
2011
Effect of microstructure and hardness on the grinding abrasive wear resistance of a ball bearing steel
1993
Compressive strength of jute-glass hybrid fibre composites
1983
Effect of surface treatment on the impact behaviour of fly‐ash filled polymer composites
2002
Electromagnetic interference shielding effectiveness of polyaniline-nickel oxide coated cenosphere composite film
2017
Some considerations on the occurrence of intergranular fracture during fatigue crack growth in steels
1986
A study on the effect of the type and content of filler in epoxy–glass composite system on the friction and slide wear characteristics
2005
Studies on fly ash–filled epoxy‐cast slabs under compression
2002
Jute-Glass Sandwich Composites
1985
Effect of Molybdenum and Silicon on the Electrochemical Corrosion Behavior of FeNiB Metallic Glasses
1988
SEM observations of the effects of velocity and load on the sliding wear characteristics of glass fabric–epoxy composites with different fillers
2000
Water ingression and the role of interface on the compressive properties of epoxy filled with treated fly ash
2002
Effect of contact at the interface on the compressive properties of fly ash-epoxy composites
2002
Dry wear studies on glass-fibre-reinforced epoxy composites
1983