Citation Impact
Citing Papers
LAMMPS - a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales
2021 Standout
Dislocation nucleation governed softening and maximum strength in nano-twinned metals
2010 Nature
Nanoscale shape-memory alloys for ultrahigh mechanical damping
2009
In situ observation of dislocation nucleation and escape in a submicrometre aluminium single crystal
2009
Dislocation-Source Shutdown and the Plastic Behavior of Single-Crystal Micropillars
2008
Additively manufactured hierarchical stainless steels with high strength and ductility
2017 Standout
A Review of Strain Analysis Using Electron Backscatter Diffraction
2011 Standout
Microstructure-Hardened Silver Nanowires
2006
Tensile ductility and necking of metallic glass
2007
A new view of the onset of plasticity during the nanoindentation of aluminium
2006
Size effect, critical resolved shear stress, stacking fault energy, and solid solution strengthening in the CrMnFeCoNi high-entropy alloy
2016
Processing of Bulk Metallic Glass
2009 Standout
Probing the limits of metal plasticity with molecular dynamics simulations
2017 Nature
Fundamental Differences in Mechanical Behavior between Two Types of Crystals at the Nanoscale
2008
Submicron Plasticity: Yield Stress, Dislocation Avalanches, and Velocity Distribution
2010
Recent advances in molecular imprinting technology: current status, challenges and highlighted applications
2011 Standout
Strong crystal size effect on deformation twinning
2010 Nature
Microstructure versus Flaw: Mechanisms of Failure and Strength in Nanostructures
2013
Correlation between Critical Temperature and Strength of Small-Scale bcc Pillars
2009
Dual-phase nanostructuring as a route to high-strength magnesium alloys
2017 Nature
Mechanical annealing and source-limited deformation in submicrometre-diameter Ni crystals
2007
Bioinspired structural materials
2014 Standout
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
2016 Standout
Size-affected single-slip behavior of pure nickel microcrystals
2005
Emergence of strain-rate sensitivity in Cu nanopillars: Transition from dislocation multiplication to dislocation nucleation
2011
Mechanism for shear banding in nanolayered composites
2010
Design and Preparation of Porous Polymers
2012 Standout
Catastrophic vs Gradual Collapse of Thin-Walled Nanocrystalline Ni Hollow Cylinders As Building Blocks of Microlattice Structures
2011
Scale invariance in plastic flow of crystalline solids
2006
Emerging Engineered Wood for Building Applications
2022 Standout
Compressive strengths of molybdenum alloy micro-pillars prepared using a new technique
2007
Ultra-strength materials
2010
A critical review of high entropy alloys and related concepts
2016 Standout
FIB damage of Cu and possible consequences for miniaturized mechanical tests
2007
Polymer-Modified Opal Nanopores
2006
In situ TEM compression testing of Mg and Mg–0.2 wt.% Ce single crystals
2010
Atomic-level structure and structure–property relationship in metallic glasses
2010 Standout
Functional Nucleic Acid Sensors
2009 Standout
Bulk and microscale compressive behavior of a Zr-based metallic glass
2008
THE DIFFUSION-MULTIPLE APPROACH TO DESIGNING ALLOYS
2005
Effects of focused ion beam induced damage on the plasticity of micropillars
2009
Wood Derived Cellulose Scaffolds—Processing and Mechanics
2020
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
2015 Standout
Uniaxial compression of fcc Au nanopillars on an MgO substrate: The effects of prestraining and annealing
2009
A universal scaling law for the strength of metal micropillars and nanowires
2009
Deformation of micron-sized aluminium bi-crystal pillars
2009
Direct observation of the NiTi martensitic phase transformation in nanoscale volumes
2009
Sample-size effects in the yield behavior of nanocrystalline nickel
2007
Miniaturized single-crystalline fcc metals deformed in tension: New insights in size-dependent plasticity
2009
Global melting of Zr57Ti5Ni8Cu20Al10 bulk metallic glass under microcompression
2007
Higher compressive strengths and the Bauschinger effect in conformally passivated copper nanopillars
2012
Breakdown of Schmid’s law in micropillars
2008
A further step towards an understanding of size-dependent crystal plasticity: In situ tension experiments of miniaturized single-crystal copper samples
2007
Effects of size on the strength and deformation mechanism in Zr-based metallic glasses
2010
On the importance of sample compliance in uniaxial microtesting
2008
Highly Stretchable and Sensitive Strain Sensor Based on Silver Nanowire–Elastomer Nanocomposite
2014 Standout
Necessary and sufficient elastic stability conditions in various crystal systems
2014 Standout
Nanoalloys: From Theory to Applications of Alloy Clusters and Nanoparticles
2008 Standout
Tensile and compressive behavior of gold and molybdenum single crystals at the nano-scale
2009
Microstructural evolution of the deformed volume beneath microindents in tungsten and copper
2006
Determination of Mechanical Properties of Copper at the Micron Scale
2006
Prevalence of shear banding in compression of Zr41Ti14Cu12.5Ni10Be22.5 pillars as small as 150 nm in diameter
2009
Stress-assisted discontinuous grain growth and its effect on the deformation behavior of nanocrystalline aluminum thin films
2006
Tensile deformation of electroplated copper nanopillars
2010
Athermal mechanisms of size-dependent crystal flow gleaned from three-dimensional discrete dislocation simulations
2008
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Quantitative In Situ Mechanical Testing in Electron Microscopes
2010
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
2009 Standout
Sample size effect and microcompression of Mg65Cu25Gd10 metallic glass
2007
Size-dependent plasticity in an Nb25Mo25Ta25W25 refractory high-entropy alloy
2013
Plasticity of Micrometer-Scale Single Crystals in Compression
2009
Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy
2013 Standout
Effects of size on the mechanical response of metallic glasses investigated through in situ TEM bending and compression experiments
2009
Cold versus hot shear banding in bulk metallic glass
2009
Anisotropy in the plastic flow properties of single-crystal α titanium determined from micro-cantilever beams
2009
Highly Active and Stable DNAzyme−Carbon Nanotube Hybrids
2005
Tensile and compressive behavior of tungsten, molybdenum, tantalum and niobium at the nanoscale
2010
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review
2017 Standout
Emergence of enhanced strengths and Bauschinger effect in conformally passivated copper nanopillars as revealed by dislocation dynamics
2013
The deformation of Gum Metal through in situ compression of nanopillars
2010
Texture Evolution During Bending of a Single Crystal Copper Nanowire Studied by EBSD and Crystal Plasticity Finite Element Simulations
2008
New strategies and tests to accelerate discovery and development of multi-principal element structural alloys
2016
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
Size-dependent plasticity and fracture of a metallic glass in compression
2008
Size effect on strength and strain hardening of small-scale [111] nickel compression pillars
2008
Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD
2010 Standout
Gradient single-crystal plasticity with free energy dependent on dislocation densities
2007
Carbothermal shock synthesis of high-entropy-alloy nanoparticles
2018 StandoutScience
Advanced Thermoelectric Design: From Materials and Structures to Devices
2020 Standout
Scaling laws in plastic deformation
2006
Combinatorial approaches as effective tools in the study of phase diagrams and composition–structure–property relationships
2006
Strong, lightweight, and recoverable three-dimensional ceramic nanolattices
2014 StandoutScience
Ab initio phonon scattering by dislocations
2017
Architected cellular materials: A review on their mechanical properties towards fatigue-tolerant design and fabrication
2021
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
2016 StandoutNature
Protocols for the Optimal Design of Multi‐Functional Cellular Structures: From Hypersonics to Micro‐Architected Materials
2011
Polymer Brushes via Surface-Initiated Controlled Radical Polymerization: Synthesis, Characterization, Properties, and Applications
2009 Standout
Extraction of bulk metallic-glass yield strengths using tapered micropillars in micro-compression experiments
2009
Size-Dependent Fracture of Silicon Nanoparticles During Lithiation
2012 Standout
Viscoplasticity of heterogeneous metallic materials
2008
Influence of Homogeneous Interfaces on the Strength of 500 nm Diameter Cu Nanopillars
2011
Effects of pre-strain on the compressive stress–strain response of Mo-alloy single-crystal micropillars
2008
Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients
2005
Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect
2011 Standout
Transition from deterministic to stochastic deformation
2010
A review of dynamic recrystallization phenomena in metallic materials
2016 Standout
Micro-compression testing: A critical discussion of experimental constraints
2009
Deformability of ultrahigh strength 5nm Cu∕Nb nanolayered composites
2008
Current state of Fe-Mn-Al-C low density steels
2017 Standout
Fabrication and Microstructure Control of Nanoscale Mechanical Testing Specimens via Electron Beam Lithography and Electroplating
2009
Estimating the strength of single-ended dislocation sources in micron-sized single crystals
2007
High-throughput diffusion multiples
2005
Plastic deformation of indium nanostructures
2011
Deformation mechanisms in ultrahigh-strength and high-ductility nanostructured FeMnAlC alloy
2013
Crystal rotation in Cu single crystal micropillars: In situ Laue and electron backscatter diffraction
2008
The Mechanics and Physics of Defect Nucleation
2007
Effects of trapping dislocations within small crystals on their deformation behavior
2009
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
2018 StandoutScience
Loss of pseudoelasticity in nickel–titanium sub-micron compression pillars
2007
A search for evidence of strain gradient hardening in Au submicron pillars under uniaxial compression using synchrotron X-ray microdiffraction
2007
Nanoscale gold pillars strengthened through dislocation starvation
2006
Microcompression of single-crystal magnesium
2009
Dislocation Avalanches, Strain Bursts, and the Problem of Plastic Forming at the Micrometer Scale
2007 Science
Perspectives on Titanium Science and Technology
2013 Standout
Friction Stir Processing of Investment-Cast Ti-6Al-4V: Microstructure and Properties
2007
Toward a quantitative understanding of mechanical behavior of nanocrystalline metals
2007 Standout
Deformation twinning in submicron and micron pillars of twinning-induced plasticity steel
2012
Dislocation structures and their relationship to strength in deformed nickel microcrystals
2008
Effect of sample size on deformation in amorphous metals
2008
Orientation-independent pseudoelasticity in small-scale NiTi compression pillars
2008
Transformation-induced plasticity during pseudoelastic deformation in Ni–Ti microcrystals
2009
Effect of orientation and loading rate on compression behavior of small-scale Mo pillars
2009
Modeling the Nucleation and Growth of Li at Metal Current Collector/LiPON Interfaces
2015
Strength and plasticity of nanocrystalline materials and nanosized crystals
2011
Comparing the strength of f.c.c. and b.c.c. sub-micrometer pillars: Compression experiments and dislocation dynamics simulations
2008
Effects of focused ion beam milling on the nanomechanical behavior of a molybdenum-alloy single crystal
2007
Surface-controlled dislocation multiplication in metal micropillars
2008
Size effect in contact compression of nano- and microscale pyramid structures
2006
Plasticity in Confined Dimensions
2010
Nature’s hierarchical materials
2007 Standout
Ultralight Metallic Microlattices
2011 StandoutScience
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Lattice instabilities in metallic elements
2012
Size effects on strength and plasticity of vanadium nanopillars
2010
Plastic flow and failure resistance of metallic glass: Insight fromin situcompression of nanopillars
2008
Microstructures and properties of high-entropy alloys
2013 Standout
Template Synthesized Molecularly Imprinted Polymer Nanotube Membranes for Chemical Separations
2006
Investigation of the indentation size effect through the measurement of the geometrically necessary dislocations beneath small indents of different depths using EBSD tomography
2008
A microcompression study of shape-memory deformation in U–13at.% Nb
2009
An analysis of exhaustion hardening in micron-scale plasticity
2007
Twinning-induced plasticity (TWIP) steels
2017 Standout
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
Ultralight, ultrastiff mechanical metamaterials
2014 StandoutScience
Size effects in strength and plasticity of single-crystalline titanium micropillars with prismatic slip orientation
2011
Insight into the deformation behavior of niobium single crystals under uniaxial compression and tension at the nanoscale
2009
Scale-Free Intermittent Flow in Crystal Plasticity
2006 Science
Microcompression study of Mg (0001) single crystal
2010
High dislocation density–induced large ductility in deformed and partitioned steels
2017 StandoutScience
High-entropy alloys
2019 Standout
Size effects in Al nanopillars: Single crystalline vs. bicrystalline
2011
The role of the weakest-link mechanism in controlling the plasticity of micropillars
2008
Size effects in the deformation of sub-micron Au columns
2006
Ultrahigh Strength Single Crystalline Nanowhiskers Grown by Physical Vapor Deposition
2009
Superelasticity and Shape Memory in Micro‐ and Nanometer‐scale Pillars
2007
On the plasticity of small-scale nickel–titanium shape memory alloys
2009
Nanoscale alloys and core-shell materials: Model predictions of the nanostructure and mechanical properties
2007
Critical size and strength of the best bulk metallic glass former in the Mg–Cu–Gd ternary system
2006
Jerky-flow characteristics for a Zr-based bulk metallic glass
2010
Revealing the Maximum Strength in Nanotwinned Copper
2009 StandoutScience
Evidence for an elementary process in bone plasticity with an activation enthalpy of 1 eV
2006
Effects of initial orientation, sample geometry and friction on anisotropy and crystallographic orientation changes in single crystal microcompression deformation: A crystal plasticity finite element study
2007
Ultrafast shape change and joining of small-volume materials using nanoscale electrical discharge
2015
Contribution to size effect of yield strength from the stochastics of dislocation source lengths in finite samples
2006
Influence of specimen dimensions on the tensile behavior of ultrafine-grained Cu
2008
Molecular imprinting: perspectives and applications
2016 Standout
Direct measurements of shear band propagation in metallic glasses – An overview
2011
Influence of specimen dimensions and strain measurement methods on tensile stress–strain curves
2009
Works of J.N. Florando being referenced
Exploring specimen size effects in plastic deformation of Ni3(Al, Ta)
2002
Dislocation multi-junctions and strain hardening
2006 Nature
Microstructure and Mechanical Properties of 21-6-9 Stainless Steel Electron Beam Welds
2017
Achieving the ideal strength in annealed molybdenum nanopillars
2010
Mesoscale strain measurement in deformed crystals: A comparison of X-ray microdiffraction with electron backscatter diffraction
2010
Simulation of the main physical processes in remote laser penetration with large laser spot size
2015
Effect of strain rate and dislocation density on the twinning behavior in tantalum
2016
Sample Dimensions Influence Strength and Crystal Plasticity
2004 StandoutScience
Studies of shear band velocity using spatially and temporally resolved measurements of strain during quasistatic compression of a bulk metallic glass
2009