Citation Impact
Citing Papers
Additive manufacturing of Ti6Al4V alloy: A review
2018 Standout
Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment
2004 Standout
Strategies for improving the sustainability of structural metals
2019 StandoutNature
High-impact polystyrene/halloysite nanocomposites prepared by emulsion polymerization using sodium dodecyl sulfate as surfactant
2011
Recent developments in stainless steels
2009 Standout
Activation energy calculations for discontinuous yielding in Inconel 718SPF
2001
Back stress strengthening and strain hardening in gradient structure
2016 Standout
Low cycle fatigue behavior of ferritic Fe-24Cr-4Al alloy at high temperatures
1995
Observation of conduction electrons in Sb-implanted SnO2 by ultraviolet photoemission spectroscopy
1991
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
2015 Standout
The surface and materials science of tin oxide
2005 Standout
Physical metallurgy of Ti–Ni-based shape memory alloys
2005 Standout
Influence of critical surface defects and localized competition between anodic dissolution and hydrogen effects during stress corrosion cracking of a 7050 aluminium alloy
1997
Advancing towards constitutive equations for the metal industry via the LEDS theory
2004
Optical and electrical properties of radio frequency sputtered tin oxide films doped with oxygen vacancies, F, Sb, or Mo
1994
Plastic strain-induced grain refinement at the nanometer scale in copper
2006 Standout
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
2009 Standout
An investigation of surface nanocrystallization mechanism in Fe induced by surface mechanical attrition treatment
2002 Standout
Mechanical behavior and damage kinetics in nodular cast iron: Part II. Hardening and damage
2000
Tin doped indium oxide thin films: Electrical properties
1998 Standout
Stiffness, Strength, and Ductility of Nanoscale Thin Films and Membranes: A Combined Wrinkling–Cracking Methodology
2011
Effect of interstitial solutes on the strength and ductility of titanium
1981
Analysis of the hysteresis loops of a martensitic steel
2006
Deformation twinning
1995 Standout
The stability of SnO2surfaces
1992
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
Scanning electron microscopy-electron channelling contrast investigation of recrystallization during cyclic deformation of ultrafine grained copper processed by equal channel angular pressing
2002
Study of Surface Segregation of Antimony on SnO2 Surfaces by Computer Simulation Techniques
1999
Effects of neutron irradiation and subsequent annealing on strength and toughness of SiC ceramics
1990
Photoinduced reactivity of titanium dioxide
2004 Standout
A mechanistic study of transgranular stress corrosion cracking of type 304 stainless steel
1991
Influence of different process parameters on physical properties of fluorine dopes indium oxide thin films
1994
Microstructural size effects on mechanical properties of high purity nickel
2010
The activity of non-basal slip systems and dynamic recovery at room temperature in fine-grained AZ31B magnesium alloys
2003 Standout
Dislocation-free zones in fatigued copper polycrystals
1996
Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments
2022 Standout
Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment
2006 Standout
On the role of non-basal deformation mechanisms for the ductility of Mg and Mg–Y alloys
2010 Standout
Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging
2011 Standout
Current state of Fe-Mn-Al-C low density steels
2017 Standout
Evolution of dislocation structure induced by cyclic deformation in a directionally solidified cobalt base superalloy
1999
Influence of the temperature on the tensile behaviour of a modified 9Cr–1Mo T91 martensitic steel
2010
3D printing of polymer matrix composites: A review and prospective
2016 Standout
Properties and Applications of Polyvinyl Alcohol, Halloysite Nanotubes and Their Nanocomposites
2015 Standout
The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy
2013 Standout
Microstructure and mechanical properties of MIM213 superalloy
2015
Nonconvex energy minimization and dislocation structures in ductile single crystals
1999
Scaling laws for dislocation microstructures in monotonic and cyclic deformation of fcc metals
2011
Observation of conduction electrons in Sb-implanted SnO2 by ultraviolet photoemission spectroscopy
1991
Slip, twinning, and fracture in hexagonal close-packed metals
1981 Standout
Surface chemistry of atomic layer deposition: A case study for the trimethylaluminum/water process
2005 Standout
Improvement of low-cycle fatigue resistance in TWIP steel by regulating the grain size and distribution
2017
A study on low cost-high conducting fluorine and antimony-doped tin oxide thin films
2005
Metal oxide-based gas sensor research: How to?
2006 Standout
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
2018 StandoutScience
Macroscopic analysis of interfacial properties of flax/PLLA biocomposites
2010
The theory of dislocation-based crystal plasticity
1999
Perspectives on Titanium Science and Technology
2013 Standout
Controlled growth of tin dioxide thin films by atomic layer epitaxy
1994
MICROSTRUCTURAL AND ENVIRONMENTAL EFFECTS ON FATIGUE CRACK PROPAGATION IN DUPLEX STAINLESS STEELS
1994
Low cycle fatigue behaviour in vacuum of a 316L-type austenitic stainless steel between 20 and 600°C—Part II: Dislocation structure evolution and correlation with cyclic behaviour
1997
Handbook of SiC properties for fuel performance modeling
2007 Standout
Tuning Low Cycle Fatigue Properties of Cu-Be-Co-Ni Alloy by Precipitation Design
2018
Hydrogen embrittlement in different materials: A review
2018 Standout
Evolution of dislocation structures and cyclic behaviour of a 316L-type austenitic stainless steel cycled in vacuo at room temperature
1989
Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
2016
Analysis of the hysteresis loops of a martensitic steel
2006
Hydrogen Assisted Cracking of High Strength Alloys
2003
Effective and internal stresses in cyclic straining of 316 stainless steel
1996
Metallic implant biomaterials
2014 Standout
The onset of twinning in metals: a constitutive description
2001 Standout
Micro-scale measurements of plastic strain field, and local contributions of slip and twinning in TWIP steels during in situ tensile tests
2016
Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B
2004 Standout
Effect of precipitates on the corrosion?fatigue crack initiation of ISO 5832-9 stainless steel biomaterial
2004
Microstructures and properties of high-entropy alloys
2013 Standout
Extra strengthening and work hardening in gradient nanotwinned metals
2018 Science
Principles of equal-channel angular pressing as a processing tool for grain refinement
2006 Standout
Twinning-induced plasticity (TWIP) steels
2017 Standout
On the cyclic softening behavior of SAF 2507 duplex stainless steel
2006
Biocomposites reinforced with natural fibers: 2000–2010
2012 Standout
Recent advance in research on halloysite nanotubes-polymer nanocomposite
2014 Standout
Fatigue behaviors of AISI 316L stainless steel with a gradient nanostructured surface layer
2015 Standout
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
2018 Standout
On the origin of the tensile flow stress in the stainless steel AISI 316L at 300 K: back stress and effective stress
1999 Standout
Ultrahigh Strength and High Electrical Conductivity in Copper
2004 StandoutScience
Residual stress induced tension-compression asymmetry of gradient nanograined copper
2018
High-entropy alloys
2019 Standout
Understanding Magnesium Corrosion—A Framework for Improved Alloy Performance
2003 Standout
Laser assisted additive manufacturing of continuous fiber reinforced thermoplastic composites
2017
Transport properties of undoped and NH3-doped polycrystalline SnO2 with low background electron concentrations
2004
Mechanistic models for environmentally-assisted cracking in sour service
2017
Mechanism of Corrosion Fatigue in Super Duplex Stainless Steel in 3.5 percent NaCI Solution
1997
Surface nanocrystallization of 316L stainless steel induced by ultrasonic shot peening
2000 Standout
Cyclic stress-strain behaviour of austenitic Fe-29.7Mn-8.7A1-1.04C alloy at room temperature
1987
Cyclic deformation behavior of Cu16at.%Al single crystals Part III: Friction stress and back stress behavior
1990
A pyrosol process to deposit large-area SnO2:F thin films and its use as a transparent conducting substrate for CdTe solar cells
2001
Sub–10 nm polyamide nanofilms with ultrafast solvent transport for molecular separation
2015 StandoutScience
A review on additive manufacturing of polymer-fiber composites
2017 Standout
Controlled growth of antimony-doped tin dioxide thin films by atomic layer epitaxy
1994
Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys
2020 Standout
Cleavage fracture of austenite induced by nitrogen supersaturation
1994
Works of J.I. Dickson being referenced
Microstructural and fractographic aspects of corrosion fatigue
1992
Fatigue propagation behaviour of polystyrene/polyethylene blends
1998
Mode I interlaminar crack propagation in continuous glass fiber/polypropylene composites: temperature and molding condition dependence
2003
Geometrical factors influencing the orientations of dipolar dislocation structures produced by cyclic deformation of f.c.c. metals
1986
Fatigue-Corrosion De L'acier Austeno-Ferritique KCR 171 Dans L'eau Blanche
1984
An explanation of labyrinth walls in fatigued f.c.c. metals
1986
Effects of Internal Stresses Due to a Dispersed Phase on the Fracture Toughness of Glass
1980
The incorporation of slip dislocations in {102} twins in zirconium
1973
Injection and compression molding of polystyrene/high‐density polyethylene blends—phase morphology and tensile behavior
1997
The orientations of dipolar dislocation structures produced by the cyclic deformation of B.C.C. metals
1988
Yield points obtained by aging at two stresses in titanium, zirconium and zircaloy-2
1980
Influence of ageing stress on yield point phenomenon in very low carbon steel
1979
Cyclic softening and thermally activated deformation of titanium and zirconium
1983
Fractographic interpretation of the fatigue crack propagation behavior of polystyrene and polystyrene/polyethylene blends
2001
Grain growth and carbide precipitation in superalloy, UDIMET 520
1998
A comparison of two simple methods for measuring cyclic internal and effective stresses
1984
A comparison of SCC velocity measurements under conditions of constant load and constant displacement
1984
Thickness Dependence of Transport Properties of Doped Polycrystalline Tin Oxide Films
1985
Loop patch orientations in the matrix structure of cyclically deformed copper
1988
Yield point effects in α-titanium during interrupted tensile tests at 300–496°K
1975
The identification of labyrinth wall orientations in cyclically deformed AISI-SAE 316 stainless steel
1986
An intermediate plateau in the cyclic stress-strain curve of α brass
1984
Stress corrosion cracking in aluminium alloy 7075-T651 by discrete crack jumps as indicated by fractography and acoustic emission
1985
The occurrence of dislocation-free zones at grain boundaries and free surfaces during cyclic deformation
1987
The fractography of stress corrosion cracking of 310 stainless steel: Crystallographic aspects and the influence of the stress intensity factor
1987