Citation Impact
Citing Papers
Strong and tough mineralized PLGA nanofibers for tendon-to-bone scaffolds
2013
Mechanical Properties of Native and Cross-linked Type I Collagen Fibrils
2007
Cancer nanotechnology: opportunities and challenges
2005 Standout
Early detection of aging cartilage and osteoarthritis in mice and patient samples using atomic force microscopy
2009 Standout
How machine learning can help select capping layers to suppress perovskite degradation
2020 StandoutNobel
Continuous‐Flow Technology—A Tool for the Safe Manufacturing of Active Pharmaceutical Ingredients
2015 Standout
Processing of Bulk Metallic Glass
2009 Standout
Electrospinning: A fascinating fiber fabrication technique
2010 Standout
SlipChip
2009
Micromechanical bending of single collagen fibrils using atomic force microscopy
2007
The Hydrogen Bond in the Solid State
2002 Standout
A Bond Path: A Universal Indicator of Bonded Interactions
1998 Standout
Chemical Vapor Growth of One‐dimensional Magnetite Nanostructures
2008
Young s modulus measurements of silicon nanostructures using a scanning probe system: a non-destructive evaluation approach
2003
High-Q optomechanical GaAs nanomembranes
2011
Actuators for Active Flow Control
2011 Standout
Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review
2009 Standout
Fabrication of Topologically Complex Three-Dimensional Microstructures: Metallic Microknots
2000
A comprehensive review of solid particle erosion modeling for oil and gas wells and pipelines applications
2014 Standout
Surface stress in solids
1978 Standout
A method for elastic modulus measurements of magnetron sputtered thin films dedicated to mechanical applications
1995
Tribology on the macroscale to nanoscale of microelectromechanical system materials: A review
2001
Structure and Nanostructure in Ionic Liquids
2015 Standout
Electrospinning and Electrospun Nanofibers: Methods, Materials, and Applications
2019 Standout
3-D integration of RF circuits using Si micromachining
2001
Uniaxial Expansion of the 2D Ruddlesden–Popper Perovskite Family for Improved Environmental Stability
2019
The effect of anisotropic wet etching on the surface roughness parameters and micro/nanoscale friction behavior of Si(100) surfaces
2005
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
Effect of microfabrication processes on surface roughness parameters of silicon surfaces
2004
Metal–Organic Framework Materials as Chemical Sensors
2011 Standout
Time-resolved molecular imaging
2016 StandoutNobel
Photoinduced reactivity of titanium dioxide
2004 Standout
Advanced Thermoelectric Design: From Materials and Structures to Devices
2020 Standout
A new microtensile tester for the study of MEMS materials with the aid of atomic force microscopy
2002
MEMS actuators and sensors: observations on their performance and selection for purpose
2005
Strong, lightweight, and recoverable three-dimensional ceramic nanolattices
2014 StandoutScience
Solid-State Dewetting of Thin Films
2012
Interconnect fabrication processes and the development of low-cost wiring for CMOS products
1995
Quantum topology of molecular charge distributions. III. The mechanics of an atom in a molecule
1980
Application of MEMS force sensors for in situ mechanical characterization of nano-scale thin films in SEM and TEM
2002
Transport phenomena in nanofluidics
2008 Standout
Collagen Structure and Stability
2009 Standout
Design of multiphysics actuators using topology optimization – Part I: One-material structures
2001 Standout
Novel measurements of high-dynamic crystal strength by picosecond x-ray diffraction
1992
Detection of temperature- and stress-induced modifications ofLa Co O 3
2005 StandoutNobel
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
2016 Standout
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
Force measurements with the atomic force microscope: Technique, interpretation and applications
2005 Standout
Surface chemistry of atomic layer deposition: A case study for the trimethylaluminum/water process
2005 Standout
Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology
2004 Standout
On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour
2000 Standout
Multiple material additive manufacturing – Part 1: a review
2013
Nanostructured Plasmonic Sensors
2008 Standout
Insulator-metal transitions at microindentations
1992
Molecular Borromean Rings
2004 StandoutScienceNobel
Controlling the Synthesis and Assembly of Silver Nanostructures for Plasmonic Applications
2011 Standout
Cavity optomechanics
2014 Standout
3-D ICs: a novel chip design for improving deep-submicrometer interconnect performance and systems-on-chip integration
2001 Standout
Measurement of nanodisplacements and elastic properties of MEMS via the microscopic hole method
2005
Determination of elastic modulus of thin layers using nanoindentation
1997
Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: A model for predicting their yield strength
2006 Standout
Selected Examples of High‐Pressure Reactions in Glass Microreactors
2009
Soft Robotic Grippers
2018 Standout
Mechanical assessment of suspended ALD thin films by bulge and shaft-loading techniques
2013
A superelastic alloy microgripper with embedded electromagnetic actuators and piezoelectric force sensors: a numerical and experimental study
2005
Microstructure and mechanical properties of thermoelectric nanostructured n-type silicon-germanium alloys synthesized employing spark plasma sintering
2014
Recent progress in multiphoton microfabrication
2008
Chemical vapour deposition of coatings
2003
Silicon membrane nanofilters from sacrificial oxide removal
1999
Surface micromachining for microelectromechanical systems
1998
Focused ion beam induced deposition: fabrication of three-dimensional microstructures and Young's modulus of the deposited material
2000
Nanotribology and nanomechanics
2005
Magnetic Nanoparticles: Design and Characterization, Toxicity and Biocompatibility, Pharmaceutical and Biomedical Applications
2012 Standout
Residual stress and its role in failure
2007 Standout
Residual Stress Measurement on a MEMS Structure With High-Spatial Resolution
2007
A review of MEMS-based microscale and nanoscale tensile and bending testing
2003
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
2018 Standout
From weak to strong interactions: A comprehensive analysis of the topological and energetic properties of the electron density distribution involving X–H⋯F–Y systems
2002 Standout
Revealing Noncovalent Interactions
2010 Standout
Auxetic mechanical metamaterials
2017 Standout
Sample Dimensions Influence Strength and Crystal Plasticity
2004 StandoutScience
Design and fabrication of compliant micromechanisms and structures with negative Poisson's ratio
1997 Standout
Emerging Droplet Microfluidics
2017 Standout
Demonstration of superconducting micromachined cavities
2015 StandoutNobel
Morphological Control for High Performance, Solution‐Processed Planar Heterojunction Perovskite Solar Cells
2013 Standout
Mechanical testing of thin films
1994
Surface energy and surface stress tensor in an atomistic model
1976
Design and fabrication of zeolite-based microreactors and membrane microseparators
2001
Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication
1999 StandoutNature
FIB micromachined submicron thickness cantilevers for the study of thin film properties
2000
Influence of specimen dimensions and strain measurement methods on tensile stress–strain curves
2009
Works of Jan‐Åke Schweitz being referenced
Micromechanical Tensile Testing
1996
Template synthesis and forming electrical contacts to single Au nanowires by focused ion beam techniques
2006
Microfabrication of three-dimensional boron structures by laser chemical processing
1992
A generalized quantum virial equation
1977
Local stress relaxation phenomena in thin aluminum films
1991
Free-standing silicon microstructures fabricated by laser chemical processing
1993
Hole formation in thin aluminium films under controlled variation of strain and temperature
1991
Thick Polycristalline Silicon For Surface Micromechanical Applications: Deposition, Structuring And Mechanical Characterization
2005
A new and simple micromechanical approach to the stress-strain characterization of thin coatings
1991
Residual stresses and fracture properties of magnetron sputtered Ti films on Si microelements
1993
Assembling three-dimensional microstructures using gold-silicon eutectic bonding
1994
Hardness and fracture toughness of semiconducting materials studied by indentation and erosion techniques
1988
Mechanical Characterization of Thin Films by Micromechanical Techniques
1992
On-chip liquid storage and dispensing for lab-on-a-chip applications
2008
A classical virial theorem for open systems
1977
In situ tensile strength measurement and Weibull analysis of thick film and thin film micromachined polysilicon structures
1997
Design and fabrication of a gripping tool for micromanipulation
1996
The Design And Fabrication Of A Gripping Tool For Micromanipulation
2005
Micromechanical fracture strength of silicon
1990
Gallium arsenide as a mechanical material
1994
A generalized Morse function as cleavage potential
1971
Influence of surface coatings on elasticity, residual stresses, and fracture properties of silicon microelements
1989
Solid particle erosion — a statistical method for evaluation of strength properties of semiconducting materials
1987
Hardness, internal stress and fracture toughness of epitaxial AlxGa1−xAs films
1994
A metallic micropump for high-pressure microfluidics
2008
A polymeric paraffin actuated high-pressure micropump
2006
Fracture testing of silicon microelements i n s i t u in a scanning electron microscope
1988
Thick polycrystalline silicon for surface-micromechanical applications: deposition, structuring and mechanical characterization
1996