Standout Papers
Citation Impact
Citing Papers
Additive manufacturing of Ni-based superalloys: The outstanding issues
2016
X-Ray Microcomputed Tomography in Additive Manufacturing: A Review of the Current Technology and Applications
2018
Additive manufacturing and postprocessing of Ti-6Al-4V for superior mechanical properties
2016
Additive manufacturing of Ti6Al4V alloy: A review
2018 Standout
Metal additive manufacturing in aerospace: A review
2021 Standout
3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting
2019
An effective rule for translating optimal selective laser melting processing parameters from one material to another
2020
Effect of particle size distribution on the packing of powder beds: A critical discussion relevant to additive manufacturing
2020
Unraveling pore evolution in post-processing of binder jetting materials: X-ray computed tomography, computer vision, and machine learning
2020
Periodic cracking of films supported on compliant substrates
2011
Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction
2017
High-strength Damascus steel by additive manufacturing
2020 StandoutNature
Scientific, technological and economic issues in metal printing and their solutions
2019
Ultrafast X-ray imaging of laser–metal additive manufacturing processes
2018
Patterning by controlled cracking
2012 Nature
Drying of thin colloidal films
2013
Process-Structure Linkages Using a Data Science Approach: Application to Simulated Additive Manufacturing Data
2017
Grain structure control during metal 3D printing by high-intensity ultrasound
2020
Ultrasensitive mechanical crack-based sensor inspired by the spider sensory system
2014 StandoutNature
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
2016 Standout
Guided fracture of films on soft substrates to create micro/nano-feature arrays with controlled periodicity
2013
Controlled placement of colloidal quantum dots in sub-15 nm clusters
2013 StandoutNobel
3D printing of high-strength aluminium alloys
2017 StandoutNature
Laser additive manufacturing of metallic components: materials, processes and mechanisms
2012 Standout
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
2016 Standout
Effects of defects on mechanical properties in metal additive manufacturing: A review focusing on X-ray tomography insights
2019
Thermal Process Maps for Controlling Microstructure in Laser-Based Solid Freeform Fabrication
2003
Thermal and mechanical finite element modeling of laser forming from metal and ceramic powders
2003
A Parametric Study of Part Distortions in FDM Using 3D FEA
2006
Energy Harvesting From Human and Machine Motion for Wireless Electronic Devices
2008 Standout
A study of the microstructural evolution during selective laser melting of Ti–6Al–4V
2010 Standout
The role of heterogeneous deformation on damage nucleation at grain boundaries in single phase metals
2008
Physics of thin-film ferroelectric oxides
2005 Standout
Thickness-dependent phase evolution of polycrystalline Pb(Zr0.35Ti0.65)O3 thin films
2002
Investigation on reducing distortion by preheating during manufacture of aluminum components using selective laser melting
2013
Thermo-mechanical model development and validation of directed energy deposition additive manufacturing of Ti–6Al–4V
2014
Thermo-mechanical analysis of Wire and Arc Additive Layer Manufacturing process on large multi-layer parts
2011
Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
2017 Standout
Effect of path planning on the laser powder deposition process: thermal and structural evaluation
2010
End to end process evaluation for additively manufactured liquid rocket engine thrust chambers
2021
Metal Additive Manufacturing: A Review of Mechanical Properties
2016
Defect distribution and microstructure heterogeneity effects on fracture resistance and fatigue behavior of EBM Ti–6Al–4V
2016
A General Algorithm for Inverse Modeling of Layer-By-Layer Liquid-Metal Deposition
2009
An overview of Direct Laser Deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and control
2015
Three-dimensional transient finite element analysis for residual stresses in the laser aided direct metal/material deposition process
2005
An improved prediction of residual stresses and distortion in additive manufacturing
2016
Laser‐Based Additive Manufacturing Technologies for Aerospace Applications
2019
Critical instability at moving keyhole tip generates porosity in laser melting
2020 Science
Influence of position and laser power on thermal history and microstructure of direct laser fabricated Ti–6Al–4V samples
2005
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
2009 Standout
Geometry dependence of microstructure and microhardness for selective electron beam-melted Ti–6Al–4V parts
2016
Modeling and Experimental Verification of Transient/Residual Stresses and Microstructure Formation in Multi-Layer Laser Aided DMD Process
2005
An experimental–numerical investigation of heat distribution and stress field in single- and multi-track laser cladding by a high-power direct diode laser
2014
Measuring mechanical properties of coatings: a methodology applied to nano-particle-filled sol–gel coatings on glass
2002
In-time motion adjustment in laser cladding manufacturing process for improving dimensional accuracy and surface finish of the formed part
2004
Progress Towards Metal Additive Manufacturing Standardization to Support Qualification and Certification
2017
Non-destructive quality control methods in additive manufacturing: a survey
2020
Mechanical Properties and Microstructural Features of Direct Laser-Deposited Ti-6Al-4V
2015
Critical assessment of the fatigue performance of additively manufactured Ti–6Al–4V and perspective for future research
2015
Deposition Pattern Based Thermal Stresses in Single-Layer Laser Aided Direct Material Deposition Process
2006
Mechanisms controlling the durability of thermal barrier coatings
2001 Standout
Interfacial characterization of SLM parts in multi-material processing: Metallurgical diffusion between 316L stainless steel and C18400 copper alloy
2014
Strain relaxation in AlGaN/GaN superlattices grown on GaN
2001
Thermomechanical Modeling of Additive Manufacturing Large Parts
2014
Personal power systems
2005
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
Analytical modelling of residual stress in additive manufacturing
2016
Sustainable hydrocarbon fuels by recycling CO 2 and H 2 O with renewable or nuclear energy
2010 Standout
Multiscale Modeling of Powder Bed–Based Additive Manufacturing
2016
Relationship between strength and failure mode of ceramic multilayers
1998
Laser and Electron Beam Additive Manufacturing Methods of Fabricating Titanium Bone Implants
2017
The present and future of additive manufacturing in the aerospace sector: A review of important aspects
2015
Advanced Thermoelectric Design: From Materials and Structures to Devices
2020 Standout
Effects of HIP on microstructural heterogeneity, defect distribution and mechanical properties of additively manufactured EBM Ti-48Al-2Cr-2Nb
2017
Residual Stresses in Thermal Spray Coatings and Their Effect on Interfacial Adhesion: A Review of Recent Work
1996
Effects of Melt Pool Variables and Process Parameters in Laser Direct Metal Deposition of Aerospace Alloys
2010
Microstructure and performance optimisation of stainless steel formed by laser additive manufacturing
2016
Enhanced thermoelectric and mechanical properties of zone melted p-type (Bi,Sb)2Te3 thermoelectric materials by hot deformation
2014
Fabrication of NiTi through additive manufacturing: A review
2016
Feedstock powder processing research needs for additive manufacturing development
2018
Finite element analysis of the effect of volume shrinkage during laser densification
2005
Direct metal writing: Controlling the rheology through microstructure
2017
Deformation modelling in layered manufacturing of metallic parts using gas metal arc welding: effect of process parameters
2005
Role of geometry on properties of additively manufactured Ti-6Al-4V structures fabricated using laser based directed energy deposition
2016
Effects of process parameters on porosity in laser powder bed fusion revealed by X-ray tomography
2019
Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing
2018
Measurements of the Fracture Energy of Lithiated Silicon Electrodes of Li-Ion Batteries
2013
Additive manufacturing for steels: a review
2018
Strain-dependent electrical resistance of tin-doped indium oxide on polymer substrates
2000 Standout
Effects of laser sintering processing parameters on the microstructure and densification of iron powder
2003
Modeling metal deposition in heat transfer analyses of additive manufacturing processes
2014
As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting
2011
Sensing, modeling and control for laser-based additive manufacturing
2002
Metal Additive Manufacturing: A Review
2014 Standout
Residual stress and thermal cycling of planar solid oxide fuel cells
2007
Hybrid Processes in Additive Manufacturing
2017
Metal Additive Manufacturing Cycle in Aerospace Industry: A Comprehensive Review
2019
Effect of Nickel Oxide/Yttria‐Stabilized Zirconia Anode Precursor Sintering Temperature on the Properties of Solid Oxide Fuel Cells
2000
Direct laser deposition with different types of 316L steel particle: A comparative study of final part properties
2013
Review: The Impact of Metal Additive Manufacturing on the Aerospace Industry
2019
Selective Laser Melting of Aluminum and Titanium Matrix Composites: Recent Progress and Potential Applications in the Aerospace Industry
2020
Processing and Behavior of Fe-Based Metallic Glass Components via Laser-Engineered Net Shaping
2009
Residual stresses in LENS® components using neutron diffraction and contour method
2005
Solidification in direct metal deposition by LENS processing
2001
Three-dimensional finite element analysis simulations of the fused deposition modelling process
2006
3D printing of polymer matrix composites: A review and prospective
2016 Standout
In situ formation of substrate release mechanisms for gas metal arc weld metal 3-D printing
2015
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
Enhanced thermoelectric and mechanical properties in textured n-type Bi2Te3 prepared by spark plasma sintering
2007
Polydopamine and Its Derivative Materials: Synthesis and Promising Applications in Energy, Environmental, and Biomedical Fields
2014 Standout
A Review on Laser Powder Bed Fusion of Inconel 625 Nickel-Based Alloy
2019
Heat treatment of electron beam melted (EBM) Ti-6Al-4V: microstructure to mechanical property correlations
2018
Residual stresses in selective laser sintering and selective laser melting
2006 Standout
Polydopamine Surface Chemistry: A Decade of Discovery
2018 Standout
A comparison of fatigue strength sensitivity to defects for materials manufactured by AM or traditional processes
2016
A multiscale modeling approach for fast prediction of part distortion in selective laser melting
2015
Graphene based materials: Past, present and future
2011 Standout
Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review
2020
Oxides, porosity and fatigue performance of AlSi10Mg parts produced by selective laser melting
2016
Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
2015 Standout
A review of laser fabrication of metallic engineering components and of materials
2007
Low dielectric constant materials for microelectronics
2003 Standout
Solution-Processed Metal Nanowire Mesh Transparent Electrodes
2008 Standout
A Review of the As-Built SLM Ti-6Al-4V Mechanical Properties towards Achieving Fatigue Resistant Designs
2018
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
2015 Standout
Metallurgy, mechanistic models and machine learning in metal printing
2020
Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloys
2014
A mechanical assessment of flexible optoelectronic devices
2001
Laser Powder Bed Fusion of Stainless Steel Grades: A Review
2019
Laser sintering of polyamides and other polymers
2011 Standout
Silver Nanowire Networks as Flexible, Transparent, Conducting Films: Extremely High DC to Optical Conductivity Ratios
2009 Standout
Low cost integration of additive and subtractive processes for hybrid layered manufacturing
2010
A 3D dynamic numerical approach for temperature and thermal stress distributions in multilayer laser solid freeform fabrication process
2007
Thermal and stress modeling of multi-material laser processing
2001
Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
2012 Standout
Epitaxy and Microstructure Evolution in Metal Additive Manufacturing
2016
Three-dimensional numerical approach for geometrical prediction of multilayer laser solid freeform fabrication process
2006
Alternative anode materials for solid oxide fuel cells
2007 StandoutNobel
Killer notches: The effect of as-built surface roughness on fatigue failure in AlSi10Mg produced by laser powder bed fusion
2020
Mechanical properties and adhesion characteristics of hybrid sol–gel thin films
2004
Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging
2019 Science
Overview: Additive Manufacturing Enabled Accelerated Design of Ni-based Alloys for Improved Fatigue Life
2019
Alloy Negative Electrodes for Li-Ion Batteries
2014 Standout
On Predicting Nucleation of Microcracks Due to Slip-Twin Interactions at Grain Boundaries in Duplex Near γ-TiAl
2008
Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys
2017
Experimental and Numerical Study of the LENS Rapid Fabrication Process
2009
An overview of Direct Laser Deposition for additive manufacturing; Part I: Transport phenomena, modeling and diagnostics
2015
Effect of stress relaxation on distortion in additive manufacturing process modeling
2016
Strain relaxation in AlGaN under tensile plane stress
2000
Strain in cracked AlGaN layers
2002 StandoutNobel
Estimation of Melt Pool Dimensions, Thermal Cycle, and Hardness Distribution in the Laser-Engineered Net Shaping Process of Austenitic Stainless Steel
2011
Phonon mode behavior in strained wurtziteAl N ∕ Ga N
2005 StandoutNobel
Fatigue life of additively manufactured Ti–6Al–4V in the very high cycle fatigue regime
2016
On the Fatigue Performance of Additively Manufactured Ti-6Al-4V to Enable Rapid Qualification for Aerospace Applications
2016
3D printing of ceramics: A review
2018 Standout
An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel
2014
Residual stresses in components formed by the laserengineered net shaping (LENS®) process
2003
Residual stresses in LENS-deposited AISI 410 stainless steel plates
2008
The Effect of Deposition Patterns on the Deformation of Substrates During Direct Laser Fabrication
2013
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
The mechanical performance of DLC films on steel substrates
1998
On Process Temperature in Powder-Bed Electron Beam Additive Manufacturing: Model Development and Validation
2014
Influences of deposition strategies and oblique angle on properties of AISI316L stainless steel oblique thin-walled part by direct laser fabrication
2016
Residual stress via the contour method in compact tension specimens produced via selective laser melting
2014
Thermomechanical analysis of multi-bead pulsed laser powder deposition of a nickel-based superalloy
2011
Laser powder deposition
2009
Micron-Level Layer-Wise Surface Profilometry to Detect Porosity Defects in Powder Bed Fusion of Inconel 718
2018
Consolidation phenomena in laser and powder-bed based layered manufacturing
2007
A parametric study of part distortions in fused deposition modelling using three-dimensional finite element analysis
2008
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
2018 Standout
Additive manufacturing methods and modelling approaches: a critical review
2015 Standout
Fracture initiation/propagation parameters for duplex TiAl grain boundaries based on twinning, slip, crystal orientation, and boundary misorientation
2005
Hot isostatic pressing in metal additive manufacturing: X-ray tomography reveals details of pore closure
2020
An overview of powder granulometry on feedstock and part performance in the selective laser melting process
2017
Controlling of residual stress in additive manufacturing of Ti6Al4V by finite element modeling
2016
Microstructure Evolution, Tensile Properties, and Fatigue Damage Mechanisms in Ti-6Al-4V Alloys Fabricated by Two Additive Manufacturing Techniques
2015
Rapid tooling by laser powder deposition: Process simulation using finite element analysis
2005
An Algorithm for Inverse Modeling of Layer-by-Layer Deposition Processes
2008
Mechanistic models for additive manufacturing of metallic components
2020
The fracture of brittle thin films on compliant substrates in flexible displays
2002
A lightweight electromagnetic actuator for high voltage DC power grids
2019
Crystallographic texture engineering through novel melt strategies via electron beam melting: Inconel 718
2014
Effect of microstructure and defects on fatigue behaviour of directed energy deposited Ti–6Al–4V
2015
Structural engineering of polyurethane coatings for high performance applications
2007 Standout
Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
2012 Standout
High‐Performance Solution‐Processable Flexible SnSe Nanosheet Films for Lower Grade Waste Heat Recovery
2019
Additive manufacturing of metals
2016 Standout
A Review on Binder Jet Additive Manufacturing of 316L Stainless Steel
2019
Fatigue properties of a titanium alloy (Ti–6Al–4V) fabricated via electron beam melting (EBM): Effects of internal defects and residual stress
2016
Surface and Tribological Behaviors of the Bioinspired Polydopamine Thin Films under Dry and Wet Conditions
2013
Works of Jack Beuth being referenced
Thermal conductivity of metal powders for powder bed additive manufacturing
2018
The role of process variables in laser-based direct metal solid freeform fabrication
2001
Using machine learning to identify in-situ melt pool signatures indicative of flaw formation in a laser powder bed fusion additive manufacturing process
2018
Measurement and Modeling of Residual Stress-Induced Warping in Direct Metal Deposition Processes
1998
Melt Pool Size and Stress Control for Laser-Based Deposition Near a Free Edge
2003
Thermomechanical modeling of molten metal droplet solidification applied to layered manufacturing
1996
Transient Changes in Melt Pool Size in Laser Additive Manufacturing Processes
2004
Integrated melt pool and microstructure control for Ti–6Al–4V thin wall additive manufacturing
2014
Process Maps for Controlling Residual Stress and Melt Pool Size in Laser-Based SFF Processes 200
2000
Process Maps for Laser Deposition of Thin-Walled Structures
1999
Interfacial fracture testing of deposited metal layers under four-point bending
1997
Rapid Solidification: Selective Laser Melting of AlSi10Mg
2016
Process Maps for Predicting Residual Stress and Melt Pool Size in the Laser-Based Fabrication of Thin-Walled Structures
2006
Residual stress-driven delamination in deposited multi-layers
1996
Successive Deposition of Metals in Solid Freeform Fabrication Processes, Part 2: Thermomechanical Models of Adjacent Droplets
2000
Evaluating the Effect of Processing Parameters on Porosity in Electron Beam Melted Ti-6Al-4V via Synchrotron X-ray Microtomography
2016
Evaluation of Orientation Dependence of Fracture Toughness and Fatigue Crack Propagation Behavior of As-Deposited ARCAM EBM Ti-6Al-4V
2015
Process Mapping for Qualification Across Multiple Direct Metal Additive Manufacturing Processes
2013
Melt Pool Size Control in Thin-Walled and Bulky Parts via Process Maps
2001
Cracking of thin films bonded to elastic-plastic substrates
1996
A multi-scale convolutional neural network for autonomous anomaly detection and classification in a laser powder bed fusion additive manufacturing process
2018
Cracking of thin bonded films in residual tension
1992 Standout
Residual stress-induced warping in direct metal solid freeform fabrication
2002
Modeling and measurement of the notched strength of gamma titanium aluminides under monotonic loading
1999
Overview of Materials Qualification Needs for Metal Additive Manufacturing
2016
Controlling Melt Pool Dimensions Over a Wide Range of Material Deposition Rates in Electron Beam Additive Manufacturing
2010
Process Scaling and Transient Melt Pool Size Control in Laser-Based Additive Manufacturing Processes
2003
Prediction of lack-of-fusion porosity for powder bed fusion
2017
Scaling Effects in Laser-Based Additive Manufacturing Processes
2004
A Process Map for Consistent Build Conditions in the Solid Freeform Fabrication of Thin-Walled Structures
2000
Anomaly detection and classification in a laser powder bed additive manufacturing process using a trained computer vision algorithm
2017
Synchrotron-Based X-ray Microtomography Characterization of the Effect of Processing Variables on Porosity Formation in Laser Power-Bed Additive Manufacturing of Ti-6Al-4V
2017
An Investigation of Process Parameter Modifications on Additively Manufactured Inconel 718 Parts
2018
Localized Preheating Approaches for Reducing Residual Stress in Additive Manufacturing
2006
Location specific solidification microstructure control in electron beam melting of Ti-6Al-4V
2017
Integrated control of solidification microstructure and melt pool dimensions in electron beam wire feed additive manufacturing of Ti-6Al-4V
2014
Parametric analysis to quantify process input influence on the printed densities of binder jetted alumina ceramics
2019
Successive Deposition of Metals in Solid Freeform Fabrication Processes, Part 1: Thermomechanical Models of Layers and Droplet Columns
2000
Shape Deposition Manufacturing With Microcasting: Processing, Thermal and Mechanical Issues
1998