Citation Impact
Citing Papers
Additive Fertigung für Flugzeug-Strukturkomponenten
2019
Metal additive manufacturing in aerospace: A review
2021 Standout
Microstructural investigation of Selective Laser Melting 316L stainless steel parts exposed to laser re-melting
2011
Study on performance in dry milling aeronautical titanium alloy thin-wall components with two types of tools
2013
State of the art electrical discharge machining (EDM)
2003 Standout
Energy-Based Feature Extraction for Defect Diagnosis in Rotary Machines
2009
Dry drilling of alloy Ti–6Al–4V
2005
A review of cavitation in hydraulic machinery
2016 Standout
Effect of coolant strategy on tool performance, chip morphology and surface quality during high-speed machining of A356 aluminum alloy
2004
Milling of titanium alloy with cryogenic cooling and minimum quantity lubrication (MQL)
2017
Machining induced surface integrity in titanium and nickel alloys: A review
2010 Standout
Prognostics and Health Management: A Review of Vibration Based Bearing and Gear Health Indicators
2017 Standout
Machining and ecological effects of a new developed cutting fluid in combination with different cooling techniques on turning operation
2015
Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
2017 Standout
Effects and mechanisms in minimal quantity lubrication machining of an aluminum alloy
2005
A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement
2018 Standout
Literature review of Industry 4.0 and related technologies
2018 Standout
Selective laser melting additive manufacturing of Inconel 718 superalloy parts: Densification, microstructure and properties
2013
Turbomachinery component manufacture by application of electrochemical, electro-physical and photonic processes
2014
Technical, Economic and Environmental Review of the Lubrication/Cooling Systems Used in Machining Processes
2017
Application of sustainable techniques in metal cutting for enhanced machinability: a review
2015
Tool wear characteristics of binderless CBN tools used in high-speed milling of titanium alloys
2004
State Space Formulation of Nonlinear Vibration Responses Collected from a Dynamic Rotor-Bearing System: An Extension of Bearing Diagnostics to Bearing Prognostics
2017
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Minimal quantity lubrication-MQL in grinding of Ti–6Al–4V titanium alloy
2008
Review of selective laser melting: Materials and applications
2015 Standout
Cooling techniques for improved productivity in turning
2009
Digitalization of the EU Economies and People at Risk of Poverty or Social Exclusion
2020 Standout
Machining Ti–6Al–4V alloy with cryogenic compressed air cooling
2010
Manufacturing by combining Selective Laser Melting and Selective Laser Erosion/laser re-melting
2011
Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditions
2012
Environmental friendly cutting fluids and cooling techniques in machining: a review
2014 Standout
High-speed milling of titanium alloys using binderless CBN tools
2004
Seventy ways to make ceramics
2008
A comprehensive review of big data analytics throughout product lifecycle to support sustainable smart manufacturing: A framework, challenges and future research directions
2018 Standout
Tool Deflection Error of Three-Axis Computer Numerical Control Milling Machines, Monitoring and Minimizing by a Virtual Machining System
2015
Cavity Attenuators for Superconducting Qubits
2019 StandoutNobel
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
Artificial intelligence, machine learning and deep learning in advanced robotics, a review
2023 Standout
An overview of the machinability of aeroengine alloys
2003 Standout
Recent development in CNC machining of freeform surfaces: A state-of-the-art review
2010
Experimental investigations of vegetable based cutting fluids with extreme pressure during turning of AISI 304L
2011
Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids
2012 Standout
Energy conservation in manufacturing operations: modelling the milling process by a new complexity-based evolutionary approach
2015
Experimental and numerical studies on the performance of alloyed carbide tool in dry milling of aerospace material
2005
A general approach to simulating workpiece vibrations during five-axis milling of turbine blades
2010
Effect of MQL on Surface Roughness in Milling of AA7075-T6
2010
Toolpath dependent stability lobes for the milling of thin-walled parts
2008
Hybrid Processes in Additive Manufacturing
2017
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
2016 Standout
Laminated manufacturing and milling electrical discharge dressing of metal-bonded diamond grinding wheels
2011
Performance evaluation of Ti–6Al–4V grinding using chip formation and coefficient of friction under the influence of nanofluids
2014
High speed MQL finish-turning of Inconel 718 with different coated tools
2007
Surface reconstruction of porous substrates in sintered bronze by cw-high power diode laser
2012
A comprehensive experimental study on surface integrity by end milling Ti–6Al–4V
2008
Chatter in machining processes: A review
2011 Standout
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
Cooling techniques to improve the machinability and sustainability of light-weight alloys: A state-of-the-art review
2020 Standout
Evaluation of vegetable based cutting fluids with extreme pressure and cutting parameters in turning of AISI 304L by Taguchi method
2011
Artificial intelligence for automatic prediction of required surface roughness by monitoring wear on face mill teeth
2017
An intelligence evaluation method of the environmental impact for the cutting process
2019
The investigation of the influence of laser re‐melting on density, surface quality and microstructure of selective laser melting parts
2011
Three-dimensional stability lobe and maximum material removal rate in end milling of thin-walled plate
2008
Wire + Arc Additive Manufacturing
2015 Standout
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
2015 Standout
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
2016 Standout
A review on current research trends in electrical discharge machining (EDM)
2006 Standout
The sensitivity of Ni-based superalloy to hole making operations: Influence of process parameters on subsurface damage and residual stress
2008
State of the art in wire electrical discharge machining (WEDM)
2004
A Review of Sustainable Machining Engineering: Optimization Process Through Triple Bottom Line
2016
Eco-Friendly Cutting Fluids in Minimum Quantity Lubrication Assisted Machining: A Review on the Perception of Sustainable Manufacturing
2019
Tribological behaviour when face milling AISI 4140 steel with minimum quantity fluid application
2009
Machining of β-titanium-alloy Ti–10V–2Fe–3Al under cryogenic conditions: Cooling with carbon dioxide snow
2011
Investigating the Minimum Quantity Lubrication in grinding of Al2O3 engineering ceramic
2013
Laser beam machining—A review
2007 Standout
Productivity improvement through chatter-free milling in workshops
2011
Post Processing Methods used to Improve Surface Finish of Products which are Manufactured by Additive Manufacturing Technologies: A Review
2016
Finishing of SLS-Parts for Rapid Manufacturing (RM) - A Comprehensive Approach
2009
Metallic implant biomaterials
2014 Standout
Biodegradable Orthopedic Magnesium-Calcium (MgCa) Alloys, Processing, and Corrosion Performance
2012
Sound mapping for identification of stability lobe diagrams in milling processes
2008
Artificial Intelligence Monitoring of Hardening Methods and Cutting Conditions and Their Effects on Surface Roughness, Performance, and Finish Turning Costs of Solid-State Recycled Aluminum Alloy 6061 Сhips
2018
Light emission, chip morphology, and burr formation in drilling the bulk metallic glass
2004
On the higher-order semi-discretizations for periodic delayed systems
2008 Standout
Key improvements in the machining of difficult-to-cut aerospace superalloys
2005 Standout
Characterizing surface finish and fatigue behavior in binder-jet 3D-printed nickel-based superalloy 625
2018
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
ANN Surface Roughness Optimization of AZ61 Magnesium Alloy Finish Turning: Minimum Machining Times at Prime Machining Costs
2018
Surface integrity and tool life when turning Inconel 718 using ultra-high pressure and flood coolant systems
2008
Polymer‐Derived Ceramics: 40 Years of Research and Innovation in Advanced Ceramics
2010 Standout
Application of eco-friendly nanofluids during grinding of Inconel 718 through small quantity lubrication
2016
Application of Taguchi method to selection of optimal lubrication and cutting conditions in face milling of AlMg3
2010
Machining of 6061 aluminium alloy with MQL, dry and flooded lubricant conditions
2007
Assessing and comparing influencing factors of residual stresses in selective laser melting using a novel analysis method
2012 Standout
Comprehensive machining analysis to establish cryogenic LN2 and LCO2 as sustainable cooling and lubrication techniques
2020
Optimization of cutting fluids and cutting parameters during end milling by using D-optimal design of experiments
2012
Analysis of compliance between the cutting tool and the workpiece on the stability of a turning process
2007
Wavelets for fault diagnosis of rotary machines: A review with applications
2013 Standout
A review identifying the effectiveness of minimum quantity lubrication (MQL) during conventional machining
2017
Assessment of the machinability of Ti-6Al-4V alloy using the wear map approach
2008
Performances of different eco-friendly nanofluid lubricants in the milling of Inconel X-750 superalloy
2019
Morphology investigation on direct current pulsed gas tungsten arc welded additive layer manufactured Ti6Al4V alloy
2011
Machinability of Titanium Alloys.
2003
The metallurgy and processing science of metal additive manufacturing
2016 Standout
The Experimental and Theoretical Evaluation of an Indirect Cooling System for Machining
2010
Microstructure of Interpass Rolled Wire + Arc Additive Manufacturing Ti-6Al-4V Components
2015
Progress for sustainability in the mist assisted cooling techniques: a critical review
2020
Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
2012 Standout
Multi-Objective Optimization for Grinding of AISI D2 Steel with Al2O3 Wheel under MQL
2018
Surface integrity in material removal processes: Recent advances
2011 Standout
A comprehensive review on minimum quantity lubrication (MQL) in machining processes using nano-cutting fluids
2019
Additive manufacturing of metals
2016 Standout
Works of J.A. Sánchez being referenced
The milling of airframe components with low rigidity: A general approach to avoid static and dynamic problems
2005
Experimental and numerical investigation of the effect of spray cutting fluids in high speed milling
2005
Development of Optimum Electrodischarge Machining Technology for Advanced Ceramics
2001
Influence of EDM Parameters on Slot Machining in C1023 Aeronautical Alloy
2013
Influence of the WEDM process on the fatigue behavior of Inconel® 718
2016
Strategies for optimal use of fluids in grinding
2011
Using High Pressure Coolant in the Drilling and Turning of Low Machinability Alloys
2000
Selection of cutting conditions for a stable milling of flexible parts with bull-nose end mills
2007
Numerical prediction of heat affected layer in the EDM of aeronautical alloys
2012
The effect of ball burnishing on heat-treated steel and Inconel 718 milled surfaces
2006
Stability limits of milling considering the flexibility of the workpiece and the machine
2005
Electrical discharge truing of metal-bonded CBN wheels using single-point electrode
2007
Dry-dressing for ecological grinding
2016
Role of frozen lubricant film on tribological behaviour and wear mechanisms in grinding
2015
Machining evaluation of a hybrid MQL-CO2 grinding technology
2010
Toolpath selection based on the minimum deflection cutting forces in the programming of complex surfaces milling
2006
Electrode Set-Up for EDM-Drilling of Large Aspect-Ratio Microholes
2013
Model development for the prediction of surface topography generated by ball-end mills taking into account the tool parallel axis offset. Experimental validation
2008
The CAM as the centre of gravity of the five-axis high speed milling of complex parts
2005
Advanced cutting conditions for the milling of aeronautical alloys
2000
Recording of real cutting forces along the milling of complex parts
2005
Simultaneous Measurement of Forces and Machine Tool Position for Diagnostic of Machining Tests
2005
Cutting conditions and tool optimization in the high-speed milling of aluminium alloys
2001
Laser polishing of parts built up by selective laser sintering
2007
Complementary tribometers for the analysis of contact phenomena in grinding
2014
CO2 laser cutting of advanced high strength steels (AHSS)
2004
SEM and EDS Characterisation of Layering TiOxGrowth onto the Cutting Tool Surface in Hard Drilling Processes of Ti-Al-V Alloys
2011
Analysis of the electro discharge dressing (EDD) process of large-grit size cBN grinding wheels
2005