Citation Impact
Citing Papers
From High‐Entropy Alloys to High‐Entropy Steels
2015
Fundamentals and advances in magnesium alloy corrosion
2017 Standout
High-strength Damascus steel by additive manufacturing
2020 StandoutNature
Strategies for improving the sustainability of structural metals
2019 StandoutNature
The role of heat treatment on microstructure and mechanical properties of Ti–13Zr–13Nb alloy for biomedical load bearing applications
2011
Macrophages in immunoregulation and therapeutics
2023 Standout
Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation
2017 StandoutNature
Additively manufactured hierarchical stainless steels with high strength and ductility
2017 Standout
Corrosion degradation and prevention by surface modification of biometallic materials
2006
Mechanical and corrosion resistance of a new nanostructured Ti–Zr–Ta–Nb alloy
2011
Titanium surface characteristics, including topography and wettability, alter macrophage activation
2015
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
2016 Standout
Biocompatibility of Ti-alloys for long-term implantation
2012
Development of new metallic alloys for biomedical applications
2012 Standout
Control of Strain Hardening Behavior in High-Mn Austenitic Steels
2014
Recent developments in stainless steels
2009 Standout
Effect of layered microstructure on the superplasticity of friction stir processed AZ91 magnesium alloy
2018
A critical review of high entropy alloys and related concepts
2016 Standout
Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
2008 Standout
An effective stacking fault energy viewpoint on the formation of extended defects and their contribution to strain hardening in a Fe–Mn–Si–Al twinning-induced plasticity steel
2015
An Overview of Dual-Phase Steels: Advances in Microstructure-Oriented Processing and Micromechanically Guided Design
2015
Perspective on hetero-deformation induced (HDI) hardening and back stress
2019 Standout
Softening behavior by excessive twinning and adiabatic heating at high strain rate in a Fe–20Mn–0.6C TWIP steel
2015
Design of a novel Mn-based 1GPa duplex stainless TRIP steel with 60% ductility by a reduction of austenite stability
2011
Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys
2011 Standout
Electrochemically Driven Hydroxyapatite Nanoparticles Coating of Medical Implants
2016
Alloy Design, Combinatorial Synthesis, and Microstructure–Property Relations for Low-Density Fe-Mn-Al-C Austenitic Steels
2014
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
A re-evaluation of “The micromechanics of twinning in a TWIP steel”
2015
Review of selective laser melting: Materials and applications
2015 Standout
Microstructure and mechanical behaviour of Ti―6Al―7Nb alloy produced by selective laser melting
2011
On the correlation between indentation hardness and tensile strength in friction stir processed materials
2020
In situ heat treatment in selective laser melted martensitic AISI 420 stainless steels
2015
Degradable biomaterials based on magnesium corrosion
2008 Standout
Dilatometric characterization of pearlite dissolution in 0.1C-0.5Mn low carbon low manganese steel
1998
High-temperature structural intermetallics
2000 Standout
Carbothermal shock synthesis of high-entropy-alloy nanoparticles
2018 StandoutScience
Some aspects of the cyclic behavior of twinning-induced plasticity steels
2011
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
2016 StandoutNature
Influence of microstructural changes on corrosion behaviour of thermally aged Ti‐6Al‐7Nb alloy
2004
Crystal plasticity modeling of texture development and hardening in TWIP steels
2012
Size and orientation effects in partial dislocation-mediated deformation of twinning-induced plasticity steel micro-pillars
2015
A review of dynamic recrystallization phenomena in metallic materials
2016 Standout
Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures
2014 Standout
Steels for bearings
2011 Standout
Orientation dependence of twinning and strain hardening behaviour of a high manganese twinning induced plasticity steel with polycrystalline structure
2011
Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging
2011 Standout
Current state of Fe-Mn-Al-C low density steels
2017 Standout
Microstructural Evolution and Deformation Behavior of Ni-Si- and Co-Si-Containing Metastable High Entropy Alloys
2018
Development and characterization studies on magnesium alloy (RZ 5) surface metal matrix composites through friction stir processing
2018
Micromechanics of twinning in a TWIP steel
2015
Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution
2018 Standout
The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy
2013 Standout
Phase equilibria and thermodynamics of the Fe–Al–C system: Critical evaluation, experiment and thermodynamic optimization
2014
Calcium Phosphate Bioceramics: A Review of Their History, Structure, Properties, Coating Technologies and Biomedical Applications
2017 Standout
Recent Development in Friction Stir Processing as a Solid-State Grain Refinement Technique: Microstructural Evolution and Property Enhancement
2019
Refractory high-entropy alloys
2010 Standout
Revealing the microstructural evolution in a high entropy alloy enabled with transformation, twinning and precipitation
2019
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
2018 StandoutScience
Biodegradable metals
2014 Standout
Tunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys
2018
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
2015 Standout
Development and exploration of refractory high entropy alloys—A review
2018 Standout
Ab initio-guided design of twinning-induced plasticity steels
2016
On the effect of chemical composition on yield strength of TWIP steels
2017
Enhanced strength and ductility in a friction stir processing engineered dual phase high entropy alloy
2017
Corrosion of Al CoCrFeNi high-entropy alloys: Al-content and potential scan-rate dependent pitting behavior
2017 Standout
Strain hardening behavior and deformation substructure of Fe–20/27Mn–4Al–0.3C non-magnetic steels
2015
In-situ synthesizing carbon nanotubes on cement to develop self-sensing cementitious composites for smart high-speed rail infrastructures
2022 Standout
Chemical polishing of scaffolds made of Ti–6Al–7Nb alloy by additive manufacturing
2014
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Metallic implant biomaterials
2014 Standout
Micro-scale measurements of plastic strain field, and local contributions of slip and twinning in TWIP steels during in situ tensile tests
2016
Multi‐Principal‐Element Alloys with Improved Oxidation and Wear Resistance for Thermal Spray Coating
2004
Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi
2017
First-principles prediction of the deformation modes in austenitic Fe-Cr-Ni alloys
2016
Twinning-induced plasticity (TWIP) steels
2017 Standout
Designing Fe–Mn–Si alloys with improved low-cycle fatigue lives
2014
Ab initio assisted design of quinary dual-phase high-entropy alloys with transformation-induced plasticity
2017
Microstructure characterization of Alx CoCrCuFeNi high-entropy alloy system with multiprincipal elements
2005 Standout
Elastic properties of face-centred cubic Fe–Mn–C studied by nanoindentation and ab initio calculations
2012
Performance and Characterization of TWIP Steels for Automotive Applications
2013
Segregation engineering enables nanoscale martensite to austenite phase transformation at grain boundaries: A pathway to ductile martensite
2013
Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes
2004 Standout
A TRIP-assisted dual-phase high-entropy alloy: Grain size and phase fraction effects on deformation behavior
2017
High dislocation density–induced large ductility in deformed and partitioned steels
2017 StandoutScience
High-entropy alloys
2019 Standout
Iron-based shape memory alloy strips for strengthening RC members: Material behavior and characterization
2018 Standout
Possibilities for high-temperature strengthening in iron aluminides
1998
The metallurgy and processing science of metal additive manufacturing
2016 Standout
In-situ SEM observation of phase transformation and twinning mechanisms in an interstitial high-entropy alloy
2018
Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
2012 Standout
Additive manufacturing of metals
2016 Standout
Works of J.A. Jiménez being referenced
In vitro biocompatibility evaluation of surface‐modified titanium alloys
2009
Crystallization, phase evolution and corrosion of Fe-based metallic glasses: An atomic-scale structural and chemical characterization study
2014
Analysis of the microstructure evolution during tensile testing at room temperature of high-manganese austenitic steel
2009
Light-weight steels based on iron-aluminium - influence of micro alloying elements (B, Ti, Nb) on microstructures, textures and mechanical properties
2002
Temperature Dependent Deformation Mechanisms of a High Nitrogen-Manganese Austenitic Stainless Steel
2009
The influence of stacking fault energy on the microstructural and strain-hardening evolution of Fe–Mn–Al–Si steels during tensile deformation
2015
High temperature mechanical behaviour of δ–γ stainless steel
1999
Superplastic properties of a δ/γ stainless steel
2001
AFM and SEM characterization of non-toxic vanadium-free Ti alloys used as biomaterials
2003
Splitting phenomena occurring in the martensitic transformation of Cr13 and CrMoV14 stainless steels in the absence of carbide precipitation
1996
Surface characterization of new non-toxic titanium alloys for use as biomaterials
2001
Enhanced Mechanical Properties of a Novel High-Nitrogen Cr-Mn-Ni-Si Austenitic Stainless Steel via TWIP/TRIP Effects
2009
Nanoscale austenite reversion through partitioning, segregation and kinetic freezing: Example of a ductile 2GPa Fe–Cr–C steel
2012
Single crystal elastic constants of high-manganese transformation- and twinning-induced plasticity steels determined by a new method utilizing nanoindentation
2013
In vitro corrosion behaviour of titanium alloys without vanadium
2002
Creep behavior of intermetallic FeAl and FeAlCr alloys
1996
Soft x‐ray absorption spectroscopy study of oxide layers on titanium alloys
2002
Effect of temperature and strain rate on strain hardening and deformation mechanisms of high manganese austenitic steels
2010
Mechanical properties of ultra-fine grained AZ91 magnesium alloy processed by friction stir processing
2015
Corrosion study of surface-modified vanadium-free titanium alloys
2003
The influence of manganese content on the stacking fault and austenite/ε-martensite interfacial energies in Fe–Mn–(Al–Si) steels investigated by experiment and theory
2014
Oxidation behaviour of Al-alloyed ZrSi2 at 700°C
2000