Citation Impact
Citing Papers
A review of fuel cell systems for maritime applications
2016 Standout
Fundamentals and advances in magnesium alloy corrosion
2017 Standout
Brittle intermetallic compound makes ultrastrong low-density steel with large ductility
2015 Nature
Strategies for improving the sustainability of structural metals
2019 StandoutNature
Materials for fuel-cell technologies
2001 StandoutNature
Additively manufactured hierarchical stainless steels with high strength and ductility
2017 Standout
Laser additive manufacturing of metallic components: materials, processes and mechanisms
2012 Standout
Effect of self-implantation on structure and oxidation behavior of single crystal β-SiC
1993 StandoutNobel
Conversion of sewage sludge to clean solid fuel using hydrothermal carbonization: Hydrochar fuel characteristics and combustion behavior
2013 Standout
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
2006 Standout
Lignocellulosic biomass pyrolysis: A review of product properties and effects of pyrolysis parameters
2016 Standout
Near‐field measurements on contrail properties from fuels with different sulfur content
1997 StandoutNobel
Biomass combustion in fluidized bed boilers: Potential problems and remedies
2008
The alteration of oxidation and related properties of metals by ion implantation
1981
Microstructure and high-temperature sliding wear property of Coss/Co3Mo2Si metal silicide alloys
2005
The oxidation of titanium diboride and zirconium diboride at high temperatures
1968
The influence of yttrium additions on the oxide-scale adhesion to an iron-chromium-aluminum alloy
1976
A robust bi-layer separator with Lewis acid-base interaction for high-rate capacity lithium-ion batteries
2019 StandoutNobel
Coatings for blade and vane applications in gas turbines
1989 Standout
Reduced area specific resistance for iron-based metallic interconnects by surface oxide coatings
2001 StandoutNobel
The Art, Science, and Technology of Charcoal Production
2003 Standout
On the mechanics of delamination and spalling in compressed films
1984 Standout
Scanning photoemission microscopy of surfaces
1989 StandoutNobel
Alkali Metal Emission during Pyrolysis of Biomass
1997
Interfacial segregation during oxidation in O2 at 1173 K of CeO2-coated Fe-20Cr alloys
1990
On the Measurement of Strain in Coatings Formed on a Wrinkled Elastic Substrate
1998
Electrochemical versus Gas-Phase Oxidation of Ru Single-Crystal Surfaces
2000 StandoutNobel
Effect of interstitial solutes on the strength and ductility of titanium
1981
Hydrothermal Synthesis of Vanadium Oxides
1998 StandoutNobel
Fuel Sulfur Content, Sulfur-Oxide Emission and Corrosion in Oil Heating Plants
1991
Mechanisms controlling the durability of thermal barrier coatings
2001 Standout
Low-field magnetoresistance in metals
1976
Hot corrosion behavior of Co modified NiAl coating on nickel base superalloys
2012
Temperature Dependence of Aliovalent-Vanadium Doping in LiFePO4 Cathodes
2013 StandoutNobel
Localized vs Collective Descriptions of Magnetic Electrons
1968 StandoutNobel
Crystallization in anodic oxide films
1988
Intrinsic Surface Phonons in Porous Glass
1978 StandoutNobel
Photoelectrochemical microscopy of oxide films on metals: Ti/TiO2 interface
1988
Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments
2022 Standout
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
2016 StandoutNature
“Inner” and “outer” active surface of RuO2 electrodes
1990 Standout
High temperature corrosion of coatings and boiler steels in oxidizing chlorine-containing atmosphere
2003
The structure of an ultrathin VOx (x≈1) film grown epitaxially on TiO2 (110)
2000
Energy Bands of VO
1970
Corrosion of nickel, iron, cobalt and their alloys in molten salt electrolytes
1995
Microstructure, adhesion and growth kinetics of protective scales on metals and alloys
1982
Thermal Barrier Coatings for Gas-Turbine Engine Applications
2002 StandoutScience
A review of energy storage technologies for wind power applications
2012 Standout
Laser synthesizing NiAl intermetallic and TiC reinforced NiAl intermetallic matrix composite
2004
Electric and Magnetic Properties of “VO”
1966
Competition Between Stress Generation and Relaxation During Oxidation of an Fe-Cr-Al-Y Alloy
1998
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
2018 StandoutScience
Laser-clad Ni70Al20Cr7Hf3 alloys with extended solid solution of Hf: Part II. Oxidation behavior
1989
Perspectives on Titanium Science and Technology
2013 Standout
A study of ruthenium electrodes by cyclic voltammetry and X-ray emission spectroscopy
1978
Refractory Diborides of Zirconium and Hafnium
2007 Standout
Influence of temperature and sulphate ion on corrosion of mild steel in molten NaNo3
1992
Ash-related issues during biomass combustion: Alkali-induced slagging, silicate melt-induced slagging (ash fusion), agglomeration, corrosion, ash utilization, and related countermeasures
2015 Standout
Progress in metal-supported solid oxide fuel cells: A review
2010
Effects of blending hydrothermally treated municipal solid waste with coal on co-combustion characteristics in a lab-scale fluidized bed reactor
2012
Experimental observations in support of the dynamic-segregation theory to explain the reactive-element effect
1996
On the reasons for the effects of dispersions of stable oxides and additions of reactive elements on the adhesion and growth-mechanisms of chromia and alumina scales-the ?sulfur effect?
1987
Pilling-Bedworth ratio for oxidation of alloys
2000
The oxidation resistance and ignition temperature of AZ31 magnesium alloy with additions of La2O3 and La
2012
The modelling of growth stresses during high-temperature oxidation
1994
Uniform second Li ion intercalation in solid state ϵ-LiVOPO4
2016 StandoutNobel
A comparative review of biochar and hydrochar in terms of production, physico-chemical properties and applications
2015 Standout
Oxidation energies of transition metal oxides within theGGA + U
2006 Standout
Influence of fuel sulfur on the composition of aircraft exhaust plumes: The experiments SULFUR 1–7
2002 StandoutNobel
Logarithmic dependence of the low-field magnetoresistance inHg 3 − δ As F 6
1981 StandoutNobel
Theory of surface phonons in amorphous silica
1978 StandoutNobel
State of the art on high temperature thermal energy storage for power generation. Part 1—Concepts, materials and modellization
2009 Standout
Wrinkling of α-alumina films grown by thermal oxidation—I. Quantitative studies on single crystals of Fe–Cr–Al alloy
1998
Structure and Electrochemistry of Vanadium-Modified LiFePO4
2012 StandoutNobel
In Situ ESEM Investigation of KCl-Induced Corrosion of a FeCrAl and a Model FeNiCrAl Alloy in Lab Air at 450°C
2015
High‐Throughput Investigation of the Oxidation and Phase Constitution of Thin‐Film Ni–Al–Cr Materials Libraries
2015
Electrical Conductivity of Sintered Cr<SUB>2</SUB>O<SUB>3</SUB> Simultaneously Doped with NiO and Rare Earth Oxide at Low Oxygen Potential
1985
The surface science of titanium dioxide
2003 Standout
Compositional Effects on Aluminide Oxidation Performance: Objectives for Improved Bond Coats
2000
A room-temperature organometallic magnet based on Prussian blue
1995 StandoutNature
Review on concentrating solar power plants and new developments in high temperature thermal energy storage technologies
2015 Standout
High dislocation density–induced large ductility in deformed and partitioned steels
2017 StandoutScience
Vapor phase release of alkali species in the combustion of biomass pyrolysis oils
1994
Oxidation induced bending of metal foils
1974
A New Polymorph of VO2Prepared by Soft Chemical Methods
1998
Chemistry and Structure of Beta Silicon Carbide Implanted with High‐Dose Aluminum
1993 StandoutNobel
Neutron irradiation effects and structure of noncrystalline SiO2
1974
Stress generation during anodic oxidation of titanium and aluminum
1993
1984 Standout
Materials for lower temperature solid oxide fuel cells
2001
Vanadium solid-salt battery: Solid state with two redox couples
2010
Overview of current development in electrical energy storage technologies and the application potential in power system operation
2014 Standout
The influence of superficially applied oxide powders on the high-temperature oxidation behavior of Cr2O3-forming alloys
1982
Use of cerium and cerium oxide additions to improve high temperature oxidation behaviour of Fe–Cr alloys
1988
Growth and adhesion of oxide scales on Al2O3-forming alloys and coatings
1987
Mechanisms for Metal-Nonmental Transitions in Transition-Metal Oxides and Sulfides
1968
Porous Anodic Aluminum Oxide: Anodization and Templated Synthesis of Functional Nanostructures
2014 Standout
Works of J. Stringer being referenced
High temperature corrosion in fluidized bed combustion systems
1986
The effect of reactive element additions on the selective oxidation, growth and adhesion of chromia scales
1995
Stress generation and relief in growingoxide films
1970
Hot Corrosion of High-Temperature Alloys
1977
Stress Generation and Adhesion in Growing Oxide Scales
1972
The influence of alloying elements on the development and maintenance of protective scales
1995
High Temperature Corrosion of Aerospace Alloys.
1973
Oxidation of Vanadium in the Liquid Oxide Region
1966 Nature
Ordered intermetallic alloys: an assessment
1997
The high-temperature oxidation of cobalt-21 wt.% chromium-3 vol.% Y2O3 alloys
1972
The oxidation behaviour of cobalt-base alloys containing dispersed oxides formed by internal oxidation
1977
Oxidation of Na2SO4-coated cobalt base alloys
1975
Calculation of the Hall coefficient in the hexagonal Group II metals by the PFES method
1974
The effect of surface-applied reactive metal oxides on the high temperature oxidation of alloys
1987
Effect of Reactive Element Oxide Coatings on the High Temperature Oxidation Behavior of a FeCrAl Alloy
1992
Mixed oxidant high temperature corrosion in gasifiers and power plants
1997
Mechanisms of Na2SO4-induced accelerated oxidation
1975
The vanadium-oxygen system—a review
1965
The oxidation behavior of Fe-Cr alloys containing HFO2-dispersed phase
1981
Oxidation and hot corrosion of nickel-based alloys containing molybdenum
1976
The high-temperature oxidation of nickel-20 wt. % chromium alloys containing dispersed oxide phases
1972
The hot corrosion of cobalt-base alloys in a modified Dean's rig-I. CoCr, CoCrTa and CoCrTi alloys
1982
Improvements in oxidation resistance by dispersed oxide addition: Al2O3-forming alloys
1979
Application of the Plane-Faced-Energy-Surface Method to the Calculation of the Hall Effect in Hexagonal Alloy Phases
1973
Study of the effect of reactive-element addition by implanting metal ions in a preformed oxide layer
1991
The high temperature oxidation of CoCrAl alloys containing yttrium or hafnium additions
1977
High-temperature corrosion of superalloys
1987
The effect of internal stable nitride and oxide dispersion on the high temperature oxidation of FeCr alloys
1978
The influence of ion-implanted yttrium on the selective oxidation of chromium in Co-25 wt.% Cr
1988
The oxidation of titanium in oxygen at high temperatures
1960
The oxidation behaviour of austenitic FeCrNi alloys containing dispersed phases
1979
The effect of an Al2O3 dispersion on the adhesion of Al2O3 scales on aluminized Co-10% Cr alloys
1989
Effect of Surface‐Applied Reactive Element Oxide on the Oxidation of Binary Alloys Containing Cr
1987
The oxidation behavior of CoCrAI systems containing active element additions
1978