Citation Impact
Citing Papers
Formation, chemical evolution and solidification of the dense liquid phase of calcium (bi)carbonate
2024 StandoutNobel
Twinning-related grain boundary engineering
2004 Standout
A Review of Strain Analysis Using Electron Backscatter Diffraction
2011 Standout
Q‐ball imaging
2004 Standout
Crystallographic features of lath martensite in low-carbon steel
2006 Standout
Recent developments in stainless steels
2009 Standout
Effects of particles on development of microstructure and texture during rolling and recrystallisation in fcc alloys
1990
Orientation image-based micromechanical modelling of subgrain texture evolution in polycrystalline copper
2008
On the experimental characterization of crystal plasticity in polycrystals
2002
Study on the orientational stability of cube-oriented FCC crystals under plane strain by use of a texture component crystal plasticity finite element method
2004
Using texture components in crystal plasticity finite element simulations
2003
Improved representations of misorientation information for grain boundary science and engineering
2012
Computational modeling of f.c.c. deformation textures over Rodrigues' space
2000
Large strain deformation of Ni3Al + B: Part I. Microstructure and texture evolution during rolling
1993
Texture analysis with the new HIPPO TOF diffractometer
2003
Texture and Anisotropy
2002
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
2009 Standout
On the experimental characterization of crystal plasticity in polycrystals
2003
Multi-scale finite element analyses of sheet metals by using SEM-EBSD measured crystallographic RVE models
2006
Microstructural aspects of strain localization in AlMg alloys
1986
Investigation of contribution of {123} slip planes to development of rolling textures in bee metals by use of Taylor models
1995
Overview no. 76
1988
High-temperature structural intermetallics
2000 Standout
Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD
2010 Standout
The finite deformation of rate-dependent polycrystals—II: A comparison of the self-consistent and Taylor methods
1991
Large-scale 3D random polycrystals for the finite element method: Generation, meshing and remeshing
2011 Standout
A novel pole figure inversion method: specification of theMTEXalgorithm
2008
Viscoplasticity of heterogeneous metallic materials
2008
Texture Analysis with MTEX – Free and Open Source Software Toolbox
2010 Standout
A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals: Application to zirconium alloys
1993 Standout
A review of dynamic recrystallization phenomena in metallic materials
2016 Standout
Orientation density function-controlled pole probability density function measurements: automated adaptive control of texture goniometers
2007
Advances in Automatic EBSP Single Orientation Measurements
1993
A texture discretization technique adapted to polycrystalline aggregates with non-uniform grain size
2006
Friction stir welding and processing
2005 Standout
Contribution of {123} 〈111〉 slip systems to deformation of b.c.c. metals
1995
Perspectives on Titanium Science and Technology
2013 Standout
Texture evolution during tensile deformation of an austenitic stainless steel and its effect on the distribution of CSL boundaries
1995
Yield surfaces for textured polycrystals—I. Crystallographic approach
1987
Recrystallization texture development in commercial AlMnMg alloys
1996
Simulation of earing during deep drawing of an Al–3% Mg alloy (AA 5754) using a texture component crystal plasticity FEM
2006
Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
2012 Standout
A methodology for measuring and modeling crystallographic texture gradients in processed alloys
2001
Heterogeneity of crystallographic texture in friction stir welds of aluminum
2001
Concepts for Integrating Plastic Anisotropy into Metal Forming Simulations
2002
Random thoughts on non-random misorientation distributions
2006
High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships
2011 Standout
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Biomineralization: Integrating mechanism and evolutionary history
2022
Friction stir welding of aluminium alloys
2009 Standout
Microstructure-based crystal plasticity modeling of cyclic deformation of Ti–6Al–4V
2007
Distribution of grain boundaries in magnesia as a function of five macroscopic parameters
2003
Microstructures and properties of high-entropy alloys
2013 Standout
Principles of equal-channel angular pressing as a processing tool for grain refinement
2006 Standout
Physics and phenomenology of strain hardening: the FCC case
2002 Standout
Twinning-induced plasticity (TWIP) steels
2017 Standout
Characteristics of the ultrahyperbolic differential equation governing pole density functions
1999
Some microstructural aspects of the initial stage of recrystallization of highly rolled pure copper
1992
Texture modification, grain refinement and improved hardness/corrosion balance of a FeAl alloy by pulsed electron beam surface treatment in the “heating mode”
2008 Standout
The brass-type texture and its deviation from the copper-type texture
2008
Virtual material testing for stamping simulations based on polycrystal plasticity
2009
Unusual structural evolution in KCuF3
2013 StandoutNobel
On the reproducibility of the orientation distribution function of texture samples from pole figures (Ghost phenomena)
1979
Electron Backscatter Diffraction in Materials Science
2009 Standout
From geometry to dynamics of microstructure: using boundary lengths to quantify boundary misorientations and anisotropy
2003
Overview no. 76
1988 Standout
Texture and anisotropy
2004
Current issues in recrystallization: a review
1997 Standout
Rolling and recrystallization textures in directionally solidified aluminium
1987
A texture optimization study for minimum earing in aluminium by use of a texture component crystal plasticity finite element method
2003
Simulation of the rolling and shear texture of brass by the Taylor theory adapted for mechanical twinning
1978
Orientation imaging: The emergence of a new microscopy
1993
Simulation of rolling textures of b.c.c. metals considering grain interactions and crystallographic slip on {110}, {112} and {123} planes
1995
Works of J. Pośpiech being referenced
Deconvolution of Superposed Pole Figures by Discrete ODF Methods:Comparison of ADC and WIMV for Quartz and Calcite With TrigonalCrystal and Triclinic Specimen Symmetry
1994
The rolling textures of copper and α-brasses discussed in terms of the orientation distribution function
1975
Orientation distribution and orientation correlation functions for description of microstructures
1993
Demonstration of the Ghost Effect in the Presentation of the Orientation Distribution of Texturized Materials
1980
Reduction of Misorientations Between Two Cubic Crystals Into the Base Domain of Axis–Angle Space
1990
Development of Texture and Microstructure During Rolling of the Copper ‐ 8 Wt PCT Germanium Alloy
1991
The feasibility of the reproduction of the texture function by the vector method
1981
Crystallographic orientation inhomogeneity and crystal splitting in biogenic calcite
2013
Some Information on Quaternions Useful in Texture Calculations
1988
Statistical Analysis of Single Grain Orientation Data Generated from Model Textures
1994
Orientation and misorientation characteristics of annealed, rolled and recrystallized copper
1996
Symmetry in the Space of Euler Angles
1974
Estimation of the minimum number of single grain orientation measurements for ODF determination
1996
Behaviour of Statistical Texture Parameters Applied to Single Grain Orientation Measurements in Recrystallized Al-Mn
1994
Die Parameter der Drehung und die Orientierungsverteilungsfunktion (OVF)
1972
The Effect of Shear Bands on the Evolution of Rolling and Recrystallization Texture in Cold-Rolled Direct Chill Cast Strips of Brass
1998
The Misorientation Distribution Function
1983
Spatial arrangement of orientations in rolled copper
1983
Properties of Projection Lines in the Space of the Orientation Distribution Function
1988
On the Presentation of Orientation Distribution Functions by Model Functions
1986
The ODF Approximation From Pole Figures With the Aid of the ADCMethod
1991
On the problem of the reproduction of the true orientation distribution from pole figures
1981