Citation Impact
Citing Papers
Effect of Nano Silica De-agglomeration, and Methods of Adding Super-plasticizer on the Compressive Strength, and Workability of Nano Silica Concrete
2013
One-part alkali-activated materials: A review
2017 Standout
Recycling and recovery routes for incinerated sewage sludge ash (ISSA): A review
2013
Green remediation of contaminated sediment by stabilization/solidification with industrial by-products and CO2 utilization
2018
Stabilization/solidification of fly ashes and concrete production from bottom and circulating ashes produced in a power plant working under mono and co-combustion conditions
2011
Natural organic matter removal by coagulation during drinking water treatment: A review
2010 Standout
Chemical and physical properties of cyclone fly ash from the grate-fired boiler incinerating forest residues at a small municipal district heating plant (6MW)
2008
Extracting phosphorous from incinerated sewage sludge ash rich in iron or aluminum
2013 Standout
Recycling of sugarcane bagasse ash waste in the production of clay bricks
2012
Soil amendments for immobilization of potentially toxic elements in contaminated soils: A critical review
2019 Standout
The distribution of heavy metals during fluidized bed combustion of sludge (FBSC)
2007
Environmental and technical assessments of the potential utilization of sewage sludge ashes (SSAs) as secondary raw materials in construction
2013
Novel applications of red mud as coagulant, adsorbent and catalyst for environmentally benign processes
2008 Standout
Effects of nano-SiO2 and different ash particle sizes on sludge ash–cement mortar
2007
Innovative methodology for comprehensive utilization of iron ore tailings
2009 Standout
EU landfill waste acceptance criteria and EU Hazardous Waste Directive compliance testing of incinerated sewage sludge ash
2009
Factors affecting hazardous waste solidification/stabilization: A review
2006
A review of recent strategies for acid mine drainage prevention and mine tailings recycling
2018 Standout
Quick monitoring of pozzolanic reactivity of waste ashes
2009
Production of technical grade phosphoric acid from incinerator sewage sludge ash (ISSA)
2010
Early-age characteristics of red mud–coal gangue cementitious material
2009
Leachability and adverse effects of coal fly ash: A review
2020 Standout
Fading positive effect of biochar on crop yield and soil acidity during five growth seasons in an Indonesian Ultisol
2018 Standout
Traditional, state-of-the-art and renewable thermal building insulation materials: An overview
2019 Standout
Alkali-activated materials
2017 Standout
Research progress on CNTs/CNFs-modified cement-based composites – A review
2019 Standout
Effect of the Water to Binder Ratio and Ground Fly Ash on Properties of Recycled Aggregate Concrete
2011
Microstructural changes in alkali activated fly ash/slag geopolymers with sulfate exposure
2012
Particle size effect on the strength of rice husk ash blended gap-graded Portland cement concrete
2004
The effect of nanosilica addition on flowability, strength and transport properties of ultra high performance concrete
2014
Advances in understanding hydration of Portland cement
2015 Standout
Re-use of drinking water treatment plant (DWTP) sludge: Characterization and technological behaviour of cement mortars with atomized sludge additions
2009
Fly ash–limestone ternary cements: effect of component fineness
2011
Geopolymer concrete: A review of some recent developments
2015 Standout
A circular framework for the valorisation of sugar industry wastes: Review on the industrial symbiosis between sugar, construction and energy industries
2018
Magnetic separation of coal fly ash from Bulgarian power plants
2010
Mix-design Parameters and Real-life Considerations in the Pursuit of Lower Environmental Impact Inorganic Polymers
2017
Review of sewage sludge management: standards, regulations and analytical methods
2014 Standout
Performance enhancement of recycled concrete aggregate – A review
2015 Standout
Gypsum plaster waste recycling: A potential environmental and industrial solution
2017
Recent advancements in supercapacitor technology
2018 Standout
Life cycle, sustainability and the transcendent quality of building materials
2006
Characterization of Carbon Concentrates from Coal-Combustion Fly Ash
2001
Technological and environmental behavior of sewage sludge ash (SSA) in cement-based materials
2007
Utilisation perspective on water quenched and air-cooled blast furnace slags
2020
Freeze-thaw effect on the durability of binary cements containing activated coal-mining waste
2018
Effect of polycarboxylate superplasticizers on large amounts of fly ash cements
2013
Synthesis of geopolymer from spent FCC: Effect of SiO2/Al2O
2015
Recycling combustion ash for sustainable cement production: A critical review with data-mining and time-series predictive models
2016
A comprehensive review of big data analytics throughout product lifecycle to support sustainable smart manufacturing: A framework, challenges and future research directions
2018 Standout
A comprehensive review on the applications of coal fly ash
2014 Standout
Advances in understanding alkali-activated materials
2015 Standout
Principles and potential of the anaerobic digestion of waste-activated sludge
2008 Standout
Use of Bagasse Ash in Concrete and Its Impact on the Strength and Chloride Resistivity
2010
Properties of high-volume fly ash concrete incorporating nano-SiO2
2003
Solid Reactant-Based Geopolymers from Rice Hull Ash and Sodium Aluminate
2016
Recent development in the treatment of oily sludge from petroleum industry: A review
2013 Standout
Nanotechnology innovations for the construction industry
2013 Standout
Mechanical activation of volcanic ash for geopolymer synthesis: effect on reaction kinetics, gel characteristics, physical and mechanical properties
2016
Innovative methodologies for the utilisation of wastes from metallurgical and allied industries
2006
Processing of coal fly ash magnetic spheres for clay water flocculation
2017
Towards zero-waste valorisation of rare-earth-containing industrial process residues: a critical review
2015 Standout
Development of corn cob ash blended cement
2008 Standout
Recent advances in understanding the role of supplementary cementitious materials in concrete
2015
Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition
2014 Standout
A review on the utilization of fly ash
2009 Standout
Utilization of gold tailings as an additive in Portland cement
2006
Effect of nano-silica in concrete; a review
2021 Standout
Construction and built environment in circular economy: A comprehensive literature review
2021 Standout
Evaluation of the sulfate resistance of concrete containing palm oil fuel ash
2006
A review on the chemical, mechanical and microstructural characterization of carbon nanotubes-cement based composites
2017 Standout
Formaldehyde in the Indoor Environment
2010 Standout
Physico-chemical characterisation of Indian biomass ashes
2007
Management and valorisation of wastes through use in producing alkali‐activated cement materials
2016
Recycling food, agricultural, and industrial wastes as pore-forming agents for sustainable porous ceramic production: A review
2021 Standout
Effect of milling and acid washing on the pozzolanic activity of incinerator sewage sludge ash
2009
Sulfuric acid resistance of blended ash geopolymer concrete
2013
Reusing sewage sludge ash as adsorbent for copper removal from wastewater
2002
An overview of advances in biomass gasification
2016 Standout
Recycled aggregate from C&D waste & its use in concrete – A breakthrough towards sustainability in construction sector: A review
2014 Standout
Influences of CNT dispersion and pore characteristics on the electrical performance of cementitious composites
2016
Kissinger kinetic analysis of data obtained under different heating schedules
2008
Ultrafine grinding of sugar cane bagasse ash for application as pozzolanic admixture in concrete
2008
Ash-related issues during biomass combustion: Alkali-induced slagging, silicate melt-induced slagging (ash fusion), agglomeration, corrosion, ash utilization, and related countermeasures
2015 Standout
Influence of the atmosphere on the thermal decomposition kinetics of the CaCO3 content of PFBC coal flying ash
2006
Thermal and physical characteristics of polyester–scrap tire composites
2015
Supplementary cementitious materials
2011 Standout
A comprehensive overview about the influence of different admixtures and additives on the properties of alkali-activated fly ash
2013
Nanotechnology in concrete – A review
2010 Standout
Fire Resistance of Sewage Sludge Ash Blended Cement Pastes
2013
Improving the performance of ternary blended cements by mixing different types of fly ashes
2007
A review of the interference of carbon containing fly ash with air entrainment in concrete
2007
Activation of Metakaolin/Slag Blends Using Alkaline Solutions Based on Chemically Modified Silica Fume and Rice Husk Ash
2011
The effect of using thermally dried sewage sludge as an alternative fuel on Portland cement clinker production
2013
Beneficial role of nanosilica in cement based materials – A review
2013
Potassium-rich biomass ashes as activators in metakaolin-based inorganic polymers
2015
The possible use of sewage sludge ash (SSA) in the construction industry as a way towards a circular economy
2015
Understanding the Filler Effect on the Nucleation and Growth of C‐S‐H
2014 Standout
Influence of quicklime addition on the mechanical properties and hydration degree of blended cements containing different fly ashes
2007
A review of the multi-component utilisation of coal fly ash
2012 Standout
Hydration mechanisms of ternary Portland cements containing limestone powder and fly ash
2010 Standout
An overview of the composition and application of biomass ash. Part 1. Phase–mineral and chemical composition and classification
2012 Standout
Review Processing, properties and applications of reactive silica from rice husk—an overview
2003
An overview of the chemical composition of biomass
2009 Standout
Utilization of sewage sludge in EU application of old and new methods—A review
2006 Standout
The Utilization of Agricultural Waste as Agro-Cement in Concrete: A Review
2020
Approaches for a low-carbon production of building materials: A review
2019
Application of agro-waste for sustainable construction materials: A review
2012 Standout
Evaluation of blends of high and low calcium fly ashes for use as supplementary cementing materials
2004
Increasing Coal Fly Ash Use in Cement and Concrete Through Chemical Activation of Reactivity of Fly Ash
2003
Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of fly ash
2013 Standout
Towards circular economy implementation: a comprehensive review in context of manufacturing industry
2015 Standout
Characterisation of One-Part Geopolymer Binders Made from Fly Ash
2016
Dry powder alkali-activated slag cements
2015
Comprehensive utilization and environmental risks of coal gangue: A review
2019 Standout
ICTAC Kinetics Committee recommendations for performing kinetic computations on thermal analysis data
2011 Standout
State of the art review on Supplementary Cementitious Materials in India – I: An overview of legal perspective, governing organizations, and development patterns
2020
Evaluation of bagasse ash as supplementary cementitious material
2007
The reduction of indoor air pollutant from wood-based composite by adding pozzolan for building materials
2008
Reactive pozzolanas from rice husk ash: An alternative to cement for rural housing
2006
Feasibility of Eco-Friendly Binary and Ternary Blended Binders Made of Fly-Ash and Oil-Refinery Spent Catalyst in Ready-Mixed Concrete Production
2018
Works of J. Monzó being referenced
New geopolymeric binder based on fluid catalytic cracking catalyst residue (FCC)
2012
Properties and microstructure of alkali-activated red clay brick waste
2013
Determination of the pozzolanic activity of fluid catalytic cracking residue. Thermogravimetric analysis studies on FC3R–lime pastes
2003
Increase of the reactivity of densified silica fume by sonication treatment
2012
Mechanical and physical properties of cement blended with sewage sludge ash
2008
Reuse of sewage sludge ashes (SSA) in cement mixtures: the effect of SSA on the workability of cement mortars
2003
Mechanical treatments of fly ashes. Part III: Studies on strength development of ground fly ashes (GFA) — Cement mortars
1997
Pozzolanic reaction rate of fluid catalytic cracking catalyst residue (FC3R) in cement pastes
2013
A preliminary study of fly ash granulometric influence on mortar strength
1994
Comparisons among magnetic and non-magnetic fly ash fractions: Strength development of cement-fly ash mortars
1996
Effect of sonication on the reactivity of silica fume in Portland cement mortars
2011
Alkali activation of vitreous calcium aluminosilicate derived from glass fiber waste
2012
Alkaline Activation of Ceramic Waste Materials
2013
Use of sewage sludge ash(SSA)-cement admixtures in mortars
1996
Carbon footprint of geopolymeric mortar: study of the contribution of the alkaline activating solution and assessment of an alternative route
2014
Thermogravimetric Methods for Determining Carbon Content in Fly Ashes
1998
Cement equivalence factor evaluations for fluid catalytic cracking catalyst residue
2013
Mechanical behavior of mortars containing sewage sludge ash (SSA) and Portland cements with different tricalcium aluminate content
1999
Effect of sugar cane straw ash (SCSA) as solid precursor and the alkaline activator composition on alkali-activated binders based on blast furnace slag (BFS)
2017
Refluxed rice husk ash/NaOH suspension for preparing alkali activated binders
2013
Effect of pozzolans on the hydration process of Portland cement cured at low temperatures
2013
Loss on ignition and carbon content in pulverized fuel ashes (PFA): two crucial parameters for quality control
2002
Mechanical treatment of fly ashes
2000
Alkali activated materials based on fluid catalytic cracking catalyst residue (FCC): Influence of SiO2/Na2O and H2O/FCC ratio on mechanical strength and microstructure
2013
Physical and mechanical properties of foamed Portland cement composite containing crumb rubber from worn tires
2014
Assessment of the Pozzolanic Activity of a Spent Catalyst by Conductivity Measurement of Aqueous Suspensions with Calcium Hydroxide
2014
Physical, chemical and mechanical properties of fluid catalytic cracking catalyst residue (FC3R) blended cements
2001
Increasing the sustainability of alkali-activated binders: The use of sugar cane straw ash (SCSA)
2016
Rice straw ash: A potential pozzolanic supplementary material for cementing systems
2017
Assessment of sugar cane straw ash (SCSA) as pozzolanic material in blended Portland cement: Microstructural characterization of pastes and mechanical strength of mortars
2015
Structure of Portland Cement Pastes Blended with Sonicated Silica Fume
2012
Mechanical and durability properties of alkali-activated mortar based on sugarcane bagasse ash and blast furnace slag
2015
Design and properties of 100% waste-based ternary alkali-activated mortars: Blast furnace slag, olive-stone biomass ash and rice husk ash
2019
Early-strength development of portland cement mortars containing air classified fly ashes
1995
Assessment of pozzolanic/hydraulic reactivity of vitreous calcium aluminosilicate (VCAS)
2016
Determination of amorphous silica in rice husk ash by a rapid analytical method
2001
Effect of nanosilica-based activators on the performance of an alkali-activated fly ash binder
2012
Sugar‐cane bagasse ash (SCBA): studies on its properties for reusing in concrete production
2002
Preliminary Studies on the use of Sugar Cane Bagasse Ash (SCBA) in the Manufacture of Alkali Activated Binders
2014
Evaluation of the pozzolanic activity of fluid catalytic cracking catalyst residue (FC3R). Thermogravimetric analysis studies on FC3R-Portland cement pastes
2003
Advantages in the use of fly ashes in cements containing pozzolanic combustion residues: silica fume, sewage sludge ash, spent fluidized bed catalyst and rice husk ash
2002
Enhanced conductivity measurement techniques for evaluation of fly ash pozzolanic activity
2001
Mechanical treatment of fly ashes. Part I: Physico-chemical characterization of ground fly ashes
1995
Granulometric activation of densified silica fume (CSF) by sonication
2008
Mechanical treatment of fly ashes part II: Particle morphologies in ground fly ashes (GFA) and workability of GFA-cement mortars
1996
A new geopolymeric binder from hydrated-carbonated cement
2012
The use of thermogravimetric analysis technique for the characterization of construction materials
2008
Influence of different sized fractions of a fly ash on workability of mortars
1993
Fluid catalytic cracking catalyst residue (FC3R)
1999
Geopolymers based on spent catalyst residue from a fluid catalytic cracking (FCC) process
2013
Use of Slag/Sugar Cane Bagasse Ash (SCBA) Blends in the Production of Alkali-Activated Materials
2013
Vegetable ashes as Supplementary Cementitious Materials
2017
Compatibility of fluid catalytic cracking catalyst residue (FC3R) with various types of cement
2007
Study of the binary system fly ash/sugarcane bagasse ash (FA/SCBA) in SiO2/K2O alkali-activated binders
2016
Properties of Portland cement mortars incorporating high amounts of oil-fuel ashes
1999
Evaluation of the pozzolanic activity of spent FCC catalyst/fly ash mixtures in Portland cement pastes
2016