Citation Impact
Citing Papers
From Topology Optimization Design to Additive Manufacturing: Today’s Success and Tomorrow’s Roadmap
2019
Additive manufacturing of Ti6Al4V alloy: A review
2018 Standout
Metal additive manufacturing in aerospace: A review
2021 Standout
An effective rule for translating optimal selective laser melting processing parameters from one material to another
2020
Support Structures for Additive Manufacturing: A Review
2018 Standout
Additively manufactured hierarchical stainless steels with high strength and ductility
2017 Standout
Additive manufacturing of biomaterials
2017
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
2016 Standout
Antifouling Coatings: Recent Developments in the Design of Surfaces That Prevent Fouling by Proteins, Bacteria, and Marine Organisms
2010 Standout
Microstructure and mechanical properties of Ti‐6Al‐4V components fabricated by laser micro cladding deposition
2015
Laser material processing
2011 Standout
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
2016 Standout
Influence of microstructure on mechanical properties of laser metal wire-deposited Ti-6Al-4V
2016
Effect of directed energy deposition processing parameters on laser deposited Inconel® 718: Microstructure, fusion zone morphology, and hardness
2017
Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
2008 Standout
A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM)
2014
Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
2017 Standout
Adaptive path planning for wire-feed additive manufacturing using medial axis transformation
2016
A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement
2018 Standout
Effects of wire feed conditions on in situ alloying and additive layer manufacturing of titanium aluminides using gas tungsten arc welding
2014
A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing
2014
Effect of Building Height on Microstructure and Mechanical Properties of Big-Sized Ti-6Al-4V Plate Fabricated by Electron Beam Melting
2015
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Numerical Modeling of Heat Distribution in the Electron Beam Melting® of Ti-6Al-4V
2013
Wire-feed additive manufacturing of metal components: technologies, developments and future interests
2015 Standout
The MN+1AXN phases: A new class of solids
2000 Standout
The effect of location on the microstructure and mechanical properties of titanium aluminides produced by additive layer manufacturing using in-situ alloying and gas tungsten arc welding
2015
Laser processing of materials
2003 Standout
A comprehensive review of big data analytics throughout product lifecycle to support sustainable smart manufacturing: A framework, challenges and future research directions
2018 Standout
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
Microstructural modification of Ti–6Al–4V by using an in-situ printed heat sink in Electron Beam Melting® (EBM)
2015
Ceramic Coatings on Titanium Alloy by CO2Laser Treatment
1996
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
2014 Standout
As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting
2011
Metal Additive Manufacturing: A Review
2014 Standout
Laser surface nitriding of titanium and a titanium alloy
1996
Deposition of Ti–6Al–4V using laser and wire, part II: Hardness and dimensions of single beads
2011
Microstructural and Corrosion Evaluation of Laser Surface Nitrided Ti-13Nb-13Zr Alloy
2004
Materials for additive manufacturing
2017
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
2015 Standout
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
2016 Standout
Bead modelling and implementation of adaptive MAT path in wire and arc additive manufacturing
2015
Ceramic–metal composites produced by laser surface treatment
1989
Morphology, microstructure, and hardness of titanium (Ti-6Al-4V) blocks deposited by wire-feed additive layer manufacturing (ALM)
2011
The anisotropy of laser melting deposition additive manufacturing Ti–6.5Al–3.5Mo–1.5Zr–0.3Si titanium alloy
2014
Dissolution precipitation mechanism of TiC/Ti composite layer produced by laser cladding
2009
Laser beam machining—A review
2007 Standout
Remanufacture of Turbine Blades by Laser Cladding, Machining and In-Process Scanning in a Single Machine
2012
Fabricating Superior NiAl Bronze Components through Wire Arc Additive Manufacturing
2016
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Numerical modeling of microstructure evolution during laser additive manufacturing of a nickel-based superalloy
2014
In situ thermography for laser powder bed fusion: Effects of layer temperature on porosity, microstructure and mechanical properties
2019
An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel
2014
Multi-response design of Nd:YAG laser drilling of Ni-based superalloy sheets using Taguchi’s quality loss function, multivariate statistical methods and artificial intelligence
2010
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
Height control of laser metal-wire deposition based on iterative learning control and 3D scanning
2012
Laser powder deposition
2009
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
2018 Standout
Spatial and geometrical-based characterization of microstructure and microhardness for an electron beam melted Ti–6Al–4V component
2016
Additive manufacturing methods and modelling approaches: a critical review
2015 Standout
Crack path selection at the interface of wrought and wire+arc additive manufactured Ti–6Al–4V
2016
Wire based additive layer manufacturing: Comparison of microstructure and mechanical properties of Ti–6Al–4V components fabricated by laser-beam deposition and shaped metal deposition
2011
Controlling the microstructure and properties of wire arc additive manufactured Ti–6Al–4V with trace boron additions
2015
Mechanical properties of additive manufactured titanium (Ti–6Al–4V) blocks deposited by a solid-state laser and wire
2011
The metallurgy and processing science of metal additive manufacturing
2016 Standout
Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
2012 Standout
Additive manufacturing of metals
2016 Standout
Mechanical Properties of Additive Manufactured Ti-6Al-4V Using Wire and Powder Based Processes
2011
Magnesium based surface metal matrix composites by friction stir processing
2016
Works of J. Folkes being referenced
Concurrent Inconel 625 wire and WC powder laser cladding: process stability and microstructural characterisation
2013
Surface Modification and Coating with Lasers
1997
Deposition of Ti–6Al–4V using a high power diode laser and wire, Part II: Investigation on the mechanical properties
2008
Laser drilling of cooling holes in aeroengines: state of the art and future challenges
2004
Deposition of Ti–6Al–4V using a high power diode laser and wire, Part I: Investigation on the process characteristics
2008
A parametric study of Inconel 625 wire laser deposition
2013
Laser Surface Alloying of Titanium Substrates with Carbon and Nitrogen
1985
Cladding of pre-blended Ti–6Al–4V and WC powder for wear resistant applications
2011
Laser Deposition of Ti-6Al-4V Wire with WC Powder for Functionally Graded Components
2012
A simple methodology for predicting laser-weld properties from material and laser parameters
2011
Investigation of a 3D non‐contact measurement based blade repair integration system
2005
Fibre laser metal deposition with wire: parameters study and temperature monitoring system
2008