Standout Papers
Citation Impact
Citing Papers
The Collection 6 MODIS aerosol products over land and ocean
2013 Standout
The Tissue-Engineered Vascular Graft—Past, Present, and Future
2015 Standout
Irregularities induced by nonstructural masonry panels in framed buildings
1997
Numerical analysis of coronary artery bypass grafts: An over view
2012
Hydrogels in pharmaceutical formulations
2000 Standout
On the theory of semi‐implicit projection methods for viscous incompressible flow and its implementation via a finite element method that also introduces a nearly consistent mass matrix. Part 2: Implementation
1990
Boundary conditions for direct simulations of compressible viscous flows
1992 Standout
Modelling tailings dams and mine waste dumps failures
2002
A simple equation for description of solute release II. Fickian and anomalous release from swellable devices
1987 Standout
A parallel boundary fitted dynamic mesh solver for applications to flapping flight
2009
Computations on historic masonry structures
2002 Standout
ENTHALPY-POROSITY TECHNIQUE FOR MODELING CONVECTION-DIFFUSION PHASE CHANGE: APPLICATION TO THE MELTING OF A PURE METAL
1988 Standout
Pressure Correction Algebraic Splitting Methods for the Incompressible Navier--Stokes Equations
2005
Isogeometric collocation: Cost comparison with Galerkin methods and extension to adaptive hierarchical NURBS discretizations
2013
A micro-mechanical model for the homogenisation of masonry
2002
A Lagrangian reproducing kernel particle method for metal forming analysis
1998
Pseudo-divergence-free element free Galerkin method for incompressible fluid flow
2004
E pur si muove:Galilean-invariant cosmological hydrodynamical simulations on a moving mesh
2009 Standout
The physical properties of composite materials
1976
On the effect of spacing on the vortex-induced vibrations of two tandem cylinders
2008
Reproducing kernel particle methods
1995 Standout
On the simulation of flows with violent free surface motion
2006
Isogeometric analysis: An overview and computer implementation aspects
2015 Standout
The Theory of Composites
2002 Standout
Free and Moving Boundary Problems.
1986 Standout
Hexagonal ferrites: A review of the synthesis, properties and applications of hexaferrite ceramics
2012 Standout
Adaptive remeshing for transient problems
1989
On the theory of semi‐implicit projection methods for viscous incompressible flow and its implementation via a finite element method that also introduces a nearly consistent mass matrix. Part 1: Theory
1990
A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS)
2009 Standout
Damage Control for Clay Masonry Infills in the Design of RC Frame Structures
2012 Standout
Spontaneous rupture of thin liquid films due to thermocapillarity: A full-scale direct numerical simulation
1995
Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement
2005 Standout
Structural Analysis of Masonry Historical Constructions. Classical and Advanced Approaches
2010 Standout
Finite element methods for first-order hyperbolic systems with particular emphasis on the compressible euler equations
1984
IMMERSED BOUNDARY METHODS
2005 Standout
Review of Propulsion Applications of Detonation Waves
2000 Standout
On pressure boundary conditions for the incompressible Navier‐Stokes equations
1987
Sensitivity analysis of transfer functions of laminar flames
2011
Smoothed Particle Hydrodynamics (SPH): an Overview and Recent Developments
2010 Standout
NURBS‐enhanced finite element method (NEFEM)
2008
High efficiency detonation internal combustion engine (DICE)
1992
Numerical solution of saddle point problems
2005 Standout
Lagrangian-Eulerian finite element formulation for incompressible viscous flows
1981 Standout
Methods for predicting the thermal conductivity of composite systems: A review
1976 Standout
Recent progress in flapping wing aerodynamics and aeroelasticity
2010 Standout
A nested iterative scheme for indefinite linear systems in particulate flows
2004
A fixed grid numerical modelling methodology for convection-diffusion mushy region phase-change problems
1987 Standout
Cleaning the Air and Improving Health with Hydrogen Fuel-Cell Vehicles
2005 StandoutScience
Wind farms suitability location using geographical information system (GIS), based on multi-criteria decision making (MCDM) methods: The case of continental Ecuador
2017 Standout
Isogeometric Fluid–structure Interaction Analysis with Applications to Arterial Blood Flow
2006
A full-scale numerical study of interfacial instabilities in thin-film flows
1996
TREMURI program: An equivalent frame model for the nonlinear seismic analysis of masonry buildings
2013 Standout
Two circular cylinders in cross-flow: A review
2010 Standout
QUANTIFICATION OF UNCERTAINTY IN COMPUTATIONAL FLUID DYNAMICS
1997 Standout
Modelling urban and regional aerosols—I. model development
1994
Interaction between an elastic structure and free-surface flows: experimental versus numerical comparisons using the PFEM
2008
The extended/generalized finite element method: An overview of the method and its applications
2010
Finite element analysis of two- and three-dimensional flows around square columns in tandem arrangement
1998
An isogeometric design-through-analysis methodology based on adaptive hierarchical refinement of NURBS, immersed boundary methods, and T-spline CAD surfaces
2012
A numerical analysis of freezing and melting with convection
1981
Evaluation of Simplified Models for Lateral Load Analysis of Unreinforced Masonry Buildings
2002
A three-level finite element method for the instationary incompressible Navier–Stokes equations
2004
Cracking particles: a simplified meshfree method for arbitrary evolving cracks
2004 Standout
BASIC PRINCIPLES OF VIRTUAL ELEMENT METHODS
2012 Standout
Finite element methods for flow problems with moving boundaries and interfaces
2001
Prediction and control of combustion instabilities in real engines
2016 Standout
A gradient smoothing method (GSM) for fluid dynamics problems
2008
Long-scale evolution of thin liquid films
1997 Standout
A coupled homogenisation–damage model for masonry cracking
2004
Isogeometric analysis using T-splines
2009 Standout
Experimental investigation of dynamic pressure loads during dam break
2014 Standout
A dynamic model for rainfall-induced landslides on natural slopes
2003
Fundamentals of Atmospheric Modeling
2005
Discretizations in isogeometric analysis of Navier–Stokes flow
2011
Improving convergence in smoothed particle hydrodynamics simulations without pairing instability
2012 Standout
Landslide hazard and risk zonation—why is it still so difficult?
2005 Standout
The physical properties of composite materials
1976
Parameterizations for sulfuric acid/water nucleation rates
1998 Standout
Recommendations for the quantitative analysis of landslide risk
2013 Standout
Electrical and thermal conductivity of polymers filled with metal powders
2002 Standout
Three-Dimensional Simulation of Instabilities and Rivulet Formation in Heated Falling Films
1997
Detonative propulsion
2012 Standout
Works of J. Donéa being referenced
9. Pseudodynamic Capabilities of the ELSA Laboratory for Earthquake Testing of Large Structures
1996
Experimental and numerical methods in earthquake engineering
1991
Lagrangian and Eulerian Finite Element Techniques for Transient Fluid-Structure Interaction Problems
1977
Finite element solution of the unsteady Navier-Stokes equations by a fractional step method
1982
Finite element methods for nonlinear advection
1985
An analysis of time discretization in the finite element solution of hyperbolic problems
1987
Time‐accurate solution of stabilized convection–diffusion–reaction equations: I—time and space discretization
2002
The significance of chequerboarding in a Galerkin finite element solution of the Navier‐Stokes equations
1981
Letters to the editor
1982
An arbitrary lagrangian-eulerian finite element method for transient dynamic fluid-structure interactions
1982
A Taylor–Galerkin method for convective transport problems
1984
Thermal Conductivities Based on Variational Principles
1972
Finite Element Methods for Flow Problems
2003 Standout
Time-accurate solution of advection-diffusion problems by finite elements
1984
Advanced structural dynamics
1980