Citation Impact
Citing Papers
The disruption of bacterial membrane integrity through ROS generation induced by nanohybrids of silver and clay
2009 Standout
Properties of polystyrene and polymethyl methacrylate copolymers of polyhedral oligomeric silsesquioxanes: A molecular dynamics study
2005
Poly‐Lactic Acid: Production, Applications, Nanocomposites, and Release Studies
2010 Standout
Functionalized graphene sheets for polymer nanocomposites
2008 Standout
PEEK biomaterials in trauma, orthopedic, and spinal implants
2007 Standout
Applications of advanced hybrid organic–inorganic nanomaterials: from laboratory to market
2011 Standout
A review on the application of inorganic nano-structured materials in the modification of textiles: Focus on anti-microbial properties
2010 Standout
High-impact polystyrene/halloysite nanocomposites prepared by emulsion polymerization using sodium dodecyl sulfate as surfactant
2011
A review on polymer–layered silicate nanocomposites
2008 Standout
Ultrastrong and Stiff Layered Polymer Nanocomposites
2007 StandoutScience
Enabling nanotechnology with self assembled block copolymer patterns
2003 Standout
Biodegradable polymers and their layered silicate nanocomposites: In greening the 21st century materials world
2005 Standout
Thermal conductivity of polymer-based composites: Fundamentals and applications
2016 Standout
Polymer/Silica Nanocomposites: Preparation, Characterization, Properties, and Applications
2008 Standout
Analysis of the modulus of polyamide-6 silicate nanocomposites using moisture controlled variation of the matrix properties
2005
TPO based nanocomposites. Part 2. Thermal expansion behavior
2006
Composition dependence of the fracture toughness of heterogeneous polymer systems
1995
Fundamentals, processes and applications of high-permittivity polymer–matrix composites
2011 Standout
Characterization of tensile behaviour of hybrid short glass fibre/calcite particle/ABS composites
1998
Tensile properties of short-glass-fiber- and short-carbon-fiber-reinforced polypropylene composites
2000
Stiffness, Strength, and Ductility of Nanoscale Thin Films and Membranes: A Combined Wrinkling–Cracking Methodology
2011
Photoinitiated Polymerization: Advances, Challenges, and Opportunities
2010 Standout
Effects of fiber length and fiber orientation distributions on the tensile strength of short-fiber-reinforced polymers
1996
Synthesis, morphology, and viscoelastic properties of cyanate ester/polyhedral oligomeric silsesquioxane nanocomposites
2005
Symmetric diblock copolymers under large amplitude oscillatory shear flow: Entanglement effect
1995
Surface modification of inorganic nanoparticles for development of organic–inorganic nanocomposites—A review
2013 Standout
Liquid Exfoliation of Layered Materials
2013 StandoutScience
Effect of different compatibilisers on nanoclay dispersion, thermal stability, and burning behavior of polypropylene–nanoclay blends
2008
Selective laser sintering characteristics of nylon 6/clay-reinforced nanocomposite
2004
Thermal processing of hydroxyapatite reinforced polyetheretherketone composites
1999
Structure and properties of polypropylene-based nanocomposites: Effect of PP-g-MA to organoclay ratio
2007
On the use of nanocellulose as reinforcement in polymer matrix composites
2014 Standout
3D printing of polymer matrix composites: A review and prospective
2016 Standout
Properties and Applications of Polyvinyl Alcohol, Halloysite Nanotubes and Their Nanocomposites
2015 Standout
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
Biofibres and biocomposites
2007 Standout
Crystallization behavior and mechanical properties of polypropylene/halloysite composites
2007
Silver Nanoparticles: Synthesis, Characterization, Properties, Applications, and Therapeutic Approaches
2016 Standout
Polymer/layered silicate nanocomposites: a review from preparation to processing
2003 Standout
Tensile performance improvement of low nanoparticles filled-polypropylene composites
2002
Synthesis, Morphology, and Viscoelastic Properties of Polyhedral Oligomeric Silsesquioxane Nanocomposites with Epoxy and Cyanate Ester Matrices
2005
Factors Effecting the Performance of Montmorillonite/Magnesium Hydroxide/Poly(propylene) Ternary Composites, 1
2008
Carbon nanotube–polymer composites: Chemistry, processing, mechanical and electrical properties
2009 Standout
A review of recent developments in natural fibre composites and their mechanical performance
2015 Standout
Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling
2015 Standout
Influence of fibre length and concentration on the properties of glass fibre-reinforced polypropylene: Part 3. Strength and strain at failure
1996
Macroscopic analysis of interfacial properties of flax/PLLA biocomposites
2010
Highly oriented carbon fiber–polymer composites via additive manufacturing
2014 Standout
Recent Developments in the Chemistry of Cubic Polyhedral Oligosilsesquioxanes
2010 Standout
Polymer nanotechnology: Nanocomposites
2008 Standout
Polyamide 6—long glass fiber injection moldings
1995
The effect of the addition of silica particles on linear spherulite growth rate of isotactic polypropylene and its explanation by lamellar cluster model
2006
Laser sintering of polyamides and other polymers
2011 Standout
Mechanical properties of polypropylene composites
2011
Review article: Polymer-matrix Nanocomposites, Processing, Manufacturing, and Application: An Overview
2006 Standout
‘Green’ composites using cross-linked soy flour and flax yarns
2005
Thermo-viscoelastic properties of silica particulate-reinforced epoxy composites: Considered in terms of the particle packing model
2006
Composites of polyamide 6 and silicate nanotubes of the mineral halloysite: Influence of molecular weight on thermal, mechanical and rheological properties
2010
Polymer modification of bitumen: Advances and challenges
2014 Standout
Characterization of flax/epoxy prepregs before and after cure
2013
Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
2016
Applications of hybrid organic–inorganic nanocomposites
2005 Standout
Graphene-based polymer nanocomposites
2010 Standout
Influence of fibre length and concentration on the properties of glass fibre-reinforced polypropylene: 1. Tensile and flexural modulus
1996
The flexural modulus of misaligned short-fiber-reinforced polymers
1999
Experimental trends in polymer nanocomposites—a review
2004 Standout
Fracture mechanisms and fracture toughness in semicrystalline polymer nanocomposites
2006
Polymer/layered silicate (clay) nanocomposites: An overview of flame retardancy
2010 Standout
Recent advances in graphene based polymer composites
2010 Standout
On the elastic modulus of hybrid particle/short-fiber/polymer composites
2002
Features, Questions and Future Challenges in Layered Silicates Clay Nanocomposites with Semicrystalline Polymer Matrices
2007
Structural and mechanical properties of polymer nanocomposites
2006 Standout
Biocomposites reinforced with natural fibers: 2000–2010
2012 Standout
Recent advance in research on halloysite nanotubes-polymer nanocomposite
2014 Standout
Effects of halloysite nanotubes on kinetics and activation energy of non-isothermal crystallization of polypropylene
2009
Water‐assisted melt compounding of nylon‐6/pristine montmorillonite nanocomposites
2005
Fracture behavior of nanocomposites based on poly(ethylene-co-methacrylic acid) ionomers
2007
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
2018 Standout
Laser assisted additive manufacturing of continuous fiber reinforced thermoplastic composites
2017
Nucleation of Polypropylene Crystallization by Single-Walled Carbon Nanotubes
2002
Chemistry of Carbon Nanotubes
2006 Standout
Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites
2008 Standout
Processing technologies for poly(lactic acid)
2008 Standout
Small but strong: A review of the mechanical properties of carbon nanotube–polymer composites
2006 Standout
Mechanical properties of kenaf fibre reinforced polymer composite: A review
2014 Standout
Sub–10 nm polyamide nanofilms with ultrafast solvent transport for molecular separation
2015 StandoutScience
A review on additive manufacturing of polymer-fiber composites
2017 Standout
Polymer blends and composites from renewable resources
2006 Standout
Works of J. Denault being referenced
Fatigue propagation behaviour of polystyrene/polyethylene blends
1998
Mode I interlaminar crack propagation in continuous glass fiber/polypropylene composites: temperature and molding condition dependence
2003
Injection and compression molding of polystyrene/high‐density polyethylene blends—phase morphology and tensile behavior
1997
Toughness of Reinforced Ductile Thermoplastics
1992
Fatigue resistance of continuous glass fiber/polypropylene composites: consolidation dependence
2004
Crystallization and fiber/matrix interaction during the molding of PEEK/carbon composites
1992
The effects of injection molding on the mechanical behavior of long-fiber reinforced PBT/PET blends
1991
Motional perturbation at the microphase boundary in thermoplastic elastomers
1990
Tensile properties of injection molded long fiber thermoplastic composites
1989
Polyolefin nanocomposites: Formulation and development
2004
Fractographic interpretation of the fatigue crack propagation behavior of polystyrene and polystyrene/polyethylene blends
2001
Role of morphology and coupling agent in fracture performance of glass‐filled polypropylene
1988
Effect of crystallization on intercalation of clay‐polyolefin nanocomposites and their performance
2006
Fatigue resistance of continuous glass fiber/polypropylene composites: Temperature dependence
2004
The role of crystallinity and reinforcement in the mechanical behavior of polyamide‐6/clay nanocomposites
2002
Micro- and nano-structure in polypropylene/clay nanocomposites
2005