Citation Impact
Citing Papers
Fundamentals and advances in magnesium alloy corrosion
2017 Standout
Strategies for improving the sustainability of structural metals
2019 StandoutNature
Ultrahigh Charpy impact toughness (~450J) achieved in high strength ferrite/martensite laminated steels
2017
Development of new metallic alloys for biomedical applications
2012 Standout
Accident tolerant fuels for LWRs: A perspective
2013 Standout
Vacuum heat treatment of iron parts produced by selective laser melting: Microstructure, residual stress and tensile behavior
2013
Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
2017 Standout
Microstructure and tensile behavior of hybrid nano-micro SiC reinforced iron matrix composites produced by selective laser melting
2013
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Tensile deformation of a low density Fe–27Mn–12Al–0.8C duplex steel in association with ordered phases at ambient temperature
2013
Review of selective laser melting: Materials and applications
2015 Standout
Residual stresses in thermal barrier coatings: effects of interface asperity curvature/height and oxide thickness
2000
Microstructure and mechanical properties of a graded structural material
2014
Mechanisms controlling the durability of thermal barrier coatings
2001 Standout
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
2016 StandoutNature
Study on the microstructure and mechanical properties of multilayer Cu/Ni composite processed by accumulative roll bonding
2012
Current state of Fe-Mn-Al-C low density steels
2017 Standout
The effect of selected alloying element additions on properties of Mg-based alloy as bioimplants: A literature review
2013
Improvement in fatigue strength while keeping low Young's modulus of a β-type titanium alloy through yttrium oxide dispersion
2011
Effect of heat-treatment temperature on microstructures and mechanical properties of Co–Cr–Mo alloys fabricated by selective laser melting
2018
Microstructure and tensile properties of iron parts fabricated by selective laser melting
2013
Advanced oxidation-resistant iron-based alloys for LWR fuel cladding
2013
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Metallic implant biomaterials
2014 Standout
Deformation behaviour of iron-rich iron-aluminum alloys at low temperatures
2003
Wrinkling of α-alumina films grown by thermal oxidation—I. Quantitative studies on single crystals of Fe–Cr–Al alloy
1998
Double-ceramic-layer thermal barrier coatings of La2Zr2O7/YSZ deposited by electron beam-physical vapor deposition
2008
Fabrication and microstructure characterization of selective laser‐melted FeAl intermetallic parts
2012
Overview on advanced thermal barrier coatings
2010 Standout
Dissimilar friction stir welding of duplex stainless steel to low alloy structural steel
2015
High dislocation density–induced large ductility in deformed and partitioned steels
2017 StandoutScience
The metallurgy and processing science of metal additive manufacturing
2016 Standout
Nanolaminate transformation-induced plasticity–twinning-induced plasticity steel with dynamic strain partitioning and enhanced damage resistance
2014
Works of J. Chao being referenced
Evaluation of mechanical properties and biological response of an alumina-forming Ni-free ferritic alloy
2004
Toughness deterioration in advanced high strength bainitic steels
2009
Effect of residual stress on recrystallization behavior of mechanically alloyed steels
2009
Novel PLLA/magnesium composite for orthopedic applications: A proof of concept
2012
Obtaining good ductility in an FeAl intermetallic
2002
The influence of some microstructural and test parameters on the tensile behaviour and the ductility of a mechanically-alloyed Fe–40Al alloy
2001
Microstructure and fracture properties of an ultrahigh carbon steel–mild steel laminated composite
2003
The role of the surface roughness on the integrity of thermally generated oxide scales. Application to the Al2O3/MA956 system
1997
Phase separation in PM 2000™ Fe-base ODS alloy: Experimental study at the atomic level
2008
Influence of machining conditions on tensile stress and ductility of a mechanically alloyed Fe–40Al intermetallic
2002