Citation Impact
Citing Papers
Effects of fibre treatment on mechanical properties of kenaf fibre reinforced composites: a review
2019 Standout
Emerging Transparent Electrodes Based on Thin Films of Carbon Nanotubes, Graphene, and Metallic Nanostructures
2011 Standout
Characterization of a new natural fiber from Arundo donax L. as potential reinforcement of polymer composites
2014
Liquid crystal display and organic light-emitting diode display: present status and future perspectives
2017 Standout
Processing and characterization of natural cellulose fibers/thermoset polymer composites
2014
Large-scale pattern growth of graphene films for stretchable transparent electrodes
2009 StandoutNature
Pursuing prosthetic electronic skin
2016 Standout
Characterization of raw and alkali treated new natural cellulosic fibers from Tridax procumbens
2018 Standout
Metal halide perovskites for light-emitting diodes
2020 Standout
Polymer–Fullerene Bulk‐Heterojunction Solar Cells
2010 Standout
Roll-to-roll production of 30-inch graphene films for transparent electrodes
2010 Standout
Bio-inspired impact-resistant composites
2014
Bioinspired structural materials
2014 Standout
Hemp fiber and its composites – a review
2011 Standout
Traditional, state-of-the-art and renewable thermal building insulation materials: An overview
2019 Standout
Hemp Fiber-Reinforced 1-Pentene/Polypropylene Copolymer: The Effect of Fiber Loading on the Mechanical and Thermal Characteristics of the Composites
2008
Recent Development of Flax Fibres and Their Reinforced Composites Based on Different Polymeric Matrices
2013
A review on empirical mode decomposition in fault diagnosis of rotating machinery
2012 Standout
Flax fibre and its composites – A review
2013 Standout
Properties of natural fibre composites for structural engineering applications
2017 Standout
Wetting behaviour, moisture up-take and electrokinetic properties of lignocellulosic fibres
2006
Effects of the atmospheric plasma treatments on surface and mechanical properties of flax fiber and adhesion between fiber–matrix for composite materials
2012 Standout
A systematic investigation on the influence of the chemical treatment of natural fibers on the properties of their polymer matrix composites
2004
A Review on Natural Fiber Reinforced Polymer Composite and Its Applications
2015 Standout
Cross-sectional area evaluation and tensile properties of alkali-treated kenaf fibres
2013
Characterization of lignocellulosic curaua fibres
2008
Optimising industrial hemp fibre for composites
2006
In State of Art: Mechanical and tribological behaviour of polymeric composites based on natural fibres
2012
Novel engineered wood and bamboo composites for structural applications: State-of-art of manufacturing technology and mechanical performance evaluation
2020 Standout
Bamboo fibre reinforced biocomposites: A review
2012 Standout
Evaluation of mechanical and thermal properties of banana–flax based natural fibre composite
2014
Studies on lignocellulosic fibers of Brazil. Part II: Morphology and properties of Brazilian coconut fibers
2007
Hygromorphic materials for sustainable responsive architecture
2015 Standout
Engineering and evaluation of hemp fibre reinforced polypropylene composites: Micro-mechanics and strength prediction modelling
2008
Characterization of alkali treated and untreated new cellulosic fiber from Saharan aloe vera cactus leaves
2017
Characterisation of aluminium oxynitride gas barrier films
2001
Isora Fibres and their Composites with Natural Rubber
2004
Periodic motions of a dual-disc rotor system with rub-impact at fixed limiter
2008
Atomic Layer Deposition: An Overview
2009 Standout
Green composites: A review of adequate materials for automotive applications
2012 Standout
Thin-Film Permeation-Barrier Technology for Flexible Organic Light-Emitting Devices
2004
A review of bast fibres and their composites: Part 3 – Modelling
2012
Predicting the potential of agro waste fibers for sustainable automotive industry using a decision making model
2015 Standout
The effect of alkaline treatment on mechanical properties of kenaf fibers and their epoxy composites
2014
Material challenge for flexible organic devices
2006
A Review on Natural Fibre-Based Composites-Part I
2004
Experimental investigation of tuff masonry panels reinforced with surface bonded basalt textile-reinforced mortar
2016 Standout
Characterization and properties of natural fiber polymer composites: A comprehensive review
2017 Standout
Novel nanocomposite concept based on cross-linking of hyperbranched polymers in reactive cellulose nanopaper templates
2010
Gas Diffusion Barriers on Polymers Using Multilayers Fabricated by Al2O3 and Rapid SiO2 Atomic Layer Deposition
2008
Green composites: A review of material attributes and complementary applications
2013 Standout
Stability/degradation of polymer solar cells
2008 Standout
The potential of harakeke fibre as reinforcement in polymer matrix composites including modelling of long harakeke fibre composite strength
2015
Strain-dependent electrical resistance of tin-doped indium oxide on polymer substrates
2000 Standout
Hydrogel ionotronics
2018 Standout
Combined Multi-criteria Evaluation Stage Technique as an Agro Waste Evaluation Indicator for Polymeric Composites: Date Palm Fibers as a Case Study
2014 Standout
Enhancing the Fibre Matrix Adhesion of Natural Fibre Reinforced Polypropylene by Electron Radiation Analyzed with the Single Fibre Fragmentation Test
2010
Date palm fibers as polymeric matrix reinforcement: Fiber characterization
2005
Tensile behavior of New Zealand flax (Phormium tenax) fibers
2010
On the use of nanocellulose as reinforcement in polymer matrix composites
2014 Standout
New approach for extraction of cellulose from tucumã's endocarp and its structural characterization
2017 Standout
Influence of Bulky Organo‐Ammonium Halide Additive Choice on the Flexibility and Efficiency of Perovskite Light‐Emitting Devices
2018
Effect of surface treatments on interfacial properties of flax fiber-reinforced composites
2013
Biofibres and biocomposites
2007 Standout
Comparison of harakeke with hemp fibre as a potential reinforcement in composites
2014
Natural fibre composite energy absorption structures
2011
Tensile and interfacial properties of unidirectional flax/glass fiber reinforced hybrid composites
2013
A review of recent developments in natural fibre composites and their mechanical performance
2015 Standout
Flexible electronics under strain: a review of mechanical characterization and durability enhancement strategies
2015
Electromechanical Properties of Transparent Conducting Substrates for Flexible Electronic Displays
2005
Failure mechanisms in composites reinforced with unidirectional Phormium leaf fibre
2009
A review on dynamic mechanical properties of natural fibre reinforced polymer composites
2015 Standout
Experimental study on stress–strain relationships and failure mechanisms of parallel strand bamboo made from phyllostachys
2015
Effects of fluctuation of fibre orientation on tensile properties of flax sliver-reinforced green composites
2012
A review on the tensile properties of natural fiber reinforced polymer composites
2011 Standout
Morphological, thermal and mechanical characterization of okra (Abelmoschus esculentus) fibres as potential reinforcement in polymer composites
2009
Tensile Testing of Cellulose Based Natural Fibers for Structural Composite Applications
2009
Could biopolymers reinforced by randomly scattered flax fibre be used in structural applications?
2006
Date palm fibers as polymeric matrix reinforcement: DPF/polyester composite properties
2005
Mechanical properties of kenaf fiber reinforced concrete
2010
Pre-impregnated natural fibre-thermoplastic composite tape manufacture using a novel process
2017
Chemically Resistant, Shapeable, and Conducting Metal‐Organic Gels and Aerogels Built from Dithiooxamidato Ligand
2017
Reinforcing efficiency of nanocellulose in polymers
2014
Structure and properties of new natural cellulose fabrics from Cordia dichotoma
2011
Tensile properties of jute fibres
2009
Silane coupling agents used for natural fiber/polymer composites: A review
2010 Standout
Characterization of the thermo-mechanical behaviour of Hemp fibres intended for the manufacturing of high performance composites
2009
Artichoke (Cynara cardunculus L.) fibres as potential reinforcement of composite structures
2011
Biocomposites reinforced with natural fibers: 2000–2010
2012 Standout
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
2018 Standout
A Review of Natural Fibers Used in Biocomposites: Plant, Animal and Regenerated Cellulose Fibers
2015 Standout
Hypercrosslinked Polymer Gels as a Synthetic Hybridization Platform for Designing Versatile Molecular Separators
2022 StandoutNobel
Transfer of Large-Area Graphene Films for High-Performance Transparent Conductive Electrodes
2009 Standout
Quasi-Homogeneous Photocatalysis in Ultrastiff Microporous Polymer Aerogels
2024 StandoutNobel
The effect of alkali treatment under various conditions on physical properties of kenaf fiber
2017
Effect of various chemical treatments on the fibre structure and tensile properties of industrial hemp fibres
2011 Standout
Mechanical properties of kenaf fibre reinforced polymer composite: A review
2014 Standout
A review on additive manufacturing of polymer-fiber composites
2017 Standout
Kenaf Bast Fiber Bundle–Reinforced Unsaturated Polyester Composites. III: Statistical Strength Characteristics and Cost-Performance Analyses
2010
Works of J. Andersons being referenced
Estimation of the tensile strength of an oriented flax fiber-reinforced polymer composite
2011
Modeling the non-linear deformation of a short-flax-fiber-reinforced polymer composite by orientation averaging
2013
Strength and adhesion characteristics of elementary flax fibres with different surface treatments
2003
Ultimate strain and deformability of elementary flax fibres
2011
Glass fibre strength distribution determined by common experimental methods
2002
Adhesion of silicon oxide layers on poly (ethylene terephthalate). II: Effect of coating thickness on adhesive and cohesive strengths
1997
Biaxial fragmentation of thin silicon oxide coatings on poly(ethylene terephthalate)
2001
Analysis of the initial fragmentation stage of oxide coatings on polymer substrates under biaxial tension
2003
A family of weakest link models for fiber strength distribution
2006
The effect of mechanical defects on the strength distribution of elementary flax fibres
2009
Interfacial shear strength of flax fibers in thermoset resins evaluated via tensile tests of UD composites
2012
Modeling the effect of reinforcement discontinuity on the tensile strength of UD flax fiber composites
2011
Modeling strength scatter of elementary flax fibers: The effect of mechanical damage and geometrical characteristics
2011
Adhesion of silicon oxide layers on poly(ethylene terephthalate). I: Effect of substrate properties on coating's fragmentation process
1997
Evaluation of toughness by finite fracture mechanics from crack onset strain of brittle coatings on polymers
2007
Modeling elastic properties of short flax fiber-reinforced composites by orientation averaging
2010
Anisotropy of the stiffness and strength of rigid low-density closed-cell polyisocyanurate foams
2015
Interfacial shear strength of flax fiber/thermoset polymers estimated by fiber fragmentation tests
2005
Stiffness and strength of flax fiber/polymer matrix composites
2006
Overcritical high-speed rotor systems, full annular rub and accident
2005
Strength distribution of elementary flax fibres
2004
Dependence of fracture toughness of composite laminates on interface ply orientations and delamination growth direction
2004