Citation Impact
Citing Papers
From High‐Entropy Alloys to High‐Entropy Steels
2015
Microstructural evolution and corrosion behavior of Al25Ti25Ga25Be25 equi‐molar composition alloy
2013
Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures
2016
Thermal activation parameters of plastic flow reveal deformation mechanisms in the CrMnFeCoNi high-entropy alloy
2017
Strong and Ductile Non-equiatomic High-Entropy Alloys: Design, Processing, Microstructure, and Mechanical Properties
2017
The NLRP3 inflammasome is activated by nanoparticles through ATP, ADP and adenosine
2015
Accelerated exploration of multi-principal element alloys with solid solution phases
2015
Role of powder particle size on laser powder bed fusion processability of AlSi10mg alloy
2020
Introduction to the Additive Manufacturing Powder Metallurgy Supply Chain
2015
Effect of direct laser re-melting processing parameters and scanning strategies on the densification of tool steels
2005
Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi
2015
Local Structure and Short-Range Order in a NiCoCr Solid Solution Alloy
2017
Small-scale soft-bodied robot with multimodal locomotion
2018 StandoutNature
High-strength Damascus steel by additive manufacturing
2020 StandoutNature
Strategies for improving the sustainability of structural metals
2019 StandoutNature
The NLRP3 inflammasome: molecular activation and regulation to therapeutics
2019 Standout
Strengthening in multi-principal element alloys with local-chemical-order roughened dislocation pathways
2019
Li-alloy based anode materials for Li secondary batteries
2010 Standout
Exceptionally high cavitation erosion and corrosion resistance of a high entropy alloy
2017
A Promising New Class of High-Temperature Alloys: Eutectic High-Entropy Alloys
2014
Challenges Facing Lithium Batteries and Electrical Double‐Layer Capacitors
2012 Standout
Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy
2017
Differences of crystal structure and dynamics between a soft porous nanocrystal and a bulk crystal
2011 StandoutNobel
Additively manufactured hierarchical stainless steels with high strength and ductility
2017 Standout
Ti2NiCoSnSb - a new half-Heusler type high-entropy alloy showing simultaneous increase in Seebeck coefficient and electrical conductivity for thermoelectric applications
2019
Hydrogen enhances strength and ductility of an equiatomic high-entropy alloy
2017
Polymorphism in a high-entropy alloy
2017
Size effect, critical resolved shear stress, stacking fault energy, and solid solution strengthening in the CrMnFeCoNi high-entropy alloy
2016
Processing of Bulk Metallic Glass
2009 Standout
Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes
2018 Nature
TiZrNbTaMo high-entropy alloy designed for orthopedic implants: As-cast microstructure and mechanical properties
2016
Entropy-stabilized oxides
2015 Standout
High pressure synthesis of a hexagonal close-packed phase of the high-entropy alloy CrMnFeCoNi
2017
Dislocation mechanisms and 3D twin architectures generate exceptional strength-ductility-toughness combination in CrCoNi medium-entropy alloy
2017
Bioinspired structural materials
2014 Standout
Laser additive manufacturing of metallic components: materials, processes and mechanisms
2012 Standout
Laser material processing
2011 Standout
Mechanically driven alloying of immiscible elements
1992
Anomalous solidification microstructures in Co-free AlxCrCuFeNi2 high-entropy alloys
2013
Influence of compositional inhomogeneity on mechanical behavior of an interstitial dual-phase high-entropy alloy
2017
Synthesis and properties of multiprincipal component AlCoCrFeNiSix alloys
2010
Progress in High-Entropy Alloys
2013
Annealing on the structure and properties evolution of the CoCrFeNiCuAl high-entropy alloy
2009
A critical review of high entropy alloys and related concepts
2016 Standout
Microstructure of (Hf-Ta-Zr-Nb)C high-entropy carbide at micro and nano/atomic level
2018
Compressive creep behavior of selective laser melted CoCrFeMnNi high-entropy alloy strengthened by in-situ formation of nano-oxides
2020
Criteria for Predicting the Formation of Single-Phase High-Entropy Alloys
2015
Microstructure and compressive properties of multiprincipal component AlCoCrFeNiCx alloys
2010
Novel microstructure and properties of multicomponent CoCrCuFeNiTix alloys
2006
Modeling of high entropy alloys of refractory elements
2012
Fabrication of NiCr alloy parts by selective laser melting: Columnar microstructure and anisotropic mechanical behavior
2013
Empirical design of single phase high-entropy alloys with high hardness
2014
Searching for Next Single-Phase High-Entropy Alloy Compositions
2013
Effect of vanadium addition on the microstructure and properties of AlCoCrFeNi high entropy alloy
2014
Effect of elemental interaction on microstructure and mechanical properties of FeCoNiCuAl alloys
2012
Microstructural evolution after thermomechanical processing in an equiatomic, single-phase CoCrFeMnNi high-entropy alloy with special focus on twin boundaries
2014
Effect of rare earth Y addition on the microstructure and mechanical properties of high entropy AlCoCrCuNiTi alloys
2009
Microstructure and properties of age-hardenable AlxCrFe1.5MnNi0.5 alloys
2010
Six-degree-of-freedom magnetic actuation for wireless microrobotics
2015
Design of a twinning-induced plasticity high entropy alloy
2015
Effect of Mn and V on structure and mechanical properties of high-entropy alloys based on CoCrFeNi system
2014
Thermodynamics of concentrated solid solution alloys
2017
High energy ball-milled Ti2RuFe electrocatalyst for hydrogen evolution in the chlorate industry
1997
Mechanical properties of refractory high-entropy alloys: Experiments and modeling
2016
Ultrastrong Medium‐Entropy Single‐Phase Alloys Designed via Severe Lattice Distortion
2018
Recent Advances on High‐Entropy Alloys for 3D Printing
2020
Single-phase high-entropy alloys – an overview
2014
Evolution of Microstructures and Properties of the Al<sub>x</sub>CrCuFeNi<sub>2</sub> High-Entropy Alloys
2013
Rapid Manufacturing Metal Parts by Laser Sintering Admixture of Epoxy Resin/Iron Powders
2006
Selective laser melting additive manufacturing of Inconel 718 superalloy parts: Densification, microstructure and properties
2013
Processing conditions and microstructural features of porous 316L stainless steel components by DMLS
2008
Mechanical and Corrosion Properties of Additively Manufactured CoCrFeMnNi High Entropy Alloy
2019
Deformation-driven bidirectional transformation promotes bulk nanostructure formation in a metastable interstitial high entropy alloy
2019
Phase stability and tensile properties of Co-free Al0.5CrCuFeNi2 high-entropy alloys
2013
High-Entropy Alloys with a Hexagonal Close-Packed Structure Designed by Equi-Atomic Alloy Strategy and Binary Phase Diagrams
2014
Surface roughness analysis, modelling and prediction in selective laser melting
2012
Temperature dependent stacking fault energy of FeCrCoNiMn high entropy alloy
2015
Alloying effect on the elastic properties of refractory high-entropy alloys
2016
Design of high entropy alloys: A single-parameter thermodynamic rule
2015
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Stability and structure prediction of cubic phase in as cast high entropy alloys
2013
Microstructures and mechanical properties of Al CrFeNiTi0.25 alloys
2014
Equilibrium phase of high-entropy FeCoNiCrCu0.5 alloy at elevated temperature
2009
Beating hydrogen with its own weapon: Nano-twin gradients enhance embrittlement resistance of a high-entropy alloy
2018
Microstructure and mechanical properties of in-situ MC-carbide particulates-reinforced refractory high-entropy Mo0.5NbHf0.5ZrTi matrix alloy composite
2015
Phase selection rules for cast high entropy alloys: An overview
2015
Hot deformation characteristics and dynamic recrystallization of the MoNbHfZrTi refractory high-entropy alloy
2015
B 2 structure of high-entropy alloys with addition of Al
2008
Microstructure and corrosion properties of CrMnFeCoNi high entropy alloy coating
2016
Factor analysis of selective laser melting process parameters and geometrical characteristics of synthesized single tracks
2012
Determination of the transition to the high entropy regime for alloys of refractory elements
2012
Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase
2011 Standout
Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium
2012
Thermoelectric performance of PbSnTeSe high-entropy alloys
2016
Effects of annealing treatment on phase composition and microstructure of CoCrFeNiTiAl high-entropy alloys
2011
High-entropy alloys: a critical assessment of their founding principles and future prospects
2016
A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties
2018
3D printing of multiple metallic materials via modified selective laser melting
2018
Microstructure and compressive properties of AlCrFeCoNi high entropy alloy
2008
From Powders to Dense Metal Parts: Characterization of a Commercial AlSiMg Alloy Processed through Direct Metal Laser Sintering
2013
Steady state flow of the FeCoNiCrMn high entropy alloy at elevated temperatures
2014
Balling phenomena in direct laser sintering of stainless steel powder: Metallurgical mechanisms and control methods
2009
Experimental determination of latent hardening coefficients in FeMnNiCoCr
2018
The effect of location on the microstructure and mechanical properties of titanium aluminides produced by additive layer manufacturing using in-situ alloying and gas tungsten arc welding
2015
Analysis of microstructure and microtexture during grain growth in low stacking fault energy equiatomic CoCrFeMnNi high entropy and Ni–60wt.%Co alloys
2015
Aluminum Alloying Effects on Lattice Types, Microstructures, and Mechanical Behavior of High-Entropy Alloys Systems
2013
Thermal behavior of the molten pool, microstructural evolution, and tribological performance during selective laser melting of TiC/316L stainless steel nanocomposites: Experimental and simulation methods
2018
Aging behavior of a CuCr2Fe2NiMn high-entropy alloy
2011
Thermoelectric high-entropy alloys with low lattice thermal conductivity
2016
Direct additive laser manufacturing using gas- and water-atomised H13 tool steel powders
2004
Controlled Jahn-Teller distortion in (MgCoNiCuZn)O-based high entropy oxides
2017
Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy
2016
Precipitation behavior and its effects on tensile properties of FeCoNiCr high-entropy alloys
2016
A geometric model for intrinsic residual strain and phase stability in high entropy alloys
2015
Phase‐Transformation Ductilization of Brittle High‐Entropy Alloys via Metastability Engineering
2017
Preparation and Selective Laser Sintering of Nylon-12-Coated Aluminum Powders
2009
Atomic-scale characterization and modeling of 60° dislocations in a high-entropy alloy
2016
Mechanical behavior and microstructure of Ti20Hf20Zr20Ta20Nb20 high-entropy alloy loaded under quasi-static and dynamic compression conditions
2015
Carbothermal shock synthesis of high-entropy-alloy nanoparticles
2018 StandoutScience
High mixing entropy bulk metallic glasses
2011
Advanced Thermoelectric Design: From Materials and Structures to Devices
2020 Standout
Electronic and thermodynamic criteria for the occurrence of high entropy alloys in metallic systems
2014
Corrosion behavior of CuCrFeNiMn high entropy alloy system in 1 M sulfuric acid solution
2011
Microstructural investigation of plastically deformed Ti20Zr20Hf20Nb20Ta20 high entropy alloy by X-ray diffraction and transmission electron microscopy
2015
Selective laser sintering mechanism of polymer-coated molybdenum powder
2007
Effect of Ti additions on mechanical properties of NbMoTaW and VNbMoTaW refractory high entropy alloys
2017
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
2016 StandoutNature
Ultra-high strength WNbMoTaV high-entropy alloys with fine grain structure fabricated by powder metallurgical process
2017
Phase equilibria, microstructure, and high temperature oxidation resistance of novel refractory high-entropy alloys
2014
Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system
2013
Non-equiatomic high entropy alloys: Approach towards rapid alloy screening and property-oriented design
2015
Size effects on the mechanical properties of nanocrystalline NbMoTaW refractory high entropy alloy thin films
2017
Phase stability of non-equiatomic CoCrFeMnNi high entropy alloys
2015
Corrosion behavior and surface film characterization of TaNbHfZrTi high entropy alloy in aggressive nitric acid medium
2017
TCHEA1: A Thermodynamic Database Not Limited for “High Entropy” Alloys
2017
Microstructure and wear behavior of a refractory high entropy alloy
2016
Senary Refractory High-Entropy Alloy HfNbTaTiVZr
2015
MeV electron-irradiation-induced structural change in the bcc phase of Zr–Hf–Nb alloy with an approximately equiatomic ratio
2013
Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures
2014 Standout
Ab initio thermodynamics of the CoCrFeMnNi high entropy alloy: Importance of entropy contributions beyond the configurational one
2015
Mechanical alloying and milling
2001 Standout
Friction and wear behavior of a single-phase equiatomic TiZrHfNb high-entropy alloy studied using a nanoscratch technique
2018
Incipient plasticity and dislocation nucleation of FeCoCrNiMn high-entropy alloy
2013
Effects of Al and Si addition on the structure and properties of CoFeNi equal atomic ratio alloy
2014
Precipitation in the equiatomic high-entropy alloy CrMnFeCoNi
2015
Magnetic and mechanical properties of an additively manufactured equiatomic CoFeNi complex concentrated alloy
2020
Mechanisms of Nanoparticle-Induced Oxidative Stress and Toxicity
2013
Oxidation Behavior between 700 and 1300 °C of Refractory TiZrNbHfTa High‐Entropy Alloys Containing Aluminum
2018
Balling behavior of stainless steel and nickel powder during selective laser melting process
2011
Densification mechanism and microstructural evolution in selective laser sintering of Al–12Si powders
2010
Selective laser melting of Inconel 625 using pulse shaping
2010
Study of a bcc multi-principal element alloy: Tensile and simple shear properties and underlying deformation mechanisms
2017
Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution
2018 Standout
Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation
2015
Combinatorial metallurgical synthesis and processing of high-entropy alloys
2018
The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy
2013 Standout
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
Effect of Co addition on crystal structure and mechanical properties of Ti0.5CrFeNiAlCo high entropy alloy
2008
Progress in High-Entropy Alloys
2014
Microstructures and mechanical properties of Ti NbMoTaW refractory high-entropy alloys
2017
Effects of processing parameters on properties of selective laser melting Mg–9%Al powder mixture
2011
Temperature dependencies of the elastic moduli and thermal expansion coefficient of an equiatomic, single-phase CoCrFeMnNi high-entropy alloy
2014
Microstructure characterizations and strengthening mechanism of multi-principal component AlCoCrFeNiTi0.5 solid solution alloy with excellent mechanical properties
2008
A precipitation-hardened high-entropy alloy with outstanding tensile properties
2015 Standout
Microstructural and mechanical characterization of an equiatomic YGdTbDyHo high entropy alloy with hexagonal close-packed structure
2018
316L Stainless Steel with Gradient Porosity Fabricated by Selective Laser Melting
2009
Temperature Profile and Imaging Analysis of Laser Additive Manufacturing of Stainless Steel
2013
Microstructure and mechanical properties of refractory MoNbHfZrTi high-entropy alloy
2015
Microstructure and the properties of FeCoCuNiSnx high entropy alloys
2012
Comparative study of the microstructures and mechanical properties of direct laser fabricated and arc-melted Al x CoCrFeNi high entropy alloys
2015
Prediction and validation of quaternary high entropy alloys using statistical approaches
2015
In-situ neutron diffraction study of deformation behavior of a multi-component high-entropy alloy
2014
Combinatorial exploration of the High Entropy Alloy System Co-Cr-Fe-Mn-Ni
2017
Mechanical Properties and Stacking Fault Energies of NiFeCrCoMn High-Entropy Alloy
2013
Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases
2016
Effect of Nb addition on the microstructure and properties of AlCoCrFeNi high-entropy alloy
2011
Accelerated exploration of multi-principal element alloys for structural applications
2015
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
2018 StandoutScience
Insights into the phase diagram of the CrMnFeCoNi high entropy alloy
2015
Solid Solution Formation Criteria for High Entropy Alloys
2007
Microstructures and mechanical properties of compositionally complex Co-free FeNiMnCr18 FCC solid solution alloy
2015
NbTaV-(Ti,W) refractory high-entropy alloys: Experiments and modeling
2016
The fcc solid solution stability in the Co-Cr-Fe-Mn-Ni multi-component system
2017
High-entropy functional materials
2018
Investigation of phases in Al23Co15Cr23Cu8Fe15Ni16 and Al8Co17Cr17Cu8Fe17Ni33 high entropy alloys and comparison with equilibrium phases predicted by Thermo-Calc
2012
Effect of elemental interaction on microstructure of CuCrFeNiMn high entropy alloy system
2010
Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al 0.3 CoCrFeNi high entropy alloy
2017
Tunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys
2018
Effect of alloying elements on microstructure and properties of multiprincipal elements high-entropy alloys
2008
A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties
2015 Standout
Atomic displacement in the CrMnFeCoNi high-entropy alloy – A scaling factor to predict solid solution strengthening
2016
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
2016 Standout
Development and exploration of refractory high entropy alloys—A review
2018 Standout
Database development and Calphad calculations for high entropy alloys: Challenges, strategies, and tips
2017
Phase Selection in High-Entropy Alloys: From Nonequilibrium to Equilibrium
2014
Effect of cryo-deformation on structure and properties of CoCrFeNiMn high-entropy alloy
2014
Steels in additive manufacturing: A review of their microstructure and properties
2019
Physical Properties of High Entropy Alloys
2013
Effect of overlap rate on recrystallization behaviors of Laser Solid Formed Inconel 718 superalloy
2012
A new thermodynamic parameter to predict formation of solid solution or intermetallic phases in high entropy alloys
2015
Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures
2016
Progress in High Entropy Alloys
2015
Selective laser sintering: A qualitative and objective approach
2003
High-entropy alloy: challenges and prospects
2015 Standout
Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys
2013
Phase composition and solid solution strengthening effect in TiZrNbMoV high-entropy alloys
2015
Effects of annealing treatment on properties of CoCrFeNiTiAlx multi-component alloys
2012
Tensile properties of low-stacking fault energy high-entropy alloys
2015
Laser sintering of polyamides and other polymers
2011 Standout
Explore the possibility of forming fcc high entropy alloys in equal-atomic systems CoFeMnNiM and CoFeMnNiSmM
2011
Microstructural Characteristics and Mechanical Behaviors of AlCoCrFeNi High-Entropy Alloys at Ambient and Cryogenic Temperatures
2011
Thermodynamic design of high-entropy refractory alloys
2016
A novel, single phase, non-equiatomic FeMnNiCoCr high-entropy alloy with exceptional phase stability and tensile ductility
2013
Atomic-scale investigation of fast oxidation kinetics of nanocrystalline CrMnFeCoNi thin films
2018
In-situ reactive processing of nickel aluminides by laser-engineered net shaping
2003
Mechanisms of plastic deformation in [1¯11]-oriented single crystals of FeNiMnCrCo high entropy alloy
2016
Alloy design for intrinsically ductile refractory high-entropy alloys
2016
On single-phase status and segregation of an as-solidified septenary refractory high entropy alloy
2017
Current and emerging practices of CALPHAD toward the development of high entropy alloys and complex concentrated alloys
2018
The generalized thermodynamic rule for phase selection in multicomponent alloys
2015
Polycrystalline elastic moduli of a high-entropy alloy at cryogenic temperatures
2014
Computational Thermodynamics Aided High-Entropy Alloy Design
2012
Hexagonal High-entropy Alloys
2014
Additive Manufacturing of Al-12Si Alloy Via Pulsed Selective Laser Melting
2015
Accelerated atomic-scale exploration of phase evolution in compositionally complex materials
2017
Characterization of titanium aluminide alloy components fabricated by additive manufacturing using electron beam melting
2009
Structure and properties of (AlCrMnMoNiZrB0.1)Nx coatings prepared by reactive DC sputtering
2011
Microstructural evolution of a CoCrFeMnNi high-entropy alloy after swaging and annealing
2015
Atomic packing efficiency and phase transition in a high entropy alloy
2008
Superconductivity in thermally annealed Ta-Nb-Hf-Zr-Ti high-entropy alloys
2016
Superior high tensile elongation of a single-crystal CoCrFeNiAl0.3 high-entropy alloy by Bridgman solidification
2014
Embedding anti-counterfeiting features in metallic components via multiple material additive manufacturing
2018
An overview of Direct Laser Deposition for additive manufacturing; Part I: Transport phenomena, modeling and diagnostics
2015
A hexagonal close-packed high-entropy alloy: The effect of entropy
2016
Composition Dependence of Phase Stability, Deformation Mechanisms, and Mechanical Properties of the CoCrFeMnNi High-Entropy Alloy System
2014
Temperature Effects on Deformation and Serration Behavior of High-Entropy Alloys (HEAs)
2014
Local lattice distortion in high-entropy alloys
2017
Effect of aging treatment on microstructure and properties of high-entropy Cu0.5CoCrFeNi alloy
2010
Top surface and side roughness of Inconel 625 parts processed using selective laser melting
2009
An understanding of high entropy alloys from phase diagram calculations
2013
Microstructural characterization and mechanical properties of an Al0.5CoCrFeCuNi high-entropy alloy in as-cast and heat-treated/quenched conditions
2013
Novel TiB2-reinforced 316L stainless steel nanocomposites with excellent room- and high-temperature yield strength developed by additive manufacturing
2018
Elucidating the microstructure and wear behavior for multicomponent alloy clad layers by in situ synthesis
2008
High density selective laser melting of Waspaloy®
2007
Evolution of microstructure, hardness, and corrosion properties of high-entropy Al0.5CoCrFeNi alloy
2010
Improvement of the glass-forming ability of Zr55Cu30Al10Ni5 and Cu47Ti34Zr11Ni8 alloys by electro-deoxidation of the melts
2006
Microstructure and tensile properties of Al0.5CoCrCuFeNi alloys produced by simple rolling and annealing
2015
Microstructures and properties of high-entropy alloys
2013 Standout
Selective laser melting of TiN nanoparticle-reinforced AlSi10Mg composite: Microstructural, interfacial, and mechanical properties
2020
Phase stability and distortion in high-entropy oxides
2017
Beyond Atomic Sizes and Hume-Rothery Rules: Understanding and Predicting High-Entropy Alloys
2015
Tensile properties of high- and medium-entropy alloys
2013
Data-Driven Design of Ecofriendly Thermoelectric High-Entropy Sulfides
2018
Rapid Manufacturing of Aluminum Components
2003 Science
Entropy Determination of Single-Phase High Entropy Alloys with Different Crystal Structures over a Wide Temperature Range
2018
Microstructure and mechanical properties of refractory high entropy (Mo 0.5 NbHf 0.5 ZrTi) BCC /M 5 Si 3 in-situ compound
2015
Effects of scanning parameters on material deposition during Electron Beam Selective Melting of Ti-6Al-4V powder
2014
Weldability of a high entropy CrMnFeCoNi alloy
2016
Microstructure characterisation and process optimization of laser assisted rapid fabrication of 316L stainless steel
2005
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
Size dependence of nanostructures: Impact of bond order deficiency
2006
Thermal stability and oxidation resistance of laser clad TiVCrAlSi high entropy alloy coatings on Ti–6Al–4V alloy
2011
High-entropy carbide: A novel class of multicomponent ceramics
2018
Fabrication and properties of nanocrystalline Co0.5FeNiCrTi0.5 high entropy alloy by MA–SPS technique
2012
Ab initio assisted design of quinary dual-phase high-entropy alloys with transformation-induced plasticity
2017
The use of diffusion multiples to examine the compositional dependence of phase stability and hardness of the Co-Cr-Fe-Mn-Ni high entropy alloy system
2016
High entropy alloys
2015
New structure in refractory high-entropy alloys
2014
Hierarchical microstructure design to tune the mechanical behavior of an interstitial TRIP-TWIP high-entropy alloy
2018
Rare-earth high entropy alloys with hexagonal close-packed structure
2018
Precipitation hardening in CoCrFeNi-based high entropy alloys
2017
Short-Range Order in High Entropy Alloys: Theoretical Formulation and Application to Mo-Nb-Ta-V-W System
2017
Reactive oxygen species generating systems meeting challenges of photodynamic cancer therapy
2016 Standout
Microstructure and Mechanical Properties of VTaTiMoAl<sub>x</sub> Refractory High Entropy Alloys
2017
Consolidation phenomena in laser and powder-bed based layered manufacturing
2007
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
2018 Standout
Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys
2011 Standout
Phase transformation induced by lattice distortion in multiprincipal component CoCrFeNiCuxAl1−x solid-solution alloys
2008
Effect of annealing treatment on microstructures and mechanical properties of FeCoNiCuAl high entropy alloys
2013
A TRIP-assisted dual-phase high-entropy alloy: Grain size and phase fraction effects on deformation behavior
2017
High dislocation density–induced large ductility in deformed and partitioned steels
2017 StandoutScience
Exploration and Development of High Entropy Alloys for Structural Applications
2014
High temperature deformation behavior and dynamic recrystallization in CoCrFeNiMn high entropy alloy
2015
Processing of a Polyamide-12/carbon nanofibre composite by laser sintering
2010
More than entropy in high-entropy alloys: Forming solid solutions or amorphous phase
2013
Tin-Iron Based Nano-Materials as Anodes for Li-Ion Batteries
2011 StandoutNobel
Microstructure and compressive properties of multicomponent Alx(TiVCrMnFeCoNiCu)100−x high-entropy alloys
2006
Guidelines in predicting phase formation of high-entropy alloys
2014
High-entropy alloys
2019 Standout
An ab initio and experimental studies of the structure, mechanical parameters and state density on the refractory high-entropy alloy systems
2017
A fracture-resistant high-entropy alloy for cryogenic applications
2014 StandoutScience
Design of Refractory High-Entropy Alloys
2015
Effect of V content on microstructure and mechanical properties of the CoCrFeMnNiVx high entropy alloys
2015
Mechanical Alloying of Metal–Organic Frameworks
2017 StandoutNobel
Phase Change and Mechanical Behaviors of TixCoCrFeNiCu1−yAly High Entropy Alloys
2010
Morphology Transition from Dendrites to Equiaxed Grains for AlCoCrFeNi High-Entropy Alloys by Copper Mold Casting and Bridgman Solidification
2011
Colossal dielectric constant in high entropy oxides
2016
Formation and Stability of Equiatomic and Nonequiatomic Nanocrystalline CuNiCoZnAlTi High-Entropy Alloys by Mechanical Alloying
2010
Critical Assessment 14: High entropy alloys and their development as structural materials
2015
Fundamentals of Selective Laser Melting of alloyed steel powders
2006 Standout
Multicomponent and High Entropy Alloys
2014
Solid‐Solution Phase Formation Rules for Multi‐component Alloys
2008 Standout
Mapping the world of complex concentrated alloys
2017
Novel TiNbTaZrMo high-entropy alloys for metallic biomaterials
2016
Effect of aluminum contents on microstructure and properties of AlxCoCrFeNi alloys
2010
MoNbTaV Medium-Entropy Alloy
2016
Selective laser melting of iron-based powder
2004
Aging behavior of the HfNbTaTiZr high entropy alloy
2017
Microstructure and properties of AlCrFeNiCoCu high entropy alloy prepared by powder metallurgy
2012
Cyclic plasticity and fatigue damage of CrMnFeCoNi high entropy alloy fabricated by laser powder-bed fusion
2020
Achieving ultra-high strength and ductility in equiatomic CrCoNi with partially recrystallized microstructures
2018
In-situ SEM observation of phase transformation and twinning mechanisms in an interstitial high-entropy alloy
2018
A refractory Hf25Nb25Ti25Zr25 high-entropy alloy with excellent structural stability and tensile properties
2014
Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties
2007
Additive manufacturing of metals
2016 Standout
Structural stability of NiCoFeCrAlx
2013
High temperature oxidation study of direct laser deposited AlXCoCrFeNi (X=0.3,0.7) high entropy alloys
2019
TENSILE AND COMPRESSIVE MECHANICAL BEHAVIOR OF A CoCrCuFeNiAl0.5 HIGH ENTROPY ALLOY
2009
Microstructure and Corrosion Properties of AlCoCrFeNi High Entropy Alloy Coatings Deposited on AISI 1045 Steel by the Electrospark Process
2012
Fatigue performance of additive manufactured metallic parts
2013
Mechanical Properties and Structures of High Entropy Alloys and Bulk Metallic Glasses Composites
2010
Elastic and plastic properties of as-cast equimolar TiHfZrTaNb high-entropy alloy
2015
High entropy brasses and bronzes – Microstructure, phase evolution and properties
2015
Works of I.T.H. Chang being referenced
Influence of particle size and reactive oxygen species on cobalt chrome nanoparticle-mediated genotoxicity
2013
Advances in powder metallurgy
2013
Microstructural evolution an dmechanical properties of Rapidsteel 2.0
2002
Liquid phase sintering of M3/2 high speed steel by selective laser sintering
1998
Selective laser sintering of gas atomized M2 high speed steel powder
2000
Net shape fabrication of stainless-steel micro machine components from metallic powder
2008
The influence of thermal processing route on the microstructure of some TiAl-based alloys
1999
“Big cube” phase formation in Zr-based metallic glasses
2001
Mechanical Alloying of Ni-Nb Alloys
1996
Selective laser sintering of gas and water atomized high speed steel powders
1999
Microstructural evolution during laser cladding of M2 high-speed steel
2000
Instability of scan tracks of selective laser sintering of high speed steel powder
1999
The effect of infiltrant choice on the microstructure and mechanical properties of Rapidsteel2.0
2005
Microstructural development in equiatomic multicomponent alloys
2004 Standout
Fracture behaviour of selective laser sintered Rapidsteel 2.0 under static and dynamic loading
2003
The effect of process parameters and heat treatment on the microstructure of direct laser fabricated TiAl alloy samples
2001
The optimisation of processing parameters and characterisation of microstructure of direct laser fabricated TiAl alloy components
2000