Standout Papers
Citation Impact
Citing Papers
Reassessment of the Al–Mn system and a thermodynamic description of the Al–Mg–Mn system
2007
Role of welding parameters on interfacial bonding in dissimilar steel/aluminum friction stir welds
2015
Fundamentals and advances in magnesium alloy corrosion
2017 Standout
Metal additive manufacturing in aerospace: A review
2021 Standout
Influence of Cutting Parameters and Tool Wear on the Surface Integrity of Cobalt-Based Stellite 6 Alloy When Machined Under a Dry Cutting Environment
2016
Metal–organic framework-based materials: superior adsorbents for the capture of toxic and radioactive metal ions
2018 Standout
Brittle intermetallic compound makes ultrastrong low-density steel with large ductility
2015 Nature
Strategies for improving the sustainability of structural metals
2019 StandoutNature
Ab‐initiosimulations of materials using VASP: Density‐functional theory and beyond
2008 Standout
EBSD: a powerful microstructure analysis technique in the field of solidification
2009
Spintronics: A Challenge for Materials Science and Solid‐State Chemistry
2007 Standout
Additively manufactured hierarchical stainless steels with high strength and ductility
2017 Standout
Temperature Dependent Magnon-Phonon Coupling in bcc Fe from Theory and Experiment
2014
Magnetic-field-induced shape recovery by reverse phase transformation
2006 StandoutNature
Magnetocaloric effect and its relation to shape-memory properties in ferromagnetic Heusler alloys
2009 Standout
Giant magnetocaloric effect driven by structural transitions
2012 Standout
High figure of merit in (Ti,Zr,Hf)NiSn half-Heusler alloys
2012
Static recrystallization of SiO2-particle containing {011}<100> copper single crystals
2003
Microstructural evolution and strain hardening behavior during plastic deformation of Fe–12Mn–8Al–0.8C steel
2013
Advances in lead-free electronics soldering
2001 Standout
A critical review of high entropy alloys and related concepts
2016 Standout
Effects of aluminum content on cracking phenomenon occurring during cold rolling of three ferrite-based lightweight steel
2013
High temperature shape memory alloys
2010
Microstructure and mechanical properties of dissimilar friction stir welds in austenitic-duplex stainless steels
2020
Thermodynamic stability of Co–Al–W L12 γ′
2013
Design and Tailoring of Alloys for Additive Manufacturing
2020
Effects of Al addition on high strain rate deformation of fully austenitic high Mn steels
2011
Stacking fault energies of face-centered cubic concentrated solid solution alloys
2017
Six cases of reliability study of Pb-free solder joints in electronic packaging technology
2002 Standout
A review of shape memory alloy research, applications and opportunities
2013 Standout
Review: liquid phase sintering
2008 Standout
A review of Ga2O3 materials, processing, and devices
2018 Standout
Research of phase transformation on Fe–8.7Al–28.3Mn–1C–5.5Cr alloy
2009
Use of shape-memory alloys in construction: a critical review
2016
Liquid phase sintered Cu–In composite solders for thermal interface material and interconnect applications
2011
Properties of lead-free solder alloys with rare earth element additions
2004
Effects of Mn and Al contents on cryogenic-temperature tensile and Charpy impact properties in four austenitic high-Mn steels
2015 Standout
Additive manufacturing of metallic components – Process, structure and properties
2017 Standout
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
2009 Standout
Tensile deformation of a duplex Fe–20Mn–9Al–0.6C steel having the reduced specific weight
2011
Shape memory alloys as an effective tool to damp oscillations
2015
Tensile deformation of a low density Fe–27Mn–12Al–0.8C duplex steel in association with ordered phases at ambient temperature
2013
Multi-Layered Potts Model Simulation of the Formation of Graded Structure in Iron-Copper Liquid-Phase-Sintered Alloy
2003
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
2013 Standout
Prediction of high-entropy stabilized solid-solution in multi-component alloys
2012 Standout
Recent advances of conductive adhesives as a lead-free alternative in electronic packaging: Materials, processing, reliability and applications
2006 Standout
Novel ferrite–austenite duplex lightweight steel with 77% ductility by transformation induced plasticity and twinning induced plasticity mechanisms
2014
Precipitation and dissolution behavior of κ-carbide during continuous heating in Fe-9.3Mn-5.6Al-0.16C lightweight steel
2015
Magnetic and martensitic transformations of NiMnX(X=In,Sn,Sb) ferromagnetic shape memory alloys
2004 Standout
Atom order and thermodynamic properties of the ternary Laves phase Ti(TiyNixAl1–x–y)2
2006
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
Advanced Thermoelectric Design: From Materials and Structures to Devices
2020 Standout
Simple rules for the understanding of Heusler compounds
2011 Standout
Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys
2013 Standout
Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off
2016 StandoutNature
Structure and mechanical properties of B2 ordered refractory AlNbTiVZrx (x = 0–1.5) high-entropy alloys
2017
Phase separation and magnetic properties of half-metal-type Co2Cr1−xFexAl alloys
2004
Thermodynamic properties of the Al–Fe–Ni system acquired via a hybrid approach combining calorimetry, first-principles and CALPHAD
2009
Laser welded superelastic Cu–Al–Mn shape memory alloy wires
2015
Iron-based shape memory alloys for civil engineering structures: An overview
2014
Multicomponent multisublattice alloys, nonconfigurational entropy and other additions to the Alloy Theoretic Automated Toolkit
2009 Standout
Ab initio thermodynamics of the CoCrFeMnNi high entropy alloy: Importance of entropy contributions beyond the configurational one
2015
Influence of welding parameters on intermetallic compounds formation in dissimilar steel/aluminum friction stir welds
2017
Current state of Fe-Mn-Al-C low density steels
2017 Standout
Low-Density Steels
2014
Microstructure and Mechanical Properties of New AlCoxCrFeMo0.5Ni High‐Entropy Alloys
2009
Evaluation of corrosion resistance of aluminium coating with and without annealing against molten carbonate using electrochemical impedance spectroscopy
2014
On microstructure and mechanical performance of AlCoCrFeMo0.5Nix high-entropy alloys
2012
First-principles calculations of the structural and thermodynamic properties of bcc, fcc and hcp solid solutions in the Al–TM (TM=Ti, Zr and Hf) systems: A comparison of cluster expansion and supercell methods
2008
Structure–property–function relationships of natural and engineered wood
2020 Standout
Isothermal precipitation behavior of κ-carbide in the Fe–9Mn–6Al–0.15C lightweight steel with a multiphase microstructure
2013
Tensile deformation of low-density Fe–Mn–Al–C austenitic steels at ambient temperature
2012
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
2018 StandoutScience
Atom probe tomography investigation of heterogeneous short-range ordering in the ‘komplex’ phase state (K-state) of Fe–18Al (at.%)
2015
Study of iron-catalysed growth ofβ-Ga2O3nanowires and their detailed characterization using TEM, Raman and cathodoluminescence techniques
2014
Development and exploration of refractory high entropy alloys—A review
2018 Standout
The roles of grain orientation and grain boundary characteristics in the enhanced superelasticity of Cu71.8Al17.8Mn10.4 shape memory alloys
2014
Database development and Calphad calculations for high entropy alloys: Challenges, strategies, and tips
2017
Materials Design and Discovery with High-Throughput Density Functional Theory: The Open Quantum Materials Database (OQMD)
2013 Standout
Improvement of damping properties in laser processed superelastic Cu-Al-Mn shape memory alloys
2016 Standout
Novel Metal–Organic Framework (MOF) Based Composite Material for the Sequestration of U(VI) and Th(IV) Metal Ions from Aqueous Environment
2017
Thermodynamic calculation on the stability of (Fe,Mn)3AlC carbide in high aluminum steels
2010
Shape-Memory Nanopores Induced in Coordination Frameworks by Crystal Downsizing
2013 StandoutScienceNobel
Infrared detectors: status and trends
2003 Standout
Graphitic Carbon Nitride (g-C3N4)-Based Photocatalysts for Artificial Photosynthesis and Environmental Remediation: Are We a Step Closer To Achieving Sustainability?
2016 Standout
FIB/TEM Characterization of the Composition and Structure of Core/Shell Cu−Ni Nanowires
2008
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Effect of grain size and texture on pseudoelasticity in Cu–Al–Mn-based shape memory wire
2005
First principles phonon calculations in materials science
2015 Standout
Effect of reactive alloy elements on friction stir welded butt joints of metallurgically immiscible magnesium alloys and steel
2019
Core/Shell Nanoparticles: Classes, Properties, Synthesis Mechanisms, Characterization, and Applications
2011 Standout
Computational Thermodynamics of Materials
2016
Novel ultra-high-strength (ferrite + austenite) duplex lightweight steels achieved by fine dislocation substructures (Taylor lattices), grain refinement, and partial recrystallization
2015
Interfacial reactions between lead-free solders and common base materials
2005 Standout
Microstructures and properties of high-entropy alloys
2013 Standout
Absence of long-range chemical ordering in equimolar FeCoCrNi
2012
Carbon materials for structural self-sensing, electromagnetic shielding and thermal interfacing
2012 Standout
Analysis of process parameters effects on friction stir welding of dissimilar aluminum alloy to advanced high strength steel
2014
Prediction of primary intermetallic compound formation during interfacial reaction between Sn-based solder and Ni substrate
2002
Review on concentrating solar power plants and new developments in high temperature thermal energy storage technologies
2015 Standout
High dislocation density–induced large ductility in deformed and partitioned steels
2017 StandoutScience
The role of aluminum distribution on the local corrosion resistance of the microstructure in a sand-cast AM50 alloy
2013
Anisotropic Crystal Plasticity Finite Element Modeling of the Effect of Crystal Orientation and Solder Joint Geometry on Deformation after Temperature Change
2008
First-principles study of Co3(Al,W) alloys using special quasi-random structures
2008
Development of thermodynamic database for high Mn–high Al steels: Phase equilibria in the Fe–Mn–Al–C system by experiment and thermodynamic modeling
2015
High-entropy alloys
2019 Standout
Iron-based shape memory alloy strips for strengthening RC members: Material behavior and characterization
2018 Standout
An Energy‐Efficient, Wood‐Derived Structural Material Enabled by Pore Structure Engineering towards Building Efficiency
2019
Metamagnetic shape memory effect in a Heusler-type Ni43Co7Mn39Sn11 polycrystalline alloy
2006
Fe–Al–Mn–C lightweight structural alloys: a review on the microstructures and mechanical properties
2013
Low-Density Steels: Complex Metallurgy for Automotive Applications
2014
High Manganese and Aluminum Steels for the Military and Transportation Industry
2014
On the superior hot hardness and softening resistance of AlCoCrxFeMo0.5Ni high-entropy alloys
2011
Enhanced thermoelectric properties of p-type Bi 0.5 Sb 1.5 Te 3 bulk alloys by electroless plating with Cu and annealing
2016
Synthesis and catalytic properties of bimetallic nanomaterials with various architectures
2012
High-Entropy Alloys: A Critical Review
2014 Standout
Works of Ikuo Ohnuma being referenced
Lambda transitions in materials science: Recent advances in CALPHAD and first‐principles modelling
2013
Interfacial Reaction and Morphology Between Molten Sn Base Solders and Cu Substrate
2004
Phase equilibria in the Fe–Co binary system
2002
Phase equilibria and Heusler phase stability in the Cu-rich portion of the Cu–Al–Mn system
1998
Phase equilibria and stability of ordered b.c.c. phases in the Fe-rich portion of the Fe–Ga system
2002
Abnormal Grain Growth Induced by Cyclic Heat Treatment
2013 Science
Ordering, Martensitic and Ferromagnetic Transformations in Ni–Al–Mn Heusler Shape Memory Alloys
2000
Ordering and martensitic transformations of Ni2AlMn heusler alloys
1998
High-strength Fe–20Mn–Al–C-based Alloys with Low Density
2010
Thermodynamic assessment of the Aluminum-Manganese (Al-Mn) binary phase diagram
1999
Thermodynamic assessment of the phase diagrams of the Cu-Sb and Sb-Zn systems
2000
Thermodynamic assessment of the Cu-In binary system
2002
Experimental investigation and thermodynamic calculation of the phase equilibria in the Cu-Sn and Cu-Sn-Mn systems
2004
Phase equilibria and γ′-L12 phase stability in the Ni-rich portion of Ni–Fe–Si and Ni–Fe–Al systems
2004
Stability of B2 ordered phase in the Ti-rich portion of Ti–Al–Cr and Ti–Al–Fe ternary systems
2000
Experimental determination and thermodynamic calculation of phase equilibria in the Fe−Mn−Al system
2006
New ternary compound Co3(Ge,W) with L12 structure
2006
Thermodynamic database for phase diagrams in micro-soldering alloys
1999
Stability of ordered L12 phase in Ni3Fe–Ni3X (X:Si and Al) pseudobinary alloys
2004
Superelastic Effect in Polycrystalline Ferrous Alloys
2011 Science
Correlation between interfacial energy and phase diagram in ceramic-metal systems
2001
Revisiting diffusion in Fe–Al intermetallics: Experimental determination and phenomenological treatment
2009
An assessment of the entire Al–Fe system including D03 ordering
2009
Examination of the Zener Relationship between Grain Size and Particle Dispersion
1997
Thermodynamic calculation of the In–Sn–Zn ternary system
2001
Phase equilibria and stability of the bcc aluminide in the Co‐Cr‐Al system
1998
Experimental determination and thermodynamic calculation of the phase equilibria and surface tension in the Sn-Ag-In system
2002
Phase equilibria and stability of ordered BCC phases in the Fe-rich portion of the Fe–Al system
2001
Thermodynamic database of the phase diagrams in copper base alloy systems
2004
Phase equilibria and the related properties of Sn-Ag-Cu based Pb-free solder alloys
2000
Phase equilibria and stability of the B2 phase in the Ni–Mn–Al and Co–Mn–Al systems
1998
Phase equilibria in the Ti–Al binary system
2000
Cobalt-Base High-Temperature Alloys
2006 StandoutScience
Computer simulation of grain growth in dual-phase structures
1999