Citation Impact
Citing Papers
Fundamentals and advances in magnesium alloy corrosion
2017 Standout
Potential yields and properties of oil from the hydrothermal liquefaction of microalgae with different biochemical content
2010 Standout
Hydroxide oxidation and peroxide formation at embedded binuclear transition metal sites; TM = Cr, Mn, Fe, Co
2011
Release of K, Cl, and S during Pyrolysis and Combustion of High-Chlorine Biomass
2011 Standout
Recent developments in stainless steels
2009 Standout
A thermodynamic study of the gaseous potassium chemistry in the convection sections of biomass fired boilers
2010
A robust bi-layer separator with Lewis acid-base interaction for high-rate capacity lithium-ion batteries
2019 StandoutNobel
Volatility of Common Protective Oxides in High-Temperature Water Vapor: Current Understanding and Unanswered Questions
2004
Fireside Corrosion during Oxyfuel Combustion Considering Various SO2 Contents
2014
An overview of the composition and application of biomass ash.
2012
Corrosion Mechanism of Alloy 310 Austenitic Steel beneath NaCl Deposit under Varying SO2 Concentrations in an Oxy-fuel Combustion Atmosphere
2013
Chemical Characteristics of Biomass Ashes
2018 Standout
Origination and formation of NH4Cl in biomass-fired furnace
2012
Two strategies to reduce gaseous KCl and chlorine in deposits during biomass combustion — injection of ammonium sulphate and co-combustion with peat
2011
Techno-economic analysis of municipal solid waste gasification for electricity generation in Brazil
2015 Standout
The oxidation behaviour of the 9 % Cr steel P92in CO2- and H2O-rich gases relevant to oxyfuel environments
2010
Properties of biochar
2018 Standout
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
Scale formation mechanisms of martensitic steels in high CO2/H2O-containing gases simulating oxyfuel environments
2009
Electrical Conductivity and Thermal Expansion of Spinels at Elevated Temperatures
2007 Standout
Research on using EGR and ignition timing to control load of a spark-ignition engine fueled with methanol
2012
KCl-induced high temperature corrosion of the austenitic Fe–Cr–Ni alloys 304L and Sanicro 28 at 600°C
2005
Release and Transformation Characteristics of Modes of Occurrence of Chlorine in Coal Gangue during Combustion
2018
Homogeneous charge compression ignition (HCCI) combustion: Mixture preparation and control strategies in diesel engines
2014 Standout
Biomass-based chemical looping technologies: the good, the bad and the future
2017 Standout
Biochar physicochemical properties: pyrolysis temperature and feedstock kind effects
2020 Standout
Comparison of potassium chloride and potassium carbonate with respect to their tendency to cause high temperature corrosion of stainless 304L steel
2012
Dislocation and twin substructure evolution during strain hardening of an Fe–22wt.% Mn–0.6wt.% C TWIP steel observed by electron channeling contrast imaging
2011 Standout
Nickel–Iron Oxyhydroxide Oxygen-Evolution Electrocatalysts: The Role of Intentional and Incidental Iron Incorporation
2014 Standout
Study on the Deposits Derived from a Biomass Circulating Fluidized-Bed Boiler
2012
An overview of advances in biomass gasification
2016 Standout
Fate of Alkali Metals and Phosphorus of Rapeseed Cake in Circulating Fluidized Bed Boiler Part 2: Cocombustion with Coal
2010
A comparative study of oxide scales grown on stainless steel and nickel-based superalloys in ultra-high temperature supercritical water at 800 °C
2016
Measures to reduce chlorine in deposits: Application in a large-scale circulating fluidised bed boiler firing biomass
2010
Influence of novel cycle concepts on the high‐temperature corrosion of power plants
2008
Ash-related issues during biomass combustion: Alkali-induced slagging, silicate melt-induced slagging (ash fusion), agglomeration, corrosion, ash utilization, and related countermeasures
2015 Standout
The oxidation resistance and ignition temperature of AZ31 magnesium alloy with additions of La2O3 and La
2012
A comparative review of biochar and hydrochar in terms of production, physico-chemical properties and applications
2015 Standout
The importance of SO2 and SO3 for sulphation of gaseous KCl – An experimental investigation in a biomass fired CFB boiler
2010
Effect of hydrogen and carbon dioxide on the performance of methane fueled solid oxide fuel cell
2016
Lignocellulosic biomass pyrolysis mechanism: A state-of-the-art review
2017 Standout
In Situ Investigation of the Initial Stages of KCl-Induced Corrosion of a Chromia-Forming Steel at 450°C Using an Environmental Scanning Electron Microscope
2015
Fireside Corrosion during Oxyfuel Combustion Considering Various SO2 Contents
2014
Overview of recent advances in thermo-chemical conversion of biomass
2010 Standout
An overview of the composition and application of biomass ash. Part 1. Phase–mineral and chemical composition and classification
2012 Standout
In Situ ESEM Investigation of KCl-Induced Corrosion of a FeCrAl and a Model FeNiCrAl Alloy in Lab Air at 450°C
2015
Hydrogen production for energy: An overview
2020 Standout
Ash Characterization and Transformation Behavior of the Fixed-Bed Combustion of Novel Crops: Poplar, Brassica, and Cassava Fuels
2012
High temperature corrosion of superheater steels by KCl and K2CO3 under dry and wet conditions
2012
Oxy-fuel combustion of solid fuels
2010 Standout
Oxyfuel combustion for CO2 capture in power plants
2015 Standout
Comprehensive utilization and environmental risks of coal gangue: A review
2019 Standout
Protective coating on stainless steel interconnect for SOFCs: oxidation kinetics and electrical properties
2004
Study on Deposits on the Surface, Upstream, and Downstream of Bag Filters in a 12 MW Biomass-Fired Boiler
2010
Works of H. Asteman being referenced
Quantitative AES depth profiling of iron and chromium oxides in solid solution, (Cr 1− x Fe x ) 2 O 3
2002
A Pilot Plant Study of the Effect of Alkali Salts on Initial Stages of the High Temperature Corrosion of Alloy 304L
2004
Oxidation of Stainless Steel in H<sub>2</sub>O/O<sub>2</sub> Environments – Role of Chromium Evaporation
2004
Effect of Water-Vapor-Induced Cr Vaporization on the Oxidation of Austenitic Stainless Steels at 700 and 900°C
2004
Indication of Chromium Oxide Hydroxide Evaporation During Oxidation of 304L at 873 K in the Presence of 10% Water Vapor
1999
Evidence for Chromium Evaporation Influencing the Oxidation of 304L: The Effect of Temperature and Flow Rate
2002
Potassium, Chlorine, and Sulfur in Ash, Particles, Deposits, and Corrosion during Wood Combustion in a Circulating Fluidized-Bed Boiler
2006
Oxidation of 310 steel in H2O/O2 mixtures at 600 °C: the effect of water-vapour-enhanced chromium evaporation
2002
Chromic acid evaporation upon exposure of Cr2O3(s) to H2O(g) and O2(g) – mechanism from first principles
2003
A comparison of the oxidation behaviours of Al2O3 formers and Cr2O3 formers at 700°C – Oxide solid solutions acting as a template for nucleation
2008
The Influence of Water Vapor on the Corrosion of Chromia-Forming Steels
2001
Influence of Water Vapor and Flow Rate on the High-Temperature Oxidation of 304L; Effect of Chromium Oxide Hydroxide Evaporation
2000