Citation Impact
Citing Papers
The enhanced anticoagulation for graphene induced by COOH+ ion implantation
2015
Fundamentals and advances in magnesium alloy corrosion
2017 Standout
High-strength Damascus steel by additive manufacturing
2020 StandoutNature
‘Green’ synthesis of metals and their oxide nanoparticles: applications for environmental remediation
2018 Standout
Strategies for improving the sustainability of structural metals
2019 StandoutNature
Neutralization of red mud using CO2 sequestration cycle
2010
Electrografting: a powerful method for surface modification
2011 Standout
Laser additive manufacturing of metallic components: materials, processes and mechanisms
2012 Standout
Recent developments in stainless steels
2009 Standout
Electrochemical modification of chromium surfaces using 4-nitro- and 4-fluorobenzenediazonium salts
2009
Electrochemical characterisation of a martensitic stainless steel in a neutral chloride solution
2012
Polyethyleneimine as a corrosion inhibitor for ASTM 420 stainless steel in near-neutral saline media
2008
Electrochemical and XPS studies of the passive film formed on stainless steels in borate buffer and chloride solutions
2006
Comparison of Maraging Steel Micro- and Nanostructure Produced Conventionally and by Laser Additive Manufacturing
2016
Application of corrosion inhibitors for steels in acidic media for the oil and gas industry: A review
2014 Standout
Enhancement of corrosion resistance of a biomedical grade 316LVM stainless steel by potentiodynamic cyclic polarization
2007
Synthesis and characterization of red mud and rice husk ash-based geopolymer composites
2012 Standout
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
Atomic emission spectroelectrochemistry applied to dealloying phenomena: I. The formation and dissolution of residual copper films on stainless steel
2009
Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments
2022 Standout
The history of the Point Defect Model for the passive state: A brief review of film growth aspects
2010 Standout
Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution
2018 Standout
The corrosion behaviour of austenitic and duplex stainless steels in artificial saliva with the addition of fluoride
2010
Cleaner red mud residue production at an alumina plant by applying experimental design techniques in the filtration stage
2011
Electrochemical and XPS study of polyethyleneimines of different molecular sizes as corrosion inhibitors for AISI 430 stainless steel in near-neutral chloride media
2009
The composition, recycling and utilisation of Bayer red mud
2018 Standout
Combinatorial Alloy Design by Laser Additive Manufacturing
2016
Inhibition effect of chromate on the passivation and pitting corrosion of a duplex stainless steel in LiBr solutions using electrochemical techniques
2007
Steels in additive manufacturing: A review of their microstructure and properties
2019
Corrosion of Al CoCrFeNi high-entropy alloys: Al-content and potential scan-rate dependent pitting behavior
2017 Standout
Transmission Electron Microscopy Study of Aqueous Film Formation and Evolution on Magnesium Alloys
2014
Electrochemical study on the corrosion behaviour of a new low-nickel stainless steel in carbonated alkaline solution in the presence of chlorides
2014
Effect of Grain Size on Corrosion: A Review
2010 Standout
Corrosion behaviour of low-nickel austenitic stainless steels reinforcements: A comparative study in simulated pore solutions
2006
A Novel Approach to Characterizing the Corrosion Resistance of Super Duplex Stainless Steel Welds
2002
Photoelectrochemical analysis of the effects of pH and sulfate ions on the structure and the composition of the passive film formed on Fe-20Cr-15Ni alloy
2009
Corrosion behaviour of nanocrystalline 304 stainless steel prepared by equal channel angular pressing
2011
High-entropy alloys
2019 Standout
Effects of tantalum ion implantation on the corrosion behavior of AZ31 magnesium alloys
2006
Microstructure and corrosion properties of laser-melted deposited Ti2Ni3Si/NiTi intermetallic alloy
2007
Nanomaterials: a review of synthesis methods, properties, recent progress, and challenges
2021 Standout
Passivity breakdown, pit initiation and propagation of pits in metallic materials – Review
2014 Standout
Comparative effect of grain size and texture on the corrosion behaviour of commercially pure titanium processed by equal channel angular pressing
2009
Works of G. Peña being referenced
Laser surface melting: A suitable technique to repair damaged surfaces made in 14 Ni (200 grade) maraging steel
2012
An XPS analysis of the oxide surface layers formed on a friction stir processed magnesium alloy
2012
Intergranular corrosion susceptibility of austenitic–ferritic duplex stainless steels: application of potentiokinetic reactivation tests
1993
Electrochemical Impedance Spectroscopy as a Tool for Studying Steel Corrosion Inhibition in Simulated Concrete Environments—Red Mud Used as Rebar Corrosion Inhibitor
2005
Comparative study of passive films of different stainless steels developed on alkaline medium
2004
The effect of Ni in the electrochemical properties of oxide layers grown on stainless steels
2005
Galvanic coupling between carbon steel and austenitic stainless steel in alkaline media
2002
Influence of chromium and cerium implantation in the electrochemical development of passive layers on AISI 304L
2004
High frequency impedance spectroscopy study of passive films formed on AISI 316 stainless steel in alkaline medium
2004
An XPS study on the influence of nitrogen implantation on the passive layers developed on different tempers of AA7075 aluminum alloy
2010
On the corrosion mechanism of AISI 204Cu stainless steel in chlorinated alkaline media
2008
Long-term behaviour of AISI 304L passive layer in chloride containing medium
2006