Citation Impact
Citing Papers
A physical model for the inelasticity of concrete
1982
Three-dimensional limit analysis of rigid blocks assemblages. Part II: Load-path following solution procedure and validation
2005
A Novel Artificial Bee Colony Algorithm Based on Modified Search Equation and Orthogonal Learning
2012 Standout
Bone poroelasticity
1999
Bifurcations in elastic-plastic materials
1993
Numerical Simulation of Mixed-Mode Progressive Delamination in Composite Materials
2003 Standout
Material interpolation schemes in topology optimization
1999 Standout
A bonded-particle model for rock
2004 Standout
Discontinuous dynamical systems
2008 Standout
Computations on historic masonry structures
2002 Standout
Multisurface thermoplasticity for single crystals at large strains in terms of eulerian vector updates
1996
Engineering and Economic Applications of Complementarity Problems
1997
Plastic-Damage Model for Cyclic Loading of Concrete Structures
1998 Standout
A plastic-damage model for concrete
1989 Standout
A Galerkin boundary contour method for two-dimensional linear elasticity
1999
FUNDAMENTAL ISSUES IN FINITE ELEMENT ANALYSES OF LOCALIZATION OF DEFORMATION
1993
An integrated algorithm based on artificial bee colony and particle swarm optimization
2010 Standout
A review of techniques, advances and outstanding issues in numerical modelling for rock mechanics and rock engineering
2003 Standout
Limit analysis of frictional block assemblies as a mathematical program with complementarity constraints
2001
A critical review of established methods of structural topology optimization
2008 Standout
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
2009 Standout
EXPONENTIAL MAP ALGORITHM FOR STRESS UPDATES IN ANISOTROPIC MULTIPLICATIVE ELASTOPLASTICITY FOR SINGLE CRYSTALS
1996
Wave Propagation in a Strain‐Softening Bar:Exact Solution
1985
Computational modelling of impact damage in brittle materials
1996 Standout
Limit analysis of masonry block structures with non-associative frictional joints using linear programming
2006
Softening in Reinforced Concrete Beams and Frames
1987
Collapse behaviour of three-dimensional brick-block systems using non-linear programming
2000
A boundary element formulation in time domain for viscoelastic solids
1999
Nonlinear system identification in structural dynamics: 10 more years of progress
2016 Standout
Bounds to bifurcation stresses in solids with non-associated plastic flow law at finite strain
1981
Continuum Theory for Strain‐Softening
1984
Experimental investigation of tuff masonry panels reinforced with surface bonded basalt textile-reinforced mortar
2016 Standout
Generating optimal topologies in structural design using a homogenization method
1988 Standout
Application of Fractional Calculus for Dynamic Problems of Solid Mechanics: Novel Trends and Recent Results
2009 Standout
Structural Analysis of Masonry Historical Constructions. Classical and Advanced Approaches
2010 Standout
Discrete Element Modeling of Masonry Structures
2007 Standout
Analytical integrations for two-dimensional elastic analysis by the symmetric Galerkin boundary element method
1999
Optimal shape design as a material distribution problem
1989 Standout
Description of inelastic deformation and degradation of concrete
1988
Crystal plasticity finite element simulations of pyramidal indentation in copper single crystals
2006
Parameter identification in explicit structural dynamics: performance of the extended Kalman filter
2004
On computational procedures for the force method
1982
Numerical solution of saddle point problems
2005 Standout
On constitutive inequalities for simple materials—I
1968
A higher-order nonlocal elasticity and strain gradient theory and its applications in wave propagation
2015 Standout
Nonlocal Damage Theory
1987 Standout
Three-dimensional limit analysis of rigid blocks assemblages. Part I: Torsion failure on frictional interfaces and limit analysis formulation
2005
Modeling and simulation of crack propagation in mixed-modes interlaminar fracture specimens
1996
Back-analysis of viscoelastic displacements in a soft rock road tunnel
2001
TREMURI program: An equivalent frame model for the nonlinear seismic analysis of masonry buildings
2013 Standout
Estimation of parameters in geotechnical backanalysis — I. Maximum likelihood approach
1996
An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models
2006 Standout
Homogenised limit analysis of masonry walls, Part I: Failure surfaces
2005
Occurrence of spurious mechanisms in computations of strain‐softening solids
1989
Estimating mechanical rock mass parameters relating to the Three Gorges Project permanent shiplock using an intelligent displacement back analysis method
2000
A constitutive theory for the inelastic behavior of concrete
1985
Limit Analysis for No-Tension and Frictional Three-Dimensional Discrete Systems*
1998
Convexity conditions and existence theorems in nonlinear elasticity
1976 Standout
Hyperelastic modelling of arterial layers with distributed collagen fibre orientations
2005 Standout
Analytical integrations of hypersingular kernel in 3D BEM problems
2001
Analysis of the cup-cone fracture in a round tensile bar
1984 Standout
Nature’s hierarchical materials
2007 Standout
Review: Calibration of the discrete element method
2017 Standout
A simple displacement control technique for pushover analyses
2006
Unified thermodynamic framework for nonlocal/gradient continuum theories
2003
Calibrating the microscopic properties of quartz sand with coupled CFD-DEM framework
2016
Ultrasonic nondestructive evaluation of microstructural changes of solid materials under plastic deformation—Part I. Theory
1998 StandoutNobel
A note on nonassociated plastic flow rules
1989
Non‐smooth multisurface plasticity and viscoplasticity. Loading/unloading conditions and numerical algorithms
1988
Multisurface Interface Model for Analysis of Masonry Structures
1997 Standout
Associated and non‐associated constitutive relations for undrained behaviour of isotropic soft clays
1978
Micro–macro properties of quartz sand: Experimental investigation and DEM simulation
2014
Homogenization Approach for the Limit Analysis of Out-of-Plane Loaded Masonry Walls
2006
An equivalent model and back-analysis technique for modelling in situ consolidation behavior of drainage-installed soft deposits
1997
Generalized plasticity and the modelling of soil behaviour
1990 Standout
Mechanical properties and numerical modeling of Fabric Reinforced Cementitious Matrix (FRCM) systems for strengthening of masonry structures
2013
Optimization techniques for identifying soil parameters in geotechnical engineering: Comparative study and enhancement
2017
PARAMETER AND VARIANCE ESTIMATION IN GEOTECHNICAL BACKANALYSIS USING PRIOR INFORMATION
1996
Cohesive crack model description of ductile to brittle size-scale transition: dimensional analysis vs. renormalization group theory
2003
A Finite Element Method for the Optimal Design of Variable Thickness Sheets
1973
State-of-the-art on strengthening of masonry structures with textile reinforced mortar (TRM)
2018 Standout
Soil-tunnel interaction modelling for shield tunnels considering shearing dislocation in longitudinal joints
2018 Standout
A non-local model with tension and compression damage mechanisms
2001
Structural inverse analysis by hybrid simplex artificial bee colony algorithms
2009
Works of G. Maier being referenced
Kinematic Limit Analysis of Periodic Heterogeneous Media
2000
Diagnostic Inverse Analysis of Concrete Dams with Statical Excitation
2004
Symmetric Galerkin boundary element method for quasi-brittle-fracture and frictional contact problems
1993
Poroelastic finite element analysis of a bone specimen under cyclic loading
1999
A matrix structural theory of piecewise linear elastoplasticity with interacting yield planes
1970
Parameter estimation of a static geotechnical model using a Bayes' approach
1983
Symmetric Galerkin boundary element method in plasticity and gradient plasticity
1995
Incremental plastic analysis in the presence of large displacements and physical instabilizing effects
1971
Equilibrium Branching Due to Flexural Softening
1973
Dynamic shakedown analysis and bounds for elastoplastic structures with nonassociative, internal variable constitutive laws
1995
A symmetric boundary integral approach to transient poroelastic analysis
1997
Identification of elastic stiffness and local stresses in concrete dams by in situ tests and neural networks
2005
Behavior of Elastic-Plastic Trusses with Unstable Bars
1966
A galerkin symmetric boundary‐element method in elasticity: Formulation and implementation
1992
Extremum theorems for the analysis of elastic plastic structures containing unstable elements
1967
Engineering Plasticity by Mathematical Programming
1981
Shakedown theory in perfect elastoplasticity with associated and nonassociated flow-laws: A finite element, linear programming approach
1969
Direct search solution of an inverse problem in elastoplasticity: Identification of cohesion, friction angle and in situ stress by pressure tunnel tests
1980
A matrix structural theory of piecewise linear elastoplasticity with interacting yield planes
1970
Nonassociated and coupled flow rules of elastoplasticity for rock-like materials
1979
BIFURCATIONS AND INSTABILITIES IN FRACTURE OF COHESIVE‐SOFTENING STRUCTURES: A BOUNDARY ELEMENT ANALYSIS†
1992
On elastic-plastic structures with associated stress-strain relations allowing for work softening
1967
Mathematical programming methods for the inelastic analysis of reinforced concrete frames allowing for limited rotation capacity
1972
Parameter identification in anisotropic elastoplasticity by indentation and imprint mapping
2004
Mathematical programming methods for deformation analysis at plastic collapse
1977
A finite element approach to optimal design of plastic structures in plane stress
1972
Elastic–plastic and limit-state analyses of frames with softening plastic-hinge models by mathematical programming
2003
A theory of no-tension discretized structural systems
1990
Inverse Analyses in Fracture Mechanics
2006
Incremental boundary value problems in the presence of coupling of elastic and plastic deformations: A rock mechanics oriented theory
1977
Health Assessment of Concrete Dams by Overall Inverse Analyses and Neural Networks
2006
Incremental elastoplastic analysis and quadratic optimization
1970
Boundary integral equation analysis in linear viscoelasticity: variational and saddle point formulations
1991
A minimum principle for incremental elastoplasticity with non-associated flow laws
1970
A Galerkin approach to boundary element elastoplastic analysis
1987
Effects of Geometry Change on Essential Features of Inelastic Behavior
1973
Symmetric Galerkin Boundary Element Methods
1998
On model identification problems in rock mechanics
1977
Parameter identification of a cohesive crack model by Kalman filter
2002
A quadratic programming approach for certain classes of non linear structural problems
1968
Flat-jack tests and inverse analysis for the identification of stress states and elastic properties in concrete dams
2007
Normality Relations and Convexity of Yield Surfaces for Unstable Materials or Structural Elements
1967