Citation Impact
Citing Papers
Pitting inhibition of stainless steel by surfactants: an electrochemical and surface chemical approach
2003
Recent developments in stainless steels
2009 Standout
Segregation of alloying elements in passive systems—I. XPS studies on the Ni–W system
1998
Oxide networks, graph theory, and the passivity of binary alloys
2002
Electrochemical characterisation of a martensitic stainless steel in a neutral chloride solution
2012
Passive films on stainless steels—chemistry, structure and growth
2003 Standout
Electrochemical and XPS studies of the passive film formed on stainless steels in borate buffer and chloride solutions
2006
Adsorbed layer and thin film growth modes monitored by Auger electron spectroscopy
1989
Semiconductive behavior of passive films formed on pure Cr and Fe–Cr alloys in sulfuric acid solution
2002
Hydrogen Embrittlement Understood
2015 Standout
Recent advancements in Pt and Pt-free catalysts for oxygen reduction reaction
2015 Standout
Atomic Layer Deposition: An Overview
2009 Standout
Binder jet 3D printing—Process parameters, materials, properties, modeling, and challenges
2020 Standout
Effect of Cefazolin on the corrosion of mild steel in HCl solution
2009 Standout
The history of the Point Defect Model for the passive state: A brief review of film growth aspects
2010 Standout
Liquid–metal-induced fracture mode of martensitic T91 steels
2012
Electrooxidation of stainless steel AISI 304 in carbonate aqueous solution at pH 8
1996
Electrochemical Studies of the Adsorption Behavior of Bovine Serum Albumin on Stainless Steel
1999
X-ray photoelectron spectroscopy: Towards reliable binding energy referencing
2019 Standout
Corrosion behavior of an equiatomic CoCrFeMnNi high-entropy alloy compared with 304 stainless steel in sulfuric acid solution
2018 Standout
Influence of temperature on the electrochemical and passivation behavior of 2507 super duplex stainless steel in simulated desulfurized flue gas condensates
2017
Effects of tensile and compressive stresses on the passive layers formed on a type 302 stainless steel in a normal sulphuric acid bath
1995
Biodegradable metals
2014 Standout
Electrochemical study of the passive behaviour of Ni–Cr alloys in a borate solution—a mixed-conduction model approach
2001
Step-by-Step Synthesis of Non-Noble Metal Electrocatalysts for O2 Reduction under Proton Exchange Membrane Fuel Cell Conditions
2007
Microstructure and electrochemical properties of high entropy alloys—a comparison with type-304 stainless steel
2004 Standout
Powder bed charging during electron-beam additive manufacturing
2016
Photoelectrochemical analysis of the effects of pH and sulfate ions on the structure and the composition of the passive film formed on Fe-20Cr-15Ni alloy
2009
Technological challenges and progress in nanomaterials plasma surface modification – A review
2019
Nanomaterials: a review of synthesis methods, properties, recent progress, and challenges
2021 Standout
Quantitative analysis of the inelastic background in surface electron spectroscopy
1988
Works of G. Lorang being referenced
AES depth profiling of passive overlayers formed on nickel alloys
1990
Chemical Composition of Passive Films on AISI 304 Stainless Steel
1994
Role of oxidation on LME of T91 steel studied by small punch test
2008
Surface modification of polyethylene powder by nitrogen and ammonia low pressure plasma in a fluidized bed reactor
2004
Quantitative Auger analysis of passive films formed on stainless steels
1988
Liquid metal embrittlement susceptibility of T91 steel by lead?bismuth
2005
Effect of contact conditions on embrittlement of T91 steel by lead–bismuth
2004
An important step in quantitative auger analysis: The use of peak to background ratio
1984
Analytical and electrochemical study of passive films formed on nickel—chromium alloys: Influence of the chromium bulk concentration
1994
Influence of temperature on the properties of passive films formed on AISI 304 stainless steel
1991
Depth information in Auger electron spectroscopy
1985