Citation Impact
Citing Papers
Heat transfer characteristics of microencapsulated phase change material slurry in laminar flow under constant heat flux
2009
Pharmaceutical Particle Engineering via Spray Drying
2007 Standout
Climate adaptive building shells: State-of-the-art and future challenges
2013 Standout
Advanced Materials for Energy Storage
2010 Standout
Techniques for therapeutic hypothermia during transport and in hospital for perinatal asphyxial encephalopathy
2010
Applications of ionic liquids in the chemical industry
2007 Standout
Effect of microencapsulated phase change materials on the thermo-mechanical properties of poly(methyl-methacrylate) based biomaterials
2006
Microencapsulation of higher hydrocarbon phase change materials byin situpolymerization
2005
Thermal performance of microencapsulated phase change material slurry in turbulent flow under constant heat flux
2006
Maximisation of heat transfer in a coil in tank PCM cold storage system
2011
Paraffin/diatomite/multi-wall carbon nanotubes composite phase change material tailor-made for thermal energy storage cement-based composites
2014
Research progress on CNTs/CNFs-modified cement-based composites – A review
2019 Standout
Thermoregulating response of cotton fabric containing microencapsulated phase change materials
2010
Materials used as PCM in thermal energy storage in buildings: A review
2011 Standout
Phase change materials integrated in building walls: A state of the art review
2014 Standout
Verification of a T-history installation to measure enthalpy versus temperature curves of phase change materials
2006
Phase change materials for smart textiles – An overview
2007 Standout
The Evaluation of Peak Shaving by a Thermal Storage System Using Phase-Change Materials in Air Distribution Systems
2006
Thermal Properties and Long-term Reliability of Capric Acid/Lauric Acid and Capric Acid/Myristic Acid Mixtures for Thermal Energy Storage
2008
Thermal characteristics of magnesium nitrate hexahydrate and magnesium chloride hexahydrate mixture as a phase change material for effective utilization of urban waste heat
2003
Long term thermal stability of organic PCMs
2014
Falling liquid films in absorption machines
1993
Crystallisation, melting, recrystallisation and polymorphism of n-eicosane for application as a phase change material
2006
Review on multi-criteria decision analysis aid in sustainable energy decision-making
2009 Standout
Bio-Inspired Strategies for Anti-Icing
2014 Standout
Evaluation of paraffin/water emulsion as a phase change slurry for cooling applications
2009
Experimental analysis of a paraffin-based cold storage tank
2013
Energy storage technologies and real life applications – A state of the art review
2016 Standout
Thermal Energy Storage Characteristics of Myristic and Stearic Acids Eutectic Mixture for Low Temperature Heating Applications
2006
A review of absorption refrigeration technologies
2001 Standout
Effect of surfactant on falling film absorption
1993
Experimental assessment of heat storage properties and heat transfer characteristics of a phase change material slurry for air conditioning applications
2009
Preparation and thermal characterization of expanded graphite/paraffin composite phase change material
2010
Preparation and thermal properties of n-octadecane/molecular sieve composites as form-stable thermal energy storage materials for buildings
2012
Organic phase change materials and their textile applications: An overview
2012
Performance analysis on industrial refrigeration system integrated with encapsulated PCM-based cool thermal energy storage system
2007
Preparation and characterization of flame retardant form-stable phase change materials composed by EPDM, paraffin and nano magnesium hydroxide
2010
Study of a floor supply air conditioning system using granular phase change material to augment building mass thermal storage—Heat response in small scale experiments
2005 Standout
A review on effect of phase change material encapsulation on the thermal performance of a system
2012
Thermal characteristics of a direct heat exchange system between granules with phase change material and air
2004
High latent heat storage and high thermal conductive phase change materials using exfoliated graphite nanoplatelets
2008
Properties of aqueous solutions of lithium and calcium chlorides: formulations for use in air conditioning equipment design
2004
Phase change and heat transfer characteristics of a eutectic mixture of palmitic and stearic acids as PCM in a latent heat storage system
2003
A review of chemical heat pumps, thermodynamic cycles and thermal energy storage technologies for low grade heat utilisation
2012
Use of a wave model to evaluate falling film absorber efficiency
1991
Experimental study on melting/solidification characteristics of a paraffin as PCM
2006
A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS)
2009 Standout
Thermal management analysis of a Li-ion battery cell using phase change material loaded with carbon fibers
2016
A combined experimental and simulation study on charging process of Erythritol–HTO direct-blending based energy storage system
2014
Peak load shifting with energy storage and price-based control system
2015
A review of power battery thermal energy management
2011 Standout
Thermal characteristics of a eutectic mixture of myristic and palmitic acids as phase change material for heating applications
2003
Thermal energy recovery of air conditioning system––heat recovery system calculation and phase change materials development
2004 Standout
Micro/nanoencapsulated n-nonadecane with poly(methyl methacrylate) shell for thermal energy storage
2014
Circulating fluidized bed heat recovery/storage and its potential to use coated phase-change-material (PCM) particles
2013
Investigation of the effect of dynamic melting in a tube-in-tank PCM system using a CFD model
2014
Phase equilibrium in the design of phase change materials for thermal energy storage: State-of-the-art
2017
Cooling for newborns with hypoxic ischaemic encephalopathy
2013 Standout
Solid–liquid phase equilibria of (n-octadecane with myristic, and palmitic acid) binary mixtures used as phase change materials (PCMs)
2016
Review on thermal energy storage with phase change materials (PCMs) in building applications
2011 Standout
Phase change materials for thermal energy storage
2014 Standout
Thermal enhancement of plastering mortars with Phase Change Materials: Experimental and numerical approach
2012
Micro/nano encapsulation of some paraffin eutectic mixtures with poly(methyl methacrylate) shell: Preparation, characterization and latent heat thermal energy storage properties
2014
Development of an absorption heat pump water heater using an aqueous ternary hydroxide working fluid
1991
Solar energy storage using phase change materials☆
2006 Standout
Review of thermal energy storage for air conditioning systems
2012
Mechanical Properties and Melting Heat Transfer Characteristics of Shape-Stabilized Paraffin Slurry
2013
An overview of thermal energy storage systems
2017 Standout
Preparation and properties of palmitic acid/SiO2 composites with flame retardant as thermal energy storage materials
2011
Numerical Simulation of Film Coating Process in a Novel Rotating Fluidized Bed
2006
The Maxwell-Stefan approach to mass transfer
1997
Lauric and myristic acids eutectic mixture as phase change material for low-temperature heating applications
2005
Thermal energy storage materials and systems for solar energy applications
2016 Standout
High-temperature phase change materials for thermal energy storage
2009 Standout
A STUDY ON THERMAL CHARACTERISTICS OF THERMAL STORAGE TANK USING PHASE CHANGE MATERIAL INSTALLED IN AN AIR DISTRIBUTION SYSTEM
2001
Using the third state of matter: high harmonic generation from liquid targets
2014 StandoutNobel
A review on phase change materials integrated in building walls
2010
Graphene/Polymer Nanocomposites
2010 Standout
Thermal energy storage performance of paraffin in a novel tube-in-shell system
2007
Capric Acid and Myristic Acid for Latent Heat Thermal Energy Storage
2008
Influence of accuracy of thermal property data of a phase change material on the result of a numerical model of a packed bed latent heat storage with spheres
2005
25th Anniversary Article: Galvanic Replacement: A Simple and Versatile Route to Hollow Nanostructures with Tunable and Well‐Controlled Properties
2013 Standout
Consumer Perceptions of Price, Quality, and Value: A Means-End Model and Synthesis of Evidence
1988 Standout
Melting and solidification characteristics of a mixture of two types of latent heat storage material in a vessel
2016
Microencapsulation of butyl stearate as a phase change material by interfacial polycondensation in a polyurea system
2008
Combining thermal energy storage with buildings – a review
2014
Experimental evaluation of energy and exergy efficiency of a seasonal latent heat storage system for greenhouse heating
2004
Experimental study on heat capacity of paraffin/water phase change emulsion
2010
Thermal energy storage for low and medium temperature applications using phase change materials – A review
2016 Standout
Review on thermal energy storage with phase change materials and applications
2008 Standout
Thermal Properties and Thermal Reliability of Capric Acid/Stearic Acid Mixture for Latent Heat Thermal Energy Storage
2009
THERMAL PROPERTIES OF MULTICOMPONENT FATTY ACIDS AS SOLID-LIQUID PHASE CHANGE MATERIALS FOR COOLING APPLICATIONS
2006
Developments in organic solid–liquid phase change materials and their applications in thermal energy storage
2015
Enhancement of heat transfer for thermal energy storage application using stearic acid nanocomposite with multi-walled carbon nanotubes
2013
Thermophysical and heat transfer properties of phase change material candidate for waste heat transportation system
2007
A review on compressed air energy storage: Basic principles, past milestones and recent developments
2016 Standout
Review of cold storage materials for air conditioning application
2012
District heating and cooling optimization and enhancement – Towards integration of renewables, storage and smart grid
2017
A review of solar collectors and thermal energy storage in solar thermal applications
2012 Standout
Assessment of the Thermal Energy Storage in Friedrichshafen District Energy Systems
2017
Preparation and thermal properties of capric acid/palmitic acid eutectic mixture as a phase change energy storage material
2007
Effect of porosity and the inlet heat transfer fluid temperature variation on the performance of cool thermal energy storage system
2006
Study on paraffin/expanded graphite composite phase change thermal energy storage material
2005
Latent Heat Storage Materials and Systems: A Review
2005
Justifying the significance of Knudsen diffusion in solid oxide fuel cells
2015 StandoutNobel
Thermal conductivity enhancement of phase change materials for thermal energy storage: A review
2010 Standout
Optimization methods applied to renewable and sustainable energy: A review
2011 Standout
State of the art on high temperature thermal energy storage for power generation. Part 1—Concepts, materials and modellization
2009 Standout
Sodium laurate enhancements the thermal properties and thermal conductivity of eutectic fatty acid as phase change material (PCM)
2013
Halloysite Clay Nanotubes for Loading and Sustained Release of Functional Compounds
2015 Standout
Carbon materials for structural self-sensing, electromagnetic shielding and thermal interfacing
2012 Standout
Thermal cycling test of few selected inorganic and organic phase change materials
2008
Lauric and palmitic acids eutectic mixture as latent heat storage material for low temperature heating applications
2004
Latent Heat Storage in a Two-Phase Thermosyphon Solar Water Heater
2005
Review on concentrating solar power plants and new developments in high temperature thermal energy storage technologies
2015 Standout
Thermal energy storage technologies and systems for concentrating solar power plants
2013 Standout
A review on phase change cold storage in air-conditioning system: Materials and applications
2013
Preparation and thermal energy properties of paraffin/halloysite nanotube composite as form-stable phase change material
2012
Thermal performance simulations of a packed bed cool thermal energy storage system using n-tetradecane as phase change material
2010
Latent heat thermal energy storage using cylindrical capsule: Numerical and experimental investigations
2005
Calorimetric evaluation of phase change materials for use as thermal interface materials
2001
Thermal stability of phase change materials used in latent heat energy storage systems: A review
2012
Using the fuzzy multi-criteria model to select the optimal cool storage system for air conditioning
2008
A global review of energy consumption, CO 2 emissions and policy in the residential sector (with an overview of the top ten CO 2 emitting countries)
2014 Standout
Discrete particle simulation of particulate systems: A review of major applications and findings
2008 Standout
Recent developments in phase change materials for energy storage applications: A review
2018 Standout
Heat transfer characteristics of thermal energy storage system using PCM capsules: A review
2007
Review on phase change materials (PCMs) for cold thermal energy storage applications
2012 Standout
A review on phase change material (PCM) for sustainable passive cooling in building envelopes
2016 Standout
Effect of expanded graphite on properties of high-density polyethylene/paraffin composite with intumescent flame retardant as a shape-stabilized phase change material
2009
Works of Fredrik Setterwall being referenced
Therapeutic hypothermia can be induced and maintained using either commercial water bottles or a "phase changing material" mattress in a newborn piglet model
2009
Liquid–solid phase equilibrium study of tetradecane and hexadecane binary mixtures as phase change materials (PCMs) for comfort cooling storage
2003
Gas-phase controlled convective drying of solids wetted with multicomponent liquid mixtures
1991
Technical grade paraffin waxes as phase change materials for cool thermal storage and cool storage systems capital cost estimation
2002
Direct contact PCM–water cold storage
2010
Phase transition temperature ranges and storage density of paraffin wax phase change materials
2004
The coating of particles in a fluidized bed (residence time distribution in a system of two coupled perfect mixers)
1989
Surface tension of lithium bromide solutions with heat-transfer additives
1991
Compact Heat Storage for Solar Heating Systems
2009
Model for dimensioning a falling film absorber in an absorption heat pump
1988
Tetradecane and hexadecane binary mixtures as phase change materials (PCMs) for cool storage in district cooling systems
1999