Citation Impact
Citing Papers
Development of cement-based lightweight composites – Part 1: Mix design methodology and hardened properties
2013
Opportunities and challenges in the use of coal fly ash for soil improvements – A review
2014 Standout
Prediction of mechanical properties of green concrete incorporating waste foundry sand based on gene expression programming
2019 Standout
Composition and density of nanoscale calcium–silicate–hydrate in cement
2007 Standout
EFEK PROGRAM PISA TERHADAP KURIKULUM DI INDONESIA
2019 Standout
Removal of cement mortar remains from recycled aggregate using pre-soaking approaches
2006
Traditional, state-of-the-art and renewable thermal building insulation materials: An overview
2019 Standout
A Review on Nanomaterial Dispersion, Microstructure, and Mechanical Properties of Carbon Nanotube and Nanofiber Reinforced Cementitious Composites
2013 Standout
Quantification of the water demand of sand in mortar
2004
Effect of Fly Ash and Silica Fume on Compressive and Fracture Behaviors of Concrete
1998
Partial-interaction time dependent behaviour of reinforced concrete beams
2012
Optimization of high-performance concrete structures by variable neighborhood search
2013
Particle size effect on the strength of rice husk ash blended gap-graded Portland cement concrete
2004
Effects of using recycled concrete aggregates on the shrinkage of high performance concrete
2016
Microstructural investigation of deteriorated Portland cement concretes
1996
29Si and 27Al high-resolution NMR characterization of calcium silicate hydrate phases in activated blast-furnace slag pastes
2001
Strain and damage sensing properties on multifunctional cement composites with CNF admixture
2013 Standout
Performance enhancement of recycled concrete aggregate – A review
2015 Standout
Lightweight concrete containing thermal power station and stone quarry waste
2003
Review: Improving cement-based materials by using silica fume
2002
A stress–strain model for uniaxial and confined concrete under compression
2012
Flow, water absorption, and mechanical characteristics of normal- and high-strength mortar incorporating fine bottom ash aggregates
2011
Nanocomposites: synthesis, structure, properties and new application opportunities
2009 Standout
Influence of seawater and blast furnace cement employment on recycled aggregate concretes’ properties
2016
Lightweight aggregate concrete fiber reinforcement – A review
2012
Biomass fly ash in concrete: Mixture proportioning and mechanical properties
2007 Standout
Construction and demolition waste generation and properties of recycled aggregate concrete: A global perspective
2018 Standout
Influence of Type and Replacement Level of Recycled Aggregates on Concrete Properties
2008 Standout
Diversifying two-stage mixing approach (TSMA) for recycled aggregate concrete: TSMAs and TSMAsc
2007
Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete
2015 Standout
Mechanical properties of high-strength steel fiber-reinforced concrete
2004 Standout
Behavior of recycled aggregate concrete-filled basalt and carbon FRP tubes
2015
An Iterative Approach for the Optimization of Pavement Maintenance Management at the Network Level
2014 Standout
Experimental analysis of properties of high performance recycled aggregate concrete
2013
Development of corn cob ash blended cement
2008 Standout
An overview of study on recycled aggregate concrete in China (1996–2011)
2012 Standout
Mechanical and fracture properties of normal- and high-strength concretes with fly ash after exposure to high temperatures
2009
Effect of aspect ratio on strain sensing capacity of carbon fiber reinforced cement composites
2013 Standout
A review on the utilization of fly ash
2009 Standout
Improved piezoresistive sensitivity and stability of CNT/cement mortar composites with low water–binder ratio
2014 Standout
The use of thermal analysis in assessing the effect of temperature on a cement paste
2005 Standout
Properties of concrete incorporating fine recycled aggregate
2004
Electrically conductive cement-based materials
2004 Standout
A contribution to understanding the effects of curing temperature on the mechanical properties of mine cemented tailings backfill
2010 Standout
Limit States and Service Life of Cement Renders on Façades
2011 Standout
Mechanical properties of concrete at high temperature—A review
2015 Standout
Effective Young's modulus estimation of concrete
1999
An experimental study on strength development of concrete containing fly ash and optimum usage of fly ash in concrete
2005
Utilization of coal combustion by-products in sustainable construction materials
2010
Recycled aggregate from C&D waste & its use in concrete – A breakthrough towards sustainability in construction sector: A review
2014 Standout
Effect of transition zone on elastic moduli of concrete materials
1996
Finite element modelling of concrete-filled steel stub columns under axial compression
2013 Standout
Effects of interfacial transition zones on the stress–strain behavior of modeled recycled aggregate concrete
2013 Standout
An analytical model for stress–strain behavior of confined concrete
2005
Partial replacement of carbon fiber by carbon black in multifunctional cement–matrix composites
2007 Standout
Effect of recycled concrete coarse aggregate from multiple sources on the hardened properties of concrete with equivalent compressive strength
2013
Variation in mechanical properties of natural and recycled aggregate concrete as related to the strength of their binding mortar
2005
Cement-matrix structural nanocomposites
2004
Hydration and microstructure of ultra high performance concrete incorporating rice husk ash
2011
Properties and composition of recycled aggregates from construction and demolition waste suitable for concrete production
2014 Standout
Mix design and properties assessment of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC)
2013 Standout
Pore size distribution and degree of hydration of metakaolin–cement pastes
2000
Evaluation of ultimate conditions of FRP-confined concrete columns using genetic programming
2015
Metakaolin and calcined clays as pozzolans for concrete: a review
2001 Standout
Normal- and high-strength concretes incorporating air-cooled blast furnace slag coarse aggregates: Effect of slag size and content on the behavior
2016
Long-term strengths of concrete with oil palm shell as coarse aggregate
2001
Thermal conductivity of concrete – A review
2018 Standout
Microstructural analysis of recycled aggregate concrete produced from two-stage mixing approach
2004
The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation
2005 Standout
Failure processes of modeled recycled aggregate concrete under uniaxial compression
2012
Comparison of ASTM saturation techniques for measuring the permeable porosity of concrete
2004
Influence of steam curing on the pore structures and mechanical properties of fly-ash high performance concrete prepared with recycled aggregates
2016
Relationship between differences in silica fume additives and fine-scale microstructural evolution in cement based materials
1998
The effect of two types of C-S-H on the elasticity of cement-based materials: Results from nanoindentation and micromechanical modeling
2003 Standout
Effect of expanded perlite on the mechanical properties and thermal conductivity of lightweight concrete
2010
Works of F.D. Lydon being referenced
Some factors affecting the dynamic modulus of elasticity of high strength concrete
1995
Effects of silica fume and aggregate size on the brittleness of concrete
1996
Evaluation of strains at peak stresses in concrete: A three-phase composite model approach
1998
Some observations on elastic properties of plain concrete
1986
Mix proportions for high strength concrete
1996
Concrete mix design
1972
Combined Effects of Silica Fume, Aggregate Type, and Size on Post-Peak Response of Concrete in Bending
1999
Advances in concrete technology
1993
Effect of coarse aggregate on elastic modulus and compressive strength of high performance concrete
1995
Fracture properties of high strength concrete with varying silica fume content and aggregates
1995