Citation Impact
Citing Papers
Additively manufactured hierarchical stainless steels with high strength and ductility
2017 Standout
Recent developments in stainless steels
2009 Standout
Accident tolerant fuels for LWRs: A perspective
2013 Standout
Radiation-induced degradation of stainless steel light water reactor internals
2012
Temperature dependence of martensitic transformation in austenitic stainless steel
2003
Manganese as an austenite stabilizer in FeCrMnC steels
1988
Formation and stability of radiation-induced phases in neutron-irradiated austenitic and ferritic steels
1989
The influence of fast neutron irradiation and irradiation temperature on the tensile properties of wrought LCAC and TZM molybdenum
2005
Effects of Mn and Al contents on cryogenic-temperature tensile and Charpy impact properties in four austenitic high-Mn steels
2015 Standout
Advances in void swelling and helium bubble physics
1984
A review of irradiation effects on LWR core internal materials – Neutron embrittlement
2011
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
Derivation and Variation in Composition-Dependent Stacking Fault Energy Maps Based on Subregular Solution Model in High-Manganese Steels
2009 Standout
Overview of microstructural evolution in neutron-irradiated austenitic stainless steels
1993
Ferritic/martensitic steels for next-generation reactors
2007
Temperature dependence of strain hardening and plastic instability behaviors in austenitic stainless steels
2004
Detection of martensite transformation in high temperature compressively deformed austenitic stainless steel by magnetic NDE technique
2003
The Serpent Monte Carlo code: Status, development and applications in 2013
2014 Standout
Tritium diffusion and trapping associated with lithium in Al-Li systems
1988 StandoutNobel
Recent advances in friction-stir welding – Process, weldment structure and properties
2008 Standout
Deformation in metals after low-temperature irradiation: Part I – Mapping macroscopic deformation modes on true stress–dose plane
2008
Materials to deliver the promise of fusion power – progress and challenges
2004
Effects of V-Notch Dimensions on Charpy Impact Test Results for Differently Sized Miniature Specimens of Ferritic Steel
1993
Structural materials for fission & fusion energy
2009 Standout
The transport and fate of helium in nanostructured ferritic alloys at fusion relevant He/dpa ratios and dpa rates
2007
Structure and properties of ultra-fine grain Cu–Cr–Zr alloy produced by equal-channel angular pressing
2002
Plasma-material interactions in current tokamaks and their implications for next step fusion reactors
2001 Standout
Plastic instability in polycrystalline metals after low temperature irradiation
2004
Dose dependence of the microstructural evolution in neutron-irradiated austenitic stainless steel
1993
Microstructural investigation of the stability under irradiation of oxide dispersion strengthened ferritic steels
2004
Elevated temperature ferritic and martensitic steels and their application to future nuclear reactors
2005
Influence of irradiation parameters on damage accumulation in metals and alloys
1994
Reduced-activation bainitic and martensitic steels for nuclear fusion applications
2004
The influence of helium on the bulk properties of fusion reactor structural materials
1984
Irradiation hardening in unalloyed and ODS molybdenum during low dose neutron irradiation at 300°C and 600°C
2008
Modeling microstructural evolution in fusion reactor environments
1985
Material-structure-performance integrated laser-metal additive manufacturing
2021 StandoutScience
Radiation Effects in Refractory Alloys
2004
Analytical solutions for helium bubble and critical radius parameters using a hard sphere equation of state
1985
Recent Developments in Irradiation-Resistant Steels
2008 Standout
Mechanical properties and microscopic structure of Al-Mg-Li alloys after 14 MeV neutron irradiation
1986
Materials challenges in nuclear energy
2013 Standout
Theory of transitions in dose dependence of radiation effects in structural alloys
1993
Dislocation network in additive manufactured steel breaks strength–ductility trade-off
2017
ELECTRA: European Lead-Cooled Training Reactor
2012
Neutron irradiation effects on plasma facing materials
2000
Theory and experimental background on dimensional changes in irradiated alloys
1994
Irradiation creep mechanisms: An experimental perspective
1988
On the effects of irradiation and helium on the yield stress changes and hardening and non-hardening embrittlement of ∼8Cr tempered martensitic steels: Compilation and analysis of existing data
2006
Fission-fusion correlations for swelling and microstructure in stainless steels: Effect of the helium to displacement per atom ratio
1981
Formation of shear bands and strain-induced martensite during plastic deformation of metastable austenitic stainless steels
2007 Standout
Comparison of swelling and irradiation creep behavior of fcc-austenitic and bcc-ferritic/martensitic alloys at high neutron exposure
2000
A Thermodynamic Evaluation of the Cr-Mn and Fe-Cr-Mn Systems
1993
The evolution of mechanical property change in irradiated austenitic stainless steels
1993
Works of F.A. Garner being referenced
Transmutation of Mo, Re, W, Hf, and V in various irradiation test facilities and STARFIRE
1994
Void swelling in copper and copper alloys irradiated with fission neutrons
1992
Response of Fe-Cr-Mn austenitic alloys to thermal aging and neutron irradiation
1988
Swelling, irradiation creep and growth of pure rhenium irradiated with fast neutrons at 1030–1330°C
2000
Fatigue behavior of copper and selected copper alloys for high heat flux applications
1996
Swelling and void-induced embrittlement of austenitic stainless steel irradiated to 73–82 dpa at 335–365°C
1998
Microstructural and microchemical comparisons of AISI 316 irradiated in HFIR and EBR-II
1983
Comparison of the swelling and the microstructural/microchemical evolution of AISI 316 irradiated in EBR-II and HFIR
1981
Thermal creep and stress-affected precipitation of 20% cold-worked 316 stainless steel
1984
The influence of specimen size on charpy impact testing of unirradiated HT-9
1988
Optimizing materials for nuclear applications
1985
Swelling-induced stresses in ion-bombarded surfaces: Effect of crystalline orientation
1979
The impact of swelling on fusion reactor first wall lifetime
1984
Irradiation creep and swelling of AISI 316 to exposures of 130 dpa at 385–400°C
1988
Swelling and microstructure of high purity nickel irradiated with fast neutrons in EBR-II
1992
Retention of hydrogen in fcc metals irradiated at temperatures leading to high densities of bubbles or voids
2006
The effect of helium on microstructural evolution and mechanical properties of austenitic steels as determined by spectral tailoring experiments
1992
An experimental method to determine the role of helium in neutron-induced microstructural evolution
1979
Development of reduced activation alloys for fusion service
1985
Recent insights on the swelling and creep of irradiated austenitic alloys
1984
The strong influence of displacement rate on void swelling in variants of Fe–16Cr–15Ni–3Mo austenitic stainless steel irradiated in BN-350 and BOR-60
2004
The mechanical properties of 316L/304L stainless steels, Alloy 718 and Mod 9Cr–1Mo after irradiation in a spallation environment
2001
Helium deposition profiles from self-shielded alpha sources
1982
Damage development and hardening in 14 MeV neutron irradiation of copper alloys at 25°C
1981
Factors which determine the swelling behavior of austenitic stainless steels
1984
Phase instabilities in irradiated simple Fe-Cr-Mn low activation alloys
1988
Impact of the injected interstitial on the correlation of charged particle and neutron-induced radiation damage
1983