Citation Impact
Citing Papers
Microstructural and Mechanical Characteristics of AZ61 Magnesium Alloy Processed by High-Pressure Torsion
2007
Development of High-Pressure Sliding Process for Microstructural Refinement of Rectangular Metallic Sheets
2009
Effect of Strain Path in High-Pressure Torsion Process on Hardening in Commercial Purity Titanium
2007
Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation
2017 StandoutNature
Comparison of radiation-induced segregation in ultrafine-grained and conventional 316 austenitic stainless steels
2010
Development of new metallic alloys for biomedical applications
2012 Standout
Hydrostatic Extrusion as a Method of Grain Refinement in Metallic Materials
2006
Back stress strengthening and strain hardening in gradient structure
2016 Standout
Texture, microstructure and mechanical properties of equiaxed ultrafine-grained Zr fabricated by accumulative roll bonding
2008
Strengthening Materials by Engineering Coherent Internal Boundaries at the Nanoscale
2009 StandoutScience
FIB damage of Cu and possible consequences for miniaturized mechanical tests
2007
Microstructure and texture evolution during annealing a cryogenic-SPD processed Al-alloy with a nanoscale lamellar HAGB grain structure
2009
Severe plastic deformation (SPD) processes for metals
2008
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
2015 Standout
The significance of strain reversals during processing by high-pressure torsion
2008
Making strong nanomaterials ductile with gradients
2014 StandoutScience
Producing bulk ultrafine-grained materials by severe plastic deformation
2006
Using high-pressure torsion for metal processing: Fundamentals and applications
2008 Standout
Miniaturized single-crystalline fcc metals deformed in tension: New insights in size-dependent plasticity
2009
Influence of stacking fault energy on the minimum grain size achieved in severe plastic deformation
2007
Formation and structures of bulk nanocrystalline intermetallic alloys studied by transmission electron microscopy
2006
Grain refinement and superplastic flow in an aluminum alloy processed by high-pressure torsion
2005
Plastic strain-induced grain refinement at the nanometer scale in copper
2006 Standout
Strain-Induced Ultrahard and Ultrastable Nanolaminated Structure in Nickel
2013 Science
Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy
2013 Standout
Extreme grain refinement by severe plastic deformation: A wealth of challenging science
2013 Standout
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
2013 Standout
Ultrafine grains and the Hall–Petch relationship in an Al–Mg–Si alloy processed by high-pressure torsion
2011
Effect of friction stir processing parameters on the microstructural and electrical properties of copper
2015
General relationship between strength and hardness
2011 Standout
Evolution of microstructural homogeneity in copper processed by high-pressure torsion
2010
Nanoscale structural refinement via deformation twinning in face-centered cubic metals
2009
Equal channel angular pressing of metal matrix composites: Effect on particle distribution and fracture toughness
2005
Effect of the Zener–Hollomon parameter on the microstructures and mechanical properties of Cu subjected to plastic deformation
2008
Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect
2011 Standout
Ultrafine grain development in copper during multidirectional forging at 195 K
2007
A review of dynamic recrystallization phenomena in metallic materials
2016 Standout
Twenty-five years of ultrafine-grained materials: Achieving exceptional properties through grain refinement
2013
Metallic composites processed via extreme deformation: Toward the limits of strength in bulk materials
2010
The evolution of homogeneity in processing by high-pressure torsion
2006
Partial amorphization of a Cu–Zr–Ti alloy by high pressure torsion
2006
Softening of nanostructured Al–Zn and Al–Mg alloys after severe plastic deformation
2006
Influence of stacking-fault energy on microstructural characteristics of ultrafine-grain copper and copper–zinc alloys
2008
Saturation of Fragmentation During Severe Plastic Deformation
2010
X-Ray Analysis of High Pressure Torsion Induced Nanostructures in Ti and Ni
2006
On the evolution of a deformation induced nanostructure in a Ni3Al alloy
2005
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
2018 StandoutScience
Toward a quantitative understanding of mechanical behavior of nanocrystalline metals
2007 Standout
Formation of nanolaminated structure in an interstitial-free steel
2014
Microstructural evolution and nanostructure formation in copper during dynamic plastic deformation at cryogenic temperatures
2007 Standout
Microstructural evolution of aluminum alloy during friction stir welding under different tool rotation rates and cooling conditions
2018
High-pressure torsion using ring specimens
2007
The effect of high-pressure torsion on the microstructure and hydrogen absorption kinetics of ball-milled Mg70Ni30
2010
Stabilizing nanostructures in metals using grain and twin boundary architectures
2016
Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution
2020 Standout
Microstructures and properties of high-entropy alloys
2013 Standout
Principles of equal-channel angular pressing as a processing tool for grain refinement
2006 Standout
Formation of nano-laminated structure in nickel by means of surface mechanical grinding treatment
2015
Twinning-induced plasticity (TWIP) steels
2017 Standout
Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals
2016 Standout
Formation of a W?25%Cu nanocomposite during high pressure torsion
2005
Size effects of primary/secondary twins on the atomistic deformation mechanisms in hierarchically nanotwinned metals
2013
Bulk nanocrystalline ω-Zr by high-pressure torsion
2007
Tension-induced softening and hardening in gradient nanograined surface layer in copper
2014
Fatigue behaviors of AISI 316L stainless steel with a gradient nanostructured surface layer
2015 Standout
Extreme structural inhomogeneities in high-pressure torsion samples along the axial direction
2011
High pressure torsion to refine grains in pure aluminum up to saturation: mechanisms of structure evolution and their dependence on strain
2012
Microstructure and mechanical properties of nanocrystalline titanium and Ti–Ta–Nb alloy manufactured using various deformation methods
2005
The effect of cryogenic temperature and change in deformation mode on the limiting grain size in a severely deformed dilute aluminium alloy
2008
Revealing the Maximum Strength in Nanotwinned Copper
2009 StandoutScience
Microstructures and microhardness of an aluminum alloy and pure copper after processing by high-pressure torsion
2005
Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys
2020 Standout
Works of F. Wetscher being referenced
Cyclic high-pressure torsion of nickel and Armco iron
2006
Hardening and Softening Behavior by Cyclic High-Pressure Torsion
2009
Strain hardening during high pressure torsion deformation
2005
TEM investigations of the structural evolution in a pearlitic steel deformed by high-pressure torsion
2006
Structural refinement of low alloyed steels during severe plastic deformation
2004
Structure of Cu deformed by high pressure torsion
2004
High Pressure Torsion of Rail Steels
2006
The Limits of Refinement by Severe Plastic Deformation
2006
Mechanical alloying of Cu and Fe induced by severe plastic deformation of a Cu–Fe composite
2005