Citation Impact
Citing Papers
Axial Flux Permanent Magnet Disc Machines: A Review
2019
Design of axial-flux permanent-magnet low-speed machines and performance comparison between radial-flux and axial-flux machines
2005
A review of fuel cell systems for maritime applications
2016 Standout
A review of electrode materials for electrochemical supercapacitors
2011 Standout
Magnetic Materials and Devices for the 21st Century: Stronger, Lighter, and More Energy Efficient
2010 Standout
Comparison of Direct-Drive and Geared Generator Concepts for Wind Turbines
2006 Standout
Research on a 20-Slot/22-Pole Five-Phase Fault-Tolerant PMSM Used for Four-Wheel-Drive Electric Vehicles
2014
Development of a Compact Switched-Reluctance Motor Drive for EV Propulsion With Voltage-Boosting and PFC Charging Capabilities
2009
Design and Optimization of a Nine-Phase Axial-Flux PM Synchronous Generator With Concentrated Winding for Direct-Drive Wind Turbine
2008
A review of energy sources and energy management system in electric vehicles
2012 Standout
High-power wind energy conversion systems: State-of-the-art and emerging technologies
2015 Standout
Review of energy storage technologies for sustainable power networks
2014 Standout
Recent Advances and Industrial Applications of Multilevel Converters
2010 Standout
AC-microgrids versus DC-microgrids with distributed energy resources: A review
2013 Standout
Integrated system for BIM-based collaborative design
2015 Standout
Electrical Machines and Drives for Electric, Hybrid, and Fuel Cell Vehicles
2007 Standout
Investigation on Multi-star Structures for Large Power Direct-drive Wind Generator
2006
Fault-Tolerant In-Wheel Motor Topologies for High-Performance Electric Vehicles
2013
Induction Heating Technology and Its Applications: Past Developments, Current Technology, and Future Challenges
2013 Standout
Recent applications of big data analytics in railway transportation systems: A survey
2018 Standout
Dynamic modeling, design and simulation of a wind/fuel cell/ultra-capacitor-based hybrid power generation system
2006
Overview of Electric Motor Technologies Used for More Electric Aircraft (MEA)
2011 Standout
Recent Advances in the Design, Modeling, and Control of Multiphase Machines—Part I
2015 Standout
A New Battery/UltraCapacitor Hybrid Energy Storage System for Electric, Hybrid, and Plug-In Hybrid Electric Vehicles
2011 Standout
Design and Control of a Multiple Input DC/DC Converter for Battery/Ultra-capacitor Based Electric Vehicle Power System
2009
Renewable energy resources: Current status, future prospects and their enabling technology
2014 Standout
Isolated Buck–Boost DC/DC Converters Suitable for Wide Input-Voltage Range
2011
Design of a maximum power tracking system for wind-energy-conversion applications
2006
An integral battery charger for four-wheel drive electric vehicle
1995
Axial Flux Segmented SRM With a Higher Number of Rotor Segments for Electric Vehicles
2013
Power Electronics and Motor Drives Recent Progress and Perspective
2008
Electric auxiliary propulsion for improved fuel efficiency and reduced emissions
2013
Multiphase Electric Machines for Variable-Speed Applications
2008 Standout
Recent trends in PEM fuel cell-powered hybrid systems: Investigation of application areas, design architectures and energy management approaches
2010
Comparative Study of Fuel-Cell Vehicle Hybridization with Battery or Supercapacitor Storage Device
2009
Force Density Limits in Low-Speed PM Machines Due to Temperature and Reactance
2004
Analysis of Phase-Locked Loop Low-Frequency Stability in Three-Phase Grid-Connected Power Converters Considering Impedance Interactions
2014 Standout
A Hybrid AC/DC Microgrid and Its Coordination Control
2011 Standout
State-of-the-art technologies, measures, and potential for reducing GHG emissions from shipping – A review
2017 Standout
Review of Battery Charger Topologies, Charging Power Levels, and Infrastructure for Plug-In Electric and Hybrid Vehicles
2012 Standout
Automotive Electric Propulsion Systems With Reduced or No Permanent Magnets: An Overview
2014 Standout
An Axial-Flux Permanent-Magnet Synchronous Generator for a Direct-Coupled Wind-Turbine System
2007
Recent Progress on Ferroelectric Polymer-Based Nanocomposites for High Energy Density Capacitors: Synthesis, Dielectric Properties, and Future Aspects
2016 Standout
Review of fossil fuels and future energy technologies
2015 Standout
Simple Expressions for Optimal Current Waveforms for Permanent-Magnet Synchronous Machine Drives
2005
A review of energy storage technologies for wind power applications
2012 Standout
Performance comparisons of radial and axial field, permanent-magnet, brushless machines
2001
A Three-Port Three-Phase DC-DC Converter for Hybrid Low Voltage Fuel Cell and Ultracapacitor
2006
Step-Up DC–DC Converters: A Comprehensive Review of Voltage-Boosting Techniques, Topologies, and Applications
2017 Standout
Design and New Control of DC/DC Converters to Share Energy Between Supercapacitors and Batteries in Hybrid Vehicles
2008
Five-Phase Permanent-Magnet Motor Drives
2005
Fuel cell power conditioning for electric power applications: a summary
2007
Overview of different wind generator systems and their comparisons
2008 Standout
Multiple input DC-DC power converter for fuel-cell powered hybrid vehicles
2003
DC Microgrids–Part I: A Review of Control Strategies and Stabilization Techniques
2015 Standout
Battery, Ultracapacitor, Fuel Cell, and Hybrid Energy Storage Systems for Electric, Hybrid Electric, Fuel Cell, and Plug-In Hybrid Electric Vehicles: State of the Art
2010 Standout
Axial flux machines drives: a new viable solution for electric cars
1997
Control strategy for multiple input DC-DC power converters devoted to hybrid vehicle propulsion systems
2002
System Integration and Power-Flow Management for a Series Hybrid Electric Vehicle Using Supercapacitors and Batteries
2008
Modeling and Analysis of an FC/UC Hybrid Vehicular Power System Using a Novel-Wavelet-Based Load Sharing Algorithm
2008
Quantitative Evaluation of DC Microgrids Availability: Effects of System Architecture and Converter Topology Design Choices
2011
Nonconventional on-board charger for electric vehicle propulsion batteries
2001
Hydrogen Production From Water Electrolysis: Current Status and Future Trends
2011 Standout
Assessment of sustainability indicators for renewable energy technologies
2008 Standout
KOH activation of carbon-based materials for energy storage
2012 Standout
Global Energy Scenario and Impact of Power Electronics in 21st Century
2012
Disturbance/Uncertainty Estimation and Attenuation Techniques in PMSM Drives—A Survey
2016 Standout
Force Density Limits in Low-Speed Permanent-Magnet Machines Due to Saturation
2005
A Survey on Cascaded Multilevel Inverters
2009 Standout
A Novel Hybrid Isolated Generating System Based on PV Fed Inverter-Assisted Wind-Driven Induction Generators
2004
Condition monitoring and fault detection of wind turbines and related algorithms: A review
2007 Standout
Fractional-Slot Concentrated-Windings Synchronous Permanent Magnet Machines: Opportunities and Challenges
2009 Standout
Energy Management Power Converters in Hybrid Electric and Fuel Cell Vehicles
2007
A review of wind energy technologies
2005 Standout
A ZVS Bi-Directional DC–DC Converter for Multiple Energy Storage Elements
2006
DC–AC Cascaded H-Bridge Multilevel Boost Inverter With No Inductors for Electric/Hybrid Electric Vehicle Applications
2009
Overview of current development in electrical energy storage technologies and the application potential in power system operation
2014 Standout
Variable-Speed Wind Turbines with Multi-Pole Synchronous Permanent Magnet Generators. Part I: Modelling in Dynamic Simulation Tools
2003
Advances in Diagnostic Techniques for Induction Machines
2008 Standout
Directly driven, low-speed permanent-magnet generators for wind power applications
2000
Works of F. Caricchi being referenced
Optimum CAD-CAE design of axial-flux PM motors
1992
Performance evaluation of an axial-flux PM generator
1992
Ultracapacitors Employment in Supply Systems for EV Motor Drives: Theoretical Study and Experimental Results
1997
Gearless Wind Energy Conversion System using an Axial-Flux PM Synchronous Machine
1991
Axial-Flux Permanent-Magnet Generator for Induction Heating Gensets
2009
Multiple-input DC-DC power converter for power-flow management in hybrid vehicles
2003
Low-cost compact permanent magnet machine for adjustable-speed pump application
1998
Application of Direct-Drive Wheel Motor for Fuel Cell Electric and Hybrid Electric Vehicle Propulsion System
2006
Testing of a new DC/DC converter topology for integrated wind-photovoltaic generating systems
2002
Experimental study of a bidirectional DC-DC converter for the DC link voltage control and the regenerative braking in PM motor drives devoted to electrical vehicles
2002
COMPACT PERMANENT-MAGNET MACHINES
1997
Compact Wheel Direct Drive for EVs
1996
Design Criteria of a Low-Speed Axial-Flux PM Synchronous Machine
1991
Prototype of an Innovative Electrical Scooter for Application in Zero- Emission Urban Mobility
1994
Performance of coreless-winding axial-flux permanent-magnet generator with power output at 400 Hz, 3000 r/min
1998
Experimental Study on Reducing Cogging Torque and No-Load Power Loss in Axial-Flux Permanent-Magnet Machines With Slotted Winding
2004
Innovative inverter topology for concentrated winding PM motor drives
2003
Experimental study on reducing cogging torque and core power loss in axial-flux permanent-magnet machines with slotted winding
2003
Performance of a 10 kW power electronic interface for combined wind/PV isolated generating systems
2002
Basic principle and design criteria of axial-flux PM machines having counterrotating rotors
1995
Prototype of Variable-Speed, Direct-Drive Generator for Wind Power Exploitation in Extremely Cold Climates
1999
Influence of the radial variation of the magnet pitch in slotless permanent magnet axial flux motors
2002
Modular axial-flux permanent-magnet motor for ship propulsion drives
1999
20 kW water-cooled prototype of a buck-boost bidirectional DC-DC converter topology for electrical vehicle motor drives
2002
Fractional-Slot Concentrated-Winding Axial-Flux Permanent-Magnet Machine With Core-Wound Coils
2011
A critical evaluation and design of bi-directional DC/DC converters for super-capacitors interfacing in fuel cell applications
2004
Axial-flux permanent magnet motor for direct-drive elevator systems without machine room
2002
FEM evaluation of performance of axial flux slotted permanent magnet machines
2002
Study of bi-directional buck-boost converter topologies for application in electrical vehicle motor drives
2002
Design and construction of a wheel-directly-coupled axial-flux PM motor prototype for EVs
2002
Multistage axial-flux PM machine for wheel direct drive
1996
Direct-Drive Wind Generator Pilot Plant for Stand-Alone Units in Extremely Cold Climates
2001
Compact Permanent-Magnet Generator for Hybrid Vehicle Applications
2005
Low-cost compact PM machine for adjustable-speed pump application
2002