Citation Impact
Citing Papers
Efficiency of bulk-heterojunction organic solar cells
2013
Recent advances in water/alcohol-soluble π-conjugated materials: new materials and growing applications in solar cells
2013
Large-area display textiles integrated with functional systems
2021 StandoutNature
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
2013 StandoutNature
Liquid‐Crystalline Rigid‐Core Semiconductor Oligothiophenes: Influence of Molecular Structure on Phase Behaviour and Thin‐Film Properties
2007
Small Molecule Organic Semiconductors on the Move: Promises for Future Solar Energy Technology
2012 Standout
Low band gap EDOT–benzobis(thiadiazole) hybrid polymer characterized on near-IR transmissive single walled carbon nanotube electrodes
2007
Correlating triplet yield, singlet oxygen generation and photochemical stability in polymer/fullerene blend films
2013
Bithiopheneimide–Dithienosilole/Dithienogermole Copolymers for Efficient Solar Cells: Information from Structure–Property–Device Performance Correlations and Comparison to Thieno[3,4-c]pyrrole-4,6-dione Analogues
2012
Strain and Hückel Aromaticity: Driving Forces for a Promising New Generation of Electron Acceptors in Organic Electronics
2009
Synthesis and Photovoltaic Effect in Dithieno[2,3‐d:2′,3′‐d′]Benzo[1,2‐b:4,5‐b′]dithiophene‐Based Conjugated Polymers
2012
High‐Performance and Highly Durable Inverted Organic Photovoltaics Embedding Solution‐Processable Vanadium Oxides as an Interfacial Hole‐Transporting Layer
2011
Room‐Temperature Formation of Hollow Cu2O Nanoparticles
2010
Small molecule semiconductors for high-efficiency organic photovoltaics
2012 Standout
Development of Agriculture Left-Overs: Fine Organic Chemicals from Wheat Hemicellulose-Derived Pentoses
2010
Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)
2019 StandoutNature
Aqueous dispersions of colloidal poly(3-hexylthiophene) gel particles with high internal porosity
2011
Electrochemical allylation of carbonyl compounds in aqueous electrolyte catalyzed by zinc
2010
Spray Processable Green to Highly Transmissive Electrochromics via Chemically Polymerizable Donor–Acceptor Heterocyclic Pentamers
2008
Multi-colored dye sensitization of polymer/fullerene bulk heterojunction solar cells
2010
BODIPY–Thiophene Copolymers as p‐Channel Semiconductors for Organic Thin‐Film Transistors
2013 StandoutNobel
Gated Electron Sharing Within Dynamic Naphthalene Diimide‐Based Oligorotaxanes
2014 StandoutNobel
Polymer–Fullerene Bulk‐Heterojunction Solar Cells
2010 Standout
Crystalline low band-gap alternating indolocarbazole and benzothiadiazole-cored oligothiophene copolymer for organic solar cell applications
2008
Unraveling Inter‐ and Intrachain Electronics in Polythiophene Assemblies Mediated by Coordination Nanospaces
2015 StandoutNobel
Advanced grazing-incidence techniques for modern soft-matter materials analysis
2014
Polytellurophenes
2011
Integrated Molecular, Interfacial, and Device Engineering towards High‐Performance Non‐Fullerene Based Organic Solar Cells
2014
Prospects of Colloidal Nanocrystals for Electronic and Optoelectronic Applications
2009 Standout
Polymer bulk heterojunction solar cells employing Förster resonance energy transfer
2013
Highly Efficient and Reproducible Nonfullerene Solar Cells from Hydrocarbon Solvents
2017
The effect of polymer solubilizing side-chains on solar cell stability
2015
Iron Catalysis in Organic Synthesis
2015 Standout
3d Transition Metals for C–H Activation
2018 Standout
Organic and solution-processed tandem solar cells with 17.3% efficiency
2018 StandoutScience
Low Band Gap Donor‐Acceptor Conjugated Polymer Nanoparticles and their NIR‐mediated Thermal Ablation of Cancer Cells
2012
Stille Polycondensation for Synthesis of Functional Materials
2011
In Situ Characterization of Lifetime and Morphology in Operating Bulk Heterojunction Organic Photovoltaic Devices by Impedance Spectroscopy
2011
Ternary Bulk Heterojunction Solar Cells: Addition of Soluble NIR Dyes for Photocurrent Generation beyond 800 nm
2014
Efficient Ternary Blend Bulk Heterojunction Solar Cells with Tunable Open-Circuit Voltage
2011
Air stable polymer photovoltaics based on a process free from vacuum steps and fullerenes
2008
Alternating copolymers of electron‐rich arylamine and electron‐deficient 2,1,3‐benzothiadiazole: Synthesis, characterization and photovoltaic properties
2007
Materials and Applications for Large Area Electronics: Solution-Based Approaches
2010 Standout
Highly efficient exciton harvesting and charge transport in ternary blend solar cells based on wide- and low-bandgap polymers
2015
Photovoltaics from soluble small molecules
2007
Charge Photogeneration in Organic Solar Cells
2010 Standout
Graphene Cathode-Based ZnO Nanowire Hybrid Solar Cells
2012 StandoutNobel
Side‐Chain Engineering for Enhancing the Properties of Small Molecule Solar Cells: A Trade‐off Beyond Efficiency
2016
Preparation of Active Layers in Polymer Solar Cells by Aerosol Jet Printing
2011
Highly Disordered Polymer Field Effect Transistors: N-Alkyl Dithieno[3,2-b:2′,3′-d]pyrrole-Based Copolymers with Surprisingly High Charge Carrier Mobilities
2008
Controlling the Morphology and Performance of Bulk Heterojunctions in Solar Cells. Lessons Learned from the Benchmark Poly(3-hexylthiophene):[6,6]-Phenyl-C61-butyric Acid Methyl Ester System
2013
Distinct Annealing Temperature in Polymer:Fullerene:Polymer Ternary Blend Solar Cells
2009
Light-Harvesting Mechanism in Polymer/Fullerene/Dye Ternary Blends Studied by Transient Absorption Spectroscopy
2011
Stability of organic solar cells: challenges and strategies
2016
Toward a Rational Design of Poly(2,7-Carbazole) Derivatives for Solar Cells
2007
Solution Processing of a Small Molecule, Subnaphthalocyanine, for Efficient Organic Photovoltaic Cells
2009
A Low Reabsorbing Luminescent Solar Concentrator Employing π‐Conjugated Polymers
2015 StandoutNobel
A complete process for production of flexible large area polymer solar cells entirely using screen printing—First public demonstration
2009
New Insights into Perfluorinated Sulfonic-Acid Ionomers
2017 Standout
Selective Dye Loading at the Heterojunction in Polymer/Fullerene Solar Cells
2011
Conversion of Biomass into Chemicals over Metal Catalysts
2013 Standout
Scalable Synthesis of InAs Quantum Dots Mediated through Indium Redox Chemistry
2020 StandoutNobel
Synthesis and organic photovoltaic (OPV) properties of triphenylamine derivatives based on a hexafluorocyclopentene “core”
2011
Alloy Acceptor: Superior Alternative to PCBM toward Efficient and Stable Organic Solar Cells
2016
All solution processed tandem polymer solar cells based on thermocleavable materials☆
2008
Are we there yet? Design of better conjugated polymers for polymer solar cells
2011
Stability of Organic Solar Cells: The Influence of Nanostructured Carbon Materials
2016
Thiophene/Phenylene/Thiophene-Based Low-Bandgap Conjugated Polymers for Efficient Near-Infrared Photovoltaic Applications
2009
A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies
2009
Pronounced Effects of a Triazine Core on Photovoltaic Performance–Efficient Organic Solar Cells Enabled by a PDI Trimer‐Based Small Molecular Acceptor
2016
Conjugated‐Polymer Blends for Optoelectronics
2009
Synthesis of Acenaphthyl and Phenanthrene Based Fused-Aromatic Thienopyrazine Co-Polymers for Photovoltaic and Thin Film Transistor Applications
2009
Roll-to-roll fabrication of polymer solar cells
2012 Standout
Copper Nanocrystals Encapsulated in Zr-based Metal–Organic Frameworks for Highly Selective CO2 Hydrogenation to Methanol
2016 StandoutNobel
Supramolecular Chirality in Self-Assembled Systems
2015 Standout
Organic electronics from perylene to organic photovoltaics: painting a brief history with a broad brush
2010
Patternable polymer bulk heterojunction photovoltaic cells on plastic by rotogravure printing
2009
Slot‐Die Coating of a High Performance Copolymer in a Readily Scalable Roll Process for Polymer Solar Cells
2013
Transition metals in organic synthesis: Highlights for the year 2005
2007
Distannylated Isothianaphthene: A Versatile Building Block for Low Bandgap Conjugated Polymers
2008
Aggregation-Induced Emission: Together We Shine, United We Soar!
2015 Standout
A Low Band Gap, Solution Processable Oligothiophene with a Diketopyrrolopyrrole Core for Use in Organic Solar Cells
2008
Solution-Processed Infrared Optoelectronics: Photovoltaics, Sensors, and Sources
2008
Next Generation of Fluorine-Containing Pharmaceuticals, Compounds Currently in Phase II–III Clinical Trials of Major Pharmaceutical Companies: New Structural Trends and Therapeutic Areas
2016 Standout
Evaluation of Electron Donor Materials for Solution‐Processed Organic Solar Cells via a Novel Figure of Merit
2017
Open circuit voltage of organic solar cells: an in-depth review
2015
High performance all-small-molecule solar cells: engineering the nanomorphology via processing additives
2016
Improving the long-term stability of PBDTTPD polymer solar cells through material purification aimed at removing organic impurities
2013
Efficient hybrid bulk heterojunction solar cells based on phenylenevinylene copolymer, perylene bisimide and TiO2
2009
A benzothiadiazole-based oligothiophene for vacuum-deposited organic photovoltaic cells
2010
Low band gap poly-thienopyrazines for solar cells—Introducing the 11-thia-9,13-diaza-cyclopenta[b]triphenylenes
2007
Synthesis, Characterization, and Photovoltaic Properties of Novel Semiconducting Polymers with Thiophene−Phenylene−Thiophene (TPT) as Coplanar Units
2008
Efficient photovoltaic device fashioned of highly aligned multilayers of electrospun TiO2 nanowire array with conjugated polymer
2008
Functional Nanomaterials for Phototherapies of Cancer
2014 Standout
Dibenzo[f,h]thieno[3,4-b] quinoxaline-Based Small Molecules for Efficient Bulk-Heterojunction Solar Cells
2009
Molecular Design and Ordering Effects in π-Functional Materials for Transistor and Solar Cell Applications
2011
Synthesis and Photovoltaic Properties of a Novel Low Band Gap Polymer Based on N-Substituted Dithieno[3,2-b:2′,3′-d]pyrrole
2008
Rational Design of High Performance Conjugated Polymers for Organic Solar Cells
2012
Recent development of the inverted configuration organic solar cells
2011
Stability/degradation of polymer solar cells
2008 Standout
Solution-Processed Organic Solar Cells
2008
Structure and property development of poly(3-hexylthiophene) organogels probed with combined rheology, conductivity and small angle neutron scattering
2012
A stable, low band gap electroactive polymer: Poly(4,7-dithien-2-yl-2,1,3-benzothiadiazole)
2008
Synthesis of benzoselenadiazole-based small molecule and phenylenevinylene copolymer and their application for efficient bulk heterojunction solar cells
2009
Solution processable bulk-heterojunction solar cells using a small molecule acceptor
2008
Organic non-fullerene acceptors for organic photovoltaics
2011
The Influence of Solvent Additive on Polymer Solar Cells Employing Fullerene and Non‐Fullerene Acceptors
2017
Diketopyrrolopyrrole-Based Semiconducting Polymer for Photovoltaic Device with Photocurrent Response Wavelengths up to 1.1 μm
2009
Polymer solar cell modules prepared using roll-to-roll methods: Knife-over-edge coating, slot-die coating and screen printing
2009
Polymers for 3D Printing and Customized Additive Manufacturing
2017 Standout
Estimating the manufacturing cost of purely organic solar cells
2009
Functional π-Gelators and Their Applications
2014 Standout
Transition-Metal-Catalyzed C−S, C−Se, and C−Te Bond Formation via Cross-Coupling and Atom-Economic Addition Reactions
2011 Standout
Small Band Gap Oligothieno[3,4-b]pyrazines
2008
Polymer solar cells with NiO hole-collecting interlayers processed by atomic layer deposition
2013
Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals
2015 StandoutScience
Efficient bulk heterojunction devices based on phenylenevinylene small molecule and perylene–pyrene bisimide
2009
Semiconducting π-Conjugated Systems in Field-Effect Transistors: A Material Odyssey of Organic Electronics
2011 Standout
Synthesis of Isoindigo-Based Oligothiophenes for Molecular Bulk Heterojunction Solar Cells
2010
BODIPY-Based Donor–Acceptor π-Conjugated Alternating Copolymers
2011
Side Chain Engineering in Solution-Processable Conjugated Polymers
2013
High Performance Weak Donor–Acceptor Polymers in Thin Film Transistors: Effect of the Acceptor on Electronic Properties, Ambipolar Conductivity, Mobility, and Thermal Stability
2011 Nobel
Solar Cells, Photodetectors, and Optical Sources from Infrared Colloidal Quantum Dots
2008
Charge Transport, Photovoltaic, and Thermoelectric Properties of Poly(2,7‐Carbazole) and Poly(Indolo[3,2‐b]Carbazole) Derivatives
2008
Organoindium Reagents: The Preparation and Application in Organic Synthesis
2012
Synthesis of Fluorinated Polythienothiophene-co-benzodithiophenes and Effect of Fluorination on the Photovoltaic Properties
2011
Nonfullerene Acceptor Molecules for Bulk Heterojunction Organic Solar Cells
2018 Standout
Near-infrared response photovoltaic device based on novel narrow band gap small molecule and PCBM fabricated by solution processing
2007
Synthetic Organic Electrochemical Methods Since 2000: On the Verge of a Renaissance
2017 Standout
An explanation for the high stability of polycarboxythiophenes in photovoltaic devices—A solid-state NMR dipolar recoupling study
2008
Mechanical Stabilization of Helical Chirality in a Macrocyclic Oligothiophene
2019 StandoutNobel
Review: Fullerene based acceptors for efficient bulk heterojunction organic solar cell applications
2016
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
2013 StandoutScience
Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells
2012
Visible−Near Infrared Absorbing Dithienylcyclopentadienone−Thiophene Copolymers for Organic Thin-Film Transistors
2008 Nobel
Beyond PCBM: methoxylated 1,4-bisbenzyl[60]fullerene adducts for efficient organic solar cells
2015
Functional Oligothiophenes: Molecular Design for Multidimensional Nanoarchitectures and Their Applications
2009 Standout
A Novel Alternating Phenylenevinylene Copolymer with Perylene Bisimide Units: Synthesis, Photophysical, Electrochemical, and Photovoltaic Properties
2009
Small Bandgap Polymers for Organic Solar Cells(Polymer Material Development in the Last 5 Years)
2008
Graphene, related two-dimensional crystals, and hybrid systems for energy conversion and storage
2015 StandoutScience
Total synthesis of gabosines via an iron-catalyzed intramolecular tandem aldol process
2011
Recent trends in polymer tandem solar cells research
2013
Tailoring side chains of low band gap polymers for high efficiency polymer solar cells
2010
Synthesis, characterization and comparative study of thiophene–benzothiadiazole based donor–acceptor–donor (D–A–D) materials
2009
Low-Temperature Solution-Processed Solar Cells Based on PbS Colloidal Quantum Dot/CdS Heterojunctions
2013 StandoutNobel
Strain and Hückel Aromaticity: Driving Forces for a Promising New Generation of Electron Acceptors in Organic Electronics
2009
Extracting Information about the Electronic Quality of Organic Solar-Cell Absorbers from Fill Factor and Thickness
2016
Enhanced intrinsic stability of the bulk heterojunction active layer blend of polymer solar cells by varying the polymer side chain pattern
2013
High band gap poly(9,9-dihexylfluorene-alt-bithiophene) blended with [6,6]-phenyl C61 butyric acid methyl ester for use in efficient photovoltaic devices
2009
25th Anniversary Article: Rise to Power – OPV‐Based Solar Parks
2013 Standout
Broad Family of Carbon Nanoallotropes: Classification, Chemistry, and Applications of Fullerenes, Carbon Dots, Nanotubes, Graphene, Nanodiamonds, and Combined Superstructures
2015 Standout
Low-Band-Gap Platinum Acetylide Polymers as Active Materials for Organic Solar Cells
2009
Color Control in π-Conjugated Organic Polymers for Use in Electrochromic Devices
2010 Standout
Synthesis and photovoltaic properties of a star-shaped molecule with triphenylamine as core and benzo[1,2,5]thiadiazol vinylene as arms
2008
Effects of Solvent Mixtures on the Nanoscale Phase Separation in Polymer Solar Cells
2008
Electron-hole diffusion lengths > 175 μm in solution-grown CH 3 NH 3 PbI 3 single crystals
2015 StandoutScience
Stretchable and waterproof elastomer-coated organic photovoltaics for washable electronic textile applications
2017
Soluble Narrow Band Gap and Blue Propylenedioxythiophene-Cyanovinylene Polymers as Multifunctional Materials for Photovoltaic and Electrochromic Applications
2006
Panchromatic Conjugated Polymers Containing Alternating Donor/Acceptor Units for Photovoltaic Applications
2007
Water-Induced Degradation of Polymer Solar Cells Studied by H218O Labeling
2008
Versatile third components for efficient and stable organic solar cells
2015
Solar cells with one-day energy payback for the factories of the future
2011
High-Mobility Organic Thin Film Transistors Based on Benzothiadiazole-Sandwiched Dihexylquaterthiophenes
2008
Examining the Effect of the Dipole Moment on Charge Separation in Donor–Acceptor Polymers for Organic Photovoltaic Applications
2011
Photochromism of Diarylethene Molecules and Crystals: Memories, Switches, and Actuators
2014 Standout
Thermo-cleavable solvents for printing conjugated polymers: Application in polymer solar cells
2009
Low band gap conjugated small molecules containing benzobisthiadiazole and thienothiadiazole central units: synthesis and application for bulk heterojunction solar cells
2011
Two-photon pumped emission of polymeric thin film doped with dicyanopyranone derivative
2015
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
2012 StandoutScience
Improved Efficiency of Bulk Heterojunction Polymer Solar Cells by Doping Low-Bandgap Small Molecules
2014
Bulk heterojunction organic photovoltaic devices based on low band gap small molecule BTD-TNP and perylene–anthracene diimide
2009
Eco‐Friendly Solvent‐Processed Fullerene‐Free Polymer Solar Cells with over 9.7% Efficiency and Long‐Term Performance Stability
2017
Ternary organic solar cells with enhanced open circuit voltage
2017
A Small Molecule Non‐fullerene Electron Acceptor for Organic Solar Cells
2010
Polymer based organic solar cells using ink-jet printed active layers
2008
Recent Advances in Bulk Heterojunction Polymer Solar Cells
2015 Standout
Comparison of Two D−A Type Polymers with Each Being Fluorinated on D and A Unit for High Performance Solar Cells
2014
Synthesis, Characterization, and Photovoltaic Properties of a Low Band Gap Polymer Based on Silole-Containing Polythiophenes and 2,1,3-Benzothiadiazole
2008
Synthetic Principles Directing Charge Transport in Low-Band-Gap Dithienosilole–Benzothiadiazole Copolymers
2012
A-D-A-D-A-Type Oligothiophenes for Vacuum-Deposited Organic Solar Cells
2010
Reducing burn-in voltage loss in polymer solar cells by increasing the polymer crystallinity
2014
High Open-Circuit Voltage Solar Cells Based on Organic–Inorganic Lead Bromide Perovskite
2013
Pad printing as a film forming technique for polymer solar cells
2008
A planar electron acceptor for efficient polymer solar cells
2015
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
2008 Standout
Fluorescent Conjugated Polymers That Incorporate Substituted 2,1,3-Benzooxadiazole and 2,1,3-Benzothiadiazole Units
2008
“All That Glisters Is Not Gold”: An Analysis of the Synthetic Complexity of Efficient Polymer Donors for Polymer Solar Cells
2015
Photovoltaic Performance of an Ultrasmall Band Gap Polymer
2009
Conjugated polymers for high-efficiency organic photovoltaics
2010
Molecular Weight Effect on the Efficiency of Polymer Solar Cells
2013
Promising long-term stability of encapsulated ITO-free bulk-heterojunction organic solar cells under different aging conditions
2014
Water photolysis at 12.3% efficiency via perovskite photovoltaics and Earth-abundant catalysts
2014 StandoutScience
Enhanced Organic Solar Cell Stability by Polymer (PCPDTBT) Side Chain Functionalization
2015
Efficient Non-doped Near Infrared Organic Light-Emitting Devices Based on Fluorophores with Aggregation-Induced Emission Enhancement
2012
Direct (Hetero)arylation Polymerization: Simplicity for Conjugated Polymer Synthesis
2016
Synthesis of Conjugated Polymers for Organic Solar Cell Applications
2009 Standout
Improvement of the Light-Harvesting Efficiency in Polymer/Fullerene Bulk Heterojunction Solar Cells by Interfacial Dye Modification
2009
Works of Eva Bundgaard being referenced
Matrix Organization and Merit Factor Evaluation as a Method to Address the Challenge of Finding a Polymer Material for Roll Coated Polymer Solar Cells
2015
The state of organic solar cells—A meta analysis
2013
A laboratory scale approach to polymer solar cells using one coating/printing machine, flexible substrates, no ITO, no vacuum and no spincoating
2012
Roll-coating fabrication of flexible organic solar cells: comparison of fullerene and fullerene-free systems
2015
Simultaneous multilayer formation of the polymer solar cell stack using roll-to-roll double slot-die coating from water
2011
A comparative study of fluorine substituents for enhanced stability of flexible and ITO‐free high‐performance polymer solar cells
2014
Upscaling from single cells to modules – fabrication of vacuum- and ITO-free polymer solar cells on flexible substrates with long lifetime
2013
Low band gap polymers for organic photovoltaics
2007
Aqueous Processing of Low-Band-Gap Polymer Solar Cells Using Roll-to-Roll Methods
2011
Roll-coating fabrication of ITO-free flexible solar cells based on a non-fullerene small molecule acceptor
2015
Large-area photovoltaics based on low band gap copolymers of thiophene and benzothiadiazole or benzo-bis(thiadiazole)
2007
Roll-to-roll processed polymer tandem solar cells partially processed from water
2011
Roll-coating fabrication of flexible large area small molecule solar cells with power conversion efficiency exceeding 1%
2014
A comparison of the photovoltaic response of head-to-head and head-to-tail coupled poly{(benzo-2,1,3-thiadiazol-4,7-diyl)-(dihexyl[2,2’]dithiophene-5,5’-diyl}
2005
Ambient roll-to-roll fabrication of flexible solar cells based on small molecules
2013
Influence of functionality on direct arylation of model systems as a route toward fluorinated copolymers via direct arylation polymerization (DArP)
2015
Advanced Functional Polymers for Increasing the Stability of Organic Photovoltaics
2013
Low-Band-Gap Conjugated Polymers Based on Thiophene, Benzothiadiazole, and Benzobis(thiadiazole)
2006
Low Band Gap Polymers for Roll-to-Roll Coated Polymer Solar Cells
2010
Removal of Solubilizing Side Chains at Low Temperature: A New Route to Native Poly(thiophene)
2012
Effect of Solvent-Assisted Nanoscaled Organo-Gels on Morphology and Performance of Organic Solar Cells
2012
Bulk heterojunctions based on a low band gap copolymer of thiophene and benzothiadiazole
2007
Comparison of additive amount used in spin-coated and roll-coated organic solar cells
2014
A Short Synthesis of (+)-Cyclophellitol
2005
Analysis of diverse direct arylation polymerization (DArP) conditions toward the efficient synthesis of polymers converging with stille polymers in organic solar cells
2016
Roll‐Coated Fabrication of Fullerene‐Free Organic Solar Cells with Improved Stability
2015
A solution process for inverted tandem solar cells
2010
Photochemical stability of π-conjugated polymers for polymer solar cells: a rule of thumb
2011