Citation Impact
Citing Papers
Efficacy of different adhesive techniques on bonding to root canal walls: an SEM investigation
2001
Sexual Activity and the Postcoronary Patient
1970
Comparison between a silorane-based composite and methacrylate-based composites: Shrinkage characteristics, thermal properties, gel point and vitrification point
2012
NIR‐spectroscopic investigation of water sorption characteristics of dental resins and composites
1991
Some effects of water on dentin bonding
1995
Carbohydrates, Branched-Chain Amino Acids, and Endurances: The Central Fatigue Hypothesis
1995
The effect of filler and silane content on conversion of resin-based composite
2003
Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins
2002 Standout
Influence of ceramic thickness on the polymerization of light-cured resin cement
1990
Effects of resin hydrophilicity on water sorption and changes in modulus of elasticity
2005 Standout
Water sorption and solubility of dental composites and identification of monomers released in an aqueous environment
2001
Influence of light-curing procedures and photo-initiator/co-initiator composition on the degree of conversion of light-curing resins
2005
Modulated photoactivation methods: Influence on contraction stress, degree of conversion and push-out bond strength of composite restoratives
2006
Solvent-induced dimensional changes in EDTA-demineralized dentin matrix
2001
Contraction stress and physical properties development of a resin-based composite irradiated using modulated curing methods at two C-factor levels
2007
Comparison Between Two Clinical Procedures for Bonding Fiber Posts into a Root Canal: A Microscopic Investigation
2002
Enzymatic degradation of BISGMA/TEGDMA‐polymers causing decreased microhardness and greater wear in vitro
1990
Effects of Lining Materials on the Composite Resins Shrinkage Stresses
1994
Effect of resin hydrophilicity and water storage on resin strength
2004
Reduction of polymerization contraction stress for dental composites by two-step light-activation
2002
Polymerization contraction stress in light-cured packable composite resins
2001
Contraction Stress and Marginal Adaptation of Composite Restorations in Dentinal Cavity
1994
Reduced light energy density decreases post-gel contraction while maintaining degree of conversion in composites
1998
Polymerization contraction stress in light-cured compomer restorative materials
2003
Clinical relevance of the formulation and testing of dentine bonding systems
1994
Three-year clinical comparison of survival of endodontically treated teeth restored with either full cast coverage or with direct composite restoration
2002
Heart-Rate Recovery Immediately after Exercise as a Predictor of Mortality
1999 Standout
High irradiance curing and anomalies of exposure reciprocity law in resin-based materials
2011
The effects of thermal and occlusal stresses on the microleakage of the Scotchbond 2 dentinal bonding system
1991
Five-year clinical performance of posterior resin composite restorations placed by dental students
2004
Effect of photoinitiator level on properties of a light-cured and post-cure heated model resin system
1997
An overview of chemical additives present in plastics: Migration, release, fate and environmental impact during their use, disposal and recycling
2017 Standout
General Dentists' Patterns of Restoring
1995
Comparison of polymerization contraction stresses between self- and light-curing composites
1999
Network structures of Bis-GMA/TEGDMA resins differ in DC, shrinkage-strain, hardness and optical properties as a function of reducing agent
2011
Leaching characteristics of polybrominated diphenyl ethers (PBDEs) from flame-retardant plastics
2006
Effects of various light curing methods on the leachability of uncured substances and hardness of a composite resin
2004
Properties of heat-treated composites after aging in water
1995
Resin cure determination by polymerization shrinkage
1995
Effect of Phenyl-P/HEMA acetone primer on wet bonding to EDTA-conditioned dentin
2001
Polymerization shrinkage of composite resins: Comparison with tooth deformation
1994
Volume contraction in photocured dental resins: The shrinkage-conversion relationship revisited
2005
Effect of primers on bonding agent polymerization
1998
A material model for internal stress of dental composites caused by the curing process
2008
In vitro comparison of mechanical properties and degree of cure of bulk fill composites
2012
Glutaraldehyde-containing dentin bonding agents are mutagens in mammalian cellsin vitro
1997
Marginal adaptation of class V restorations using different restorative techniques
1991
Adverse surface interactions between one-bottle light-cured adhesives and chemical-cured composites
2001
Exercise Standards for Testing and Training
2013 Standout
Evaluation of Regional Bond Strength of Resin Cement to Endodontic Surfaces
2001
Chemical aspects of self-etching enamel–dentin adhesives: A systematic review
2005 Standout
Characterization of Enamel and Dentin Surfaces after Removal of Temporary Cement
1994
Effects of polyvalent alcohol solutions as dentine primers
1997
Effect of photoinitiator on degree of conversion of unfilled light-cured resin
1994
Uv–vis spectrophotometric direct transmittance analysis of composite resins
2006
Polymerisation characteristics of resin composites polymerised with different curing units
2004
Physicomechanical evaluation of low‐shrinkage dental nanocomposites based on silsesquioxane cores
2007
State-of-the-art: Dental photocuring—A review
2010
Effects of particle size of silica filler on polymerization conversion in a light-curing resin composite
2011
Resin-ceramic bonding: A review of the literature
2003 Standout
A comparative study of three dental adhesives
1995
Comparison of Manufacturer‐Recommended Exposure Durations with Those Determined Using Biaxial Flexure Strength and Scraped Composite Thickness Among a Variety of Light‐Curing Units
2009
Residual monomers (TEGDMA and Bis‐GMA) of a set visible‐light‐cured dental composite resin when immersed in water
1991
Microleakage in three designs of glass ionomer under composite resin restorations
1991
Diametral tensile strength and bonding to dentin of type I glass ionomer cements
1994
Compressive and diametral tensile strengths of current adhesive luting agents
1993
Effect of crosslinking agent content, monomer functionality, and repeat unit chemistry on properties of unfilled resins
1993
Is the soft-start polymerisation concept still relevant for modern curing units?
2009
Ceramics in dentistry: Historical roots and current perspectives
1996 Standout
Towards the elucidation of shrinkage stress development and relaxation in dental composites
2004
A 6-year clinical evaluation of class I poly-acid modified resin composite/resin composite laminate restorations cured with a two-step curing technique
2003
Effects of phosphoric acid and glutaraldehyde‐HEMA on dentin collagen
2001
Effects of resin composite composition and irradiation distance on the performance of curing lights
2004
Evaluation of methylene lactone monomers in dental resins
1992
Bonding to glass infiltrated alumina ceramic: Adhesive methods and their durability
1995
Photopolymerization of dental composite matrices
1994
Effect of co-initiator ratio on the polymer properties of experimental resin composites formulated with camphorquinone and phenyl-propanedione
2008
Hygroscopic and hydrolytic effects in dental polymer networks
2005 Standout
Photopolymerizable hydrogels for tissue engineering applications
2002 Standout
Comparison of the marginal integrity of in vivo and in vitro Class II composite restorations
1993
Sensitivity of catalyst/base ratio on curing of resin luting agents: Polymerization exotherm analysis
1994
Micro-Raman spectroscopic analysis of the degree of conversion of composite resins containing different initiators cured by polywave or monowave LED units
2011
Microleakage of new crown and fixed partial denture luting agents
1992
Evaluation of dental restorative composites containing polyhedral oligomeric silsesquioxane methacrylate
2004
Retention of posts cemented with various dentinal bonding cements
1994
Influence of drying and HEMA treatment on dentin wettability
2002
Intrinsic ‘soft-start’ polymerisation shrinkage-kinetics in an acrylate-based resin-composite
1999
Systematic review of the chemical composition of contemporary dental adhesives
2007 Standout
Detection of leached moieties from dental composites in fluid simulating food and saliva
1995
Combination of EDTA conditioner and Phenyl-P/HEMA self-etching primer for bonding to dentin
1999
Reduction of Polymerization Shrinkage Stress and Marginal Microleakage Using Soft‐Start Polymerization
2003
Photoinitiator type and applicability of exposure reciprocity law in filled and unfilled photoactive resins
2010
Retention of Propanal and Diacetyl in Experimental Resins
1997
Long-term survival of primary root canal treatment carried out in a dental teaching hospital
2003
Inefficient Muscular Stabilization of the Lumbar Spine Associated With Low Back Pain
1996 Standout
Effect of training on central factors in fatigue following two‐ and one‐leg static exercise in man
1991
Physical properties and gap formation of light-cured composites with and without ‘softstart-polymerization’
1997
Rheology of urethane dimethacrylate and diluent formulations
1999
Benzoyl germanium derivatives as novel visible light photoinitiators for dental materials
2007
Comparison between two Procion dyes and Alizarin Red to assess marginal leakage in resin restorations. A laboratory study
1991
Curing-light attenuation in filled-resin restorative materials
2005
The influence of resin chemistry on a dental composite's biodegradation
2004
Influence of light intensity on two restorative systems
1995
Analysis of camphorquinone in composite resins as a function of shade
2007
Effect of core stiffness on the in vitro fracture of crowned, endodontically treated teeth
2002
Marginal integrity related to bond strength and strain capacity of composite resin restorative systems
1990
Arm-cranking muscle power and arm isometric muscle strength are independent predictors of all-cause mortality in men
2004
An in vitro study into the effect of the ferrule preparation on the fracture resistance of crowned teeth incorporating prefabricated post and composite core restorations
2001
Dual-cure resin ceme: in vitro wear and effect of quantity of remaining double bonds, filler volume, and light curing
1995
Filler features and their effects on wear and degree of conversion of particulate dental resin composites
2005
Synthesis and photopolymerization of N,N′-dimethyl,-N,N′-di(methacryloxy ethyl)-1,6-hexanediamine as a polymerizable amine coinitiator for dental restorations
2002
Relation between water content in acetone/alcohol-based primer and interfacial ultrastructure
1998
Effects of polar solvents on the fracture resistance of dentin: role of water hydration
2004
New insight into the “depth of cure” of dimethacrylate-based dental composites
2012
Interfacial gaps of resin cemented ceramic inlays
1995
Color stability of resin matrix restorative materials as a function of the method of light activation
2004
Exercise and aging
2004
Antibacterial activity of dental composites containing quaternary ammonium polyethylenimine nanoparticles against Streptococcus mutans
2006 Standout
Effect of storage media on microleakage of five dentin bonding agents
1993
Pulpal-temperature Rise and Polymerization Efficiency of LED Curing Lights
2010
Identification of organic eluates from four polymer‐based dental filling materials
2003
Post Placement and Restoration of Endodontically Treated Teeth: A Literature Review
2004 Standout
Calibration of FTIR conversion analysis of contemporary dental resin composites
1990
Light intensity effects on resin-composite degree of conversion and shrinkage strain
2000 Standout
Development of a new photoinitiation system for dental light-cure composite resins
1999
Compatibility between self-etching adhesive and self-curing resin by addition of anion exchange resin
2005
Comparison of marginal fit and microleakage of ceramic and composite inlays: an in vitro study
1994
Correlation of in vivo and in vitro performance of adhesive restorative materials: A report of the ASC MD156 task group on test methods for the adhesion of restorative materials
1991
Effect of dentin primers containing N-methylolacrylamide or N-methylolmethacrylamide on dentin pretreatment
1999
Determination of polymerization shrinkage kinetics in visible-light-cured materials: methods development
1991
Microleakage of Dentin Adhesive Systems
1991
Insufficient cure under the condition of high irradiance and short irradiation time
2008
Effect of water-soluble photoinitiator on the adhesion between composite and tooth substrate
1992
Progress in dimethacrylate-based dental composite technology and curing efficiency
2012 Standout
Determination of the optimal photoinitiator concentration in dental composites based on essential material properties
2009
Interaction of LED light with coinitiator-containing composite resins: Effect of dual peaks
2012
The effects of acute exercise on cognitive performance: A meta-analysis
2012 Standout
Age-Associated Loss of Power and Strength in the Upper Extremities in Women and Men
1997
Resin restorations: leakage, bacteria, pulp
1993
Marginal seal of injection-molded ceramic crowns cemented with three adhesive systems
1989
A comparison of four in vitro marginal leakage tests applied to root surface restorations
1992
Cardiorespiratory Fitness as a Quantitative Predictor of All-Cause Mortality and Cardiovascular Events in Healthy Men and Women
2009 Standout
Cure width potential for MOD resin composite molar restorations
2008
Effect of load‐cycling on bond between composite fillings and dentin established by Gluma and various resins
1988
Fluoride release from model glass ionomer cements
2002
Degree of conversion and color stability of the light curing resin with new photoinitiator systems
2009
Polymerization shrinkage and contraction stress of dental resin composites
2005 Standout
Effect of 4-Acryloxyethyltrimellitic Acid in a Self-etching Primer on Bonding to Ground Dentin
1996
Photoelastic analysis of polymerization contraction stresses in resin composite restorations
1998
Depth of cure of resin composites: Is the ISO 4049 method suitable for bulk fill materials?
2012
Effect of human saliva on surface degradation of composite resins
1991
Influence of Photoactivation Protocol and Light Guide Distance on Conversion and Microleakage of Composite Restorations
2009
Resistance to fracture of endodontically treated teeth restored with different post systems
2002
Influence of pH and storage time on the sorption and solubility behaviour of three composite resin materials
2001
Probing the origins and control of shrinkage stress in dental resin-composites: I. Shrinkage stress characterization technique*
2004
Effect of HEMA on bonding to dentin
1992
Efficacy of Dentin Bonding Agents Combined with Self-etching Dentin Primers Containing Phenyl-P
1993
Determination of leachable components from four commercial dental composites by gas and liquid chromatography/mass spectrometry
1998
How much do resin-based dental materials release? A meta-analytical approach
2011
Effect of light power density variations on bulk curing properties of dental composites
2003
Development of highly reactive mono-(meth)acrylates as reactive diluents for dimethacrylate-based dental resin systems
2004
Formation of gaps at the filler–resin interface induced by polymerization contraction stress
2010
Effect of Ramped Light Intensity on Polymerization Force and Conversion in a Photoactivated Composite
2000
The shape of the spine in young males with and without back complaints
1986
Factors involved in the development of polymerization shrinkage stress in resin-composites: A systematic review
2005 Standout
Possible mechanisms of central nervous system fatigue during exercise
1997
Effects of two amine reducing agents on the degree of conversion and physical properties of an unfilled light-cured resin
1993
Effect of light exposure on fracture toughness and flexural strength of light-cured composites
1996
Morphological Changes of Rabbit Skin by Application of Dentin Primer
1990
Competitive light absorbers in photoactive dental resin-based materials
2012
Effect of Stepped Light Intensity on Polymerization Force and Conversion in a Photoactivated Composite
2000
The effect of light intensity on double bond conversion and flexural strength of a model, unfilled dental resin
2003
Effects of flowable resin on bond strength and gap formation in class I restorations
2004
The use of flowable composites as filled adhesives
2002
The micro-Raman spectroscopy, a useful tool to determine the degree of conversion of light-activated composite resins
1999
Effect of temperature and duration of post‐cure on in vitro wear and quantity of remaining double bonds of resins containing carboxylic anhydride
1995
In vitro bond strengths of three current dentin adhesives to primary and permanent teeth
1992
The Loss of Skeletal Muscle Strength, Mass, and Quality in Older Adults: The Health, Aging and Body Composition Study
2006 Standout
Polymerization of resin composite restorative materials: exposure reciprocity
2003
Sorption and solubility of resin-based restorative dental materials
2003
Influence of marginal opening on microleakage of cemented artificial crowns
1994
Effects of different photo-polymerization protocols on resin–dentine μTBS, mechanical properties and cross-link density of a nano-filled resin composite
2012
Specimen aspect ratio and light transmission in photoactive dental resins
2012
Thermal cycling procedures for laboratory testing of dental restorations
1999 Standout
Fluoride release and recharge in giomer, compomer and resin composite
2004
Enzymatic hydrolysis of (di)methacrylates and their polymers
1990
Polymerization contraction stress in dual-cure cements and its effect on interfacial integrity of bonded inlays
2002
The influence of postcuring on the fracture properties of photo‐cured dimethacrylate based dental composite resin
1987
Wall‐to‐wall polymerization contraction of composite resins versus filler content
1987
Fracture resistance of endodontically treated teeth restored with composite posts
2003
Mixed class V restorations: the potential of a dentine bonding agent
1990
Water absorption, dimensional change and radial pressure in resin matrix dental restorative materials
2003
How light source and product shade influence cure depth for a contemporary composite
2005
Effect of two dentin bonding agents on microleakage in two different cavity designs
1992
An SEM evaluation of several adhesive systems used for bonding fiber posts under clinical conditions
2002
Photoinitiation chemistry affects light transmission and degree of conversion of curing experimental dental resin composites
2006
How light irradiance and curing time affect monomer conversion in light‐cured resin composites
2003
Review on fluoride-releasing restorative materials—Fluoride release and uptake characteristics, antibacterial activity and influence on caries formation
2006 Standout
Marginal seal of new-generation dental bonding agents
1994
Effect of food and oral simulating fluids on structure of adhesive composite systems
1995
Effect of nanofiller fractions and temperature on polymerization shrinkage on glass fiber reinforced filling material
2007
Dental luting agents: A review of the current literature
1998 Standout
BisGMA/TEGDMA ratio and filler content effects on shrinkage stress
2011
Permeability and microleakage of Class II resin composite restorations
1994
Elution of leachable components from resin composites after plasma arc vs. standard or soft-start halogen light irradiation
2002
Porcelain-composite interface microleakage with various porcelain surface treatments
1991
Elution parameters and HPLC-detection of single components from resin composite
1999
Dimensional changes of demineralized dentin treated with HEMA primers
2000
Resin composites in dentistry: the monomer systems
1997 Standout
Thiol–Ene Click Chemistry
2010 Standout
The effect of the air-blowing step on the technique sensitivity of four different adhesive systems
2005
Characterisation of tribochemically assisted bonding of composite resin to porcelain and metal
2000
Static and cyclic loading of fiber-reinforced dental resin
2003
Quantitative microleakage of some dentinal bonding restorative systems
1993
The reliability of standardized flexure strength testing procedures for a light-activated resin-based composite
2005
Heterocyclic Carbenes: Synthesis and Coordination Chemistry
2008 Standout
Evaluation of a New Adhesive Liner as an Adhesive Promotor and a Desensitizer on Hypersensitive Dentin
1987
Self-curing, self-etching adhesive cement systems.
2005
Task Force 8: Classification of sports
2005
Quantity of Remaining Double Bonds of Propanal-containing Resins
1994
Visible light‐cured composite resins: polymerization contraction, contraction pattern and hygroscopic expansion
1982
The cavity sealing ability of composite restorations subjected to thermal stress
1978
Fracture toughness and microhardness of a composite: do they correlate?
2003
Conversion of dual cure luting cements
1995
Alternatives in Polymerization Contraction Stress Management
2004
Composition, wetting properties and bond strength with dentin of 6 new dentin adhesives
1985
Progression Models in Resistance Training for Healthy Adults
2002 Standout
Exercise and Physical Activity for Older Adults
2009 Standout
Materials Science
1981
Relation of Dental Composite Formulations To Their Degradation and the Release of Hydrolyzed Polymeric-Resin-Derived Products
2001
Degradation of Glass Filler in Experimental Composites
1981
Elevated muscle glycogen and anaerobic energy production during exhaustive exercise in man.
1992
Fourier Transform Infrared Analysis of Degree of Polymerization in Unfilled Resins—Methods Comparison
1984
Remaining methacrylate groups in composite restorative materials
1978
Studies on Adhesion to Tooth Substrate. VI. The Adhesion of Composite Resin to Dentin Mediated by the Dentin Primer Containing MTYA.
1989
The effect of resin formulation on the degree of conversion and mechanical properties of dental restorative resins
1986
Depth of cure of radiation ‐ activated composite restoratives‐ Influence of shade and opacity
1995
Report of the Committee on Scientific Investigation of the American Academy of Restorative Dentistry
1992
The polymerization contraction of visible-light activated composite resins
1988
Correlation between hardness and degree of conversion during the setting reaction of unfilled dental restorative resins
1985
Dental Resins with Reduced Shrinkage During Hardening
1979
Thermal Variations in the Pulp Chamber Associated with Composite Insertion Techniques and Light-curing Methods
2009
Effects of surface treatments on shear bond strengths between a resin cement and an alumina core
2000
Effects of acid and cleansing agents on shear bond strength and marginal microleakage of glass-ionomer cements
1989
Clinical significance of polymerization shrinkage of composite resins
1982
Water sorption of polymethacrylate networks: Bis‐GMA/TEGDM copolymers
1987
Degree of double bond conversion in light-cured composites
1987
Polymerization contraction and reaction kinetics of three chemically activated restorative resins
1988
Polymerization shrinkage and polymerization shrinkage stress in polymer-based restoratives
1997 Standout
The effect of removal of the smear layer on microleakage of Class V restorations in vitro
1988
Benefits and Limitations of Adding Hyperbranched Polymers to Dental Resins
2012
Methacrylate and epoxy functionalized nanocomposites based on silsesquioxane cores for use in dental applications
2007
A cross-sectional study of muscle strength and mass in 45- to 78-yr-old men and women
1991
Exercise standards. A statement for health professionals from the American Heart Association.
1990
Stable Carbenes
1999 Standout
Evaluation of two methods for assessing marginal leakage
1981
Photoinitiated Polymerization: Advances, Challenges, and Opportunities
2010 Standout
Biodegradation of Commercial Dental Composites by Cholesterol Esterase
1999
Time-dependent Deformation of Composite Resins — Compositional Considerations
1985
The Use of an Intermediate Resin in the Acid-etch Procedure: Retentive Strength, Microleakage, and Failure Mode Analysis
1982
Comparison of computational methods applied to oxazole, thiazole, and other heterocyclic compounds
1993
Tensile bond strength of dentin adhesives
1986
Efficacy of a self-curing adhesive-resin cement system on luting glass-fiber posts into root canals: an SEM investigation.
2002
Increased Wall-to-Wall Curing Contraction in Thin Bonded Resin Layers
1989
Bonding to Intact Dentin
1996
The Influence of Polymerization Shrinkage of Resin Cements on Bonding to Metal
1992
Gradual Increases in Marginal Leakage of Resin Composite Restorations with Thermal Stress
1990
Tooth–composite interface from specific and nonspecific adhesive restorative systems
2004
Water sorption in a bis(GMA)/TEGDMA resin
1984
Unpolymerized Surface Layers on Sealants
1981
Cuspal deflection in molars in relation to endodontic and restorative procedures
1995
Spinal and Supraspinal Factors in Human Muscle Fatigue
2001 Standout
Have dentin adhesives become too hydrophilic?
2003
Inhibition of Bacterial Growth under Composite Restorations Following GLUMA Pretreatment
1989
Monomer Conversion of Pre-heated Composite
2005
Tensile Bond Strength and SEM Evaluation of Caries-affected Dentin Using Dentin Adhesives
1995
Self-healing polymeric materials: A review of recent developments
2008 Standout
Materials Science
1983
Effect of thermal cycling on fracture strength and microleakage in teeth restored with a bonded composite resin
1986
Shrinkage forces due to polymerization of light-cured dental composite resin in cavities
2010
Quantity of Remaining Double Bonds of Diacetyl-containing Resins
1994
Volumetric additive manufacturing via tomographic reconstruction
2019 StandoutScience
Crystal Structure of the Dimeric (4‐tert‐Butylthiazolato)(glyme)lithium: Carbene Character of a Formyl Anion Equivalent
1995
Composition of Dental Resin and Composite Materials
1981
Effect of chemical structure on degree of conversion in light-cured dimethacrylate-based dental resins
2002
Composites for use in posterior teeth: Composition and conversion
1987
Microleakage and bond strength of resin restorations with various bonding agents
1987
Influence of Water Exposure on the Tensile Strength of Composites
1990
Effect of Scotchbond dependent on cavity cleaning, cavity diameter and cavosurface angle
1984
Correlation of Parameters used to Estimate Monomer Conversion in a Light-cured Composite
1988
Adhesive Bonding of Various Materials to Hard Tooth Tissues: Forces Developing in Composite Materials during Hardening
1983
Stiffness Increase During the Setting of Dental Composite Resins
1987
Studies on Adhesion to Tooth Substrate. IV.
1988
Contraction stresses of composite resin filling materials
1977
Molecular Toxicology of Substances Released from Resin–Based Dental Restorative Materials
2009
Recent Developments in the Chemistry of Cubic Polyhedral Oligosilsesquioxanes
2010 Standout
Photopolymerization kinetics of multifunctional monomers
2001 Standout
Setting Stress in Composite Resin in Relation to Configuration of the Restoration
1987 Standout
Cinefluorographic Study of Hyperextension of the Neck and Upper Airway Patency
1961
Influence of Incorporation of Antibacterial Monomer on Curing Behavior of a Dental Composite
1994
Adhesion to Bovine Dentin-Surface Characterization
1991
Self -etching Dentin Primers Containing Phenyl-P
1994
An in vitro study of marginal leakage associated with composite restorations using an acidified agar technique
1980
Complete Marginal Seal of Class V Resin Composite Restorations Effected by Increased Flexibility
1990
Hardening Shrinkage and Hygroscopic Expansion of Composite Resins
1982
ACSM Position Stand: The Recommended Quantity and Quality of Exercise for Developing and Maintaining Cardiorespiratory and Muscular Fitness, and Flexibility in Healthy Adults
1998 Standout
Aromaticity as a Cornerstone of Heterocyclic Chemistry
2004 Standout
Polymerization stress, shrinkage and elastic modulus of current low-shrinkage restorative composites
2010
High Overtones of C−H Stretching Vibrations in Isoxazole, Thiazole, and Related Methyl and Dimethyl Derivatives
1998
Impact of Curing Protocol on Conversion and Shrinkage Stress
2005
New Surface-active Comonomer for Adhesive Bonding
1996
Cognitive Distortions during Progressive Exercise
1986
Progressive resistance strength training for improving physical function in older adults
2009 Standout
Detecting margin leakage of dental composite restorations
1983
Properties of 2,3-butanedione and 1-phenyl-1,2-propanedione as new photosensitizers for visible light cured dental resin composites
2000
In vivo Degradation of Resin-Dentin Bonds in Humans Over 1 to 3 Years
2000 Standout
The exciton model in molecular spectroscopy
1965 Standout
The Effect of Different Intensity Modalities of Resistance Training on Beat-to-Beat Blood Pressure in Cardiac Patients
2005
The curing potential of light-activated composite resin luting agents
1991
Analysis of Photo-initiators in Visible-light-cured Dental Composite Resins
1988
Factors contributing to the incompatibility between simplified-step adhesives and chemically-cured or dual-cured composites. Part III. Effect of acidic resin monomers.
2003
The Competition between the Composite-Dentin Bond Strength and the Polymerization Contraction Stress
1984 Standout
Adhesive Bonding of Various Materials to Hard Tooth Tissues: Improvement in Bond Strength to Dentin
1982
Dentin bonding agents: correlation of early bond strength with margin gaps
1986
Modified Surface-active Monomers for Adhesive Bonding to Dentin
1993
Understanding Contradictory Data in Contraction Stress Tests
2010
Influence of Dentinal Fluid and Stress on Marginal Adaptation of Resin Composites
1993
Fracture Toughness of Experimental Dental Composites Aged in Ethanol
1995
Dentin‐polymer bond established by Gluma and tested by thermal stress
1987
Dentin smear layer: an asset or a liability for bonding?
1989
Muscle quality. I. Age-associated differences between arm and leg muscle groups
1999
Coronary Artery Anomalies
2007 Standout
Importance of Polymerization Initiator Systems and Interfacial Initiation of Polymerization in Adhesive Bonding of Resin to Dentin
1991
The effect of two smear layer cleansers on shear bond strength to dentin
1990
Influence of light intensity on polymerization shrinkage and integrity of restoration‐cavity interface
1995
Influence of Test Method on Failure Stress of Brittle Dental Materials
1990 Standout
Exposure Reciprocity Law in Photopolymerization of Multi‐Functional Acrylates and Methacrylates
2007
Refractive Index Mismatch and Monomer Reactivity Influence Composite Curing Depth
2008
Relaxation of Polymerization Contraction Stresses by Flow in Dental Composites
1984
Appropriate Physical Activity Intervention Strategies for Weight Loss and Prevention of Weight Regain for Adults
2009 Standout
Visco-elastic Parameters of Dental Restorative Materials during Setting
2000
Shear vs. Tensile Bond Strength of Resin Composite Bonded to Ceramic
1995
Preparation and Characterization of Low Polymerization Shrinkage and Bis‐GMA‐Free Dental Resin System
2015
Part 14: Pediatric Advanced Life Support
2010 Standout
Shear bond strength of a new dentin bonding restorative system
1988
In vitro cytotoxicity of three dentine bonding agents
1989
Changes in Lipid and Lipoprotein Levels After Weight Training
1984
Color stability of dental composite resin materials for crown and bridge veneers
1987 Standout
Kinetic studies of a new photoinitiator hybrid system based on camphorquinone-N-phenylglicyne derivatives for laser polymerization of dental restorative and stereolithographic (3D) formulations
1996
The use of glazing materials for finishing dental composite resin surfaces
1982
In vitro Caries-inhibitory Properties of a Silver Cermet
1989
In vitro investigation and evaluation of dentin bonding agents.
1988
Photophysical properties of 2,5-diphenyl-thiazolo[5,4-d]thiazole
2001
Exercise Testing, Training and Arm Ergometry
1985
Irradiation Modes’ Impact on Radical Entrapment in Photoactive Resins
2010
Release of Formaldehyde from Dental Composites
1988
Maximum Bond Strength of Dental Luting Cement to Amalgam Alloy
1989
The Effects of Adhesive Thickness on Polymerization Contraction Stress of Composite
2000
Hydrolytic stability of self-etching adhesive systems.
2005
Clinical status of dentine bonding agents
1989
Polymerization Kinetics of Pre-heated Composite
2006
Investigation of self-etching dentin primers
1989
Microleakage: The effect of storage and cycling duration
1987
Works of Erik Asmussen being referenced
Bonding and gap formation with a simplified gluma system
1990
Occlusal abrasion of a composite restorative resin with ultra-fine filler--an initial study.
1978
Bonding of resin cements to an aluminous ceramic: A new surface treatment
1994
Hardness of restorative resins: effect of camphorquinone, amine, and inhibitor
1989
In vivo fractures of endodontically treated posterior teeth restored with amalgam
1990
Bonding of luting materials for resinbonded bridges: clinical relevance of in vitro tests
1994
Flexural strength and modulus of a step‐cured resin composite
2004
Visible-Light Curing Units: Correlation Between Depth of Cure and Distance Between Exit Window and Resin Surface
1997
Silicoating: evaluation of a new method of bonding composite resin to metal
1988
Mechanical properties of endodontic posts
1997
Influence of Curing Rate of Resin Composite on the Bond Strength to Dentin
2007
Elution of TEGDMA and BisGMA from a resin and a resin composite cured with halogen or plasma light
2000
Reliay of three dental radiometers
1993
In vitro wear, hardness, and conversion of diacetyl-containing and propanal-containing resin materials
1996
Two-step curing: influence on conversion and softening of a dental polymer
2003
Effect of polyacrylic acid treatment of dentin on adhesion of glass ionomer cement
1990
Oxygen-inhibited surface layers on Microfill Pontic
1989
Mechanical properties of heat treated restorative resins for use in the inlay/onlay technique
1990
In vivo fractures of endodontically treated posterior teeth restored with enamel‐bonded resin
1990
Aluminum oxalate/glycine solutions as pretreatment in the Gluma bonding system
1989
Temperature rise induced by some light emitting diode and quartz‐tungsten‐halogen curing units
2005
Adherence of resin-based luting agents assessed by the energy of fracture
1993
Polymer structure of a light‐cured resin composite in relation to distance from the surface
2003
Influence of selected components on crosslink density in polymer structures
2001
The effect of postcuring on quantity of remaining double bonds, mechanical properties, and in vitro wear of two resin composites
2000
Effect of postponed polishing on marginal adaptation of resin used with dentin‐bonding agent
1988
Polymerization contraction of resin composite vs. energy and power density of light‐cure
2005
Influence of UEDMA, BisGMA and TEGDMA on selected mechanical properties of experimental resin composites
1998
Influence of composition on rate of polymerization contraction of light-curing resin composites
2002
Effect of propanal and diacetyl on quantity of remaining double bonds of chemically cured BisGMA/TEGDMA resins
1996
Influence of dentin‐bonding agents and a glass‐ionomer base on the cervical marginal seal of Class II composite restorations
1988
Determinants of in vitro gap formation of resin composites
2003
Softening and elution of monomers in ethanol
2009
Improved efficacy of dentin‐bonding agents
1997
Modulus of resilience as predictor for clinical wear of restorative resins
1992
Correlation between depth of cure and temperature rise of a light‐activated resin
1993
Surface energy characteristics of adhesive monomers
1998
Effect of ketone content and monomer composition on selected mechanical properties
1992
Influence of specimen diameter on the relationship between subsurface depth and hardness of a light‐cured resin composite
2003
Influence of curing protocol on selected properties of light-curing polymers: Degree of conversion, volume contraction, elastic modulus, and glass transition temperature
2009
Influence of temporary filling materials on effect of dentin‐bonding agents
1987
Correlation between depth of cure and surface hardness of a light‐activated resin
1993
Direction of shrinkage of light-curing resin composites
1999
Characterization of resin composites polymerized with plasma arc curing units
2000
Marginal adaptation of a restorative resin polymerized at reduced rate
1991
Effects of surface treatment on the free surface energy of dentin
1994
Penetration of restorative resins into acid etched enamel. II: Dissolution of entrapped air in restorative resin monomers
1977
An accelerated test for color stability of restorative resins
1981
Long-term fluoride release from a glass ionomer cement, a compomer, and from experimental resin composites
2002
Bonding to dentine with a simplified Gluma system.
1989
Bonding of restorative resins to dentine: status of dentine adhesives and impact on cavity design and filling techniques.
1988
[A comparison of accuracy in seating and gap formation for three inlay/onlay techniques].
1991
Influence of Aldehydes on Selected Mechanical Properties of Resin Composites
1992
Comparative study of dentin adhesives
1985
The influence of relative humidity on the effect of dentin bonding systems.
2001
Dentin-Polymer Bond Promoted by Gluma and Various Resins
1985
NMR-analysis of monomers in restorative resins
1975
A comparison of accuracy in seating and gap formation for three inlay/onlay techniques.
1990
Effect of pulse-delay curing on in vitro wall-to-wall contraction of composite in dentin cavity preparations.
2001
Factors Affecting the Color Stability of Restorative Resins
1983
Setting time of composite restorative resins vs. content of amine, peroxide, and inhibitor
1981
Influence of the Solubility Parameter of Intermediary Resin on the Effectiveness of the Gluma Bonding System
1991
ISOMETRIC MUSCLE STRENGTH IN RELATION TO AGE IN MEN AND WOMEN
1962
Effect of temperature and duration of post‐cure on selected mechanical properties of resin composites containing carboxylic anhydrides
1992
A qualitative and quantitative analysis of tertiary amines in restorative resins
1980
Composite restorations: influence of flowable and self-curing resin composite linings on microleakage in vitro.
2003
Solubility Parameters, Fractional Polarities, and Bond Strengths of Some Intermediary Resins Used in Dentin Bonding
1993
Opacity of glass-ionomer cements
1983
Restorative resins: hardness and strength vs. quantity of remaining double bonds
1982
Soft-start polymerization and marginal gap formation in vitro.
2001
Surface hardness and wear of glass ionomers and compomers.
1997
Effect of wettability of adhesive resins on bonding to dentin.
1994
A central nervous component in local muscular fatigue
1978
Effect of five adhesives on adaptation of resin in dentin cavities
1984
Form and function of the erect human spine.
1962
Short- and long-term bonding efficacy of a self-etching, one-step adhesive.
2003
Dentine and enamel bonding agents.
1987
Dentin‐polymer bond mediated by glutaraldehyde/HEMA
1985
Recuperation after muscular fatigue by ?diverting activities?
1978
Substitutes for N-Phenylglycine in Adhesive Bonding to Dentin
1989
The stability of water in the pores of acid etched human enamel
1978
Marginal adaptation of posterior resins: Effect of dentin-bonding agent and hygroscopic expansion
1989
Correlation between tensile and bond strength of composite resins
1980
Influence of Pulse-Delay Curing on Softening of Polymer Structures
2001
Muscle fatigue. June 1979.
1993
Tensile strength of restorative resins
1980
Determination of Maximum Working Capacity at Different Ages in Work with the Legs or with the Arms
1958
The effect of temperature changes on adaptation of resin fillings. II
1974
The effect of temperature changes on adaptation of resin fillings. I
1974
Enamel damages caused by contracting restorative resins
1975
Composite wall‐to‐wall polymerization contraction in dentin cavities treated with various bonding agents
1985
Increased bonding of a glass‐ionomer cement to dentin by means of FeC13
1981
Bonding of restorative resins to dentine promoted by aqueous mixtures of aldehydes and active monomers.
1985
Formaldehyde as bonding agent between dentin and restorative resins
1984
Marginal adaptation of restorative resins in acid etched cavities
1977
Factors affecting the quantity of remaining double bonds in restorative resin polymers
1982
Similarities and dissimilarities between static and dynamic exercise.
1981
Mechanical properties of endodontic posts
1997
Microwave spectra of isotopic thiazoles. Molecular structure and 14N quadrupole coupling constants of thiazole
1971
Adhesive systems: effect on bond strength of incorrect use.
2002
Bonding of restorative resins to dentin by means of methacryloylchloride and methacryloyl‐R‐isocyanate
1983
Composite restorative resins: Composition versus wall-to-wall polymerization contraction
1975
Retrograde root filling with composite and a dentin‐bonding agent. 1
1991
Stiffness, elastic limit, and strength of newer types of endodontic posts
1999
Clinical relevance of physical, chemical, and bonding properties of composite resins.
1985
Resin Composite Properties and Energy Density of Light Cure
2005
Light-emitting diode curing: influence on selected properties of resin composites.
2003
Improved efficacy of some phosphate-based dentin-bonding agents
1989
Effect of combining dentin bonding agents
1985
ENERGY REQUIREMENTS OE PRACTICAL JOBS FROM PULSE INCREASE AND ERGOMETER TEST
1962
Effect of Acidic Pretreatment on Adhesion to Dentin Mediated by Gluma
1987
Factors Affecting the Adherence Energy of Experimental Resin Cements Bonded to a Nickel-Chromium Alloy
1995
Quantitative analysis of peroxides in restorative resins
1980
[A microscopic investigation of the adaptation of some plastic filling materials].
1971
Cavity preparation for restorative resins used with dentin adhesives
1985
AIR PASSAGE THROUGH THE HYPOPHARYNX IN UNCONSCIOUS PATIENTS IN THE PRONE POSITION
1959
Adhesion of restorative resins to dentin: chemical and physicochemical aspects.
1992
Influence of Ketones on Selected Mechanical Properties of Resin Composites
1992
Penetration of restorative resins into acid etched enamel. I: Viscosity, surface tension and contact angle of restorative resin monomers
1977
[Plastic materials--composition and types].
1987
Softening of BISGMA‐based polymers by ethanol and by organic acids of plaque
1984
Materials Science Bond Strength Between Dentin and Restorative Resins Mediated by Mixtures of HEMA and Glutaraldehyde
1984
A Microscopic Investigation of the Adaptation of Some Plastic Filling Materials to Dental Cavity Walls
1972
Lactate Production and Anaerobic Work Capacity after Prolonged Exercise
1974
Influence of Carboxylic Anhydrides on Selected Mechanical Properties of Heat-cured Resin Composites
1991