Citation Impact
Citing Papers
Sustainable urban rail systems: Strategies and technologies for optimal management of regenerative braking energy
2013 Standout
Research on a 20-Slot/22-Pole Five-Phase Fault-Tolerant PMSM Used for Four-Wheel-Drive Electric Vehicles
2014
Detection and Localization of Stator Resistance Dissymmetry Based on Multiple Reference Frame Controllers in Multiphase Induction Motor Drives
2012
High-power wind energy conversion systems: State-of-the-art and emerging technologies
2015 Standout
Recent Advances and Industrial Applications of Multilevel Converters
2010 Standout
Overview of Electric Motor Technologies Used for More Electric Aircraft (MEA)
2011 Standout
Fault Detection and Fault Tolerant Operation of a Five Phase PM Motor Drive Using Adaptive Model Identification Approach
2014
Progress in triboelectric nanogenerators as a new energy technology and self-powered sensors
2015 Standout
A Generalized Fault-Tolerant Control Strategy for Five-Phase PM Motor Drives Considering Star, Pentagon, and Pentacle Connections of Stator Windings
2013
Fully FPGA-Based Sensorless Control for Synchronous AC Drive Using an Extended Kalman Filter
2012
Recent Advances in the Design, Modeling, and Control of Multiphase Machines—Part I
2015 Standout
A comprehensive review on PEM water electrolysis
2013 Standout
Multiphysics simulation of a PEM electrolyser: Energetic Macroscopic Representation approach
2010
Multiphase induction motor drives – a technology status review
2007
Dual-Plane Vector Control of a Five-Phase Induction Machine for an Improved Flux Pattern
2008
Triboelectric Nanogenerator: A Foundation of the Energy for the New Era
2018 Standout
Multiphase Electric Machines for Variable-Speed Applications
2008 Standout
Effect of Stator Winding Connection of Five-Phase Induction Machines on Torque Ripples Under Open Line Condition
2014
Postfault Operation of an Asymmetrical Six-Phase Induction Machine With Single and Two Isolated Neutral Points
2014
Modelling and control of a multi-phase permanent magnet synchronous generator and efficient hybrid 3L-converters for large direct-drive wind turbines
2012
High-Torque-Density Control of Multiphase Induction Motor Drives Operating Over a Wide Speed Range
2014
Magnet Shape Optimization to Reduce Pulsating Torque for a Five-Phase Permanent-Magnet Low-Speed Machine
2013
Energy Storage System With Supercapacitor for an Innovative Subway
2010
Control of Multiphase Induction Motors With an Odd Number of Phases Under Open-Circuit Phase Faults
2011
Drive Topologies for Solar-Powered Aircraft
2009
A review on developments of polyphase machines
2020
Comparison of energy management strategies of a battery/supercapacitors system for electric vehicle under real-time constraints
2015
Multilayer wavy-structured robust triboelectric nanogenerator for harvesting water wave energy
2016
Thermal Analysis of a Five-Phase Motor Under Faulty Operations
2013
A Unified Fault-Tolerant Current Control Approach for Five-Phase PM Motors With Trapezoidal Back EMF Under Different Stator Winding Connections
2012
Hybrid battery/supercapacitor energy storage system for the electric vehicles
2017 Standout
Hybrid triboelectric nanogenerator for harvesting water wave energy and as a self-powered distress signal emitter
2014
Global Fault-Tolerant Control Technique for Multiphase Permanent-Magnet Machines
2014
A systems approach to reduce urban rail energy consumption
2014 Standout
Aircraft Hybrid-Electric Propulsion: Development Trends, Challenges and Opportunities
2021 Standout
Speed Control of Five-Phase Induction Motors With Integrated Open-Phase Fault Operation Using Model-Based Predictive Current Control Techniques
2013
Industrial Applications of the Kalman Filter: A Review
2013 Standout
Fractional-Slot Concentrated-Windings Synchronous Permanent Magnet Machines: Opportunities and Challenges
2009 Standout
Works of Eric Semail being referenced
Control of a Seven-phase Axial Flux Machine Designed for Fault Operation
2006
A Method for Fault Detection and Isolation Based on the Processing of Multiple Diagnostic Indices: Application to Inverter Faults in AC Drives
2013
Vectorial Approach-Based Control of a Seven-Phase Axial Flux Machine Designed for Fault Operation
2008
Torque tracking strategy for anti-slip control in railway traction systems with common supplies
2004
Multi-criteria-based design approach of multi-phase permanent magnet low-speed synchronous machines
2009
Fault tolerant multiphase electrical drives: the impact of design
2008
Generic control method of multileg voltage-source-converters for fast practical implementation
2003
Study of an innovative electrical machine fitted to marine current turbines
2007
Design and study of a multiphase axial-flux machine
2006
High-speed functionality optimization of five-phase PM machine using third harmonic current
2014
Identification of sensitive R-L parameters of a multiphase drive by a vector control
2008
A Vectorial Approach for Generation of Optimal Current References for Multiphase Permanent-Magnet Synchronous Machines in Real Time
2011
General Analytical Model of Magnet Average Eddy-Current Volume Losses for Comparison of Multiphase PM Machines With Concentrated Winding
2014
Fault-Tolerant Operation of an Open-End Winding Five-Phase PMSM Drive With Short-Circuit Inverter Fault
2015
Multi-Phase System Supplied by Svm Vsi: A New Fast Algorithm to Compute Duty Cycles
2004
Right harmonic spectrum for the back-electromotive force of a n-phase synchronous motor
2004
Vectorial formalism for analysis and design of polyphase synchronous machines
2003