Citation Impact
Citing Papers
Ultrathin Polyaniline-based Buffer Layer for Highly Efficient Polymer Solar Cells with Wide Applicability
2014
A polymer tandem solar cell with 10.6% power conversion efficiency
2013 Standout
Recent advances in water/alcohol-soluble π-conjugated materials: new materials and growing applications in solar cells
2013
High Open Circuit Voltage in Regioregular Narrow Band Gap Polymer Solar Cells
2014
Efficient Small Bandgap Polymer Solar Cells with High Fill Factors for 300 nm Thick Films
2013
Organic solar cells based on non-fullerene acceptors
2018 Standout
A carbon-oxygen-bridged ladder-type building block for efficient donor and acceptor materials used in organic solar cells
2017
Charge and Spin Transport in an Organic Molecular Square
2015 StandoutNobel
26 mA cm−2 Jsc from organic solar cells with a low-bandgap nonfullerene acceptor
2017
From Binary to Ternary Solvent: Morphology Fine‐tuning of D/A Blends in PDPP3T‐based Polymer Solar Cells
2012
Rhodium(III)‐Catalyzed ortho CH Heteroarylation of (Hetero)aromatic Carboxylic Acids: A Rapid and Concise Access to π‐Conjugated Poly‐heterocycles
2015
Bithiopheneimide–Dithienosilole/Dithienogermole Copolymers for Efficient Solar Cells: Information from Structure–Property–Device Performance Correlations and Comparison to Thieno[3,4-c]pyrrole-4,6-dione Analogues
2012
Efficient organometal trihalide perovskite planar-heterojunction solar cells on flexible polymer substrates
2013 Standout
A Selenium‐Substituted Low‐Bandgap Polymer with Versatile Photovoltaic Applications
2012
Synthesis and photovoltaic properties of acceptor materials based on the dimerization of fullerene C60 for use in efficient polymer solar cells
2013
Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells
2014 Standout
18% Efficiency organic solar cells
2020 Standout
Single-junction organic solar cells with over 19% efficiency enabled by a refined double-fibril network morphology
2022 Standout
Tailored Donor–Acceptor Polymers with an A–D1–A–D2 Structure: Controlling Intermolecular Interactions to Enable Enhanced Polymer Photovoltaic Devices
2014
Low bandgap conjugated polymers based on mono-fluorinated isoindigo for efficient bulk heterojunction polymer solar cells processed with non-chlorinated solvents
2014
The effect of polymer solubilizing side-chains on solar cell stability
2015
Non-fullerene acceptors for organic solar cells
2018 Standout
3d Transition Metals for C–H Activation
2018 Standout
Photothermal therapy and photoacoustic imaging via nanotheranostics in fighting cancer
2018 Standout
Organic and solution-processed tandem solar cells with 17.3% efficiency
2018 StandoutScience
Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells
2017 Standout
Chemically Controlled Reversible and Irreversible Extraction Barriers Via Stable Interface Modification of Zinc Oxide Electron Collection Layer in Polycarbazole‐based Organic Solar Cells
2014
Thiophene–Thiazolothiazole Copolymers: Significant Impact of Side Chain Composition on Backbone Orientation and Solar Cell Performances
2013
Efficient, Flexible, and Ultra‐Lightweight Inverted PbS Quantum Dots Solar Cells on All‐CVD‐Growth of Parylene/Graphene/oCVD PEDOT Substrate with High Power‐per‐Weight
2020 StandoutNobel
Chiral Redox-Active Isosceles Triangles
2016 StandoutNobel
25th Anniversary Article: Bulk Heterojunction Solar Cells: Understanding the Mechanism of Operation
2013 StandoutNobel
Oxidative Coupling between Two Hydrocarbons: An Update of Recent C–H Functionalizations
2015 Standout
Stability of organic solar cells: challenges and strategies
2016
High-performance multiple-donor bulk heterojunction solar cells
2015
Side-chain engineering of high-efficiency conjugated polymer photovoltaic materials
2014
Relating Recombination, Density of States, and Device Performance in an Efficient Polymer:Fullerene Organic Solar Cell Blend
2013
Development of Polymer Acceptors for Organic Photovoltaic Cells
2014
Side-Chain Engineering of Isoindigo-Containing Conjugated Polymers Using Polystyrene for High-Performance Bulk Heterojunction Solar Cells
2013
Morphological Control for Highly Efficient Inverted Polymer Solar Cells Via the Backbone Design of Cathode Interlayer Materials
2014
An Efficient Triple‐Junction Polymer Solar Cell Having a Power Conversion Efficiency Exceeding 11%
2014
A combination of Al-doped ZnO and a conjugated polyelectrolyte interlayer for small molecule solution-processed solar cells with an inverted structure
2013
Improving Structural Order for a High‐Performance Diketopyrrolopyrrole‐Based Polymer Solar Cell with a Thick Active Layer
2013
Importance of the Donor:Fullerene Intermolecular Arrangement for High-Efficiency Organic Photovoltaics
2014
Understanding Low Bandgap Polymer PTB7 and Optimizing Polymer Solar Cells Based on It
2014
A carbon–oxygen-bridged hexacyclic ladder-type building block for low-bandgap nonfullerene acceptors
2018
Influence of Polymer Compatibility on the Open-Circuit Voltage in Ternary Blend Bulk Heterojunction Solar Cells
2014
Organic and Polymeric Semiconductors Enhanced by Noncovalent Conformational Locks
2017
Single-Junction Organic Solar Cell with over 15% Efficiency Using Fused-Ring Acceptor with Electron-Deficient Core
2019 Standout
Efficient ternary blend polymer solar cells with indene-C60 bisadduct as an electron-cascade acceptor
2014
Extensive Penetration of Evaporated Electrode Metals into Fullerene Films: Intercalated Metal Nanostructures and Influence on Device Architecture
2015
New conjugated molecular scaffolds based on [2,2]paracyclophane as electron acceptors for organic photovoltaic cells
2014
Molecular Design toward Highly Efficient Photovoltaic Polymers Based on Two-Dimensional Conjugated Benzodithiophene
2014
Solution processable tungsten polyoxometalate as highly effective cathode interlayer for improved efficiency and stability polymer solar cells
2013
Benzobisthiazole as Weak Donor for Improved Photovoltaic Performance: Microwave Conductivity Technique Assisted Molecular Engineering
2013
Optimization of the Power Conversion Efficiency of Room Temperature‐Fabricated Polymer Solar Cells Utilizing Solution Processed Tungsten Oxide and Conjugated Polyelectrolyte as Electrode Interlayer
2014
Photoinduced Hole Transfer Becomes Suppressed with Diminished Driving Force in Polymer‐Fullerene Solar Cells While Electron Transfer Remains Active
2012
Organic Dye Based Nanoparticles for Cancer Phototheranostics
2018
Molecular Design of Benzodithiophene-Based Organic Photovoltaic Materials
2016
Functional π-Gelators and Their Applications
2014 Standout
Low-bandgap conjugated polymers enabling solution-processable tandem solar cells
2017
Non-fullerene acceptor with low energy loss and high external quantum efficiency: towards high performance polymer solar cells
2016
Recent Developments in C–H Activation for Materials Science in the Center for Selective C–H Activation
2018
Nonfullerene Acceptor Molecules for Bulk Heterojunction Organic Solar Cells
2018 Standout
Self-Organization of Amine-Based Cathode Interfacial Materials in Inverted Polymer Solar Cells
2014
Photoconductive Cathode Interlayer for Highly Efficient Inverted Polymer Solar Cells
2015
Low-Bandgap Near-IR Conjugated Polymers/Molecules for Organic Electronics
2015
Synergistic Effect of Fluorination on Molecular Energy Level Modulation in Highly Efficient Photovoltaic Polymers
2013
Beyond PCBM: methoxylated 1,4-bisbenzyl[60]fullerene adducts for efficient organic solar cells
2015
Efficient Tandem and Triple-Junction Polymer Solar Cells
2013
Research opportunities to advance solar energy utilization
2016 StandoutScience
Harnessing self-assembly strategies for the rational design of conjugated polymer based materials
2013
High‐Efficiency Polymer Solar Cells Achieved by Doping Plasmonic Metallic Nanoparticles into Dual Charge Selecting Interfacial Layers to Enhance Light Trapping
2013
Imide- and Amide-Functionalized Polymer Semiconductors
2014
25th Anniversary Article: A Decade of Organic/Polymeric Photovoltaic Research
2013
All polymer photovoltaics: From small inverted devices to large roll-to-roll coated and printed solar cells
2013
Efficient Semitransparent CsPbI3 Quantum Dots Photovoltaics Using a Graphene Electrode
2019 StandoutNobel
Remove the Residual Additives toward Enhanced Efficiency with Higher Reproducibility in Polymer Solar Cells
2013
Charge transfer state energy in ternary bulk-heterojunction polymer–fullerene solar cells
2014
Next-generation organic photovoltaics based on non-fullerene acceptors
2018 Standout
Carbon–Oxygen‐Bridged Ladder‐Type Building Blocks for Highly Efficient Nonfullerene Acceptors
2018
Selective Formation of End-on Orientation between Polythiophene and Fullerene Mediated by Coordination Nanospaces
2018 StandoutNobel
Single‐Junction Organic Photovoltaic Cells with Approaching 18% Efficiency
2020 Standout
Enhanced electron extraction using SnO2 for high-efficiency planar-structure HC(NH2)2PbI3-based perovskite solar cells
2016 Standout
Highly Efficient 2D-Conjugated Benzodithiophene-Based Photovoltaic Polymer with Linear Alkylthio Side Chain
2014
Phosphonic Acid Modification of the Electron Selective Contact: Interfacial Effects in Perovskite Solar Cells
2019 StandoutNobel
Realizing Small Energy Loss of 0.55 eV, High Open‐Circuit Voltage >1 V and High Efficiency >10% in Fullerene‐Free Polymer Solar Cells via Energy Driver
2017
Improved Efficiency of Bulk Heterojunction Polymer Solar Cells by Doping Low-Bandgap Small Molecules
2014
Low Band‐Gap Conjugated Polymers with Strong Interchain Aggregation and Very High Hole Mobility Towards Highly Efficient Thick‐Film Polymer Solar Cells
2014
Efficient organic solar cells processed from hydrocarbon solvents
2016 Standout
Bulk‐Heterojunction Organic Solar Cells: Five Core Technologies for Their Commercialization
2016
Additives for morphology control in high-efficiency organic solar cells
2013
Recent Advances in Bulk Heterojunction Polymer Solar Cells
2015 Standout
Single-junction polymer solar cells with high efficiency and photovoltage
2015 Standout
Near-infrared fluorophores for biomedical imaging
2017 Standout
An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells
2015 Standout
Polymer Main‐Chain Substitution Effects on the Efficiency of Nonfullerene BHJ Solar Cells
2017
A Fluorinated Polythiophene Derivative with Stabilized Backbone Conformation for Highly Efficient Fullerene and Non-Fullerene Polymer Solar Cells
2016
Highly efficient polymer solar cells cast from non-halogenated xylene/anisaldehyde solution
2015
Tetrafluoroquinoxaline based polymers for non-fullerene polymer solar cells with efficiency over 9%
2016
N-Acyldithieno[3,2-b:2′,3′-d]pyrrole-Based Low-Band-Gap Conjugated Polymer Solar Cells with Amine-Modified [6,6]-Phenyl-C61-butyric Acid Ester Cathode Interlayers
2013
Thermally Activated Delayed Fluorescence Materials Towards the Breakthrough of Organoelectronics
2014 Standout
Visibly‐Transparent Organic Solar Cells on Flexible Substrates with All‐Graphene Electrodes
2016
Conductive Conjugated Polyelectrolyte as Hole‐Transporting Layer for Organic Bulk Heterojunction Solar Cells
2013 Nobel
Fullerene‐Free Polymer Solar Cells with over 11% Efficiency and Excellent Thermal Stability
2016 Standout
Medium-Bandgap Conjugated Polymers Containing Fused Dithienobenzochalcogenadiazoles: Chalcogen Atom Effects on Organic Photovoltaics
2016
Nanoscale Dispersions of Gelled SnO2: Material Properties and Device Applications
2013
Works of Eric Richard being referenced
High performance low band gap polymer solar cells with a non-conventional acceptor
2012
The investigation of donor-acceptor compatibility in bulk-heterojunction polymer systems
2013
Synthesis of 5H-Dithieno[3,2-b:2′,3′-d]pyran as an Electron-Rich Building Block for Donor–Acceptor Type Low-Bandgap Polymers
2013
Synthesis of 5H-Dithieno[3,2-b:2′,3′-d]pyran as an Electron-Rich Building Block for Donor–Acceptor Type Low-Bandgap Polymers
2013
Electrostatic Self‐Assembly Conjugated Polyelectrolyte‐Surfactant Complex as an Interlayer for High Performance Polymer Solar Cells
2012
Novel fullerene acceptors: synthesis and application in low band gap polymer solar cells
2012
Systematic Investigation of Benzodithiophene- and Diketopyrrolopyrrole-Based Low-Bandgap Polymers Designed for Single Junction and Tandem Polymer Solar Cells
2012