Citation Impact
Citing Papers
A fused-ring based electron acceptor for efficient non-fullerene polymer solar cells with small HOMO offset
2016
11.4% Efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor
2016
Efficient Semitransparent Solar Cells with High NIR Responsiveness Enabled by a Small‐Bandgap Electron Acceptor
2017
Effects of the Morphology of a ZnO Buffer Layer on the Photovoltaic Performance of Inverted Polymer Solar Cells
2012
Factors Limiting Device Efficiency in Organic Photovoltaics
2012
Practical Roadmap and Limits to Nanostructured Photovoltaics
2011
Dual Plasmonic Nanostructures for High Performance Inverted Organic Solar Cells
2012
High Open Circuit Voltage in Regioregular Narrow Band Gap Polymer Solar Cells
2014
Exploring the origin of high optical absorption in conjugated polymers
2016
Organic solar cells based on non-fullerene acceptors
2018 Standout
Rethinking amide bond synthesis
2011 StandoutNature
Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes
2021 StandoutNature
Substituent effects on the electronic structure of siloles
2009
Tuning indium tin oxide work function with solution-processed alkali carbonate interfacial layers for high-efficiency inverted organic photovoltaic cells
2013
High-efficiency polymer solar cells with small photon energy loss
2015
Fluorine Substituents Reduce Charge Recombination and Drive Structure and Morphology Development in Polymer Solar Cells
2013
Largely Enhanced Efficiency with a PFN/Al Bilayer Cathode in High Efficiency Bulk Heterojunction Photovoltaic Cells with a Low Bandgap Polycarbazole Donor
2011
Charge and Spin Transport in an Organic Molecular Square
2015 StandoutNobel
Comparing spiro-OMeTAD and P3HT hole conductors in efficient solid state dye-sensitized solar cells
2011
A Polybenzo[1,2‐b:4,5‐b′]dithiophene Derivative with Deep HOMO Level and Its Application in High‐Performance Polymer Solar Cells
2010
Bithiopheneimide–Dithienosilole/Dithienogermole Copolymers for Efficient Solar Cells: Information from Structure–Property–Device Performance Correlations and Comparison to Thieno[3,4-c]pyrrole-4,6-dione Analogues
2012
ZnO Nanowire Arrays for Enhanced Photocurrent in PbS Quantum Dot Solar Cells
2013 StandoutNobel
Fullerene derivative acceptors for high performance polymer solar cells
2010
A D–A copolymer of dithienosilole and a new acceptor unit of naphtho[2,3-c]thiophene-4,9-dione for efficient polymer solar cells
2011
Synthesis of a polythieno[3,4-b]thiophene derivative with a low-lying HOMO level and its application in polymer solar cells
2011
Replacing Alkoxy Groups with Alkylthienyl Groups: A Feasible Approach To Improve the Properties of Photovoltaic Polymers
2011
Triplet Exciton Dissociation in Singlet Exciton Fission Photovoltaics
2012 StandoutNobel
Benzo[1,2-b:4,5-b′]dithiophene-dioxopyrrolothiophen copolymers for high performance solar cells
2010
Efficient charge generation by relaxed charge-transfer states at organic interfaces
2013
Interlayer for Modified Cathode in Highly Efficient Inverted ITO‐Free Organic Solar Cells
2012
Influence of the Bridging Atom on the Performance of a Low‐Bandgap Bulk Heterojunction Solar Cell
2009
The role of reticular chemistry in the design of CO2 reduction catalysts
2018 StandoutNobel
Side chain engineering of n-type conjugated polymer enhances photocurrent and efficiency of all-polymer solar cells
2014
Alkyl chain engineering on a dithieno[3,2-b:2′,3′-d]silole-alt-dithienylthiazolo[5,4-d]thiazole copolymer toward high performance bulk heterojunction solar cells
2011
Synthesis, characterization, and photovoltaic properties of a low-bandgap copolymer based on 2,1,3-benzooxadiazole
2011
BODIPY–Thiophene Copolymers as p‐Channel Semiconductors for Organic Thin‐Film Transistors
2013 StandoutNobel
Temperature Dependence of Charge Carrier Generation in Organic Photovoltaics
2015
Semiconducting polymers: the Third Generation
2010 Nobel
Direct Exfoliation of Graphite to Graphene in Aqueous Media with Diazaperopyrenium Dications
2013 StandoutNobel
Gated Electron Sharing Within Dynamic Naphthalene Diimide‐Based Oligorotaxanes
2014 StandoutNobel
Printable organometallic perovskite enables large-area, low-dose X-ray imaging
2017 StandoutNature
Simultaneous Enhancement of Open‐Circuit Voltage, Short‐Circuit Current Density, and Fill Factor in Polymer Solar Cells
2011 Standout
Polymer–Fullerene Bulk‐Heterojunction Solar Cells
2010 Standout
Unraveling Inter‐ and Intrachain Electronics in Polythiophene Assemblies Mediated by Coordination Nanospaces
2015 StandoutNobel
Silicon Atom Substitution Enhances Interchain Packing in a Thiophene‐Based Polymer System
2009
Enhanced electromagnetic shielding behavior of multi-walled carbon nanotube entrenched poly (3,4-ethylenedioxythiophene) nanocomposites
2015
Solution Chemistry of Self-Assembled Graphene Nanohybrids for High-Performance Flexible Biosensors
2010
The effect of polymer solubilizing side-chains on solar cell stability
2015
The Energy of Charge‐Transfer States in Electron Donor–Acceptor Blends: Insight into the Energy Losses in Organic Solar Cells
2009
An All‐Solution Processed Recombination Layer with Mild Post‐Treatment Enabling Efficient Homo‐Tandem Non‐fullerene Organic Solar Cells
2016
Chemical Synthesis and Luminescence Applications of Colloidal Semiconductor Quantum Dots
2017 StandoutNobel
High Performance Photovoltaic Applications Using Solution-Processed Small Molecules
2013
Non-fullerene acceptors for organic solar cells
2018 Standout
High‐Efficiency Nonfullerene Organic Solar Cells: Critical Factors that Affect Complex Multi‐Length Scale Morphology and Device Performance
2016
Side-Chain Isomerization on an n-type Organic Semiconductor ITIC Acceptor Makes 11.77% High Efficiency Polymer Solar Cells
2016
Organic and solution-processed tandem solar cells with 17.3% efficiency
2018 StandoutScience
Performance optimization of low-temperature-annealed solution-processable ZnO buffer layers for inverted polymer solar cells
2013
Dithienopicenocarbazole-Based Acceptors for Efficient Organic Solar Cells with Optoelectronic Response Over 1000 nm and an Extremely Low Energy Loss
2018
Air-Stable Efficient Inverted Polymer Solar Cells Using Solution-Processed Nanocrystalline ZnO Interfacial Layer
2013
Influence of Chemical Structure on the Charge Transfer State Spectrum of a Polymer:Fullerene Complex
2014
Synthesis and Photovoltaic Properties of D–A Copolymers Based on Alkyl-Substituted Indacenodithiophene Donor Unit
2011
In Situ Formation of MoO3 in PEDOT:PSS Matrix: A Facile Way to Produce a Smooth and Less Hygroscopic Hole Transport Layer for Highly Stable Polymer Bulk Heterojunction Solar Cells
2012
Graphene Oxide: Preparation, Functionalization, and Electrochemical Applications
2012 Standout
Synthesis of Light-Emitting Conjugated Polymers for Applications in Electroluminescent Devices
2009 Standout
Optimisation of processing solvent and molecular weight for the production of green-solvent-processed all-polymer solar cells with a power conversion efficiency over 9%
2017
Fused Hexacyclic Nonfullerene Acceptor with Strong Near‐Infrared Absorption for Semitransparent Organic Solar Cells with 9.77% Efficiency
2017
Chiral Redox-Active Isosceles Triangles
2016 StandoutNobel
Tetrathienoanthracene-Based Copolymers for Efficient Solar Cells
2011
Polyamides – Still Strong After Seventy Years
2010
π-Conjugated Polymers for Organic Electronics and Photovoltaic Cell Applications
2010 Standout
Printable Highly Conductive Conjugated Polymer Sensitized ZnO NCs as Cathode Interfacial Layer for Efficient Polymer Solar Cells
2014
Graphene-Based Antibacterial Paper
2010 Standout
Dye-Sensitized Solar Cells
2010 Standout
Efficient Organic Solar Cells with Non‐Fullerene Acceptors
2017
Enhanced open-circuit voltage in polymer solar cells
2009
Controlling the Morphology and Performance of Bulk Heterojunctions in Solar Cells. Lessons Learned from the Benchmark Poly(3-hexylthiophene):[6,6]-Phenyl-C61-butyric Acid Methyl Ester System
2013
Stability of organic solar cells: challenges and strategies
2016
Molecular Design of Photovoltaic Materials for Polymer Solar Cells: Toward Suitable Electronic Energy Levels and Broad Absorption
2012 Standout
Influence of Surface Energy on Organic Alloy Formation in Ternary Blend Solar Cells Based on Two Donor Polymers
2016
A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
2014 StandoutScience
Ternary small molecule solar cells exhibiting power conversion efficiency of 10.3%
2017
All-small-molecule organic solar cells based on an electron donor incorporating binary electron-deficient units
2016
Functionalization of Graphene: Covalent and Non-Covalent Approaches, Derivatives and Applications
2012 Standout
Alloy Acceptor: Superior Alternative to PCBM toward Efficient and Stable Organic Solar Cells
2016
Solution-processed zinc oxide nanoparticles as interlayer materials for inverted organic solar cells
2012
Are we there yet? Design of better conjugated polymers for polymer solar cells
2011
Stability of Organic Solar Cells: The Influence of Nanostructured Carbon Materials
2016
Effects of ultraviolet soaking on surface electronic structures of solution processed ZnO nanoparticle films in polymer solar cells
2014
Interfacial Control Toward Efficient and Low‐Voltage Perovskite Light‐Emitting Diodes
2015
Pronounced Effects of a Triazine Core on Photovoltaic Performance–Efficient Organic Solar Cells Enabled by a PDI Trimer‐Based Small Molecular Acceptor
2016
Synthesis of Acenaphthyl and Phenanthrene Based Fused-Aromatic Thienopyrazine Co-Polymers for Photovoltaic and Thin Film Transistor Applications
2009
Fast charge separation in a non-fullerene organic solar cell with a small driving force
2016
Aqueous Processing of Low-Band-Gap Polymer Solar Cells Using Roll-to-Roll Methods
2011
Alcohol-soluble polyfluorenes containing dibenzothiophene-S,S-dioxide segments for cathode interfacial layer in PLEDs and PSCs
2014
Conjugated Polymer Photovoltaic Materials with Broad Absorption Band and High Charge Carrier Mobility
2008
Photovoltaic Performance Improvement of D–A Copolymers Containing Bithiazole Acceptor Unit by Using Bithiophene Bridges
2011
Side-Chain Engineering of Isoindigo-Containing Conjugated Polymers Using Polystyrene for High-Performance Bulk Heterojunction Solar Cells
2013
“Hot or cold”: how do charge transfer states at the donor–acceptor interface of an organic solar cell dissociate?
2015
Terthiophene-Based D–A Polymer with an Asymmetric Arrangement of Alkyl Chains That Enables Efficient Polymer Solar Cells
2015
Aggregation-Induced Emission: Together We Shine, United We Soar!
2015 Standout
Charge carrier recombination in organic solar cells
2013
Significant Influence of the Methoxyl Substitution Position on Optoelectronic Properties and Molecular Packing of Small‐Molecule Electron Acceptors for Photovoltaic Cells
2017
High-performance semi-transparent polymer solar cells possessing tandem structures
2013
Quantifying Losses in Open-Circuit Voltage in Solution-Processable Solar Cells
2015
Improved mobility and lifetime of carrier for highly efficient ternary polymer solar cells based on TIPS-pentacene in PTB7: PC 71 BM
2015
Highly Efficient Solar Cell Polymers Developed via Fine-Tuning of Structural and Electronic Properties
2009
Molecular Design and Ordering Effects in π-Functional Materials for Transistor and Solar Cell Applications
2011
Controlling Solution‐Phase Polymer Aggregation with Molecular Weight and Solvent Additives to Optimize Polymer‐Fullerene Bulk Heterojunction Solar Cells
2014
Synthesis and Photovoltaic Properties of a Novel Low Band Gap Polymer Based on N-Substituted Dithieno[3,2-b:2′,3′-d]pyrrole
2008
Rational Design of High Performance Conjugated Polymers for Organic Solar Cells
2012
Modulating the Molecular Packing and Nanophase Blending via a Random Terpolymerization Strategy toward 11% Efficiency Nonfullerene Polymer Solar Cells
2017
Quantum‐Dot Light‐Emitting Diodes for Large‐Area Displays: Towards the Dawn of Commercialization
2017
Synthesis and Photovoltaic Properties of D–A Copolymers Based on Dithienosilole and Benzotriazole
2011
Donor−Acceptor Polymers Incorporating Alkylated Dithienylbenzothiadiazole for Bulk Heterojunction Solar Cells: Pronounced Effect of Positioning Alkyl Chains
2009
High Performance All‐Polymer Solar Cell via Polymer Side‐Chain Engineering
2014
Benzobisthiazole as Weak Donor for Improved Photovoltaic Performance: Microwave Conductivity Technique Assisted Molecular Engineering
2013
Efficient Polymer Solar Cells with Thin Active Layers Based on Alternating Polyfluorene Copolymer/Fullerene Bulk Heterojunctions
2009
Spontaneous interface engineering for dopant-free poly(3-hexylthiophene) perovskite solar cells with efficiency over 24%
2021
Improved Performance of Ternary Polymer Solar Cells Based on A Nonfullerene Electron Cascade Acceptor
2016
From Fullerene–Polymer to All-Polymer Solar Cells: The Importance of Molecular Packing, Orientation, and Morphology Control
2016
Compositional and Electric Field Dependence of the Dissociation of Charge Transfer Excitons in Alternating Polyfluorene Copolymer/Fullerene Blends
2008
9.73% Efficiency Nonfullerene All Organic Small Molecule Solar Cells with Absorption-Complementary Donor and Acceptor
2017
Ladder-Type Nonacyclic Structure Consisting of Alternate Thiophene and Benzene Units for Efficient Conventional and Inverted Organic Photovoltaics
2011
Polymer solar cells with enhanced open-circuit voltage and efficiency
2009 Standout
Binary additives synergistically boost the efficiency of all-polymer solar cells up to 3.45%
2013
Luminescent Functional Metal–Organic Frameworks
2011 Standout
Harvesting the Full Potential of Photons with Organic Solar Cells
2015
Applications of functional fullerene materials in polymer solar cells
2014
Synthesis and Characterization of a Copolymer Based on Thiazolothiazole and Dithienosilole for Polymer Solar Cells
2011
Molecular Design of Benzodithiophene-Based Organic Photovoltaic Materials
2016
Silole‐Containing Polymers: Chemistry and Optoelectronic Properties
2007
Bandgap and Molecular Level Control of the Low-Bandgap Polymers Based on 3,6-Dithiophen-2-yl-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione toward Highly Efficient Polymer Solar Cells
2009
Electroluminescence performances of 1,1-bis(4-(N,N-dimethylamino)phenyl)-2,3,4,5-tetraphenylsilole based polymers in three cathode architectures
2013
A Solution‐Processable Electron Acceptor Based on Dibenzosilole and Diketopyrrolopyrrole for Organic Solar Cells
2013
Semiconducting π-Conjugated Systems in Field-Effect Transistors: A Material Odyssey of Organic Electronics
2011 Standout
Scalable fabrication of efficient organolead trihalide perovskite solar cells with doctor-bladed active layers
2015
BODIPY-Based Donor–Acceptor π-Conjugated Alternating Copolymers
2011
Side Chain Engineering in Solution-Processable Conjugated Polymers
2013
Development of Novel Conjugated Donor Polymers for High-Efficiency Bulk-Heterojunction Photovoltaic Devices
2009
High-Efficiency Polymer Solar Cells via the Incorporation of an Amino-Functionalized Conjugated Metallopolymer as a Cathode Interlayer
2013
Alternating Copolymers of Cyclopenta[2,1‐b;3,4‐b′]dithiophene and Thieno[3,4‐c]pyrrole‐4,6‐dione for High‐Performance Polymer Solar Cells
2011
Interface engineering of highly efficient perovskite solar cells
2014 StandoutScience
Creation of Bifunctional Materials: Improve Electron‐Transporting Ability of Light Emitters Based on AIE‐Active 2,3,4,5‐Tetraphenylsiloles
2014
Nonfullerene Acceptor Molecules for Bulk Heterojunction Organic Solar Cells
2018 Standout
Highly efficient organic tandem solar cells: a follow up review
2013
Mechanical Stabilization of Helical Chirality in a Macrocyclic Oligothiophene
2019 StandoutNobel
High‐Yield Synthesis and Electrochemical and Photovoltaic Properties of Indene‐C70 Bisadduct
2010
High-mobility low-bandgap conjugated copolymers based on indacenodithiophene and thiadiazolo[3,4-c]pyridine units for thin film transistor and photovoltaic applications
2011
Solution-processed cross-linkable hole selective layer for polymer solar cells in the inverted structure
2010 Nobel
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
2013 StandoutScience
Limits for Recombination in a Low Energy Loss Organic Heterojunction
2016
Tailoring Structure−Property Relationships in Dithienosilole−Benzothiadiazole Donor−Acceptor Copolymers
2009
Research opportunities to advance solar energy utilization
2016 StandoutScience
Suppression of Thermally Induced Fullerene Aggregation in Polyfullerene-Based Multiacceptor Organic Solar Cells
2017
BODIPY-based conjugated polymers for broadband light sensing and harvesting applications
2012
Small Bandgap Polymers for Organic Solar Cells(Polymer Material Development in the Last 5 Years)
2008
Electromagnetic interference shielding with 2D transition metal carbides (MXenes)
2016 StandoutScience
Reducing Voltage Losses in Cascade Organic Solar Cells while Maintaining High External Quantum Efficiencies
2017
High‐Performance Colorful Semitransparent Polymer Solar Cells with Ultrathin Hybrid‐Metal Electrodes and Fine‐Tuned Dielectric Mirrors
2017
Conjugated Oligomers and Polymers Containing Dithienosilole Units
2009
Imide- and Amide-Functionalized Polymer Semiconductors
2014
Recent trends in polymer tandem solar cells research
2013
Two compatible nonfullerene acceptors with similar structures as alloy for efficient ternary polymer solar cells
2017
Tailoring side chains of low band gap polymers for high efficiency polymer solar cells
2010
Interfacial Trap‐Assisted Triplet Generation in Lead Halide Perovskite Sensitized Solid‐State Upconversion
2021 StandoutNobel
Synthesis and Characterization of Dioctyloxybenzo[1,2-b:4,3-b′]dithiophene-Containing Copolymers for Polymer Solar Cells
2011
Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure
2012 Standout
Extracting Information about the Electronic Quality of Organic Solar-Cell Absorbers from Fill Factor and Thickness
2016
Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite Absorber
2013 StandoutScience
Nanomorphology and Charge Generation in Bulk Heterojunctions Based on Low‐Bandgap Dithiophene Polymers with Different Bridging Atoms
2010
Phosphonate-Functionalized Donor Polymer as an Underlying Interlayer To Improve Active Layer Morphology in Polymer Solar Cells
2014
Donor–Acceptor Conjugated Polymer Based on Naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole for High-Performance Polymer Solar Cells
2011
Multiple Cases of Efficient Nonfullerene Ternary Organic Solar Cells Enabled by an Effective Morphology Control Method
2017
A Thieno[3,4-c]pyrrole-4,6-dione-Based Copolymer for Efficient Solar Cells
2010
All polymer photovoltaics: From small inverted devices to large roll-to-roll coated and printed solar cells
2013
Benzo[1,2-b:4,5-b′]difuran-Based Donor–Acceptor Copolymers for Polymer Solar Cells
2012
Design, synthesis, and structural characterization of the first dithienocyclopentacarbazole-based n-type organic semiconductor and its application in non-fullerene polymer solar cells
2017
What Controls the Rate of Ultrafast Charge Transfer and Charge Separation Efficiency in Organic Photovoltaic Blends
2016
Thick Film Polymer Solar Cells Based on Naphtho[1,2‐c:5,6‐c]bis[1,2,5]thiadiazole Conjugated Polymers with Efficiency over 11%
2017
Recent development in 2D materials beyond graphene
2015
PBDTTTZ: A Broad Band Gap Conjugated Polymer with High Photovoltaic Performance in Polymer Solar Cells
2011
Siloxane-Terminated Solubilizing Side Chains: Bringing Conjugated Polymer Backbones Closer and Boosting Hole Mobilities in Thin-Film Transistors
2011
Next-generation organic photovoltaics based on non-fullerene acceptors
2018 Standout
Comparison of additive amount used in spin-coated and roll-coated organic solar cells
2014
Versatile third components for efficient and stable organic solar cells
2015
Recent Advances in Ultrathin Two-Dimensional Nanomaterials
2017 Standout
Wide Band Gap and Highly Conjugated Copolymers Incorporating 2-(Triisopropylsilylethynyl)thiophene-Substituted Benzodithiophene for Efficient Non-Fullerene Organic Solar Cells
2017
Benzobis(silolothiophene)-Based Low Bandgap Polymers for Efficient Polymer Solar Cells
2010
Low‐Bandgap Donor/Acceptor Polymer Blend Solar Cells with Efficiency Exceeding 4%
2013
Discovery of blue singlet exciton fission molecules via a high-throughput virtual screening and experimental approach
2019 StandoutNobel
Two Well‐Miscible Acceptors Work as One for Efficient Fullerene‐Free Organic Solar Cells
2017
Low Open-Circuit Voltage Loss in Solution-Processed Small-Molecule Organic Solar Cells
2016
A New Poly(2,7‐Dibenzosilole) Derivative in Polymer Solar Cells
2007
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
2012 StandoutScience
Lead candidates for high-performance organic photovoltaics from high-throughput quantum chemistry – the Harvard Clean Energy Project
2013
In Situ Characterization of Polymer–Fullerene Bilayer Stability
2015
Low Band‐Gap Conjugated Polymers with Strong Interchain Aggregation and Very High Hole Mobility Towards Highly Efficient Thick‐Film Polymer Solar Cells
2014
Bulk heterojunction solar cells with internal quantum efficiency approaching 100%
2009 StandoutNobel
Room-temperature solution-processed molybdenum oxide as a hole transport layer with Ag nanoparticles for highly efficient inverted organic solar cells
2013
Singlet Exciton Fission-Sensitized Infrared Quantum Dot Solar Cells
2012
Intrinsic non-radiative voltage losses in fullerene-based organic solar cells
2017
High-efficiency solution-processed perovskite solar cells with millimeter-scale grains
2015 StandoutScience
Recent Advances in Bulk Heterojunction Polymer Solar Cells
2015 Standout
Comparison of Two D−A Type Polymers with Each Being Fluorinated on D and A Unit for High Performance Solar Cells
2014
Homo‐Tandem Polymer Solar Cells with VOC >1.8 V for Efficient PV‐Driven Water Splitting
2016
Synthesis, Characterization, and Photovoltaic Properties of a Low Band Gap Polymer Based on Silole-Containing Polythiophenes and 2,1,3-Benzothiadiazole
2008
Germafluorenes: New Heterocycles for Plastic Electronics
2010
Synthetic Principles Directing Charge Transport in Low-Band-Gap Dithienosilole–Benzothiadiazole Copolymers
2012
Highly Efficient Inverted Polymer Solar Cells Based on an Alcohol Soluble Fullerene Derivative Interfacial Modification Material
2012
Origin of the enhanced open-circuit voltage in polymer solar cells via interfacial modification using conjugated polyelectrolytes
2010
N-Acyldithieno[3,2-b:2′,3′-d]pyrrole-Based Low-Band-Gap Conjugated Polymer Solar Cells with Amine-Modified [6,6]-Phenyl-C61-butyric Acid Ester Cathode Interlayers
2013
Conductive Water/Alcohol-Soluble Neutral Fullerene Derivative as an Interfacial Layer for Inverted Polymer Solar Cells with High Efficiency
2014
Origin of Reduced Bimolecular Recombination in Blends of Conjugated Polymers and Fullerenes
2013
Thermally Activated Delayed Fluorescence Materials Towards the Breakthrough of Organoelectronics
2014 Standout
Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes
2015 StandoutScience
Quantitative Morphology–Performance Correlations in Organic Solar Cells: Insights from Soft X‐Ray Scattering
2017
Bulk Heterojunction Solar Cells: Morphology and Performance Relationships
2014 Nobel
Enhanced Organic Solar Cell Stability by Polymer (PCPDTBT) Side Chain Functionalization
2015
Recent Progress in Polymer Solar Cells: Manipulation of Polymer:Fullerene Morphology and the Formation of Efficient Inverted Polymer Solar Cells
2009
Highly efficient charge-carrier generation and collection in polymer/polymer blend solar cells with a power conversion efficiency of 5.7%
2014
Diluting concentrated solution: a general, simple and effective approach to enhance efficiency of polymer solar cells
2015
Combination of Indene-C60 Bis-Adduct and Cross-Linked Fullerene Interlayer Leading to Highly Efficient Inverted Polymer Solar Cells
2010
Organometal Halide Perovskite Solar Cell Materials Rationalized: Ultrafast Charge Generation, High and Microsecond-Long Balanced Mobilities, and Slow Recombination
2014
Synthesis, Characterization, Charge Transport, and Photovoltaic Properties of Dithienobenzoquinoxaline- and Dithienobenzopyridopyrazine-Based Conjugated Polymers
2011
Synthesis of Conjugated Polymers for Organic Solar Cell Applications
2009 Standout
Works of Ergang Wang being referenced
Semi‐Transparent Tandem Organic Solar Cells with 90% Internal Quantum Efficiency
2012
Fluorine substitution enhanced photovoltaic performance of a D–A1–D–A2 copolymer
2013
An isoindigo-based low band gap polymer for efficient polymer solar cells with high photo-voltage
2011
An Easily Synthesized Blue Polymer for High‐Performance Polymer Solar Cells
2010
Low Band Gap Polymer Solar Cells With Minimal Voltage Losses
2016
Electron and Hole Contributions to the Terahertz Photoconductivity of a Conjugated Polymer:Fullerene Blend Identified
2012
Open circuit voltage and efficiency in ternary organic photovoltaic blends
2015
Influence of Molecular Weight on the Performance of Organic Solar Cells Based on a Fluorene Derivative
2010
High-performance polymer heterojunction solar cells of a polysilafluorene derivative
2008
25th Anniversary Article: Isoindigo‐Based Polymers and Small Molecules for Bulk Heterojunction Solar Cells and Field Effect Transistors
2014
Solution-Processed Zinc Oxide Thin Film as a Buffer Layer for Polymer Solar Cells with an Inverted Device Structure
2010
Structure–property relationships of oligothiophene–isoindigo polymers for efficient bulk-heterojunction solar cells
2013
A Facile Method to Enhance Photovoltaic Performance of Benzodithiophene‐Isoindigo Polymers by Inserting Bithiophene Spacer
2013
From spin coating to doctor blading: A systematic study on the photovoltaic performance of an isoindigo-based polymer
2014
An Easily Accessible Isoindigo-Based Polymer for High-Performance Polymer Solar Cells
2011
Synthesis and characterization of benzodithiophene–isoindigo polymers for solar cells
2011
Conformational Disorder Enhances Solubility and Photovoltaic Performance of a Thiophene–Quinoxaline Copolymer
2013
Molecular Doping and Trap Filling in Organic Semiconductor Host–Guest Systems
2017
One-Step Synthesis of Precursor Oligomers for Organic Photovoltaics: A Comparative Study between Polymers and Small Molecules
2015
Influence of Incorporating Different Electron-Rich Thiophene-Based Units on the Photovoltaic Properties of Isoindigo-Based Conjugated Polymers: An Experimental and DFT Study
2013
High Performance All-Polymer Solar Cells by Synergistic Effects of Fine-Tuned Crystallinity and Solvent Annealing
2016
Light-harvesting capabilities of low band gap donor–acceptor polymers
2014
A dual ternary system for highly efficient ITO-free inverted polymer solar cells
2015
Poly(3,6-silafluorene-co-2,7-fluorene)-based high-efficiency and color-pure blue light-emitting polymers with extremely narrow band-width and high spectral stability
2006
Fullerene mixtures enhance the thermal stability of a non-crystalline polymer solar cell blend
2014
Mapping fullerene crystallization in a photovoltaic blend: an electron tomography study
2015
Structural tuning of quinoxaline-benzodithiophene copolymers via alkyl side chain manipulation: synthesis, characterization and photovoltaic properties
2014
Environment‐friendly synthesis of long chain semiaromatic polyamides with high heat resistance
2009
Enhance performance of organic solar cells based on an isoindigo-based copolymer by balancing absorption and miscibility of electron acceptor
2011
Nucleation-limited fullerene crystallisation in a polymer–fullerene bulk-heterojunction blend
2013
Influences of Surface Roughness of ZnO Electron Transport Layer on the Photovoltaic Performance of Organic Inverted Solar Cells
2012
An alternating D–A1–D–A2 copolymer containing two electron-deficient moieties for efficient polymer solar cells
2013
Low‐Temperature Combustion‐Synthesized Nickel Oxide Thin Films as Hole‐Transport Interlayers for Solution‐Processed Optoelectronic Devices
2013
D–A1–D–A2 Copolymers with Extended Donor Segments for Efficient Polymer Solar Cells
2015
Sub-glass transition annealing enhances polymer solar cell performance
2013
High-efficiency red and green light-emitting polymers based on a novel wide bandgap poly(2,7-silafluorene)
2008
Effects of side chain isomerism on the physical and photovoltaic properties of indacenodithieno[3,2-b]thiophene–quinoxaline copolymers: toward a side chain design for enhanced photovoltaic performance
2014
Ternary Organic Solar Cells with Minimum Voltage Losses
2017
Side-Chain Architectures of 2,7-Carbazole and Quinoxaline-Based Polymers for Efficient Polymer Solar Cells
2011
Pyrrolo[3,4-g]quinoxaline-6,8-dione-based conjugated copolymers for bulk heterojunction solar cells with high photovoltages
2015
Lateral Phase Separation Gradients in Spin‐Coated Thin Films of High‐Performance Polymer:Fullerene Photovoltaic Blends
2011
Fullerene Nucleating Agents: A Route Towards Thermally Stable Photovoltaic Blends
2014
Efficient infiltration of low molecular weight polymer in nanoporous TiO2
2010
Donor Polymers Containing Benzothiadiazole and Four Thiophene Rings in Their Repeating Units with Improved Photovoltaic Performance
2009
9.0% power conversion efficiency from ternary all-polymer solar cells
2017
Enhanced Photovoltaic Performance of Indacenodithiophene‐Quinoxaline Copolymers by Side‐Chain Modulation
2014
Conjugated polymers based on benzodithiophene and fluorinated quinoxaline for bulk heterojunction solar cells: thiophene versus thieno[3,2-b]thiophene as π-conjugated spacers
2013
Ternary organic solar cells with enhanced open circuit voltage
2017
Synthesis of Quinoxaline-Based Donor−Acceptor Narrow-Band-Gap Polymers and Their Cyclized Derivatives for Bulk-Heterojunction Polymer Solar Cell Applications
2011
Small Band Gap Polymers Synthesized via a Modified Nitration of 4,7-Dibromo-2,1,3-benzothiadiazole
2010
Quantification of Quantum Efficiency and Energy Losses in Low Bandgap Polymer:Fullerene Solar Cells with High Open‐Circuit Voltage
2012
Low bandgap polymers synthesized by FeCl3 oxidative polymerization
2010
Ultrafast Terahertz Photoconductivity of Bulk Heterojunction Materials Reveals High Carrier Mobility up to Nanosecond Time Scale
2012
Flexible Carbon Nanotube−Polymer Composite Films with High Conductivity and Superhydrophobicity Made by Solution Process
2008